Bicycle Accessories
V
LIMITED
TORONTO,
CANADA
TO THE TRADE
/// presenting this our SIXTH ANNUAL CATALOGUE
of BICYCLE ACCESSORIES, COMPONENT PARTS, etc.,
issued for the benefit of BICYCLE DEALERS, MANUFAC-
TURERS and REPAIR MEN, we beg to call special attention to
the many new lines we are now handling, many of which we are
SOLE AGENTS for.
GUARANTEED GOODS are sold only on Maker s Guar-
antee ; we assume no personal liability.
IN ORDERING give full particulars. It will often save
correspondence and delay by referring to Figures and Numbers in
Catalogue. Parties not having an account will please, remit witli
order, and if goofis are to be sent by mail include sufficient for post-
age. GOODS OR SAMPLES ORDERED OR RETURNED,
BY MAIL ARE AT CUSTOMERS RISK.
TERMS: NET CASH.
RICE LEWIS & SON,
Limited
TORONTO, February, 1900.
'
B. S. A. FITTINGS
NICKEL-PLATED POINTS. - FULL MACHINED.
No.
NO. y
Rear Fork and Back Stay Ends
for D tubes, and Chain adjusters.
Per set, $2.15.
Gents' Ball Head, 1$ or
Sizes 7 to 9f ".
Each, $6.30.
Ladies' Ball Head,
Sizes 7 to 9"
Each, $6.80.
No.
Gents' Seat Post Lug and
N.P. Bolt, 1 x 1".
Each, $1.00.
No.
Rear Fork and Lower Back Stay
End and Chain Adjusters.
Machined ^jand f", round tubes.
Per pair, $1.20.
Ladies' Seat Post Lug and
N.P. Bolt, 1|".
Each, $1.00.
No. 11
Ladies' Top Tube Lug,
Each, $1.00.
No. 6
Rubber Pedal.
No.
Front Hub.
No. 5
Bottom Bracket
for Ladies' or
Gents' Frames,
5" tread.
16 to 20 teeth, each $7.00
sprockets over 20 teeth,
add 25c. tooth to list.
No. 7
ZKi
Rat-trap Pedal.
No.
Rear Hub.
SETS OF B. S. A. FITTINGS
MACHINED READY FOR TUBES WITH NICKEL-PLATED POINTS
B. S. A. SET No. 1
Gents' or ladies' roadster frame, consisting of bottom bracket (No. 5), 16 to 20 teeth ; ball head
(No. 1), seat post lug with nickel-plated bolt (No. 3), D pattern rear fork ends with nickel-plated chain
adjusters and D pattern back stay ends (No. 8), pair of hubs (Nos. 12 and 13), 7 or 8 teeth ; D pattern
weldless rear forks and back stay tubes (Nos. 85 and 86) PRICE PER SET, $20.00
B. S. A. SET No. 2
Gents' or ladies' roadster, frame for round rear tubes, consisting of bottom bracket (No. 5), 16 to 20
teeth ; ball head (No. 1), seat post lug with nickel-plated bolt (No. 3), rear fork ends with nickel-plated
chain adjusters and lower back stay end (No. 10), pair of hubs (Nos. 12 and 13) PRICE PER SET, $18.00.
SIZE OF TUBING
For gents', 1" top, 1" lower and down tubes, f" rear forks. For ladies', 1" top, lower and down
tubes, " rear forks.
B.S.A. SUNDRY PARTS
FOR REPAIRS ONLY
Back hub cups each,
Front hub cups "
Back hub cones "
Front hub cones "
Back hub nuts "
Front hub nuts "
Back hub spindle and cones complete "
Front // "
Back hub lock nuts "
Hub chain wheel, 7 teeth "
9
10
Bottom bracket wheels and cranks combined,
16 to 20 teeth
,. '21 teeth ....
n 22 *
,' 23
-24
Plain cranks, 6 or 6> inches long-
Crank cotter pins and nuts ....
Crank end screws
Spindles for bottom brackets
Bottom bracket body
Bottom bracket locking pin and nut
Bottom bracket cups
$0 35
25
40
25
05
05
1 00
75
20
80
80
1 00
1 20
3 00
3 2f>
3 50
3 80
Fork end back stay screws each, $0
Seat-lug- bolt, complete with nut and washer
Seat-lug nuts
n washers
Ball head top lug-
n bottom lug
Ball head, inside rings
n bottom socket rings
Handle-bar clips complete
Ball head bolt, complete with nut
n n nuts
n lock nuts
n lock washers and lamp brackets, com-
bined "
Chain adjusters, N.P per pair,
n nuts ..... each,
n n caps
Hub steps
Bottom bracket oil cups
Pedal pins
centres
a cones
n locking nuts
/ side plates ....
n ends
n dust caps
05
30
10
or.
60
7.">
20
30
50
25
10
30
60
().->
10
40
15
60
60
30
or.
15
50
TRADE
A
B.S.A.
MARK None Genuine without this Trade Mark TRADE
HARE
B.S.A.
SETS ELECTRICALLY WELDED STEEL FITTINGS
COMPLETE WITH SEAMLESS TUBES AND FORKS
STOCK SIZES FOR; FRAMES
22, 23)4 and 26 inches.
For 28" wheels, flush joint construc-
tion, with seat post cluster.
Drop 2)4", Wheel Base 44".
D rear forks, fa", tapered to #" at
fork end.
D rear stays curved fa", tapered to
#"at fork end and ^$" at top end.
Tread, 4#".
Tubing, l^"head, 1)4" main frame,
fa" rear forks, and fa" tapered
rear stays.
MODEL 26 FITTINGS
22 -inch Frame. Gents' Shouldered Flush Joint, 28-inch Wheels.
No.
C-12
E-10
G-3
O-2
F-ll
B-4
B-23
B-44
B-63
B-84
A-3
Upper and lower, 112^ flush head, l# x I fa", fitted
with head lugs.
Seat post cluster 71 x 53% I fa x I fa".
Rear fork ends (pair), #"18 gauge x #"20 gauge.
Chain adjusters (pair), forged pattern.
Hanger Bracket 64 front x 63^ rear I fa x I fa x fa".
Hanger cups (pair), with 04 ball retainer.
Hanger cone (adj.), tapped, .87f>" 28 pitch (left).
Hanger cone (sta.), tapped, .875" 30 pitch (right).
Hanger locknut, tapped, .875" 28 pitch (left).
Hanger washer (check), and 26 steel balls ,*/' .J
Handle-bar clamp.
No.
A-ll Bolt and nut for H. B.C.
A -22 Head locknut, tapped, 1" 24 pitch.
A-31 Head washer (check).
A-41 Upper head cone, tapped, 1" 24 pitch.
A-51 Upper head cup for 22 ,V balls.
A-61 Lower head cups for 23 ,", ; " balls.
A-71 Lower head cone, and 4) steel balls
1-5 Head stem, 16 gauge, thread 1" 24 pitch.
J-4 Arch crown, forged pattern.
K-4 Forksides (pair), 1" x 19 gauge 2)4" throw.
L-2 Hubs (pair), drilled 32 x 36 with sprocket.
P-9 2 arch struts for forks and stays.
MODEL 27 FITTINGS
STOCK SIZES FOR FRAMES
21 and 23)4 inches.
NOTE MODEL No. 27 use same fit-
tings as No. 26, substituting for
C-12, lug C-1T> ; for E-10, lug
E-13 ; and add centre lug D-5.
Sets as above with Thompson's No. 2 two-piece Crank Hanger, Nickel-Plated, sprockets up to 26-tooth per set, $10 Oil
" Fauber Patent one-piece Special " " " " " 1300
Standard " " " " "14 (HI
Add 15c. for every additional two teeth.
SETS ELECTRICALLY WELDED STEEL FITTINGS
COMPLETE WITH SEAMLESS TUBES AND FORKS
STOCK SIZES FOR FRAMES
22, 23 ' 2 and 26 inches.
For 28" wheels, flush joint construc-
tion, with seat post cluster.
Drop, 2^", Wheel Base
Oval rear forks,
at fork end.
Oval rear stays
at top end.
Tread, 4%".
Tubing
tapered to
tapered to
" head,
forks, and
stays.
^ main frame,
" tapered rear
MODEL 4O FITTINGS
22-inch Frame. Gents' Shouldered Flush Joint. 28-inch Wheels.
No.
W-21 112X 1 flush head 1# x \%".
E-26 Seat post cluster 71 \ 54^ l/>i x l/^"-
G-3 Rear fork ends (pair), } a 18 gauge x }" 20 gauge.
O-2 Chain adjusters (pair), forged pattern.
F-15 Hanger Bracket 64 front x63J^ rear l^j x l^j x %"
B-4 Hanger cups (pair), with 04 ball retainer.
B-23 Hanger cone (adj.), tapped, .875" 28 pitch (left).
B-44 Hanger cone (sta.), tapped, .875" 30 pitch (right).
B-63 Hanger locknut, tapped, .875" 28 pitch (left).
B-S4 Hanger washer (check), and 26 steel balls ,',.'
A-3 Handle-bar clamp.
A-ll Bolt and nut for H. B. C.
No.
A -22 Head locknut, tapped, 1" 24 pitch.
A-31 Head washer (check).
A-41 Upper head cone, tapped, 1" 24 pitch.
A-51 Upper head cup for '22 ,",.," balls.
A-61 Lower head cups for 23 r y balls.
A-71 Lower head cone and 45 steel balls ^".
1-5 Head stem, 16 gauge, thread, 1" 24 pitch.
J-7 Arch crown, hollow, forged pattern.
K-4 Forksides (pair), I" x 19 gauge 2)4" throw.
L-6 Hubs (pair), drilled, 32 x 36 with sprocket.
P-9 2 arch struts for forks and stays.
MODEL 41 FITTINGS
STOCK SIZES FOR FRAMES
21 and 23)4 inches.
NOTE MODEL No. 41 use same fit-
tings as No. 40, substituting for
W-21, head W-24 ; for E-26, lug
E-29 ; and add flush centre
thimble.
Sets as above with Thompson's Xo. 2 two-piece Crank Hanger, Nickel-Plated, sprockets up to 26-tooth per set $12 M)
" Fauber Patent one-piece Special " " " " " 13 50
" " " Standard " " " " " 1450
Add 15c. for every additional two teeth.
See Page Six for Head and Seat Lugs, as used on above sets.
SETS STEEL FITTINGS
COMPLETE WITH SEAMLESS TUBES AND FORKS
MODEL NO. 51 Ladies' Shouldered Flush Joint 28-Inch Wheels
STOCK SIZES FOR FRAMES 21 and 23*4 inches.
No.
F
E-13
G-3
O-2
's
7-in. Ladies' Flush Head 116 x 48 size l^j x 1
Seat post cluster 55^ \ l /%".
Rear fork ends (pair), ^" 18 gauge x ^" 20 gauge.
Chain adjusters (pair), forged pattern.
Fauber Special Crank Bracket 110 front x 63 rear
1 x I x 7".
No.
Fauber hanger cups (pair), with ball retainer,
" hanger cone (adj.)
" hanger cone (sta.)
" hanger locknut, tapped.
" hanger washer (check), steel balls ,"',.
A-3 Handle-bar clamp.
A-ll Bolt and nut for H. B. C.
A-22 Head locknut, tapped, 1" 24 pitch.
A-31 Head washer (check).
A-41 Upper head cone, tapped, 1" 24 pitch.
A-f>l Upper head cup for 22 -, :1 " balls.
A-61 Lower head cups for 23 VV' balls.
A-71 Lower head cone and 45 steel balls T V'
I-o Head stem, 16 gauge, thread, 1" 24 pitch.
J-4 Arch crown, forged pattern.
K-4 Forksides (pair), 1" x 19 gauge 2^" throw.
L-2 Hubs (pair), drilled 32 x 36 with sprocket.
P-9 2 arch struts for forks and stays.
Sets as above with Fauber Patent one-piece Special Xickel-Plated
Crank Hanger, sprockets up to 26-tooth per set, $14.50
Sets as above with Fauber Patent one-piece Standard Nickel-Plated
Crank Hanger, sprockets up to 26-tooth per set, $15.50
Add 15c. for every additional two-teeth.
HEAD AND SEAT CLUSTERS AS SUPPLIED WITH SETS
Nos. 40 AND 41 ONLY.
BRACKETS
THOMPSON
No. 2
TWO-PIECE
CRANK
HANGER
B.S. A
This outfit con-
sists of L Crank,
Sprocket, Loose
Crank with Lock-
nut.
Furnished
Sprockets for ^,-in.
chain, from 20 to 30
Tooth.
Diamond Cranks,
Ladies', 6^ inch ;
Gents', 7 inch.
Price, Bracket
complete, up to 26
Tooth, each, $4.25
Price of Cranks,
Axle and Sprocket,
up to 26 Tooth.
Per set. $3.00.
No. 1ft
B.S. A.
BRACKET
COMPLETE
16 to 20 teeth, each $7.00
For Sprockets over 20 teeth,
add 2f>c. to list for
each tooth.
Square Cranks, end /,", 20 threads.
N.P. CRANK SHAFT FITTING
*^i\ vJ
No-B 63 Locknut.
Each, 6c.
No. B-84 Washer.
Each, 3c.
No. B-4 Hanger Cup
for 13- ,V Balls.
Each, l">c.
No. 04 Ball Retainer
for No. B-4 Hanger
Cup.
No. B-4 Hanger Cup
and No. 04 Ball Re-
tainer. Each, loc.
No. B-23 Adjusting
Cone. Each, 2oc.
No. B-44 Stationary
Cone. Each, 2. r >c.
Sets Crank Shaft Fittings. 6 pieces, N.P., as above,
per set, 85c.
Adjusting Cone and Lock-nut tapped .87-V _>:
pitch (left), Stationary Cone tapped
.NTH' 3d pitch (right).
Only the Genuine Bear these Trade Marks
W. H FAUBER BICYCLE HANGERS
THE STANDARD HANGER FAUBER ECCENTRIC HANGERS
Eccentric and Bracket made of Drawn Sheet Steel.
Light and Strong. Adjustment Simple.
Secured by Double Positive Locking Device.
Lugs Adjustable to any Angle or Combination of Tube Sizes.
THREE LUG BRACKETS
Flush Joint only.
Front and Middle Lugs IJ/g and L
* Rear Lugs 1 ^ only.
(Rear Lugs match Fauber Forks)
Tread .4# *Chain Line IV
Tread 4 \ Chain Line I 'v
FOUR-LUG BRACKETS
Flush Joint 1% x %'
*Flush Joint 1 <
Flush Joint 1 x ^'
Outside Joint I /^ x J4'
Outside Joint 1 ' s x $ ,
Outside Joint I x %'
SPECIAL FOUR-LUG FLUSH BRACKET
For Ladies' Frame with Curved Lower Bar.
Flush Joint .... I ' s x
Tread, 1 %" or 1 y&" T . . II . . .) .Y7)
Tread, 1" 4%" or
Chain Line, 1 ]^" or 1 }s"
Chain Line, 1" \yk" or 1
ANGLES
Three and Four Lug Brackets.
Front Rear
-'2" Drop, 63 153
3" " 61 6L
3', to 4", 30 in. wheels " 61' .">!!
Special Ladies' Curved Lower Bar.
*-2y 2 " Drop, 111) 63
Up to 26-Tooth Sprockets each, S5.OO
Adil I.V. for ever\- addditional two teeth.
SPECIAL TAPS
For Re-Tapping Brackets after Brazing.
Right and Left Hand, in pairs, with Mandrell.
SPECIFICATIONS.
All Rear Lugs for lj<jM(i Gauge Tube.
(Match Fauber Forks).
Other Lu-s f For 1 X' 20 or ' 22 Gau & e Tube -
' \ " 1%, 20 or -22
Tread l^ 2 " only. Chain Line 1%"
Up to 26-Tooth Sprockets each, $8.OO
STAR SPROCKET
FIVE-ARM SPROCKET
Sizes Sprockets 20, 22, 24, 25, 26,
N28, 30 and 32.
I Thickness j^.
New Spanner Lock Nut furnished
on all Fauber hangers. i*--^*
DIAMOND CRANK (as on above Brackets)
Stock Sizt;^." All others to order.
'Men's, 6'-,, 7 and 7V
s
'Ladies', 6 and 6^" *Tread, 4^ and
W. H. FAUBER BICYCLE HANGERS
SPECIAL HANGER
THREE ARM
*Sizes Sprockets 22, 24, 20 and 28 x ,",.,"
THREE LUG BRACKETS
Flush Joint only.
Front and Middle Lugs l^g and l%"
Rear Lugs 1 ^> only
(Match Fauber Forks).
Tread 4^ *Chain Line. . . 1^"
Tread 4^" *Chain Line. . . .
FOUR-LUG BRACKETS
Flush Joint } ^ x %"
Flush Joint 1^ x ^"
Flush Joint 1 x %"
Outside Joint l^ x /$"
Outside Joint 1 y$ x ^"
Outside Joint 1 x ^"
Tread for \% and 1^" 4J^"
Chain Line for 1% and 1/4" . . . . 1^6"
Tread for 1 " \i/^ or
Chain Line 1 " 1 ^ or
SPICIAL FOUR-LUG FLUSH
BRACKET
For Ladies' Frame with Curved Lower Bar.
I' lush Joint l^jx %"
ANGLES
Three and Four-Lug Brackets.
Front Rear
Drop, 03 63
" 61 61
I ",30 in. wheels ... " 01' .1!)
-':", Special for Ladies'
Curved Lower Bar .... " 110 (J3
Up to 26 Tooth Sprockets,
each, $4 oo.
Add l">c. for every additional two Teeth.
''Stock Sizes All others to order.
REAR HANGER
Tanciems, Triplets and Quads
Brackets for \%" Tube. Cranks, Diamond Pattern, 6> and 7".
Rear Driving Sprockets, HO and 32 x j^".
Middle Hanger for Triplets and Quads similar to Front, but fitted with two Sprockets
and four Lugs on Brackets.
ONTO.
FRONT HANGER
TANDEM HANGERS
Brackets for \%" Tube only. Cranks, Diamond Pattern, 6)4 and 7'
Front Sprocket, 20 x /,-,. Rear Driving Sprocket, 32 and 34 x #".
Rear Driving Sprocket, Special Star, 32 x tf ".
ROUND CRANK (as on Special Hanger)
*Men's 0^ and 7". *Ladies' and O^"-
ELECTRICALLY WELDED CRANK BRACKETS
BALL HEADS, AND FITTINGS
FOR 3 CROWN CONSTRUCTION
FOR SHOULDERED FLUSH JOINT
No.
Size
Angles
Inside
Dia.
Drop
F-12
IJ^xl XxlX"
61 X Front
61 Rear
1 . 7(57"
3> &
Each, .-><<.-.
No.
Size
Angles
Inside
Dia.
Drop
F-10
i#xi y^'
63^ Front
63XRear
1.767"
2*"
F-ll
l/SXiysXjA"
64 Front
63X Rear
1.767"
2/ 2 "
F-l.">
\ l Axl l Ax7A"
64 Front
1.787"
2^"
|oo;4 ts.ear
Each, 50c.
FOR OUTSIDE JOINT
No.
Size
Angles
Inside
Dia.
Drop
F-2
1 % 'xl X x ji"
65 Front
67K Rear
1.767"
IX"
F-/J
l^xl^x^""
64 Front
1.7H7"
2"
F-6
1/sxl/sx^s"
64 Front
65 % Rear
1.767"
2"
Each, f>0c.
ONE-PIECE HEADS
Measure 1 ,y outside diameter, with branches
made to fit l>g" 22 gauge tubing.
GENTS'
No. A 4 l /"\ong 112Xxll3>^
No. B 5- " 112>^ xll3/ 2
No. C fi" " 112^xll3^
No. D 7" " 112^xll3^
Each, 31 c.
LADIES'
No. E 7X" long o3xll2X
No. F 7X" " 48xll6
Each, 3oc.
Lower Head Cup
Lower Head Cone
No. A-71. Each, 7c.
No. A-->1. Each, lOc.
Head Clamp
No. A-3. Each, l-V.
Head Clamp Bolt,
Nut and Washer
No. A-ll. Each, 7c.
Hexagon Lock
Nut
No. A-22.
Tapped 1", 24 pitch.
Each, 6c.
Head Washer
No. A-31. Each, 3c.
Upper Head Cone,
Adjusting
No. A-41.
Tapped 1", 24 pitch.
Each, loc.
Upper Head Cup
No. A-61. Each, 10c.
No. A Set, complete, 8 pieces, as above per set, 65c
No. B " 6 " A51, 71, 61, 41, 31, 22 35c.
When ordering state whether for one piece Head or Thompson's Fittings
10
CROWNS
No. 22
BOX
CROWN
Showing
Construction
Stamping, for 1" Head Stem and Forksides
Above Crown with pair Brazed Forks to match.
.each, 30c.
" 55c.
MACHINE
DROP-FORGED
HOLLOW-ARCHED
CROWN
For 1" Stem and 1" Forksides.
Each . ...30c
Forging, latest design, for 1" Head
Stem, and Forksides made
of 1" tubing.
Carefully and Accurately Machined.
Each.. ...20c.
No. R, Stamping, for 1" Head
Stem and Forksides.
Each 25c.
No. D
No. D, Malleable, for 1"
Head Stem and
Forksides.
Each . ..I6c.
ALUMINUM
FORK
CROWN TIPS
Assorted patterns.
Per pair 1
No. J-l, tor 1" Stem and " Forksides.
" j.2, i" " i"
Cupped Crown Plate.
With Crown Plate unless otherwise specified.
Each... ...20c.
No. 45, Stamping, for 1" Hea<l Stem
and Forksides.
Each ...SOc.
11
HEAD LUGS
Seamless.
Shouldered Flush Joints
C-lf>
C- 12
C-18
C-22
C-21
S : ze.
/ u -- - / o
1/8 X IX
IK x IX
Each, 18c.
Angle.
deg.
113X
112^
115X
CENTRE LUGS
Outside Seamless.
No.
Size. Angle.
C- 9
l i/ l i/ ro i/
i^xiyg },/
deg.
C-20
iX x i>g iiox
'
C-10
IX x l^jj H2>
1
C-19
iX x IX in>x
'
C- 7
iXxlX H3X
'
C- 8
1 ' 4 x l>s 113X
1
Centre Lugs
D-4
1 ' . x 1 ' , f)9
D-5
\V% K\ 1 A 90
No.
C-2
C-6
c-r>
C-l
D-l
D-3
D 2
Each, 18c.
Outside Two Seams
Size. Angle.
IX x iy s 53^ deg.
Centre Lugs
ill)
90
IX xl#
Each, 6c.
ARCH STRUTS -(Curved)
No. .V202, size X"> to fit %" D Rear Forks
Head Lug One Seam Long.
IX* 1/s- 112X Each, 12c.
HANDLE BAR STEM
No. f Mast, Outside, 1
s.1 Hi "| Down Tube Flush, 1
90
Each, 8c.
HANDLE BAR TEES
5203,
.-)2()4,
.")_>( I."),
.'MI 12,
.-MILS,
.Ml)4,
X " "
X Curved Rear Stays
1^ wide, for Stays
1% " " "
2X " " "
Each, 4c.
Straight Struts
No. 5007 X" x IX" wide
.-,111 IS
Each, 4c.
SEAT POST TEES
No. 110,
Each, 6c.
Flush Joint
No. 4401, l^/x^"' 70
Each, 6c.
No.
<
h, 20c.
CHAIN ADJUSTERS
No. 3410, Forged N.P.
Per doz. pair, $1.00.
Per pair, l'2c.
No. 5027, Chain Adjusters for
Fork Ends. No. G-3
Per pair, 2.">f.
SEAT POST LUGS
CLUSTERS
Gents' Cluster.
Shouldered Flush Joint. Outside on
Mast.
^^Angle. A f \
17 IftxiyixX" 71x53 No.
,, E-10
Each, 2bc.
E-ll fitx IX 71x58 20
Gents'
Shouldered Flush Joint.
Size.
Size.
Angle.
Size Frame.
Gents'
Shouldered Flush Joint.
Size. Angle.
No. 254. . l l /s x iy s x % 71 x 53
Each, 26c.
E-12
y s 71x
Each, 26c.
For Three-Crown Construction
No. Size. Angle. Size Frame.
E-16 Itfxltfxiys 71x53>^ c
Each, 26c.
Ladies
Shouldered Flush Joint.
Size. Angle.
Xo. 8618
Each, 26c.
Ladies' Cluster
Shouldered Flush Joint.
Each, 2(ic.
Size. Angle.
l & X < 4 .V,
ON
Ladies' Cluster
Shouldered Flush Joint.
iy& x 55 !^ ' for 21" Frame.
Each, 26c.
Gents' Outside.
No. Size. Angle.
E-s iy s x iy s 71
4SIIU l%xiy s 71
4S.-.H IXxlX 71
Each, 21 c.
N. P. BOLT AND NUT FOR
SEAT POST LUGS
Gents' Shouldered Flush Joint.
E-7 1/-6 X 1^'s "1
Shouldered on Top Bar, butt flush
on Seat Top Mast.
Each, 20c.
'BUSHINGS" FOR OUTSIDE
JOINT SEAT POST LUGS
Size. Doz. Each.
Xo. M-l ft x 1 /s 00 8
" M-2 ft x 1 5 4 OH s
Oval Head.
" 12 ft x 2 (in 6
Outside Ladies'
No.
E-l
4SOS
4810
Size
Each, l.V.
Fits 1/i" Tubing. Each, 5c.
13
REAR FORK ENDS
Flush Joint Pattern
No. G-3.
" 18 ga. xf" 20 ga.
With N.P. Screw Chain Adjuster.
Diagonal Slot.
Per pair 30c.
Flush Joint Pattern
No. G-4.
"18 ga. x I" 20 ga.
Parallel Slot.
This is adjustable to any height frame
from 21" to 26" inclusive.
Per pair 20c.
REAR STAY TIPS
Flush Joint (Offset)
No. 5110, for |" x 20 ga. Tube.
5111, for |" x 20 ga. Tube.
Per pair 10c.
Flush Joint (Central)
No. 5112, for |" x 20 ga. Tube.
5113, for |" x 20 ga. Tube.
Per pair 10c.
D Pattern
No. 53.
For D Tubes.
Per pair 20c.
D Brace Tips.
Per pair ..10c.
UNITE
Round, Oval or D Flush
Joint Pattern
No. 8634. f x ".
With N.P. Screw Chain
Adjuster.
Per pair 30c.
THIMBLES
Per 100.
00.
Perdoz.. ...30c.
No.
Style.
Width
Sire.
Gauge
No.
Style.
Width
Size.
Gauge
5001
Oval
3
If
2
4
20
5008
Plain
*
20
5002
D
20
5009
i<
1
20
5003
D
*
22
5010
(i
3.
22
5004
Shoulder
a
4
20
5011
it
i
20
5005
a
i
4
22
5012
tt
i
22
5006
tt
1
20
6013
Bug. B.
A
20
5007
1
22
5014
11
*
20
REINFORCEMENTS
No. 8387.
Round, for Flush Joint
Connections, l|."
Per doz. . ...32c.
No. 90.
Round, 3|"
long, | tolj"
Perdoz.,32c.
No. 91.
Forksides,
3*" long, 1".
Perdoz.,32c
Hardened Pressed Steel Bali Bearing Gups
FULL SIZE
No. 4
Number 1
Inside diameter... H
Inside depth
Each 12c.
HUB
Will fit 95 ou
lOc. lOc. lOc. 9c. 9c. 8c. 7c. 6c. 6c.
6c. 6c.
Round Head Machine Screws for
Name-plates, Mud and Chain
Guards, Etc.
Size
Thread 24, 20 or 28
Per doz $3.50
Each 0.30
24, 26 or 28
3.50
0.30
30
3.50
0.30
N. P.
WASHERS
Size
Per doz.
Per 100
i
lOc.
75c.
TIT
lOc.
75c.
lOc.
75c.
NUTS
Nickel-Plated, Hexagon Forged
No
,.2 to
Per DC
4 6
)Z.
H
10
12
14
Length,
i or 4
-...4c.
4c.
5c.
6c.
4 ..
...4c.
4c.
6c.
8c
lOc
n
*...
. 4c.
4c.
5r
7c.
9c.
lie.
H
...4c.
5c.
fir
8c.
lOc.
m
3
...5c.
6c.
7r
9c.
lie.
14c.
i <
7c.
8r
lOc.
12c.
15c.
ii
1
8c.
9c
lie.
14c.
IC.r
No
2
3 4
8
10 12
14
Size
A
7 7
9
1 1
3 7
i
Thread
Size Dril
11 .
56
49
48 36
45 42
32
35
32
30
24 24
25 17
20
6
Blank, per 103 Threaded, per doz.
i"
n //
57
n ;/
if"
32
24 to 32
24 to 32
20 to 32
20 to 32
20 to 32
20 to 32
$2 00
2 25
2 50
2 50
2 75
3 00
3 00
30c.
35c.
40c.
40c.
40c.
45c.
45c.
SQUARE TAPPED NUTS
For Machine Screws
No 2 3 4 6 8 10 12 14
Per doz... lOc. 7c. 7c. 7c. 7c. 8c. 9c. lOc.
1 and 1" Head or Bracket, Blade. ..80c.
L5
MACHINED STEEL FITTINGS
Xo. 40 Rear Sprocket, teeth milled, bored
1 ,",.," hole, not threaded.
7, S, <), and 10 teeth each, 20 t -.
1'2 teeth " 45c.
No. 60 Tempered, threaded and blued.
7 8 9 10 teeth.
50c. 60c. 70c. 80c. each.
Nu 4O
SPROCKETS-MILLED AND BORED,
17
is
No. 113.
" 107.
" 35.
No. 113.
" 107.
tiOc.
22
$1.2.-,
1.45
NO 10;
N. P. CRANKS
N. P. COTTER PINS
No 14O
Hardened Steel, with
Nuts and Washer-.
Per 100, $3.40; doz., 50c.
No. 35
No 40
Threaded ,'' x -Jo
$1.50 per pair.
No. 41
Slotted.
SOc. per pair.
No. 42 No 43
Threaded Threaded
2 x -JO Yt x2d
lie. per pair. (iOc. per pair.
STEEL DROP FORCINGS
THREE-ARM DETACHABLE SPROCKET WHEELS
REAR FORK ENDS
NO. <;o
Per Pair
No. 60. Rear Fork Ends for % in. Rear Fork 10c.
No. 61. " " % " 10c.
No. 62. " D pattern, same as No. 31. .20c.
No. 63. Rear Stay Ends, ^ or % in IQc.
No. 64. " " D pattern, same as No. 32. . lOc.
CRANKS
PLAIN SPROCKET WHEELS
SPIDERS
No. 21
16, 17, 18, 19, 20, 21, 22, 23, 24 teeth
N O. 21 35c., 38c., 40c., 43c., 45c., 50c., 60c., 75c. each
No. 22 35c., 38c., 40c., 43c., 45c., 50c., 60c., 75c. "
7, 8, 9, 10 teeth.
No. 24....8c., 10c., 10c., 12c. each.
Sheet Steel Hub Sprockets, 7, 8, 9 teeth each, lOc.
a
No. 2681. Ladies'
in.
Each, 18c.
SEAT POST LUGS
No. 2686. Gents'
Itf in., \Yi x 1 in., 1 x 1 in.
Each, 18c.
17
No. 3312 (with Two Arms)
6, Q)4, 7 inch, each, 25c.
Left hand to match, each, 12c.
No. 2163 (Round)
Williams' Round, 6, G%, 7 in., each, 12c.
No. 2850 (Flat)
Williams' Square, 6, 6^. 7 in., each, 15c.
ARCH CROWN
HEAD CLAMP
CC
No. 2844
]/% to \y% inch.
Each, 8c.
No. 3640
King- of Arch Crowns.
Each, 20c.
DOUBLE CROWN
ooo
No. 2796 No. 2797
Nos.-2797, 'JTUti, for 1 inch forkside, per pair, 20c
Nos. 2444, 244.-), for ?/ s " " " ..20c.
Race for i/% inch forkside, " . .20c.
FORKS AND STAYS
D STYLE
No. 74. Rear Forks, " Round, D Shaped Extension, Tapered
f" at Fork End Per pair
No. 75. Rear Stays, f" Round, D Shaped Extension, f" at Fork
End . Perpair
Solid Drawn Brazed
).70
$0.35
0.40
Solid Drawn Brazed
No. 76. Rear Forks, f" Round, D Shaped Extension, Tapered
|" D at Fork End Per pair $0.70 $0.35
No. 77. Rear Stays, f" Round, D Shaped Extension, f" D at
Fork End . , Perpair 0.80 040
OVAL
No. 78. Rear Forks, |" Round, Oval Extension, Tapered, f" Oval at
Fork End Per pair
No. 79. Rear Stays, f" Round, Oval Extension, f " Oval at Fork End "
No. 80. Rear Fork, as 78, Flattened at Fork End
No. 81. Rear Stay, as 79, Flattened at Fork End
No. 82. Rear Stay, f" Round, Oval Extension f" at Fork End, Bend as
in Model No. 51 Per pair
Solid
Drawn
70c.
80c.
70c-
80c.
80c.
FRONT FORKS
FAUBER'S PATENT REAR FORKS AND STAYS
No. 00. Rear Forks, Stem 1J", 16 Ga., Sides 18 Ga., Tapered to
f " Round Per set
No. 01. Rear Stays, Stem 1", 22 Ga., Sides 20 Ga., Tapered to
f" Round . ..Per set
Drawn Brazed
$2.00 $1.35
2.00 1.35
No. 8G. Solid Drawn, " Round, Cranked, Oval Per pair 70c.
No. 85. Solid Drawn, f" Round, Cranked, D Shaped Per pair 70c.
No. 81
v
Solid Drawn, %, % or
per pair 60*
Brazed, % or 1", pair 26
Our Weldless forks ai>
New Improved Patten
with swaged ends.
FORK END TIP
Per doz., 40c.
Each, .~>t.
is
WELDLESS STEEL TUBING
PRICE PER FOOT
-a
li
s
WO
f S
F
w
Equivalent in
Fraction of Inch
DIAMETER OF EXTERIOR IN INCHES
i
T 9 e
f
H
1
1 3
16
8
1 5
T3-
1
IrV
H
1 3
1 Tr,
H
If
H
26
.018
30
82
33
35
36
37
88
39
40
41
42
43
25
.020
80
32
83
85
36
37
38
39
40
41
42
43
24
.022
30
32
33
35
36
37
38
39
40
41
42
43
44
23
.025
80
82
33
35
36
37
88
39
40
41
42
43
44
22
.028
30
82
83
85
86
37
88
89
40
41
42
43
44
48
50
21
.032
30
32
38
85
36
37
88
39
40
41
42
48
44
48
50
20
.035
31
83
34
36
88
38
39
40
41
42
43
45
46
49
52
19
.042
31
38
35
37 i 38
39
40
41
42
44
45
47
48
52
55
18
.049
32
84
86
38 i 89
41
42
43
44
46
48
50
51
55
60
17
.058
33
35
37
39 41
43
44
46
47
49
51
53
55
60
65
16
.065
35
37
39
41
43
45
47
49
50
53
55
58
60
65
70
15
.072
87
39
41
48
45
47
49
52
54
57
59
62
64
70
75
14
.083
88
41
43
46
48
50
52
55
57
60
63
66
69
75
81
13
.095
40
43
45
48
50
53
55
59
62
65
68
I 72
75
81
88
12
.109
42
45
48
50
54
57
59
68
66
70 73
77
81
88
95
11
.120
45
48
51
54
57
60
63
67
70
74 78
83
87
94
102
10
.134
51
54
57
60
64
61
71
74
79 84
89
94
102
110
FIG 86. D PATTERN. 7-8 x 2O G.
HEAD STEMS
( Machined)
BENT BARS
1" x 16 W. G. 1-2"
over all.
Threaded 1" x 24
pitch.
Each, .Sllc.
No. 50. Single Curved. Each, OOc.
No. 51. Double Curved. Each, 60c.
(See Ladies' Frame, page (i).
SPRING SEAT
POST.
Each, $2. i MI.
No. 3 Expanding Seat Post.
Sizes, T V, 1, ||, i".
Each, 50c.
No. 4, | inside, 1 T ' (T outside for 1^ tubing.
No. 4 Expander. Each, 28c.
Othjer sizes to order.
19
HANDLE BARS
HEAVILY NICKEL-PLATED ON COPPER, WITH f-in. POSTS, NO GRIPS
Special Sizes of Posts to Order
FREDRICK ADJUSTABLE
Adjustable to Every Position. Construction of Clamp.
The side arms are supported both back and front. The corrugated ratchet plug works on the principle of a wedge, am
should the rider fail to properly tighten up the bolt after he has made an adjustment, the corrugated plug will prevent the
arms from falling down. This is not so in any other bar. The slits in the stem allow the head lugs to give a trifle, thus
bringing pressure against bolt head, which absolutely prevents the bolt working loose. The expander is invisible.
No. 85 Adjustable each, $2.10 No. 84 Adjustable, Expanding each, $2.20
THE CLAUS ADJUSTABLE.
No. 1
Width, 18"
Drop, 2"
Forward, 3"
No. 2
Width, 18"
Drop, 2"
Forward, 3 1
Adjustable, secure and simple ; will not work or wear
loose ; may be converted from a drop to an upturn.
Has a range of adjustment 15 inches.
No. 87 Adjustable each, $2.10
No. 86 Adjustable Expanding .. " 2.20
THE CLAUS
EXPANSION STEM.
THE CLAUS PLAIN STEW
EXPANSION STEM
No. 1,3 or 3
&ars with expand-
ing adjustable
stem.
Each, $2.20
PLAIN STEM
No. 1.2 or 3
Bars with adjusta-
ble stem.
Each, $1.90
No. 3
Width, Hi-
Drop, 3"
Forward, 2'/<"
Width, 18"
Drop, 4"
Forward, 2"
STEEL HANDLE-BARS
HEAVILY NICKEL-PLATED ON COPPER, WITH * in. POSTS, NO GRIPS
Special Sizes of Posts to Order
No. 7-A, Adjustable, 17 or 18".
Each, $1.85.
Io. A, Up-turn, Stationary, 17 or 18
Each, $0.85.
No. 7-B, Adjustable, 16".
Each, $1.85.
No. B, Down-turn, Stationary, 16"
Each, $1.05.
No. 88, Perfection, Adjustable, No. D, Down-turn, Stationary, 17".
Expanding. Each, $1.10. Each> $Q.85.
I
No. 7-D, Adjustable, 17 or 18"
Each, $1.85.
No. D, Up-turn, Stationary, 17 or 18"
Each, $0.85.
No. 87, Expanding Bolt and Clamp
Black for above Bar. Each, 30c.
No. 7-E, Adjustable, 18 .
Each, $1.85.
No. E, Down-turn, Stationary, 18"
Each, $0.85.
THE "BALDWIN" BRAKE
Can be attached to any Bicycle in Two Minutes
No. 89, Adjustable, Bent and Tapered, 1 to J/ 8 "
Each, $1.50.
!O
No 9O
No. 90, Wood Bar, with Adjustable N. P. Clip with Grips.
Each, $1.00.
No. 90^. Ditto, Mahogany Finish. Each, $1.00.
No. 91. Ditto, Adjustable, Ram's Horn. Each, $1.50.
PAT E NT
APPLIED FOR
No. 3
Complete. Each, $2.00.
21
GRIPS
LEATHER
LEATHER
No. 11. Nickel-Plated German Silver Tips.
3i or 3" long.
Per doz. pair, $4.50 ; per pair, 40c.
No. 7. Nickel-Plated German Silver Tips.
Per doz. pair, $4.80 ; per pair, 45c.
Made from selected grain leather, stitched on to wood grooved reinforcing, into which
groove seam in leather is sunk, making grip perfectly smooth.
CORKALINE
No. 12. Built-up leather, lined and reinforced, per
doz. pair, $2 40 ; per pair, 25c.
SOLID WRAPPED CORK
Selected Quality
No. 30. Nickel-Plated German Silver Tips.
Per doz. pair, $3.20 ; per pair, 30c.
HANDLE BAR BUFFERS
Rubber Buffers.
Per doz., $1.00; each, 12c.
Per doz. Per
Size, pair. pair.
No. 14. |" Square Nickeled Tips $1.80 15c.
28. 1" Square Ger. Silver Nickeled
Tips 2.00 20c.
25. f" Square Ger. Silver Nickeled
Tips, lined and reinforced... 2.00 20c.
26. |" Square Black Composition
Tips, lined and reinforced... 1.60 20c.
27. f" Square Inlaid Composition
Tips, lined and reinforced... 2.70 25c,
24. Square White Celluloid 1.20 12c.
23. Square Black Ebonite 1.20 12c.
BUCKSKIN
No. 17. |f or f" Square Nickel Tips $1.50 15c
I (J
THE PERFECTION GRIP
Stops all cramp and numbness of hands, wrist
and arms. Made of SPONGE rubber and unusualb
flexible, they conform to ANY curve of bar and fit AN"
size. Rubber covered " Reliefs " can be readily
forced over any rigid end grip already oi
with powered soapstone and so slid into posi
tion.
Plain Rubber per pair, 75c
Soft leather covered . " 90c
WOOD RIMS
BOWMANVILLE
Dominion Dunlop
Single Piece Crescent
Tandem
Crescent
Crescent, Deep Centre
G. & J.
Crescent Pattern Dunlop or G. & J. Pattern
per doz. per pair. per doz. per pair.
Bowmanville, 28-in ................... $12 00 $1 15 $13 60 $1 25
Boston Laminated, 28-in .......... 12 80 1 20 14 50 1 35
" Single-piece, 28-in .......... 800 80
Sulky, $2 00 per pair.
Tandem, 1 50
30-inch Rims, 15c. per pair extra on above prices. Other sizes, special prices on application.
We carry a Stock of SECONDS SUITABLE FOR REPAIR WORK. Price on application.
MUD AND CHAIN GUARDS (EYELETED)
Natural Finish, open, per pair 30c.
Mahogany Finish, open, per pair 30c.
Natural Finish, continuous, per pair 35c.
Birdseye Maple, continuous, per pair 60c.
Quarter-cut Oak continuous, per pair 65c.
23
CHAIN GUARDS
CHAIN GUARD
SPROCKET
SHIELD
No. 43
Aluminum, Polished Face, standard length for wheel
CHAIN GUARD
.Each $2 00
No. 42
Sheet Steel, Smooth Finish.
Can be used with 24 tooth and
Smaller Front Sprockets.
Ready for Enamelling. Ea. 25c.
SPROCKET GUARD
a
No. 44
Sheet Steel, Smooth Finish, for 24 tooth and Smaller Sprockets.
Ready for enamelling, Each, 50c.
STEEL BALLS
No. 41
Aluminum, Polished Face, can be used
with 24 tooth and Smaller Sprockets.
Each, 60
RIM COUNTERSINK AND DRILL
Made of the finest cast steel, best finish and most accurate ;
done up in 100 lots only ; less quantities at list price net.
4 A A A * A I inchdiam.
$0.15 0.18 0.20 80 0.30 0.88 0.65 per 100.
Prices on application for larger sizes and quantities.
Also for 2nds suitable for agricultural and machine work.
OILERS
No. 33
This will drill holes for any style wished,.
and is made of the highest grade steel.
Each, 80c.
No. 123 No. 3 No. 2 No 1
Spring Cap ,
25c. doz. 3^x40 1^x32 7T 7 ? X 28
50c. 50c. 60c.
No. 6 No. 8
-Shanks Threaded
/, X 28 i X 26
80c. 35c.
No 10
No.
40c.
40c.
60c.
NO.
Oil Hole Covers
assorted sizes
15c. doz.
24
LACING CORD
Voven Mohair in Hanks, 72 yards each, black,
yellow, ruby, brown, or mixed black and
yellow, black and ruby, ruby and yellow.
Per Hank 40c.
-ply Twisted Silk in Hanks, 18 yards each,
same colors... Per doz. hanks, $2 50 ; per hank, 25c.
-ply Twisted Silk in Hanks, 18 yards each,
same colors... 13 Ydfi7ni\3 t \V/ f f $1.50 ; per hank, I6c.
_nes.
iplete, 8 or 9 tl
Woven Mohair in Hanks, 18 yards each.
Boxes of 12 hanks, assorted colors.
No. 1
Detachable Lacing Clip allows
dress guard to be taken off with-
out removing axle nut.
D er doz. pair $2.25
>er pair . 0.25
Per box $1.50
Dress Guard with Hooks at top
to fit into eyelets of mud guard,
with detachable lacing clip
No. 1. Silk, all colors.
Per set ... 70c.
No. 3
Dress Guard with Hooks at top
to fit into eyelets of mud guard
with plain lacing clip. Mohair,
all colors.
Per set 45c..
No 4
Separate Lacing* Loops. Made from bright steel
stamping, nicely nickeled. Fits over a f" axle.
Per pair 6c .
Cut shows one complete set.
Chain Guard Braces. Bright steel, nicely nickeled.
No. 11 Per set, 25c.
No. 12 " 25c.
In set No. 11 the long brace is about 7%" long. In set No.
12 the long- brace is 8^" long. In both sets the short, or rear
brace is about 5%" long. Every set is wrapped in a separate
paper with screws and nuts in an envelope.
MUD GUARD BRACES
No 111
No. 112
Made from bright steel, all parts well nickeled. -,.
This brace has two loops, one to go over axle, Made from bright steel, all parts nickeled. The eyes
of this brace can be unscrewed from the wire.
Correct length for 28-inch wheels.
Each.. ...20c.
one for lacing cord, both loops in one piece. Cur
special design, and a favorite. Correct length for
28-inch wheels.
Each ...25c.
25
Excelsior Needle Company's Selling Agents
No. 183
Double Butted.
No. 135
Plain Even Gauge.
Per 1000
No. 132a. Excelsior, double butted, bent, headed, nickel-plated and threaded, with nickel-plated nipples
5p 1 o OU
" 132b. Best ExceSr o U rf Double '^butted,"bent, headed, nickel-plated and threaded, with nickel plated
' ' 1 32c. Best SSelsior, double butted, bent, beaded, double nickel-plated, 12-14, 13-15, 14-16 or 15-17 gauge. 12 00
" 135a. Bent, headed, nickel-plated and threaded, 14 gauge, with nickel-plated nipples 9 /U
" 135b. Bent, headed and nickel-plated, 13, 14, 15, 16, 17 gauge -
" 135c. Best Excelsior Sulky, bent, headed, nickel-plated and threaded, with extra heavy nickel-plated
C
NIPPLES
Per 100
$1 40
1 80
1 40
1 00
60
1 75
_
Per 1000
Threaded, Nos. 18 6ft ,14^, I5 r " ; ,
Hi-" 1 , 17", plated $3 20
Sulky, 12 gauge, heavy
Per 100
$0 40
70
smaller iron
Ready for Ename
Nos
, 131
' -~ I I f\
No. 139 No 130
Per 1000 Per 100 Per 1000 Per 100
40c. 10c. ' 40c. lOc.
APPLEBY'S "ROYAL TWIN" ROLLER CHAINS
TOP VIEW.
The side plates are prevented from catching upon the apex
of the tooth of the wheel, which occurs with the ordinary form
of Twin-Roller Chain when run too slack.
In addition to the above improvements the ofcains are fitted
throughout with our celebrated patent, immovable, pen-steel
bushes, which effectively prevent rotation of the rivets, thereby
reducing elongation to a minimum.
No. 200. Sizes, T % and % in., 57 in. long each, $2 25
INDIANAPOLIS CHAINS
No. 202. T \ in., with straw tempered B blocks, hard rivets, top polished blued B sides, 57 in. long each, $1 jgO
" 203. y " " " " "
" 204. T \ in., with straw tempered polished B blocks, hard rivets, all polished blued B sides, perforated and
champerd, 57 in. long r ' ' j ' ' j
" 212. T \ in., with straw tempered polished B blocks, hard rivets, all polished blued B sides, perforated am
champered. 57 in. long, silver steel
" 213. l / s in., with straw tempered polished B blocks, hard rivets, all polished blued B sides, perforated anc
champered, 57 in. long, silver steel /^*\'\'
No. 105. % in. with bright No. 8 blocks, bright
rivets and plain bright No. 8 sides,
">7 in. long each, 85c.
1 30
1 40
2 25
No. 8 Blocks.
$1.00
.20
No. B Blocks.
$1.00
.20
BALDWIN
No. 8 Sides.
40c.
lOc.
No. B Sides. Nos. 8 and B Rivets. Bolts and Nuts.
40c. 30c. $1.40
lOc. lOc. .25
Nuts.
71 c. per IOC
lOc. perdoz.
CHAIN-BOLT
Baldwin Chain-Bolt removes the only
point at which a screw driver is neces-
sary on a bicycle. It is easily turned
round with the finger, and is secured
by being snapped over the head of the
other rivet.
OUT
Per dozen
.60c.
Patented Link and Lock Bolt.
Per doz 75c.
Each 8c.
Screws for same and No. 202-204 Chains.
Per 100 75c.
Perdoz 20c.
26
HUBS
MORROW COASTER AND BRAKE
Outside View. Interior View.
This Coaster and Brake is inside Hub, machine can be run back or forward when rider is off wheel, only
light pressure is required to put on Brake, and no continuous strain after applied. Perfect control of
/heel at all times.
Hub complete, 8 or 9 tooth sprocket with set spokes ViiX'/t'/- '" ^ach $9.00
NEW DEPARTURE AUTOMATIC COASTER AND BRAKE
Outside View.
Interior View.
\Yith this Coaster and Brake the rider has Perfect control of the wheel at atl times Consequent
reedom from accidents One third less pedaling A tight pedal and a free wheel No strain on himself or
nachine when braking Sprocket, chain, and pedals at rest when coasting No danger of losing pedals
nstant response in time of need No trundling of wheel down any hill a horse can descend Feet on the
)flaals at all times No back-lash or lost motion.
ITS OPERATION
The driver E carries the cone D. When the rider pedals ahead, the rear sprocket G turns the driver E,
which, by means of a thread, forces the cone D into contact with the driving clutch F, which forms a part of
the hub, and the wheel rotates. The connection is instantaneous and positive. In coasting the rider simply
holds his feet still upon the pedals, and the cone D moves back along the driver to the center, when the
wheel revolves freely, the driving mechanism being released. A slight backward pressure drives the cone
into the braking clutch C, which is fastened to the frame by the arm shown in figure i, and the friction of
the cone in the clutch retards or stops the wheel as the rider desires, and with a very slight pressure.
Hub complete, all sizes of Sprocket, with set Spokes Each $9.00
SULKY HUB
No. 1OO3.
Made from solid bar, cups and cones turned from best cast steel, and accurately ground.
pattern. Flanges over Bearings. Per pair, $4.00.
27
Latest improved
HUBS
OEM
No. 099. "Gem," turned
from solid bar, cups and cones
dust proof and made from
special cone steel, fitted with
hall retainer, has a reservoir
of oil, in which the balls con-
stantly revolve, chain line
1" or If", sprockets 7 to 12
tooth for T V chain.
Per pair, S3.OO.
Balls Stay in When Axle is Removed
THOMPSON'S
No. L-6. " Thompson's " fitted with Ball Re-
tainers and Tubular Oiling Device. Thoroughly up-
to-date in every particular. Cups and cones carefully
and accurately ground. Shell turned from solid bar.
Best material. Handsomely plated. With 9 " balls.
Distance between Fork Ends, 4f" ; from centre of
hub to centre of sprocket, If". Fitted with 7, 8,
9 and 10 tooth sprockets, suitable for ^" chain.
Per pair, $2.00.
LEADER
No. 998. " Leader " made
from bar steel, cups and cones
turned from special cone steel,
accurately ground, chain line
1" or If", sprockets 7 to 12
tooth for -%" chain.
Per pair, $2.25.
Balls Stay in When
B.S.A
No. 99. " B.S.A." Standard Pattern, road
or race hubs, If" or \\" chain line for " chain.
Per pair, S4.OO.
No. 1OO. " B.S.A." Barrel Pattern, road
hubs, If" chain line for " chain.
Per pair, S6.OO.
'28
HUBS
U.S. SPECIAL
No. 996- " U.S. Standard " turned from bar,
cups and cones turned, hardened and ground, dust
proof bearings, finest grade nickel-plating, sprockets
7 to 12 tooth for -&" chain.
Per per, $2.20.
U.S. STANDARD
No. 991. " U.S. Special," steel shell, pressed cups,
cones turned, dust proof bearing, sprockets 7 to 12 tooth for T y
chain.
Per pair, SI. 75.
WORLD
No. 1003. " World," made from
solid bar. Good hub at low price.
Per pair, S2.0O.
EXCELSIOR
No. 1001. "Excelsior," made from
solid bar, cups and cones turned from
best cast steel and accurately ground,
chain line If", sprockets 7, 8, 9 or 10
tooth for T \" chain.
Per pair, $2.35.
BEATS ALL
No. 10OO. " Beats All," made from
solid bar, cups and cones turned from
best Cast Steel and accurately ground,
new device for oiling hubs at both ends,
chain line H" or If", sprockets 7, 8, 9 or
10 tooth for T y chain.
Per pair, $2.65.
AUTOMOBILE HUBS
Style No. 1-AUTO HUBS
^ -w J \/
Designed for Phaetons or Light Delivery Wagons
The Wire Auto Wheel has come to stay, owing to the many advantages offered. Our Auto Hub
are designed and have proven to be as easy running as any bicycle hub. The cups, cones, axles an>
shells are all turned from the best material obtainable. These hubs will carry a gross weight of 5,000 Ibi
with safety. The axles are If with 6-inch stub. Distance between flanges 4 inches for both front an
rear. Flanges drilled to suit requirements. We furnish hubs, less sprockets.
Can furnish sprockets extra if desired, cast of crucible steel.
Style No. 2-AUTO HUBS
For Light Automobiles and Runabouts
Steering device (patented) attached to front hubs. Rear hubs in either ball bearing or stationar
attached to axle. These hubs are somewhat smaller in diameter than our No. 1 Hub.
DESCRIPTION (a) Connecting link; (b) Boss to connect with the main or cross
rod; (c) Steering lever, in one piece with the body of the steering knuckle; (d) Dust shield
for the steering knuckle; Bearing in both front and rear hubs, f inch; Bearing in knuckle,
inch; Bearing in connecting link, ^ inch; Axles 1-inch, with 6-inch stub; Width C to C,
flanges 4 inches; Diameter of barrel, 2 inches; Diameter of flanges, 3f inches.
CARRIAGE HUBS
Same diameter shell as No. 2 Auto Hub, ball bearing, axles 1-inch, best material, strictly high grad>
Price on application.
30
BULLIS BALL GEAR
CANADIAN SELLING AGENTS
Gear complete with fittings as above, nickel-
plated hub, cranks, cups, cones, etc... $40. 00
Set of fitting to make complete frame with gear,
N.P. hubs and cranks... Per set $45.00
This gear resembles the bevel gear in appear-
ance, inasmuch as one of each intermeshing pair
of gears is supplied with a fixed involute tooth,
which differs largely from the bevel gear, from the
fact that it has been so designed as to secure a
rolling line of contact with the ball in the inter-
meshing gear its entire length. The teeth are
accurately generated and are theoretically correct,
being carefully hardened and ground. There is
absolutely no lost motion, no grinding or jumping
in operation. The machine's instant response to
all power applied is manifestly apparent. The
intermeshing gear is equipped with a series of balls
which have been substituted for the regular tooth,
mounted upon hardened and ground pins, and re-
volve upon their axes, which are properly supported
at both ends. We have designed a set of necessary
fittings to be used in connection with this gear,
which make it absolutely dust-proof. (See cut
as above). We have machines in use that have
been ridden thousands of miles and aside from the
bearing surfaces of the teeth being highly polished
show no signs of wear.
DIAMOND PEDALS
No. 220, Gents' Rat Trap. Per pair, $1.00
No. 221, Gents' Combination.
No. 222, Ladies'
Per pair, $1.30
1.30
No. 214, Gents' Race. Per pair, $1.80
No. 212, " Double Plate. 2.00
No. 210, Gents' Combination. Per pair, $2.00
No. 206, Ladies' " " 2.00
"'" -
No. 208, Gents' Rat Trap. Per pair, $1.80
No. 216, Gents' Combination.
No. 218, Ladies'
Per pair, $2.00
2.00
NIAGARA
1900
PATTERN
PEDALS
No. 223, Gents' Rat Trap. Per pair, $0.90
No. 224, " Combination. " 1.10
No. 225. Ladies' Combination. Per pair, $1.10
PEDALS
lueen Gents' Rat-trap, wide continuous Band
Frame, large Barrel, dust-proof Bearing
with 10 T 3 5 " Balls in each end, easily ad-
justed Per pair $1.60
)ueen Gents' Combination, with Inter-
changeable Rubber Per pair 1.85
King" Gents' Rat-trap, same construction
as Queen, only narrower Frame Band,
Smaller Barrel, and 15 ^" Balls... Per pair $1.50
King" Gents' Combination, with Interchange-
able Rubber >./TT7\ Per pair 1.75
Century Gents' Extra Heavy Side Plates,
ting Ladies' Combination, with Inter- Rat Trap Per pair $1.10
changeable Rubber .. .Per pair $1 75
Century Gents' Extra Heavy Side Plates,
Combination Per pair 1.35
Banner Gents' Rat-trap Per pair $1.10
Combination .. .^J.r'f 1.85
r : ^=^^a&agi=^. y f : *"i T= ^V i .. -.r- . ^- - ^r/' t^r-- a*/*T
Banner Ladies' Combination Per pair 1.35
No - 108 Crescent Gents' Rat-trap, End Bearing
B.S.A. Ladies' or Gents' Rubber ...Per pair $4.00 design, T V Balls Per pair $1.00
Pattern, Gents' Rat-trap " 1.00 With Universal Rubber.. " 1.35
33
PEDALS
U.S. PAT. FEB.7. 1899.
FOREIGN PATS. 1898.
OTHER PUTS. PENDING.
S and G Combined Pedal and Toe Clip.
Has full, flat bearing for the foot, the leather top can
be adjusted to fit any size shoe, the rear
projecting lip makes the pedal very
easy to catch.
Per pair $2.50
Clock Diagram, showing under swing, with
perfect ankle motion obtained by use
of Ramsey Swinging Pedals.
Whaley Adjustable Stirrup Pedal
Pedal and base of clip in one piece ; the leather top,
which is held in shape by metal spring on face
of clip, is adjustable to ' fit any size shoe ;
fitted with tripper, which enables pedal
to be caught instantly.
Per pair $2.50
MODEL E.
No. E Ramsey Swinging Pedal
Has a forward or under swing (as per motion above).
This is caused by the pivotal point being
above the tread. The ordinary pedal has
a backward or over swing. This is
caused by the pivotal point being
below the tread.
The " Professional" Pedal
Has toe clip attached, and is made so that only one
side is used, thereby giving an extra clearing
above the ground of nearly one inch more
than ordinary pedals.
Per pair $1.75
Per pair $4.50
Toe Clips for same, per pair 0.50
MODEL Ci
No. C Ramsey Swinging Pedal
Description as above, with round knurled bars.
Per pair $4.50
Toe Clips fur same, per pair .... 0.50
34
Jointed Attachment
for Cranks
EXACT SIZE
m 70
No. 1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Pedal Parts
Large cup each, !
Dust cap "
Small cup "
Centre washer, leather ...per doz.
Inside plate each,
Lock washer for cone .. per doz.
Cone each,
Rubbers per set,
Axle washers per doz.
Barrel and cross-bar each,
Axle .
Outside dust washers
Steel side plates...
Inside dust washers
Front Stretcher
Frames
Small bolts for rubber ...per doz.
Small bolt for nuts "
Large check nuts each,
No. B 28 L
12
18
8
24
7
44
14
30
20
42
40
9
7
9
17
48
14
10
9
No. 20. Interchangeable Rubber Combination,
to fit " King " and " Queen " pedals.
Sizes for ladies' and gents' pedals, per set. $0 25
No. 21. Universal Combination Rubbers.
Snaps on ; no bolts or screws ; will
fit almost any pedal.
Sizes for ladies' and gents' pedals, per set, $0 25
The best and most useful invention on bicycles ever
ade. Fits any bicycle. Weighs only 8 ounces. Far
itter than any swinging pedal. Much lighter. Do not
ok clumsy. Less cost. Strong, durable, well nickeled.
Price per pair, $1 20
No. 22. "India " Combination Rubbers,
8 pieces to set, with N.P. bolts.
Per set, $0.25.
35
AMERICAN SADDLES
J^Mi
No. 5
Wheeler Special
Gents' Roadster, Wood base,
Padded. Each, $2.00.
Gents', Wood base, Padded, best quality
Leather top and bottom. Coil Spring.
Each, $1.60.
No. 77
Hunt
Ladies', same material as No. 76.
Each, $1.60.
fojecting up makes the pedal \
easy to catch.
No. 86
Wheeler Extra
Gents', Wood base, Padded with
curled hair, best quality Leather top
and bottom, Coil Spring.
Each, $2.30.
With Spiral Spring, each, $2.50.
No. 46
Gents', Metal base, Padded, selected
Leather top and bottom. Coil Spring.
Each, $1.20.
No. 41
Ladies', same material as No. 46.
Each, $1.20.
No. 108
Gents', Metal base, Padded, good Leather
top and bottom. Truss Spring.
Each, $1.00.
No 107
Ladies', same material as No. 108.
Each, $1.00.
No. 87
Wheeler Extra
Ladies', Wood base, Padded with
curled hair, best quality leather top
and bottom, Spiral Spring.
Each, $2.')0.
No. <K
Gents', Metal base, Padded, Truss Spring
Each, 80c.
No. O7
Ladies', same material as No. 98.
Each, 80c.
3tt
BROOKS' SADDLES
No B 10 L No B IT No B 24 L
Ladies' each, $2.80 Track Racing each, $2.40 Ladies' each, $2.40
No. B 10 X^jp/ No. B 38 No. B 28 L i
Road Racing each, $2.80 Gents' Roadster each, $3.25 Ladies' each, $3.25
No B 11
Track Racing each, $2.80 Hammock Roadster, each, $4.25
No. B 93
Ladies' or Gents, patent double
action spring, each, $4.00
No. B 24-1
Light Roadster... each, $2.40
No. B !>O
No. B 3O2 L
Hammock Roadster each, $5.00 Ladies', with 3 coil springs,
each, $2.80
sfTO
No. B 4O
Each $5.00
No. B 45
Each
. $5.00
Nos. B 40 and B 45 are broad saddles with patent tensioned leather under-seat by which the body is
supported and the peak left soft and unrestrained.
Springs for Brooks' Saddles, each, $1.00; Spiral Springs for Brooks' Saddles, each, 40c.
SADDLE CLAMPS
No. 9
Saddle Frame Clamp
Each, 50c.
No. 6
For | Flat Spring and Seat
Post.
Per doz $1.65
Each .. .20
No. 5
For Upright T or L Posts,
all wire springs.
Per doz., $4.00; Each, 40c.
No. 7
Per doz
Each ..
.50
.25
No. 1
Per doz $1.60
Each . .20
TOOL BAGS
No. 3
Per doz.
Each .
.35
.15
No. 572 No. 672
No. 572, size 1. Gents', square top, bevel riveted end, with patented clasp, per dozen $4.00
" 572, " 2. " " " " sewed " round bottom, with patented clasp, per doz... 6.00
" 672, " 4. Ladies' Triangular, sewed, with patented clasp, per doz 4.50
" 672, " 6. " " " " " " " extra quality, per doz 6.25
REPAIR KITS
No. 218
Dunlop Repair Kit.
Per doz., $1.35.
No. 217
Midget. Per doz.,- $1.35.
No. !<>
Morgan & Wright
single or double tube
tire, quick repair outfit
Each, lOc.
PARCEL AND BUNDLE CARRIERS
PARCEL CARRIERS
SCHOOL BAG CARRIER
The elastic band forms
a retracting spring- and
closes the mouth of the
carrier, firmly gripping
any article extending
above, and adjusts itself
to the numerous packages
you can put in it. This
carrier is made of black
cotton netting.
No. l,per doz $6.00
" each 60
POCKET CARRIERS
No. 3 clamps around the
handle bars and holds the
strap in place. Can be
used on almost any part of
bicycle. Springs are ad-
justable.
No. 3, per doz, pair, $3.60
" per pair 35
ELASTIC CARRIERS
This carrier is supplied with our spring clamp, same as
on our No. 3 Carrier. The clamps prevent the bag from
sliding together at the top, or slipping from side to- side on
bar. Leather straps with nickel-plated trimmings.
Per doz. Each.
No. 5. heavy colored duck, size, 9x10x3 in .... $5.00 50c.
" 6, " " " 10x10x3 in .5.00 50c.
REAR LUGGAGE CARRIER
No. 162, per doz. pair, $1.25 ; per pair, 15c.
Folding Wire Parcel Carrier
This carrier adjusts itself and will fit in rear forks of all
bicycles. It is supplied with fyoper length straps and nickeled
buckle. Just the carrier for cameras or any package or coat.
No. 7, heavily nickel-plated, per doz., $4.00; each, 40c.
Kozy" Child's Seat
Canvas Waterproof
Luggage Bag
No. 161, Size, 6x6x10". . . .each, $1.33 No. 159, Size, 8 x 10". each, $3.00
" 160, " 6x8x14".... " 1.65 " 158, " 10x14".. " obi 4.00
No. 163.
Each, $'2.'2o
39
No. 391
Aluminum Bronze, extra strong spring
shackle, self-lockling, 1 key, nickel-
plated steel chain, solid steel
ring.
Per doz $2.25
No. 1000
Bronze Metal, 200 changes, self-locking,
one key.
Per doz $3.80
LOCKS
No 205
Bronze Metal, self-locking, one key,
nickel-plated chain.
Per doz.. ..$2.90
No. 2O6
Security Lock, brass, nickel-plated,
key fastens in lock when
not in use.
Per doz .
.$3.20
No 8013 B
Yale, Bronze Metal, self-locking, two
keys, all different, brass chain.
Per doz.. ..$16.00
SCHUYLER5
SECURITY
CYCLE CHECK
No 1OO
Yale Steel, self-locking, one key.
No. 100. Ivory Black Finish.
Per doz $1.75
No. 105. Nickel-Plated Finish.
Per doz $2.50
No. 104. Same as No. 100, with
chain.
Per doz $3.20
No. 106. Same as No. 105, with
chain.
Per doz $4.00
NO. 1:55
Pressed Metal, brass interior works,
self-locking, one key.
Per doz $l.in
No. 1300
Bronze Metal, twelve changes, self-
locking, one key.
Per doz.
.$2.90
No. 1O
Yale Steel, self-locking,"two keys.
No. 102. Ivory Black Finish.
Per doz $2.60
No. 103. Bronze Finish.
Per doz. . . . $2.60
40
LOCKS
No 12OO
Bronze metal, plated, 200
changes, self-locking,
one key.
. Per dozen, $4.00
No. 37
Aluminum, spring shackle,
self-locking, flat key, all
different, weight f- oz.
Per doz., $8.00
No. 14OO
Acme Crank Lock, bronze
metal, self-locking,
one key.
Per dozen, $2.80
CYCLIST'S KNIFE
No 95800
Aluminum handle, large spear blade, turn screw and tire detacher.
Per doz., $10.00 ; Each, $1.00
MUD GUARDS
No. 187
Each, $1.00
MUD GUARDS
No. 183
Rubber band mud guard
for front and rear
wheel.
Per pair, $0.50
No. 184
Ladies' Gem Strip
Each, $0.40
41
PUMPS
No. 255
22" long, \y z " diameter, Brass
N.P. cylinder, cast stirrup.
Each, $2.10.
No. 25O
20" long, 2" diameter, Brass
N.P. cylinder, cast stirrup.
Each, $4.40.
No. 249
12" long:, IX" diameter, Brass
N.P. cylinder, wroug-ht
stirrup.
Per doz., $5.20; each, 45c.
No. 265
12" long, IX" diameter, Brass
N.P. cylinder, cast base, pat-
ented expander plunger.
Per doz., $6.40; each, 55c.
THE
BANNER PUMP.
Patented Jan. 10, 1899.
No. 256
12" long, l>2"diameter, drawn
steel, N.P. cylinder, cast base
Per doz., $8.40; each, 75c.
12" long, 1^" diameter, Brass
N.P. cylinder, cast base.
Each, 90c.
No. 264
Per doz., 76c.; each, 8c.
No. 264
12" long, IX" diameter, N.P.
Brass cylinder, cast base.
Place spout over valve, press down
with foot and connection is made.
Each, 60c.
AS A FOOT PUMP
No. 266
Giant Folding Pocket,
or Hand Pump.
Each, 65c.
Foot
264
Right Angle Pump
Connection.
Per doz., 90c.; ea., lOc.
263
Swivel Nipple A and K
combined.
Per doz., 60c.; ea., 8c.
No 26O
A Swivel.
Per doz., 60c.; ea., lOc.
42
No. 259
K Nipple
Per doz., 30c.; ea., oc.
No. 262
Hand Pump Nipples.
Per doz., 30c.; ea., 5c.
PUMPS
No. o
Cylinder.
Capacity.
17 cubic in... each, $2.40
25 " " 4.20
Cylinder. Capacity.
No. 56 6^x3 in. 38 cubic in.
Each $7.00
No. 258.
Hand Pump.
Per doz $1.65
Each .. .0.16
Pump Suckers.
Hand pumps, per doz . . 12c.
Rubber Pump Tubing. Foot pumps. 1# 1)4 2" Steel Pump Clips.
Per foot 8c. Per doz. . . 30c. 35c. $1.00 Per pair lOc
Automatic Cut-off Valve.
Each, 60c.
CHAIN CLEANING BRUSHES
nOMTO U
No. 140. Single row per doz., $1.35
" 141. Double row.. " 2.50
BICYCLE CHAfN BRUSW
- FURt BRISTLES ONLY
, WlACLUIIBOTHSlOlSOf CHAIN AT 0*t
OfMATlON. CAHBEWASntDIMHOTOR
COLDVIATER. ,
No. 142. Per doz., $2.00; each, 20c.
TIRE CLEANING
BRUSHES
No. 143. Per doz., $3.00; each, 30c.
iflNBlSWrBlCYClETlREBRU?*
WILL CLEAN AND POLISH TIREANO
RIM AT THE SAME TIME WITHOUT
tROUBLEORSOILINCTHE HANDS.
xFtTSANY SIZE.
MADE OF RUSSIAN BRISTUS
AND CAN BE WASHED OUTIN
HOTOR COLD WATER AND
ARE GUARANTEED IN EVER*
OTHER r."pLCT.
No. 144. Per doz., $4.00; <$ich 40c.
43
WRENCHES
No. 194.
" 491.
Per Doz. Each.
4^-inch, B. and S. Drop Forged, black ............... ...................................... $10.10 $1.00
4i " nickel-plated .................................... 11.25 1.15
WIS
No. 195-
" I9
" 591.
Per Doz. Each.
5-inch, B. and S. Drop Forged, black ................................................... $10.10 $1.00
6 " .................................................... 13 . 50 i'. 35
5 " nickel-plated ......................................... 11.25 1.15
6 16.80 1.65
Per Doz. Each.
No. 191. 5-inch, B. and S. Drop Forged, black $10.10 $1.00
5 " " V* " nickel-plated 11.25 1.15
JONES' PATENT
F REVERSIBLE SG
SCREW DRIVER
No. 1. Length, closed, 11-inch; open, 17-inch, with three forged steel bits each, $2.
^- " 10 " " 15 " " two olain bits and onft slnrrpH hif
two plain bits and one slotted bit.
The No. 2 is suitable for use on the Spoke Nipples of bicycles.
60
2.30
44
WRENCHES
Mo. 390. Nickel-plated (special pattern), all Wrought Steel Per doz., $2.40; each, 25c.
Drop Forged -from a high grade of Steel, carefully tempered and highly finished.
No. 191. Polished, Forged Steel Per doz., $2.30; each, 25c.
. Nickel-plated, Forged Steel " 2.75; " 30c.
No. 193. Nickel-plated, Fluted Per doz., $3.20; each, 35c.
No. 301. Mossberg C, Nickel-plated Per doz., $3.50; each, 85c.
No. 199. Mossberg D, Nickel-plated Per doz., $3.50; each, 35c.
4.-,
Spoke Grips
Nipple Grips
Double ..each, 80c.
No. 200
Combination Spoke and Nipple Grip,
blued. ..per doz., $3.50 ; each, 35c.
No. 204
" Perfect," blued each, 70c.
The "Gem"
Pinhole Spanner
No. 203 No .
"Pony," N.P., per doz., 75c.; ea., lOc. Plated. .....each, 15c.
No 201
Blued each, 35c.
Combination Grip,
Wrench,
and Screw Driver
Screw Driver
c
No. 3
Standard, Mahogany handle, 2" blade per doz., $1.00
Nipple Screw Driver
ON
5" over all.
No. 200
. ..per doz., $2.50; each, 25c.
Plated, per doz., $1.80; ea., 20c.
Wheel Truing
Stand
Just what you need to repair
and true up bicycle
wheels.
Each, $6.75.
46
TROL
CORRUGATED
PLAIN
NEW DEPARTURE
CYCLE GUARD
o. 228. Japanned per gross, $2.60; per
doz.,25c. No. 22<
No. 229. Japanned per gross, $2.60; per doz., 2.H-.
CLIP OPEN
lo. 230. Soliel, or French Clip, blued P er &">**> $6.50; per doz., $0.70
" 8.00; " 0.90
231.
nickel-plated
CYCLOMETERS
The "Jockey"
Geared throughout. Action
positive. No springs nor eccen-
tric parts. The registering is
absolute. It cannot be re-set.
What is the good of a cyclo-
meter whose mileage can be
changed at will ? You want one
whose record you can bank on.
Made and warranted by the
New England Watch Co.
No. 167, each $0.80
Per doz. . . . 8.50
U. S. Trip
Registers 100 miles by tenths, and can easily be set to
'0" at any time to record any journey.
The total registers up to
lO,000 miles, and keeps a per-
ect record of the season's
nileage.
The new spoke stud will
lot move on the spoke, but
>vill always remain in its place.
OUR GUARANTEE. Should
;he meter be damaged send to
naker, with stamps, and he will
-eturn it in good order.
THE U.S. MFG. CO.,
READS-
TOTAL 2486 MILES.
TRIP 75% MILES.
Trip Feature, with Improved
Set- Back.
EXACT SIZE
The New Departure
Non-corrosive, dust-proof, water-proof,
simple, strong mechanism, giving direct
and positive motion ; without springs,
ratchets, pawls or other cumbersome and
intricate parts, thus forming the smallest,
lightest, and at the same time the most
durable Cyclometer in existence. No soft
metals employed in its construction, every
part being made either from hard brass or
best nickel silver, which insures durability
with lightness. Records 10,000 miles and
repeats. Guaranteed by the New Depar-
ture Bell Company.
No. 166, each, 80c.; per doz., $9.00
No. 169, each $1.00
U.S. Odometer
for Carriages
Registers 10,000 miles by
tenths. The U.S. Odometer
registers the distance traveled
by a horse. Everyone who
has a horse and carriage will
be interested in this instru-
ment. Liverymen, physicians,
"speeders," etc., will find the
"U.S." of great practical
value. No one can guess with
accuracy how far a horse has
traveled. The " U.S." does no
guessing. It tells the truth. In
ordering state size of wheel.
No. 170, each, $2.50
As it looks when Attached
47
Perfect. Corrugated.
Per doz $0.70
Each 0.10
No.
Zenith. With stand, plated.
Per doz ........................ $1.10
Each ......................... . 0.10
No.
Star. Plated.
Per doz
Each .
$0.70
0.10
O,
No. 219
Standard. Plated, small
No -**
y> plated' 10 P ' orla ^. Magic. Plated.
Per doz ......................... $2.00 Per doz ........................... $2.40 Per doz ......................... $1.00
Each ........................... 0.20 Each ........................... 0.25 Each ............................ 0.10
48
jGRAPHITE
CYCLE
LUBRICANT;
No. ?>
Per gross, $10.00
" doz. . 1.00
VVILl NOT SOU THE HAKD><S* CLOTHES
KEEPS THE CHAIN eRICKTASWtll AS LUBRICATED
Per gross, $5.00
" doz.. I ..">< l
No.
Per gross, $10.00
" doz . 1.00
No.
Per gross, $4.00
" doz.. 0.40
.
IIJBRIGANT FOR
BicycLE CHAINS
BRIGHT AS WELL AS
IUBRICATED
No. 5
Brush and Graphite each, 20c.
Brush and Repair Kit " 30c.
No. 254
Per gross, $9.00
" doz.. 0.80
ECLIPSE CHAIN LUBRICANT
No. 160. Graphite, 2-oz. sticks in
tin foil.
Per gross, $2.75 ; per doz., % 2.">c.
No. 161. Glase Mica, 2-oz. sticks
in tin foil.
Per gross, $3.20; per doz., 35c.
NO- :s
3-oz. boules.
Per do/. $2.4ii
" bottle. . . 0.25
No
Gross lots only
Per doz
" gallon
.$4. SO
0.45
. 1.00
REDUCED CUT
No 4
Per doz $2.2o
Each .. . 0.25
Metal Polish.
Per doz., 50c.; each, .V.
Nipi
Electric Stroke
Per Doz.
Electric Stroke
No. E9^. 1^'Gong
E iy 2 . >-
Electric Stroke
.$5.00
GOO Per Doz.
lo.oii No. E 3#. 2^" Gong $12.00
No. E 6X- 2^" Gong
Per Doz
..$9.50
Electric Stroke
Per Doz.
No. E 9. 1 }/" Gong $5.<>0
" E 7. 2" " B."<>
Double Stroke
" D 8. 1^" Gong 4 70
" D 6. 2" " ">.H">
Double Stroke
Per Doz.
No. D 8>. l%" Gong $4.25
Fleur De Lis
Per Doz.
No. 1126. Electric Stroke, 2"
Gong $ s.oo
" 1125. Push button, contin-
uous ring 2" Gon'g 15.00
CONTINUOUS RING
Push Button
Per Doz.
No. 415. 2" Gong $1 1.00
" 413. 2" " 11.00
Push Button
Per Doz.
No. 425. 2" Gong $12.00
" 423. -J' 4 ' ' "
Push Button
(Rotary Movement Non-Revolving Gong)
Per Doz.
No. 150. Screw Clamp, 1^"
Gong JKI.SO
" 152. Band Clamp, 1^"
C'.ong H.50
50
Electric Stroke
Per Doz.
No. 211. If" Gong $2.40
" 212. 2" " 8.00
Double Stroke
" 111. If" Gong 2.50
112. 2" " 2.70
Electric Stroke Electric Stroke
Per Doz. Per Doz -
No. 311. \\" Gong $3.00 No. 311 B. If" Gong $3.20>
312. 24" " 3.60 " 312 B. 24." " 3.80.
Electric Stroke
Per Doz.
No. 321. If" Gong $3.50
" 322. 24" " 4.00
Electric Stroke
Per Doz.
No. 321 B. If" Gong $3.70
" 322 B. 24" " 4.20
'At
Single Stroke
No. S 4
Per Doz,
$1.60
This bell is entirely new in principle
and design and has less number of
parts than any chime bell made.
Action is reversible for either right
or left hand.
Each stroke produces two clear and
distinct tones.
No. 10. Double stroke, 24;
Gong $6.50
" 12. Electric stroke 2V'
Gong 11.50
Single Stroke
Per Doz.
Per DOZ. No. 14*. 2V' and 2f" Gong $1.20
Tire Bell, Continuous Ring
er Doz
No. T 9. 2" Double Gong
with spring push $6.00
51
DECORATED
Electric Stroke
No. 223. 2" Gong.
Per doz. .
Continuous Ring
No.
Continuous Ring
514. 2" Gong. No. 524. 2" Gong.
0.00. Per doz $12.50. Per doz $13.00.
AUTOMOBILE BELLS
TIRE WHISTLE
Rotary
No. F-63. 3" Bell Metal Gong,
nickel trimmings, enameled
case.
Each $3.75.
Double Stroke Chime
No. F-95. S" Bell Metal Double
Gong of different tone, all
nickel plated.
Each f $9.00.
I
WHISTLES
Cycle Whistle
No. 228. Double action, whist-
ling at each end. Can be attached
to any bicycle. 1 J" diameter, 2"
long. Each $1 33.
MOSSBERG g WRENCH CO.
ATT LEBOROMMASS. U.S.A.
"THEIDEVELiNE"
No. 225. Echo Call.
Per doz., $2.20.
No. 216. ThelDeveline^ Whistle,
Per doz., $1.50.
No. 227. Universal Whistle.
Per doz , $2.40.
52
TOE CLIPS
THE WHALEY
ADJUSTABLE BICYCLE STIRRUP
WIS
No. 417. Is adjustable to all sizes of shoes
without losing shape or strength. Will not mar
the shoe or bruise the foot. Made of water-proof
strap leather, Russet finish. The metal parts are
spring steel polished nickel-plated finish.
Per doz. pairs, $4.80. Per pair, 50c.
r^T. FEB.7.1899. FOREIGN PATS. I89B
OTHER PATS. PENDING.
THE S. & G. ADJUSTABLE TOE CLIP
No. 406. The S. & G. Adjustable has a one-
piece cover, and can be quickly changed to fit a
large or small foot. The cover spring is the
strongest form that can be made, and will stand
without injury any ordinary usage. Will not
injure the finest shoes.
Per doz. pairs, $4.80. Per pair, 45c.
PATNT APPLIED FOR.
HANDY FOOT GUIDE OR CLIP TRIPPER
Makes it doubly easy to insert the feet into any
toe clip. Made of spring steel, nickel-plated.
Per doz. pairs, $1.65. Per pair, loc.
UNITY
No. 419. Nickel-plated, polished, hardened steel,
round edge. Attaches to centre-bar of pedal.
Per doz. pairs, $2.00. Per pair, 25c.
No.J 410. Nickel-plated, polished, two bolts.
Per doz. pairs, 80c. Per pair, lOc.
No. 413. Nickel-plated, polished.
Per doz. pairs, $1.50. Per pair, 15c.
TOE CLIPS
Holdfast
No. 411. N. P. Polished Hardened Spring Steel.
Per doz. pair $1.30
Per pair ]5
No. 412.
TED
John Bull
N. P. Hardened Steel, Round Edge,
two bolts.
Per doz. pair $1.90
Per pair 25
"E" Klips
No. 408. N. P. Polished, Smooth Edge, adjust-
able in width to fit any shoe, will not mar
shoe. Extension over pedal plate
keeps clip from turning sideways.
Per doz. pair $3.00
Per pair 30
Scorcher
No. 415. N. P. Polished, Hardened Steel, Round
Edge. . Fits any shoe.
Per doz. pair $1.75
Per pair 20
^ 'ONTO
Pacer
No. 418. N. P. Polished, Hardened Steel,
piece curved to conform with shape
of shoe.
Per doz. pair $2.00
Per pair 25
Kumfurt
Top NO. 404. Same as " Pacer," with two bolts.
Per doz. pairs $2.50
Per pair 80
r>4
TOE CLIPS
Design Registered
Adjustable Wire Basket Clip
This Clip presents a flat surface for the foot, and
bolted on the inside of the pedal, does not roll.
No. 20i. N. P., per doz. pair, $1.80; per pair, 20c.
No. 407. N. P., Polished Hardened Steel, with
wire side guard.
Per doz. pair $1.86
Per pair .20
Single Bolt
No. 205. N. P., Wire Clip, per dozen pair, $1.00;
per pair, ] 2c.
No. 416. N. P., Polished, per dozen pair, $2.80;
per pair, 30c.
'ONTO.
No. 414. N. P., Polished, 2| or 3" wide, per doz
pair, $2.50 ; per pair, 25c.
No. 409, A, for ladies, 2",
B, small men's, 3",
C, medium men's, 3
D, large men's, 3".
Per doz. pair .......................
Per pair
.40
25
I
ACETYLENE GAS LAMPS
NO SMOKE, GREASE OR ODOR
No. 11
"M. & W. IMPROVED" GAS LAMP
IMPROVED AND BROUGHT UP-TO-DATE. New in every-
thing but design. And with our new " Duplex Bracket" it
has few equals as a medium priced lamp.
Price, each, $3.00.
No. 7
M. & W. "LOCOMO" GAS LA VIP
FOR CARRIAGES AND MOTOR VEHICLES. Built
like our famous " Duplex," but of larger capacity,
with half-foot burner. It works precisely the same
as the " Duplex," and is the most satisfactory gas-
lamp for vehicles ever introduced.
Price, each, $10.00.
No. 8
"DAYLIGHT"
Has rocker bottom carbide holder which makes
it easy to remove same. Perfectly focused lens and
reflector. Use loose carbide.
Price, each, $3.50.
M. & W. "DUPLEX" GAS LAMP
IT'S DIFFERENT New and Novel. Made on
gas lines. Candle power, 175. Turns up or down,
on or off. Automatic and mechanical. A cool lamp
but a hot seller, in fact the very best gas lamp on the
market at any price.
Price, each, $3.75.
56
ACETYLENE GAS LAMPS
NEW
Each
No. 10
DEPARTURE
No. 9
NEW DEPARTURE TWIN HEAD LIGHT
Has two burners, giving the most powerful light obtainable
by any means. Each lamp is adjustable independently, so
that any area or angle of light may be obtained.
Each.. ....$5.40
.$3.60
New Departure Lamps have automatic generator feed. Use loose carbide. No
special form of charge required. Flame may be regulated while riding. Lamp
mav be adjusted to throw light at any desired angle. Lamp and generator sepa-
rate, thus making a small lamp and insuring against explosions. Lamp J
full nickel plate.
No. 6
BRECKENRIDGE
(New Model)
Special design. Non-carbonizing burner.
Use loose carbide. Water, which is supplied
at bottom of lamp, causes gas to ascend
through the dry carbide, thus taking all
moisture from gas. Has 2J^-inch double
convex lens, perfectly focused.
Each.. $3.50
No. 5
M.&W - RAINBOW
Without exception the best low-
priced gas lamp. It is our leader.
Turn valve on full, the lamp runs
itself enough said.
Retail price, each .... $1.60
CARBIDE
IN SEALED TINS
A Ib. tins each, 20c.
" " 30c.
Price on application for cases of
2 dozen tins or bulk.
No. 12. Acetylene Lamp.
THE SCHUMACHER
Is loaded with a cartridge like a
breech-loading gun. Every cartridge
guaranteed to burn with a clear, even
flame. Safest, cleanest and quickest
lamp to operate on the market. A
combination of simplicity and perfect
action.
No. 12. Lamps, with 3 cartridges.
Each $1.50
No. 14. Cartridges for No. 12 Lamp.
Per doz 75c.
.-.7
OIL LAMPS
THE M. & W.
All Brass.
Nickel Finish.
No. Soldering.
Burns Kerosene.
Combination Bracket.
Can be used with
outside brake.
Adjustable to any posi-
tion by one screw.
Oil pot cannot be lost.
Will not go out.
No. 1T8
The M. & W. Patent Reflector is the only reflector
which can be removed complete, for cleaning or polish-
ing, through the lens opening. Simple construction,
air-tight and secure. No springs or wires. The double
convex lens is large and powerful, throwing a white,
bright, steady light over 100 feet.
5.25
No. 180
Has 2" Double Convex Lens, Plated Cone
Front and Reflector, Detachable Oil Reservoir,
Nickel-plated Wind-up Burner, etc.
Japanned, each $1.00
THE I. C.
LIGHT WEIGHT
ELECTRIC,
YCLKARM
LANTERN OIL.
MADE EXPRESSLY FOR
CCLESCARRIAGELAMP
No. ITT
Spring Back, Improved Design, Side
Lights, Burns Kerosene Oil
only, Nickel-plated.
Each $1.20
Standard Lamp Oil.
Per doz $1.70
No. 1TJ>
(One-Half Actual Size).
All Brass, Nickel-plated, no Solder-
ing, all parts riveted, won't blow
or jar out.
Each... . $1.00
LAMP BRACKETS
No. 179
Standard
Bracket for Head, lined and N.P.
Per doz., $1.35 ; each, 15c.
No. 177
Nickel-plated sheet steel Bracket
for Axle,
Per doz., 40c.; each, 5c.
No. 185 No - ?<>
Brake Bracket Head Lamp Bracket and Bolt
For Head, lined and N. P. N.P.
Per doz., $1.50 ; each, 20c. Per doz., $1.00; each, lOc.
^/y
No. 178
Fork Bracket
Reversible. Fits any Fork, N.P.
Per doz., $1.80; each, 20c.
No. 180
U. S. Detachable Bracket, for
Axle, N. P,
Ver doz., $1.00; each, lOc.
COASTERS
No. 318
Folding Coaster, N. P., per doz. pair, $8.00
per pair, 25c.
No. 319
Hercules Coaster, N.P., per doz. pair, $1.80
per pair, 20c.
59
BICYCLE STANDS
MYERS'-THE ONLY PRACTICAL EXHIBITION STANDS ON THE MARKET. ALLOWS THE PURCHASER TO MOUNT THE WHEEL
"PERFECT-
BICYCLE STAND.
No. 703 No. 697
Home Trainers, complete, each, $1.70 Stands each, 85c.
Wheel Truing Attachment for Myers' Stands, each, 60c.
No. 761
Perfect Stand Per pair, $3.40
Full size Cut of Key.
No. 74O
One-half size Cut of Bicycle Locking Stand.
IDEAL WALL STAND Patented
Adjusts at any angle by using thumb sc
Each, 25c.
Gem Top, Plain.
Gem Top, with Brace.
Gem Bottom.
Covered with rubber. Covered with leather.
FLOOR.
Per Doz. Each.
GEM Tops, plain $1.00 $0.13
" with Brace 1.33 .16
" Wire bottom, per doz., 33c.; each, 6c.
60
Per Doz.
$1.20
1.46
Each.
$0.13
.16
No. 274
Simplex Stand.
Screws on wall.
Drops down when
not in use.
Each . . . 20c.
RUBBER SOL TIRES
RUBBER PATCHING SOLUTION
MITE
HEAVY CANVAS SOLUTION
1
BE8 v
' 4x34f
35c.
2
3 4
TINS
5
i
doz.
h
' 20c. 2
X pt.
12c.
*4 pt. pint.
20c. 35c.
qrt.
tide.
No.
Each
10
pint.
25c.
11
P int -
40c.
12
pint.
70c.
13
quart.
$1.00
NOTE Our Solution is done up in IMPERIAL MEASURE TINS
WOOD RIM CEMENT (for Cementing- Tires to Rims)
:r doz .
ich ..
14
Bottles with
Swab.
$1.00
.10
20 21
TUBES
:^xX" 4x3^"
0.30 it.. in
.n.l .n.l
2:2 23 24 25 28
United States Wine Measure TINS ,
quart. gal.
^ pint. l /z pint. pint.
1.00 1.80 3.00
.10 .18 .30
.60
2.00
NOTE Our Wood Rim Cement is American make and is done up in Tins of U.S. Standard Wine Measure
PURE GUM SHEET RUBBER
JIFIOD PLUGGING CEMENT
o
ubes .
2r doz.
$0.60
4 x %
1.00
er doz $1.3-1
ach . . .1.1
1st Grade Per Ib., $3.00
2nd " 2.20
2nd " Squares, 4x4" Per doz., .50
EMERGENCY BANDS
HARD TIRE CEMENT
BEST RED
1 Ib. packages per Ib., $0.4( .Made of good quality rubber. Can be
No. 0, Telescope boxes, per doz. 1.3-1 placed around tires and rim, secure y
binding and holding airin the tires until
repairs are effected.
Per doz., $ 1., 10. Each, l.lc.
61
)N STANDS ON THE MARKET. Al
SCHRADER UNIVERSAL
99-4. 99-3
Valve Parts
No. 1, Caps per doz., $0.53
2, Cap Washers, per 100, .75
No
3, Plunger
4, Inside Parts per doz.
5, Plungers
6, Plugs
8, Springs
.40
.67
.35
.15
.10
Valve per 100,
" per doz.,
" each,
Metal Base.
Per doz.
Each..,
.$2.00
. 0.17
No. 1O
Dunlop Metal Base.
Per doz $1.67
Each 0.17
Valve Tubing.
No. 11
Valve and Stem complete.
Per 100 $15.00
Per doz 1.67
Each 0.20
No.
Valve Stems
Per 100.
Per doz.
0.50
WOODS BROS.'
.per foot, 8c.
All Metal. No Rubber OP Leather used In Construction of Valve Parts
No. 13
Valve.
Per.100 $9.00
Perjdoz 1.13
Each.. . 0.13
No. 14
Metal Base.
No. 15
Metal Base.
Per doz.
Each ..
.$2.00
. 0.17
Per doz.
Each...
$2.00
. 0.17
62
TIRES
0. R. CO. Double or Single Tube
Per pair $8.00
DUNLOP DETACHABLE
Per pair $10.00
INNER TUBES
MADE OF BEST STOCK
Butt End or Continuous Pattern, X Quality per doz., $10.50
XXX Quality " 13.35
Vulcanized Butted Ends for repairing Inner Tubes " 2.20
TREAD BANDS
Corrugated Protection Strips, for 28" wheels
each, $1.00
1.33
.25
.each, 90c.
BICYCLE GEAR TABLE
For 28-inch Wheels
For 30-inch Wheels
Teeth on ront
Teeth on front
chain wheel.
Teeth on back chain wheel. chain whui
Teeth on back chain wheel.
16
7
04
8 10 i Trimming Knife
~>" *l 44?. i, 30c.
7 8 9 10
OS' till .->3i 48
17
08
-V.i! r,2: 47 ;
73 03 i .",(i 4 ; ")1
18
7"
03 .->(! r,0- 18
77 07! 00 .14
*::::::::;::
70
80
00! .V.I.', ,->3! 19
70 1)2;-; .-)(> 20
si! 71 i 03 1 .-,7
s.V, 7-1 iit>v 00
21
84
73! 65] 21
!Ml 7s v 70 c,.s
22
ss
77 68J (il 22
'.M; 824 7:i! t;o
23
112
80J 71fl <14: 23
118! Sli! (ill
24
!t(i
84 74H 67 24
103 90 so 7-2
26
104
( .H MI; 72' 26
111! 07.! stiv 7s
28
112
'.is 78 28
120 10.-) 113 S4
30
!><
in.', 934 84 30
128 112 100 ilo
32..
128
H-> 95J 32
137 120 100 <Mi
TIRE REPAIRS
100
101
PLUGS
1O2 103
PLUGGING PLIERS
104 105 106
7/ A 3/^ 5/0 t/ n i/ n 3L I/
'o Zft /8 /2 /2 x d ^
These plugs have oval steins and conform more
easily to ordinary cuts.
Assorted per doz. 25c.
UMBRELLA PLUGS
No. 87. Curved nose Per pair, 60c
Nos. 1, 2, 8, assorted per doz. 15c.
LATEST INVENTION IN PLUGS
No. 88. Flat nose per doz., $1.00 ; each, 12c.
FIG. 3
Fig-. 3. The Strauss Curved Plugs are made in
three sizes : ^", 1", 1X"> anc ' conie in strips of one
dozen each. The special feature of this plug is that
it conforms to the shape of the tire and is bound to
adhere to it. They are provided with a string, and
are inserted in the usual way. These fplugs will
supersede all plugs at present on the market, and
are the only plugs that will repair a cheap tire.
Figure 1 shows the old style, and Figure 2 our
Curved Plug with the natural position in the tire.
Assorted per doz., 30c.
FLAT PLUGS
Per doz. .. 15c
PLUGS WITH STRING
No. 89. Valve Pliers (as cut) . .
" 90. " " forged ...
TIRE LACING
...each, 25c.
" 50c.
i oz. rolls per doz., $0.2")
i oz. " per gross, 2.50
lb. " per lb., O.tiO
Waxed Linen
Cards, waxed linen
i lb. balls waxed linen
i lb. " hemp
Small, 10c., Large, 20c. doz.
64
TOOLS
No.
Bent Handle Trimmers, Saw Tooth for Canvas work Each, 85c.
No. G361 No 1OO
Bent Nose Trimmer for Patch work. ..Each, 45c. Pointed Trimmer for Patch work. ..Each, 80c.
No. 5
Pointed Trimming Knife.
Each, 80c.
o
o
No. 15 No. 25
Round Pointed Trimming Knife. Straight Pointed Trimming
Each, 30c. Knife. Each, 15c.
No. 24
Revolving Tire Punch... Each, $1.20.
No. IO
Single Tube Tiie Punch. ..Each, 45c. '
85
VULCANIZERS
The Invincible Vulcanizer
High Pressure Hot Water Vulcanizer
This Vulcanizer is the
least complicated, easier
operated, and most effect-
ive on the market. It
takes only a tew minutes
to heat up, and the burner
is so adjusted that it can-
not be heated too hot.
Common stove gasoline is
the fuel used.
Each Vulcanizer is
carefully tested.
Full directions for oper-
ating and instructions for
vulcanizing are sent with
it.
Invincible Vulcanizer,
including material
for twenty-five or
more repairs.
Each.. ....$7.00
High Pressure Unvulcanized Patches
with Strings
i One-tt>ird 5 j ze )
Small size, per doz 30c.
Medium " 40c.
Large " 50c -
Extra large "
Patent pending)
.6(k
Stuff No. A.
B.
Vulcanizer Supplies
Single Tubes Pints
For first coat . . .
" second coat
lOc.
30c.
Per sq. foot
Stuff No. C. Canvas to apply inside 30c.
" D. Unvulcanized Rubber to
apply outside
$0.30
1.50
Sq. yard
$1.85
Per Ib.
$1.35
Kach
Hardwood Pegs ^~S.ftf. . lOc.
Rubber Forms lOc.
Sheet Metal Forms lOc.
Soft Metal Forms . lOc.
Hardwood Forms lOc.
Soapstone
Powdered, per Ib lOc.
Casing Tools
N:
No Extra Valve Stem Core
This Vulcanizer is constructed with a hot water jacket lying
underneath the Thermal or Heating Plate, and acts as a sheet
of water through which the heat passes before reaching tire,
obviating the danger of unequal vulcanization. The lower plate
is extended for the purpose of protecting the tire from any heat
that may possibly come from below. On either end of this plate
is provided indentations to hold water, keeping the ends of the
plate and tire cool. The tire is held carefully in place by the
upper plate and pressure screw.
The Burner is located in the base of the Vulcanizer. The
Improved '99 Burner for this Vulcanizer is raised free from the
base and burns freely with an even heat. This burner is sup-
plied with a specified quantity of alcohol sufficient to generate
the amount of heat necessary to properly vulcanize a tire.
The Vulcanizer is automatic, as the vulcanization is complete
when the alcohol is consumed. It is economical, and by follow-
ing directions carefully we can assure the operator ultimate
success.
Full directions for operating, and a small amount of supplies
.ccompany each Vulcanizer.
No. 2 Hot Water Vulcanizer, complete, each ...... $9.00
Tube Horn
Cement Kettle
For patching casings inside.
Set of 5 pieces
For Directing Tubes into
Casings.
$3.00 Each 12c.
Kettle complete with burner and
Gas Tube $3.20
Kettle only, each l.HO
66
CYCLE ENAMEL
ENAMELING OVEN
CYCLE BLUE
ORANGE
BRONZE GREEN
WHITE
SNUFF
WINE
VERMILION
.DEEP GREEN
ROYAL PURPLE
ENAMEL OVEN
THERMOMETER
1TJE
n
^rP
I
;
Each, $2..-><>
AIR
DRYING
Gals.
Qts.
Pts. J pts.
Large Tins.
Small Tins.
Black
$1.50
0.45
it. -25 0.20
0.18
0.15 each.
(i
2.00
1.60
1.35 doz.
Colors ....
.30
.20 each.
3.20
2.00 doz.
B,
&KING
Black
$1.50
0.50
0.30 0.20
.... each.
Colors
5.50
1.40
0.75 0.40
Varnish ....
5.50
1.50
0.80 0.45
....
ENAMEL BRUSHES
VTO
Ox Hair, 1-inch, Tin Handles and Caps per doz., $4.50
Bear Hair, 1-inch
.per doz., $1.75
67
This is the Torch included
with Oven
Holds 1 gallon ; will burn 8 hours.
Also used for burning enamel off frames.
Each, $5. (to
No. 1. Perfection Hot Blast, made of heavy
galvanized iron, double walls. Hi inches
wide, 28 inches deep, 4 feet 9 inches high.
Holds '2 frames, including forks.
With Thermometer and Burner, each, $24.00
No. 2. 34)4 inches wide, 28 inches deep, 4
feet 9 inches high. Holds 5 single frames
and forks, weight 150 Ibs.
With Thermometer and Burner, each, $36.00
No. 0. Electric Hot Blast, galvanized iron,
Single walls, 15 inches wide, 28 inches deep,
3 feet 9 inches high.
With Thermometer and Burner, each, $18.00
Above also supplied for gas.
GASOLINE BRAZER
AND FORGE
Tanks Tested to 20O Ibs. Pressure to the
Square Inch.
SWIVEL BURNER Mammoth
BRAZING BELLOWS
Burners adjustable to any angle. Powerful hot
blast, blue flame, devoid of smoke, capable of quickly
brazing the heaviest bicycle Joint. Flame easily regu-
lated to any size. Works efficiently with air pres-
sure of 35 to 75 Ibs. It is safe, portable, easily
operated.
Complete, with gauge and pump, each, $30.00
COMBINATION HOT BLAST
No. 378. Brazing Bellows
BLOWPIPE
.each, $24.00
No. 27G. Fitted with self-acting and regulating valves and con-
tinuous lighting jet. By releasing lever gas valve closes. Quantity
of gas consumed can be regulated to suit description of work to be
brazed. Each, $7.50.
BRAZING SPELTER
We keep only the very highest grade procurable.
Grain per lb., 40c. Strip per lb., 40c-
BORAX
Lump _ -y*^ .per lb., lie. Powdered per lb., 13c-
BORACIC ACID
Per lb 20c,
DIXON'S
BRAZING GRAPHITE
Is the best anti-flux known. It prevents the spelter or brass from
sticking to the work, and saves time and money. No filing is neces-
sary where this is used. Send for sample. Per lb., 50c.
STEEL WIRE BRUSH
Works with pressure of 35 to 75 Ibs. Indicator
registers 100 Ibs. pressure. Generators of special
bronze. Burners can be operated independently. M
Flame easily regulated to any size blast. ' 1'
Complete with gauge, no pump, each, $25.00 j ;
Round, as per cut each,[50c,
2- Square, 5" wire, 4 row " 50c.
3. Oblong, 3 row, with long bent handle " ^40c,
68
WILEY & RUSSELL BICYCLE SCREW PLATES
N RIVER Bl
_CREW PLAT_
AND TAP WRENCH IN 6 INCH STOCK.!
SIZES IN iZ INCH STOCK.
No. X
No. O
FI6.M43 STOCKS 6 IN. AND 22 IN. LONG.
Per Case
No. 150, Case containing 5 sizes, with Stock, Tap Wrench (fitting in stock), No. Dies.Guides and Taps $8.25
" 152, " 7 " " " " " " " " 10.50
" 154, " " 10 " " " " " " " " 14.65
" 158, " " 15 " " " " " " " 2065
41 143, " " 21 " with 2 Stocks, " " "
consisting of 10 wire gauge sizes and fractional sizes. ^ 9 T 40 , -z 36 , T 3 ff 32 > sV 28 ' i 24 ' T\ 24
f 24 T V 4 . i a4 > I 28 .! 28 , outside diameter of Dies T \ and over, 2 T V 40.15
" 133, Case containing Stock 10" long and 7 sizes of Taps, Dies and Guides, 24 , Y\ 24 , T \ 28 , f 20 ,
I 24 > TV 80 ; pr 24 . outside diameter of Dies, 1 T V 17.25
" 350, Case containing 5 sizes, with Stock, Tap Wrench (fitting in stock), No. X Dies and Taps,
outside diameter of Dies f" . 6.60
" 352, Case containing 7 sizes, with Stock, Tap Wrench fitting in stock), No. X Dies and Taps,
outside diameter of Dies, f" 8.90
" 354, Case containing 10 sizes, with Stock, Tap Wrench (fitting in stock), No. X Dies and Taps,
outside diameter of Dies, f" 11.65
REGULAR SIZES OF DIES AND TAPS CARRIED IN STOCK
Wire Gauge sizes Nos. II 56 , 12 48 , 12 56 , 13 48 , 18 56 , 14* , 15 66 , 16 56 , 17 56
Machine Screw sizes Nos. 2 se , 3 48 , 4 3e , 6 32 , 8 32 , 10 24 , 12 24 , 14 20 , 16 16 , 16 20
Fractional sizes ......... Nos. T V. A 48 . A 44 , i 40 , A 40 .
. r
U 33 > *V 4 > U 20 i 20
U 20
W. R. No. O Dlfcfe AND GUIDE
W. R. No. O STOCK
Taps
Cases, 5 sizes, each, 55c.; 7 and 10 sizes.
Patent Elastic Stocks, 6" long each, $1.15
Dies, 1" diameter " .90
Guides " .25
.40
.65
Explanation of Dies and Guides supplied in No. Bicycle Screw Plates The cut shows a Die and Guide complete ; also a Die
taken apart to show the mechanism. The cup-headed screw on the right holds the halves together as a hinge, while the size
is regulated by the wedge-shaped screw on the left, the Die being clamped in the Elastic Stock. It is readily adjusted without
danger of breakage common to Dies open only on one side and solid on the other.
No. X
ELASTIC STOCK t TT J PAR
ADJUSTABLE DIE TAP WRENCH
PRICES OF SINGLE PARTS
Stock, 5i" long each, $0.60
Dies, f" diameter " .60
Taps " .40
Tap Wrench " .60
Cases, 5 sizes. 55c ; 7 and 10 sizes ... " .65-
69
BICYCLE TAPER TAPS FOR REPAIRERS
Butter-field & Co.'s
The Wiley & Russell Mfg. Co s
II
g
I i
i
24
4
3
i
Threads 20 to 32, each $0.45
20 to 32
20 to 32
20 to 32
20 to 32
20 to 32
20 to 32
0.50
(i 55
0.60
0.70
0.80
0.90
ao 24 22 ao is
No. 1. Size r v, tapering to JJ, 4 inches long,
Threads 18 to 32, each $1.00
No. 2. Size ,'',,, tapering to , T ^, 4 inches long,
Threads 18 to 32, each 1.30
No. 3. Size, {-,';, tapering to ;|{, 4 inches long,
Threads 18 to 32, each 1.65
INSIDE AND] OUTSIDE CHASERS
& CO. BICYCLE SCREW PLATES
BUTTERF1ELD & .
BiCYGtE SCREW PLATE
WITH 22 BICYCLE TAPER TAPS-
14 DIES INCLUDING TAP WRENCH
Standard Pitched, 3
to 8, each $1.15
Standard Pitched, 9
to 30, each 80
B.&CO.
BICYCLE SCREW PLATE
No. 99. Case containing stock 12 inches long, with 14 pairs
Dies, X x 24, 32 ; 7 \ x 18, 20, 22,24, 26, 28,32 ; y 2 x20,
24, Right Hand. ^ x 20, 24, Left Hand. 22 Bicycle
Taper Taps '4 x 20, 22, 24, 2(5, 28, 32 ; /', x 20, 22," 24,
2(5. 28, 32; ft x IS, 20, 22, 24, 2(5, 28; V 2 x 20, 24, Right
. Hand; ^ x 20, 24, Left Hand. Including one pair of
Tap Wrench Dies, per case $2( UK)
No. 151. Case containing 5 sixes Taps, Dies and
Guide, with Adjustable Tap Wrench, per case. $6.30
No. 153. Case containing <> sixes Taps, Dies and
Guide, with Adjustable Tap Wrench, per case.. 7. ID
No. 157. Case containing 10 sizes Taps, Dies and
Guide, with Adjustable Tap Wrench, per case. . 10.20
Prices of Single Parts fop Sets Nos. 151, 153 and 157
Stock, i: inches long, eacli $1.00 Taps, each $0.3.)
Dies, v s diameter, each 0.40 Tap Wrench No. 0, each 1 ">()
Guides for Dies, each ... 0.20 Cases, each (l -40
Sectional View
of Die and
Guide.
70
FILES
BASTARD.
SECOND CUT.
SMOOTH.
MILL FILE
JOWITT'S FILE LIST
Size in inches
4
4}4
5
6
7
8
9
10
11
12
Flat, halt-round, round, square and mill saw bastard..
Flat and half-round, second-cut and second-cut mill saw
Flat and half-round, round and square-smooth, cabinet
files and rasps
Flat and half-round dead smooth . '\..) ^^
Hand bastard and warding
Sl.l.->
1.35
1.65
2.50
1 -2.->
1.25
1.4.5
l.SO
2.7"
1.40
1.40
1.1 ill
2,00
3.00
1.50
1.70
_>.((
2.30
3.60
1 1 1
2.10
2.40
2.80
4.20
2.S5
2. fill
2.90
3.30
4.80
2.90
3.00
8.25
3.7.->
.->. 71 1
3.60
3.60
4.10
4.60
6.86
4.3.-)
4.3a
4.80
.->..-).-)
8.40
5.20
5.20
.-).7.%
6.40
9.60
6.00
Hand smooth
1 Si)
2.00
2 1.")
2.7.')
3.2.")
171
4.60
.">..">.->
6.40
7. -20
Knife files, bastard
'Hi)
' 30
> .->.->
Half-round wood rasps
2. (ill
3.00
3.60
4.35
5.20
Round wood rasps . . .
3.25
Size in inches
3!4
4
4>-,
5
*y,
6
7
g
9
10
Taper saw files
0.95
1.10
1.20
1.35
1.56
1.80
2.30
2.90
3.7.')
4.7U
Band saw fileS
1 .").">
1 Sll
' or,
> 30
2.55
2.90
Pit or frame saw files
1.4H
1.55
1.80
2.06
2. .V>
3.2.->
3.85
4.80
EMERY WHEELS
FELT BUFFING WHEELS
Hard, medium or soft grades.
lix 1 8x1 8x1 ', Hlx 1 1 2 inches.
$1.15 -2.311 2.8.-> 4..-)U each
EMERY CLOTH
Xos no (i " 2 1 \y z 2 2>i 3
Per quire .. $1.00 1.10 1.30 1.40
EMERY POWDER
Corn, Xos. .">4 to 120 per lb., lOc.
Flour " lie
STEEL WOOL
For polishing- frames.
Polishing Rubbing Scouring
Nos 1 2 3
Per lb. . . Nile. l)(ic. .')3c. 4dc.
NO. >*:?.
Diam. A
1
i
]* in. face.
3 $0.80
0.95
1.10
1.40 each
4 1.10
1.35
1.60
2.10 "
(i 1.75
2.40
3.00
4.3.-) "
s 2.60
3 lio
4.60
li.liH "
lo 3. (in
5.10
6.60
1) .-II "
12 -Mill
.->.7.->
7.3.->
10.70 "
AI
THOMPSON'S HACK SAWS
N.I', extension (S-12 ins.) frame, with one blade each, 1.50
Kxtra blades, 8", 96c.; 9", $1 ; 10", $1.07 per do/..
EMERY WHEEL DRESSERS
FILE CLEANERS
No. 3. Steel Bushing and Arbor each, $1.2.') No. I. Mounted Cards, 4x1', inches. . . .each, 20c,
Extra Wheels and Washers per set, .70
WE ALSO CARRY A STOCK OF BLACK DIAMOND. GLOBE, STUBBS' and --GROBET'S SWISS" MAKES OF FILES.
7' I
TWIST DRILLS
Diameter
Length
Price, per doz.
Price, each
H 2f
00 1.10
.09 0.10
2f
1.20
0.11
2f
1.30
No. 1O5
i
3
1.45
STRAIGHT SHANK
5 11 3
A A it T\ II A iS i H A inch
8 i 8 i 3 I <H 8 I 9 I 8 4 4-| 4 "
1.60 1.80 2.00 2.20 2.40 2.05 2.90 3.15 8.40 3.65
0.12 0.13 0.15 0.16 0.18 0.20 0.21 0.23 0.26 0.28 0.30 0.32
Diameter
Length
Price, per doz.
Price, each ....
19
F?
IF
FT
4
25
F?
13
4f 4 4| 4
$3.90 4.20 4.50 4.80 5.10 5.40
$0.35 0.37 0.40 0.42 045 0.48
7
TF
i
5.70 6.00
0.50 0.53
6.40
0.55
H 5 5f
6.80 7.20 7.50
0.59 0.63 65
31
F?
O"Q"
7.75
i
6
8.00
0.70
inch
Diameter
Price, per doz..i
Price, each....
No. 1OO-BIT STOCK
tV A i A TF A i A A tt i . if ' A if i I inch
.50 1.65 2.10 2.60 8.10 3.60 4.10 4.70 5.40 6.30 7.20 8.00 8.80 9.60 10.30 16.20
.14 .16 .20 .24 .29 .33 .38 .48 .48 .54 .62 .68 .75 .82 .87 1.35
SOLID REAMERS
Diameter i
T6"
No.
i
1 3
TF
i s
TIT
1
9 5. 11 i
A'J o 10 2 Itj 8 T6 4
Flute, length. 2 T 3 ff 2^ 2f 2 T 7 ^ 2 T 9 ff 24 2 a 2 a 3 34 3 1 3 7 84 3^
Price, each .. $1.95 2.10 2.25 2.40 2.55 2.70 2.85 3.10 3.30 3.50 3.75 4.05 4.35 4.65
inch
Lightning Taper Reamers
The sizes are arranged to follow each other
from the smallest to the largest, so that with a set
of these useful tools any size from ^\ to 1J inch
may be accurately made. Each Reamer leaves a
round, true cut hole.
Sizes ... , 6 ( . H T ^ | T 9 ff | |
Each... $0.68 0.75 0.78 0.90 1.05 1.20 1.35 1.58
Sizes... f | | .}.. i 11 11
Each... $1.80 2.10 2.40 2.75 3.00 3.38 3.90
Centre Punches
Lightning Countersinks
Round Shanks, \ and | inch in diameter.
60 or 80 Degrees for Bolt or Screw Heads.
Each.
No. 500. Regular size, f" diam., f" cut $0.75
No. 510. Large size, f" diam., f" cut 1.18
Give style of shank and degrees wanted.
New Centre Reamer
Accurately made of
the best steel, and of
the most approved
form.
|, A.IG HTN I N G
CENTRE REAMER
No.
( Assorted, per dozen ...... $1.85
No. 530. i" Shank, cuts f, each
< 531. f" " " |, "
" 582. \" " |, "
$0.38
0.45
0.90
72
Dividers
CALIPERS
Thread
Outside
Inside
K
Solid Nut. Spring Nut.
8"... $1.25 1.45
4... 1.55 1.75
6... 1.55 1.75
6"... 1.90 2.20
Solid.
$1.25
1.40
1.40
Spring.
1.45 -' i
1.55
1.55
Firm-Joint (Outside or Inside).
Spring.
1.45
1.55
1.55
1.90
Improved Firm-Joint (Outside or Inside).
Each 3", 50c.; 4", 65r.; 5", 70c.; 6", 80c.
Each
.8", 25c.; 4", 0c.; 6", 50c.
SPEED INDICATOR
Nickel-plated, each, $2.25
IMPROVED COMBINATION PLIERS
No. 22. 6", Black, per dozen.
" 23. 6", per dozen
.$20.25
22.50
73
SPOKE CUTTING
NIPPERS
COMPOUND LEVER
Each.. ..$1.60
TT
TOOLS
No. 160 Flat Nose Pliers, G" each, $1.00
No. 156. Long Nose Patcli Pliers, 5f", each,85c.
EW1S
No. 154. Face Cueiing Pliers, <i- . each, S1.45 No. 162. Round
^SB^
Nose Pliers, G" each,
$1.00
No. 153. Side Cutting Pliers, 6"
.each, $1.20 No. 149. Bevelled Face Cutting Pliers,
6", each, $1.45
BARNARD PLIERS
No. 100 Flat Nose, <H" each. $1.20
200. Round" 5" " : 20
" HOO. Side Cutting, 5i" '' ] - KO
No. 1151. Cone Pliers, 6" .
.each, $0.55
74
No. '2. Boss H;nnd Vice, Hardened
Steel Jaws, l]"\vide, each, $1.15
GAUGES
DRILL GAUGES
WIRE GAUGES
' 1 2 S 4 5 6 7 8 9 10 11 12
.iOOOOOOOOOOOO
25 24 23 22 21 20 19 18 17 16 15 14 13 | 5
5| 00000 CGOOOOOOi:
E. * 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 1 1
sO OOOOOOOOoooooo o?|
H S60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 :
4 B eecCCOOOOCOCOOO
No. 774
Gauge numbers from 1 to b'O each, $2.25
This gauge is used for measuring' Twist Drills and Stub's Steel Rods.
No 1110
Each.. ..$3.00
31
64
15
32
Z9
64
7
16
27
64
13
32
Z5
64
No. 848
Each.. ..$3.50
QOOP.OOOO
Iooo566666
V OOOOOOO
o o o o o
V
No. 775
Jobbers' Drill Gauge, sizes from r \ T to ^ inch each. $4.uu
GRADUATED CENTRE GAUGE
No. 611
Eacli
.$3.00
Each . . .60c.
SCREW PITCH
STEEL RULES
, . : .;.... ::!;li"~:
No. 4O
Each . .. $1.50
sixe N-/: jrr ./^" \ xjy
No. 300 D. Graduated on one side. . . ,per dox., $3.20 3.20 3. HO
No. 321) D. " both sides.. " -- 4.SO 5.HO S.OO
- ^
9 T
PAT. OCX, 18, 87. ^ s
With End Graduations.
Size .......... 3" 4- 6" 9
Each ........ $0.55 0.70 1.00 1.50
12"
1.90
In this Rule the ends are graduated on one
side to 48ths and lOOths, and on the other side,
as shown in cut, to 32nds and 56ths of an inch.
The 32nds extend entirely across the rule.
The 3-in. Rules are graduated to 40ths instead
of KlOtlis on the end.
MICROMETER
. No. 15
Measures by Thousandths of
an inch up to 1 inch.
Each . ..$7.50
TOOLS
GEARED SCROLL CHUCK
THE HARTFORD DRILL CHUCK
No. 9O. With No. 1 Jaws.
No. 291. With No 2 Jaws.
With 1 set Jaws ...... each, 3", $12.50 ; 4", $15.00 ; 5", $18.75 ; 6", $22.50
' 2 sets " ...... " 3", 15.00 ; 4", 18.00; 5", 22.50 ; 6*, 27.00
THE ACME DRILL CHUCK
LIMITED
Holds from to
" self-tightening, three jaws each, $5.00
BELL CENTERING PUNCH
No. 2. Diameter.
No. 0. Holds from to X" each, $7.50
" 1. " to y 2 " " 8.75
" 2. " Oto3/".. " 10.00
IMPROVED STEEL
LATHE DOG
No. 1, ^"....each, $0.35
" 2, y 2 ,,.... " .35
" 3, X" " - 50
" 4, 1 ... " .60
" 5, IX" .- " -75
" 6, \ l / 2 " .. " .85
" 7, IX" .. " 1.00
" 8, 2 .... " 1.10
Small set of 8 Dogs,
from ^ to 2" 5.50
No.
No. 284. Letters T y, $4.40
" 265. Figures T^", 1.50
Name Stamps, per letter, -fa", .20
STEEL
MARKING
LETTERS
AND
FIGURES
No. 385
y & ", $4.40 T V, $5.40 X". $6.75
1 A", 1.50 T 3 B ", 1.80 X". 2.25
No. 8, Straight cut,
3X", each. $2.20
No. 9, Straight cut,
3", each, $1.65
OIL CAN
No. 13
Copper-plated, 3^g"
dia., 3" spout.
Each 40c.
No. 14
Copper-plated, 3)4"
dia., 9" spout.
Each 50c,
.20 T V, -30
.35
76
TOOLS
OVAL SLIDE VICE
SIMPSON STATIONARY VICE
No. 72. Jaws 3
" 73.
MECHANICS' BENCH VICE
No. 31. Jaws 4'
BREAST DRILL
.each, $9.60
TUBE VICE
No. 24. Jaws .> each, $4.65
" 29. " 3%" " 7.30
WROUGHT IRON LEG VICE
Weight
...351bs.
...50 "
...80 "
" 100 "
Per lb., 18c.
Holds Tubing at any angle.
Each $7.67
POST DRILL
No. 10
BALL BEARING, nickel-plated Stock
and Chuck, will hold both round and
square Shank Drills. The Gears are
cut, and are changeable from even to 3
to 1. Each, $4.95.
HAND DRILL
No. 1, with 6 Drill Points
" 2, " 6 " " large size.
.each, $2.10
No. 731 x 1
Each $9.50
77
TOOLS
ANVIL
Face Measure.
Q 1 ,r Q//
O <7 X O
10" x 3"
10 x 3i
13 x -1"
Weight.
41 Ibs.
55 "
78 "
136 "
Price per ib.
18ic.
SOFT COPPER HAMMER
1 Ib., each $1.15 ; H Ibs. ea., $1.35 ; 2 Ibs. ea., $1.65.
RIVETING HAMMER BALL PEIN
No. 7. Forge, hearth, 18" ; height, 30"
Weight, 75 Ibs. Half hood.
1.00.
Riveting Hammers, weights, 7 oz., 13 oz. If Ib.
T-> j <H?K cn Utn Kf\ at 17 Krt
Per doz $5.50. ijpb.50. SjpY.oU.
Machinists' Hammers, weight, $ Ib. | Ib. 1 Ib. 1 to 3 Ibs.
Per Ib... . 45c. 30c. 30c. 25c.
No. 1. Alligator Cone Wrench, 5f inches long
FORGING TONGS
.Each, 35c.
Heller Bros., Forging Tongs (see cut), 12 to 17" Per dozen, $ 5.00
No. 1 Stearns, Straight, Swivel Jaw Blacksmith Tongs 16" 15.00
No. 2 " " " " " " 18" 15-00
78
FISHING RODS
No. 4.
" 4A.
" 8.
" 17.
No. D12.
Din.
N12.
N15.
12.
15.
STEEL RODS
Brass Rod, 10 feet in length, Nickel Mounting's, Cork Grip each,
10 " " " " Celluloid Grip "
Fly Rod, 10 " Cork Grip "
Bait Casting Rod, 7 feet in length, Nickel Mountings, Cork or Cane Wound Grip "
BAMBOO RODS
Fly Rod, Six Strip Rod, Nickel Mountings, Solid Reel Seat, Cork Grip, 9)4 to 10 feet each,
7.70
8.50
LO.OO
Bait
Fly
Bait
Fly
Bait
f
"
\ K
NO.
" 46X-
\o. X8o.
" X9r>.
Fly Rod, Solid Reel Seat, Improved Shouldered Ferrules, Silk Wrappings, Scored Wood Grip, 10 feet, each,
Bait " " " " " " " 10 "
LANCEWOOD RODS
Fly Rod, Full Nickel Mounted, Raised Ferrules, Silk Whippings, Scored Grip, 10 feet each,
Bait ' " " " " " " 10 " "
Combination Rod, 3-Joint Heavy Bait Rod, 10^ feet, weight 15 ounces, or a 2-Joint Trolling Rod,
7 feet, weight 13 ouiu-es. Full Nickel Mountings, Solid Reel Seat, Silk Wound Tee Guides, Cellu-
loid Grip above and below Reel Seat "
2.7/i
2.7r>
1.75
1.76
$3.r>0
3.50
$2.05
2.05
4.0.1
FISHING REELS
ONTO,
No.
No.
No.
No. 102P
Single Action, Raised Pillar, Rivet Brass Reel.
102P. Capacity 2.') yds per doz., $1.70
106P. ' tin '" " _'.-':
Single Action, Raised Pillar, Riveted Brass Reel,
with Click, Nickel-Plated.
204PN. Capacity, 40 yds per doz., $3.40
206PN. " tin '" . " :!.7t>
No OO:tO4
Single Action, Raised Pillar, Screwed Brass Reels, with
Flush Balance Handle and Back Sliding Click,
Nickel-plated.
No. OH304PN. Capacity 40 yds per doz., $6.85
11 00306PN. " 60 " " 7.45
" 00307PN. " 80 " . " 8.00
Double Multiplying, Raised Pillar, Balance Handle, Screwed Brass Reel, with Patent
Adjustable Slide Drag, and Back Sliding Click.
Per dozen Per dozen
2904PN. 40 yds., N.P... $9.tiii No. 002904PN. 40 yds., N. P., with Rubber Cap. . $12.0O
2906 PN. tin " " !()..-)( i " 002906 PN. 60 " " " " . . 13. CM)
2907PN. sti '< " 11.4ti " 002907PN. sn " " " " .. U.CM)
" 00290SPN. lilt) " ' " .. !.-)..-)(>
If you deal in above, write for our Sporting Goods Catalogue.
79
Size Nos
No. 2544
FISH HOOKS
SPROAT TAPERED HOOKS
No. 2544
12tol 1-0 2-0 3-0
per 1000 $1.15 1.45 1.65 1.90
n
CARLISLE FISH HOOKS
n
(0
Size Nos.... 12 to 1
No. 2613 Ringed per 1000 $1.00
" 2614^ Marked... " 1.00
1
1.25
1.25
20
1.45
1.45
(C
*4V
80
1.70
1.70
4-0
1.95
5-0
2.15
60
2.25
KIRBY AND LIMERICK FISH HOOKS, RINGED
Size Nos 12tol 1-0 20 3-0 4-0 5-0 6-0 70 8-0 9-0 100
No. 1939 Kirby bend... per 1000 $0.63 0.80 1.00 1.15 1.30 1.50 1.90 2.45 3.20 4.15 5.00
" 1937 LimePick " 0.63 0.80 1.00 1.15 1.30 1.50 1.90
One hundred in a box.
If you deal in above, write for our Sporting Goods Catalogue
80
TROLLING BAITS
FLUTED
PICKEREL
COBOURG
Size Nos.
DIAMOND C.
FLUTED
..4 4 5 6
8
Fluted Bait, nickel-plated, per doz., $1.15 1.15 1.15 1.15 1.15 1.15
PICKEREL
Size Nos 4567
Pickerel Bait, nickel-plated per doz , $1.05 1.05 1.05 1.05
COBOURG
Size Nos 8 4-5 6 7 8
Cobourg Bait, nickel-plated, per doz., $1.25 1.25 1.25 1.25 1.25 1.25
DIAMOND C.
Size Nos 321 1-0
Diamond C., nickel-plated, gold end per doz., $4.00 4.00 4.00 4.70
ALLURE
Size Nos 3211-0 2-0
Allure Bait, nickel and brass per doz., $7.40 7.40 7.40 8.10 8.10
scale for sizes of spoons If you deal in above write for our Sporting Goods Catalogue
i
81
BASE BALLS
No.
1.
0.
20.
30.
40.
50.
60.
70.
80.
League Ball adopted by Western Association per dozen , $20.60
" Double Seamed Ball," Double Stitched, warranted to last a full game
Regulation Size and Weight, a first-class ball
" " Horsehide Cover
" " " " and well made...
Rattler,
Boss,"
" good Boys' ball
Boys' ball ...............
20.60
10.80
J8.10
5.40
2.70
1.65
1.05
0.60
BASEBALL BATS
LOUISVILLE SLUGGER
Louisville Slugger, best selected Ash, well balanced and finished ................................. per dozen,
No. 3-O. Highest grade Ash, thoroughly seasoned, well balanced and finished ...............
" 1A. Extra quality Ash, Antique Finish, highly polished ... .................................
" 1C. Finest selected English Willow, highly finished ..........................................
" 2A. Excellent quality Ash, carefully selected, highly polished ..............................
" 8A. Extra " " Antique Finish, best Boys' bat made .......................
" 7 Ash, highly polished, red end, length 30 inch ...........................................
" 9. " < " 26 " .............................................
If you deal in above, write for our Sporting Goods Catalogue.
$14.00
12.85
7.00
7.00
8.85
I- 50
82
BASEBALL MITTS
98.
91.
100.
92.
93.
80.
101.
43!
42.
41.
32X.
7X.
2! >.
3X.
No. 99
No. 92
No. 3x
Professional Catchers' Mitts, with patent rubber finger guard, padded with best asbestos padding, patent
lacing, best coltskin _ , . r*. .1 -F ? ^ f* each,
Same as No. 99, but alj^tle siAiHe*""*. -\A/. I . -^ yl^ .__. "
" " 98, but made of asbestos calfskiA tv? . . . AJ. . .
" " 98, with reinforced patch in palm, without the patent finger protector
Mouse colos^cotoJ^in^vmh patent lacint^ %\.\ T-f-j)
41 ^Ll \ without lacing
Gold tan leather back, " Youths' large size " ,
" canvas back, " Boys' large size "
Baseman's Mitts, drab colored coltskin, very flexible
" " " palm, red leather back
" Craven tanned leather
" yellow leather
Gloves, mouse colored buckskin, padded palm
" drab colored coltskin "
drab chrome tanned leather.
$8.00
6.00
r>.3f>
2.70
2.00
I. HO
.70
.40
2.70
2.00
1.00
.80
1.00
2.70
1 60
1. 1 10
INFLATED BODY PROTECTOR
1. League Catchers' Protector each, $1.'). !.">
1A. Amateur " " " !>..'>o
IB. Boys' " " " x.iju
CRICKET BATS
No. Al.
2A.
4.
3.
li.
Nos
Each
,
Patent Double-spliced, Spring-Handle Bat, thoroughly seasoned, hand hammered, edges and face hardened
in such a manner that the wood is still in possession of its natural elasticity, accurate in balance,
specially selected and stamped " Arthur Shrewsbury" each, $7.80
"Specially Selected" Match Bat, are made with very best rattan canes^the joints are fitted in an improved
manner which^gtves them enormous strength and a splendrtl sVrin^, while "jarring" is entirely
obviated, &nd|he hkrffejet lut can be made without feeling the slightest sting each, $.">.9.'
All Cane Handle ClurjsBa^ jXec/ed\p9c\^ torn* for-elub use f . . .1. V-^- " 3.7.')
Men's All Cane Handle Bats, Jboista Jpe\J. . .1 . .1 . . .1 ^^^ " 2..~iO
" " " selected . ' 2.(i(
YOUTHS' POLISHED BATS
$0.r>0
04
( i. sr,
U6
1.15
CRICKET BALLS
No. 1A. "Specially Selected," Treble-Sewn, Match Balls, warranted hand-made, regulation size and weight, as used
in all matches played by the Earl of Sheffield's team in Australia, also the great matches in England,
including England and Australia. Highly recommended by Dr. W. G. Grace and the leading English
bowlers each, $i_'..~io
Treble sewn, hand made, strongly recommended, a really first-rate practice ball
Double seam, hand made, regulation size and weight, a good sound ball, will stand a lot of wear
Youths' two-seamed, hand made, small red, halves
Youths' three-seamed, hand made, large red, halves
Composition, regulation size, good practice ball
If you deal in above write for our Sporting Goods Catalogue
2.10
I. .io
.95
1.40
.Jo
83
GOLF STICKS
WOOD CLUBS
Bulger Drivers each, $2.40
,. , T-. T-> " _ _ 1 (\(\
Bulger Driver Brassies
Drivers .....
Mid Spoons
Brassie Niblics
Brassie Spoons
5.00
2.20
2.7.->
SIMPSON'S
IRON CLUBS
Cleeks each, $2.75
Putting Cleeks " 2.75
Irons " 2.75
Mashies " '2. 75
Gun Metal Putters " 3.<">
EXTRA HEADS AND SHAFTS
Heads for Bulger Drivers .....................
t " " Brassies
Heads for Cleeks ........................... '
Shafts for any.style of Head
We also keep in stock a nice assortment of
same prices
.each, $L45
"'^ r
J-MJ
Clubs, made specially lor Ladies' use, at
as above.
GOLF BALLS
The Edinburgh," Regulation size. This Ball is used by all the leading Clubs . . .
LACROSSE STICKS
per dozen, $5. '25
Nos. 4 to
No. 1.
No.
No. 4.
No. 6.
No. 6.
No. 12.
No. 13.
No, 14.
g___ JB b
No. 15.
3 ft. 10 in
4 ft., sarr
4 ft. 6 in.
4 ft. 4 in.
Same as
4 ft. 6 in.
Same as
4 ft. 6 in.
We
Same as
ooc- DAI
doz.
Vractice Stick, 16ths to the dozen, made of the Best White Hickory and Fine Line Strings
No. Iz, only Lett riana
C.L.C. Stick, Choicest White Hickory, strung with Syor Strings, with Clock Cord m
1 G ,oH<> /-.f R^at ^nft Pure Rubber . .
$8.45
9.85
16.90
15.50
15.50
21.10
21.10
28.15
28.15
4.30
LAWN TENNIS RACKETS
v*
Assorted Weights, 10$ to 15 ounces.
Bristol, White Ash Frames, strung with Oriental Gut
Standard,' " ^ Full Size, High^Grade .
Eclipse, Best
Horseman, Best " " " Tournament Strung, Scored Handle
Ladies' Special, Best White Ash Fraim-s, strung with Oriental Gut, Scored Handle
LAWN TENNI BALLS. No. 1, College Championship, Regulation Size
.per
each, 1.85
2.45
3.25
4.00
5.00
5.00
doz., 4.25
If you deal in above, write for our Sporting Goods Catalogue
84
HAMMOCKS
WITH PILLOW
WITH VALANCE
fo. Al.
B2.
B4.
B5.
E4.
E5.
G5.
K4.
NE4.
NE5.
P5.
Qv
Fu
i
i
i
larter Cc
" S
lor, 34 x 70"
86 x 76"
' 36 x 76"
' 36 x 76"
1 86 x 76"
36 x 76"
40 x 78"
' 41 x 78"
86 x 76"
36 x 76"
40 x 78"
Open Weave
$11 70
one Patent Wood Spreader
14.50
18.00
Spreader and Pillow
" and Valance
. 30.00
Combination Weave Spreader and Pillow
25 00
Pillow and Valance
87.00
51.00
29.50
28.00
. 40.00
50.00
Twilled " " " "
Open " and Pillow
Corded " Stretcher and Pillow
" Pillow and Valance....
" " " Pillow and Valance...
QUOITS
London Pattern, Superior Wrought Steel, Hardened and Polished.
Weight per pair 4 5 7 8 10 12 14 16 Ibs
Per pair $1.90 2.35 2.75 3.20 3.60 4.90 7.00 8.50 10.20*
MALLEABLE IRON QUOITS
Weights, 3, 4, 5, 6 7, 8, 10 Ibs. each
DUMB-BEL
each
LLS ONTO. Q
PITCHING SHOT
per lb., $0.12
IRON
Weights, H, 2, 3, 8, 4, 4, 5, 6, 7, 8, 9, 10, 12, 14 Ibs.
Perlb ....... . ............................................. $0.08
WOOD
Made of Selected Maple, Oiled, Lathe Polished.
Weights ... J
1
1
2 3 Ibs.
Per pair... $0.20 0.28 0.30 0.40 0.50 0.60 0.70
Weights, 10 to 50 Ibs per lb., $0.08
INDIAN CLUBS
Made of Selected Maple, Oiled, Lathe Polished,
well shaped and balanced.
Weights... f 1
3
5 6 Ibs.
Per pair $0.25 0.35 0.40 0.50 0.60 0.90 1.00 1.15
If you deal in above, write for our Sporting Goods Catalogue.
85
BOXING GLOVES
No. O20
No. 02~ Boys' Boxing Gloves, made of Gold Tan
Kid, Elastic Wrist, and filled with Curled
Hair. Style as 024.-.. \ \-J. ^
-Boys' Boxing Gloves, made of White Kid,
Elastic Wrist, filled with Curled Hair Style
as 024
-Boys' Boxing Gloves, [made of Gold Tan Kid,
Elastic Wrist, and filled with Curled Hair.
Style as 020
Boys' Boxing Gloves, made of Wine Colored
Kid, Elastic Wrist, and filled with good
quality Curled Hair. Style as 0'24
03X Boys' Boxing Gloves, made of Wine Colored
Kid, Elastic Wrist, and filled with good
quality Curled Hair. Style as 020
-Men's Boxing Gloves, made of Wine Colored
Kid, Elastic Wrist, and filled with good
quality Curled Hair. Style as 020
-Boys' Boxing Gloves, made of White Kid,
Elastic Wrist, and filled with Curled Hair.
Style as 020
013 Men's Boxing Gloves, made of Benton Tan
Kid, Laced, and filled with superior quality
Curled Hair. Style as 024
NO. oas
Per si
Per set
07 -
02X-
03
04 :
07X I
No. 024
\ . (U3X Men's Boxing- Gloves, made of Benton Tan
Kid, Laced, and filled with superior quality
S 1 . 7.". Curled HsAtJ ptyl<| as 020 $6.00
" 020 Men's Boxing Gloves, made of fine imported
Colored Kid, fac-simile in style of the
gloves used at the Corbett-Mitchell contest
at Jacksonville. Laced, and filled with the
finest quality of Curled Hair 8.00
024 Men's Boxing Gloves, made of Benton Tan
Kid, Gold Tan Palm, California Thumb,
Padded Wrist, Laced, and filled with a
superior quality Curled Hair 5.35
02(5 Men's Boxing Gloves, made of White Kid,
Elastic Wrist, and filled with good quality
Curled Hair. Style as 020 3.35
027 Men's Boxing Gloves, made of White Kid,
Elastic Wrist, and filled with good quality
Curled Hair. Style as 024 2.40
030 Men's Boxing Gloves, Made of Gold Tan
Kid, Elastic Wrist, and filled with Curled
Hair. Style as 024 2.40
030X Men's Boxing Gloves, made of Gold Tan
Kid, Elastic Wrist, and filled with Curled
Hair. Style as 020 3.00
2.40
2.40
4.00
5.35
The better quality of Gloves are stocked in 6 and 8 ounces. S ounces will be sent unless weight is specified.
STRIKING BAG GLOVES
No. 034 Oil Tan, Padding in Back ."}\ P er P air ' $- 80
< 032 Wine Color Padding in Back, with Hand Bar in Palm . -V \ X
STRIKING BAGS
Complete with Bladders. Double Loop and Rubber Cord.
No. 81XB Oil Tan Yellow Bag, 27 inch ............................. each, $2.30
" SIX- " " 30 " ......
" 81 Lined Oil Tan Yellow Bag, 30 inc-h
" S4 " " " 30
" CM Lined Craven Tan Dark Bag, 30
" S2X " " " 30
" si; Lined Green Tan " 32
" C Best Grained Leather Bag, 30
Double Seamed . . .
Welt "
Double "
Welt " ....
Hand Sewed
2.50
2.1)0
3.10
4.45
5.15
3.40
(.40
Single Loop, for using with Platform.
No. SI Lined Oiled Tan Yellow Bag,30 inch each. $2. 25
Craven Tan Dark
Green Tan
25
Sli
s:;
C Best Grained Leather
C
30
32
32
30
32
with Seam
Double Seam
Hand Sewi-d
3.10
4.50
ii.20
2.7.'.
3.75
DOUBLE LOOP
If you deal in above write for our Sporting Goods Catalogue
SINGLE LOOP
si i
DOG COLLARS
UNLINED
LINED
UNLINED
o. 260. X inch wide, lengths assorted 9 to 13 inches, Brass, Nickel-plated. . per dozen, $2.00
" 26L " 13tol? "
WITH HARD LEATHER LININGS
No. 250S. Yz inch wide, lengths assorted 9 to 13 inches, Brass, Polished. . ner dozen $2 70
; 251S. X 13 to 17 " " " " 3.55
" Nickel-plated " 3.05
" 3.75
5.20
260S.
" 261S.
" 282S. 1
9 to 13
13 to 17 "
17 to 21 "
No. 250C.
251C.
WITH CHAMOIS LINED LININGS
inch wide, lengths assorted 9 to 13 inches, Brass, Polished . . per dozen, $4.50
13 to 17 " " " KIR
261C.
9 to 13
13 to 17
5 15
Nickel-plated.. " 4.'65
. 5.40
No. 427
Nos. 915 and 925
'o. 427. Length
406. ^ inch
407. 1
415. IX
465. 2
605. y 2
915. %
925. X
935. IX
s assorted
wide, lenj
13 to 17
jths ass
inches, Black L<
Dried 13 to 17 inc
16 to 20
18 to 22
25 to 29
9 to 13
9 to 13
11 to 15
14 to 20
;ather, Nickeled
nes, Russet Lea
Black
Russel
. . <
Trimmin
ther, Nic
Chai
gs and Studs per
doz., $18.00
8.65
10.00
13.00
16.60
5.75
6.50
7.25
10.00
celed Trimmings and Studs. . . .
lois Lined, Nickeled Trimmings
No. 945
No. 954
No. 94."). 7/ & inch wide, lengths assorted 13 to 17 inches, Russet Leather, Chamois Lined, Nickeled Trimmines ner doz $8 65
"^954. % " " lo to 19 " " " -'* <, ' i.^QO
CARTRIDGES
RIM FIRE
Blank Cartridges same
B.B
C.B
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.22
.25
.25
.30
.30
.32
.32
.32
.32
.32
. Caps.
Short, 50 in a box
" 100 "
" Mushroom, 50 in a box
100
Long, 50 in a box
" 100 "
Colt's M.R. Short, 50 in a box
" 100
" " Long, 50
" 100
Long Rifle, 50 in a box
" 100
Extra Long
Winchester
Short
Stevens ...
Short
Long
Extra Short
Short
Long
Long Rifle.
Extra Long
list as Ba
Per icco
$4.00
4.50
5.00
5.00
5.50
5.50
6.00
6.00
:>.oo
:,.uo
6.00
6.00
6.00
6.00
9.00
9.00
8.50
14.00
9.00
10.50
10.00
10.00
1 l..->o
11.50
16.50
11 Cartridges, except .22 and .32.
.38 Short
Per 1000
$16 00
.38 Long
18.00
.38 Extra Long
25 00
.41 Short
15 00
.41 Long
17 50
.42 Calibre, No. 64, Forehand & W.
30.00
.44 Short
3 00
.44 Long
25 00
.44 Henry, Flat
24 00
.44 " Pointed
25.00
.44 C. & W
25 00
.44 Howard Long
27 00
.44 Extra Long
36 00
.46 Short Pistol
25.00
.46 Long Rifle
33 00
.46 Extra Long
46 00
. .~>(i-46 Spencer Sporting
40.00
.56-50 " Carbine
40.00
.56-52 " Rifle
40.00
.56.56 " Carbine
40.00
SHOT CARTRIDGES, .22 Long..
11.00
.32 "
9 2 00
BLANKS, .22 Short
5.00
.32 "
10.00
CENTRAL FIRE PISTOL SIZES
Blank Cartridges same List as Ball Cartridges.
No. 1 .22 Extra Long ..........................
1 .22 Winchester .........................
1 .25-20 Grs. Stevens' and Winchester Single
Shot ...............................
1J .25-20 Martin and Winchester . . .
1 .300 Rook ........................... ,
1 .32 Protector .............
1 .32 Ideal
.32 Short Colt's
.32 Long
1 .32 " Colt's Inside Lubricant
1 .32 " Rifle _.
.32 Smith & Wesson Gallery, Round Ball .
.32 " " ......
.32 H. & R. or M. H. & Co ......
1 .32 Winchester ..........................
1 .32 Colt's M.R. for Colt's Lightning Rifle
1 .32-20 Marlin ............................
1J .32-30 Remington Grooved ............
1^ .32 Extra Long Ballard ..................
ll '*-' Smith & Wesson Rifle. .
1 .32-44 S. & W. Gallery, Round Ball ........
1 .32-44 Target, Grooved ...........
.3is " Gallery, Round Ball ..
Per 1000
$13. Hi)
15.00
18.00
Hi ill)
I;,.IKI
9 00
'jn.no
Primer. p er 1000
Xo. 1 .38-40 Marlin $19.00
" 1 .38 Extra Long 23.00
" .41 Short, Colt's Single Action 15.00
" .41 " " Double "
" 1 .41 Long " " "
" .44 S. & W. No. 3 American
" 2 .44 " " 3 Russian
Russian Gallery, Round Ball.
" Grooved . . .
Hulbert & Co..
Target, Grooved .........
.38-44 " Gallery, Round Ball ........
.38 Merwin, Hulbert & Co .......
.38 Short ...............................
.38 Long, for Colt's D.A. Pistols, etc .......
.38 Winchester .................
.38 Colt's M.R. for Colt's Lightning Rifle . .
-J.'t.on
|<uin
|;{ ,-,n
13^50
14.50
19.00
19.00
1
1
1
1
1
1
1
1
2i
1
1
1
1
1
2
2
2
1
A
15.00
17.50
19.00
20.00
22.00
2.1. 00
20.00
20.00
.44 "
.44
.44 Merwin
.44 Colt's. .
-.44 Long Ballard 22.00
-.44 Extra Long Wesson 30.00
-.44 " Ballard 30.00
-.44 Winchester 19.00
-.44 Colt's M. R. for Colt's Lightning Rifle. . 1 !.()(>
.44-40 Marlin 19.00
-.44 Evans' New Model 26.00
-.44 " Old " -J2.00
.44 Webley 16.50
.44 Bull Dog 1 4.50
-.45 Smith & Wesson 25.00
.4.-) Webley 20.00
-.45 Colt's U.S.A 22.00
.45 " " 28 Grs 22.00
.4.") " Round Ball 22.00
.450 Revolver 15.00
-.50 Pistol . . 28.00
SHOT CARTRIDGES, .38 W.C.F and .44 W.C.F 20.00
BLANKS, .32 Smith & Wesson 11.00
.38 " 13.50
We Stock all sizes and sorts of" Cartridges.
LOADED SHOT SHELLS
AMERICAN
12 GAUGE
10 GAUGE
Load No.
Weight of
Powder.
Weight of
Shot.
Size of
Shot.
Price per
1000.
Load No.
Weight of
Powder.
Weight of
Shot.
Size of
Shot.
Price per
1000.
100
3 Drs.
3
3
3
3X '
3X '
3X '
3X"
3X"
3X "
3#"
3^ "
3# "
3^ "
3#"
1 Oz.
1
\x
ix
1/8
1/8
1>8
1/s
1/8
IX
1/8
1/8
1/8
IX
ix
10
6
6
8
2
3
4
5
6
7
8
4
5
6
BB
S'25.00
25.00
26.00
26.00
28.50
26.50
26.50
26.50
2(5.50
26.50
26.50
27.00
27.01)
27.00
29.50
'40
4 Drs.
4
4
4
4
4
4X
4X
*x
4X
W
4^
y*
*X
l#0z.
1/8
1/8
tx
IX
ix
iX
IX
IX
iX
IX
1/8
1/8
iX
iX
10
4
6
7
6
8
4
5
6
7
8
2
3
6
8
$29.00
29.00
29.00
29 00
30.00
30.00
30.50
30.50
30.50
30.50
30.50
30.00
30-00
31.00
31.00
106
244
96
246
98
247
122
256
)23
258
124
>74
125
275
126
276
127
977
12S
278
134
gg2
135
283
136
^96
191
298
1
DOMINION TRAP, 12 GAUGE
DOMINION TRAP, 10 GAUGE
Load No. '
Weight of
Powder.
Weight of
Shot.
Size of
Shot.
Price per
1000.
Load No.
Weight of
Powder.
Weight of
Shot.
Size of
Shot.
Price per
1066.
D
3 Drs.
3 "
3 "
3 "
3 "
3 "
3X "
3/"
3X "
3X (<
3X"
3X "
3X "
3^ "
3^ "
sy 2 "
sy 2 "
3/'<
3^ "
iy*oz
ix
1/8
1/8
IX
iy&
iy*
1/8
1/8
1/8
i*
1/8
IX
1/8
I/
1#
IX
ix
IX
4
5
6
7
s
10
3
4
5
(i
7
8
10
3
4
5
6
8
10
$20.. 10
20.50
20.50
20.50
20.50
20.50
21.00
21.00
21.00
21.00
21.00
21.00
21.00
21.60
21.50
21 .10
21.50
21.50
21.50
o
4 Drs.
4
4
4
4
4
4X
*X
4X
4X
4X
4X
IX Oz.
iX
IX
iX
iX
IX
iX
iX
IX
iX
iX
iX
3
4
5
6
8
10
3
4
5
6
8
10
$23.50
23 . 50
23.50
23.50
23.50
23.50
24.00
24.00
24.00
24.00
24.00
24.00
D
D
D
o
D
o
D
o
G
L T
G
u
G
u
G
u
G
u
G
u
G
T
I
I
J
I
T
HAND LOADED SMOKELESS SHOT SHELLS
Loaded with C. & H. Amberite Powder.
12 GAUGE
10 GAUGE
Weight of
Powder.
Weight of
Shot.
Size of Shot.
Price per
KXO.
Weight of
Powder.
Weight of
Shot.
Size of Shot.
Price per
1000.
3 Drs.
IX Oz.
Any number
1 to 10
$47.75
3/ Drs.
I/ Oz.
Any number
1 to 10
$52.50
Price on application of any Special Loads.
SO
POWDER
SOLE AGENTS FOR CURTIS'S & HARVEY'S BLACK AND NITRO POWDERS
C. & H. Black Powder
F FF
5.65
FFF
5.95
25;ib. Kegs per keg, $5.30
C. & H. "Honker" Ducking Powder
Coarse or Medium Grain.
Pounds 25 12 }4 6^
Per Tin $12.50 6.50 3.30
C. & H. Celebrated "Diamond Grain
Nos 4
25 lb. Kegs per keg, $18.7")
.
1 Ib. Tins per doz.,
TP
9.40
1
0.55
6
is. 7.-)
10. 15
11. 2f>
Hamilton Blasting Powder
25 lb. Kegs per keg, $2.50
C. & H. Amberite Smokeless Powder
Tins X ! 5 lb -
Per lb $2.20 2.05 2.00
Amberite Smokeless Powder contains no Nitro-Glycerine,
gives a high muzzle velocity with low pressure, and is quick
in ignition. It is a hard, clean grain, and practically unaf-
fected by cold, heat or moisture. It is a safe and pleasant
powder to shoot with, and loads measure for measure with
Black Powder.
Savage Smokeless Powder
No. 1 For High Presssure Savage Cartridges
2 " . For Miniature " "
In Tins (about 1 lb) per tin, $1.85
Dynamite
30% 40% 50% 60% 75%
Price on application.
Detonators per 1000, $11.25
SHOT
Soft Shot, Dust to No. 3A ____ ...................................................................... per
" 4A, S, SG, and SSG (Buck Shot) ......................................... ................ "
Chilled Shot, Dust to No. 3A .......................................................................... "
Approximate Number of Pellets to the Ounce.
Dust.'or No. 12 10 9 8 7 6 5 4 3 2 1 B BB BBB A AA AAA AAAA SS
982 882 560 375 278 2u! liiii 121 98 92 69 58 49 44 3S 32 27 24 15
lb., $0.06
0.07
0.06^
SG SSG
11 10
90
REVOLVERS
IVER JOHNSON SAFETY HAMMER AUTOMATIC REVOLVERS
.32 Calibre, 3-inch Barrels, Nickel each,l$5.50
.32 3
.32 6
.38
.38
.38 6^
IVER JOHNSON SAFETY HAMMERLESS AUTOMATIC REVOLVERS
Blued
615
Nickel
7.35
Nickel
5.50
Blued
6.15
Nickel ..
7.35
.32 Calibre, 3-inch Barrels, Nickel each, $6.75
.32
.32
.38
.38
.38
3
6
8i
Blued
Nickel
N ickel
Blued
Nickel
We have a large assortment of Revolvers.
91
7.35
8.60
6.75
7.35
8.60
RIFLES
KING" AIR RIFLES
King " Repeater, Varnished Wood Stock ; holds 150 BB Sh
Single Shot, " " f" shoots BB Shot
*
MITED M
REMINGTON SPORTING AND TARGET RIFLES
.per doz., $14.30
12.00
No. 4 Remington, Walnut Stock and Fore-Ann, Rifle Butt, Octagon Steel Blue
Barrels, 22)^ in., .22 Calibre. This Rifle is very accurate, each, $vt.30
" 4 .32 Calibre, same as .22, only 24-inch Barrel... .' " 9.30
WINCHESTER REPEATING RIFLES
SPORTING RIFLE, MODEL 1892
.32, .38 and .44 Calibre.
24-inch Round Barrel, Full Magazine, PlainTrigger, Weight about (> V Ibs., Number of Shots, 15 each, $18.00
24 " Octagon " " " " " " " C,^ " " " 15 " 19.50
SPORTING RIFLE, MODEL 1894
26-inch Round Barrel, Full Magazine. JO Shots, Weight 7^ 'h s -> -32 - 40 and .38 - 55 Calibre each, $18.00
26 " Octagon "
10
19.50
SPORTING RIFLE, MODEL 1886
.45 - 70, .45 - 90, .40 - 70, .40 -82, .40 - 65, and .38 - 56 Calibre.
26-inch Round Barrel each, $19.50 2<i-im-h Octagon Barrel each, $21.00
SAVAGE HAMMERLESS SPORTING RIFLES
,^' .303 CALIBRE, FOR SMOKELESS POWDER
26-inch Round Barrel, holds 6 Cartridges, Weight I}/*, Ibs each, $25.00
26 " Half Octagon Barrel, holds 6 Cartridges, Weight, 7 \ s Ibs " 26.50
26 " Full " " " 6 " " 7 ; 4 " " 26.50
Can also supply Carbine same make as this Rifle.
We can supply any Style or Make of Rifle
'.12
DOUBLE BARREL BREECH LOADING GUNS
r GENUINE BAR LOCKS, EXTENSION RIBS
1 V*^ i T M I T F r\ ^~J I- J >
No. C Fine Imitation Twist, Rebounding Locks, Pistol Grip, Checkered Butt, 12 Bore each, $12.75
C 10 " " 13.25
" D Imitation Boston Damascus, Rebounding Locks, Pistol Grip, Checkered Butt, Double
Bolt, Matted Rib, 12 Bore " 14.25
" D Imitation Boston Damascus, Rebounding Locks, Pistol Grip, Checkered Butt, Double
Bolt, Matted Rib, 10 Bore " 15.00
" J Genuine Twist, Rebounding Locks, Deeley & Edge Fore End, Matted Rib, Fine
Engraving, Full Pistol Grip with Plate, Extra Fine Polished Barrels, Left Barrel
Choked, 12 and 16 Bore " 17.25
J The same, 10 Bore " 18.00
No. E Imitation Fine Damascus, Full Pistol Grip with Shield, Greener Bolt, Deeley & Edge
Fore End, Matted Rib, 12 Bore each, $17.75
" L Boston Damascus Barrels, Best Quality Bar Lock, Rubber Butt, Rebounding Lock,
Pistol Grip, Greener Bolt, 12 Bore
" L The same, 10 Bore " 26.00
We have in stock a number of high-grade Guns.
93
BREECH LOADING GUNS
, 1%'ore ...... l-MITE ........... .SJ.f...l., ............... ..each, $6.00
Zulu Single Breech Loadi
REMINGTON SINGLE BREECH LOADING GUNS
No. 3 Top Lever, Blued Steel Barrel, Rebounding Lock, Side-Cocking Lever, Pistol Grip, Choke
Bore, 12 or 16 Bore each, $13.25
BREECH LOADING DOUBLE BARREL GUNS
TOP SNAP ACTION
No. A Fine Imitation Twist, Rebounding Locks, Pistol Grip, Checkered, 12 Bore... each, $11.00
" B " Matted Rib, Engraved, 12 and 16 Bore, " 11.50
We keep all kinds of Guns and Rifles
INDEX
Adjusters, Chain 3, 12
Adjustable Handle Bars 20
Air Compressor Valve 43
Anvils 78
Axles 3
Dies, Screw Cutting .... 69, 70
Dog- Collars 87
Drills 72, 77
Dynamite 90
Dumb-bells 85
Baby Carriers 39
Bags, School 39
Tool 38
Ball Heads 2, 10
Balls, Cricket 83
" Steel 24
Base Balls 82
" Ball Mitts 83
Bats 82, 83
Bells
Bellows
Bent Bars
Bicycle Stands
Bicyclene _. . f . . . . \ .*. . . . 77. . . 61
Bolts 'V^kl-V 3i i, 13, 26, 35
Boracic Acid ^Y 68
Borax 68
Braces, Mud and Chain Guard 25
Brackets 2, 7, 8, 9, 10
Bracket Cups and Fittings 3, 7
Brakes 21, 27
Brazers 68
Brazing Graphite .... 68
Brushes 43, 49, 67, 68
Buffers, Handle Bar 22
Buffing Wheels 71
B. S. A. Sundries 2,3
c
Calipers 73
Canvas, Repair 66
Carbide 57
Carriers, Parcel 39
Cartridges 88, 89
Casing Tools 66
Cement 61
" Kettles 66
Centre Gauges 75
" Punches yb
" Reamers 72
Chains and Parts 26
Chain Adjusters 3, 12
" Brushes 43
' ' Guards :>.. 23, 24
" Guard Irons ./, . ^^\ 25
Chasers w . . | . . . .J .^^ . _ 70
Chucks
Clamps, Ball Head A ^ . 1. 3,
" ' Saddle .> T . 3*
Clubs, Indian . ; 85
Clusters 13
Coasters 27, 59
Cones 3, 7, 10, 15, -,5
Connections, Pump . 42
Cotter Pins -3, 16
Countersinks 72
Crank Axle Fittings <
" Hangers 2 or 3
Cranks 3, 9, 16, 19, 35
Cricket Bats 83
Crown Tips 1 1
Crowns 11,19
Cups 3, 7, 10, 15, 35
Cycle Enamel 67
Cyclist's Knife ... 41
Cyclometers ^7
Detonators 90
Dividers 73
Emergency Bands 61
Emery Powder and Cloth 71
Emery Wheels 71
Emery Wheel Dresser 71
Enamel Brushes 67
Enameling Oven 67
Enamel 67
Expanders 19
F
Figures, Steel Marking 76
Sules .Y> 71
File Cleaners . . ^"1* 71
Fishing Tackle
, Ball
Machined
Pressed Steel . . ,
Sets
Forges
79,
6, 10, n, 12, 13
3,
80
3
2,3
14, 15
4,5,6
78
Forgings 1 1 , 17
Foot Pumps 42, 43
Fork Crowns 1 1
" Crown Tips 1 1
" Ends, Rear 2, 14, 17
" End Screws 3
" End Tips 18
Forks ii, 18
G
Gasoline Brazer 68
Gas Lamps 56, 57
Gauges 75
Gear and Gear Table 3 1 , 63
Gloves, Boxing and Striking Bags 86
Golf Sticks and Balls 84
Graphite 49, 68
Grips, Cork, Leather or Rubber 22
' ' Spoke 46
Guards, Mud 23, 41
" Dress 25
' ' Trouser 47
Guns 93, 94
H
Hack Saws 71
Hammers ^^ 78
Hammocks . . .^. A . !V . ^ 85
Hand Dri'.br-?v. ^%A . .> 77
Punfps .1. Y .~ 42, 43
Hindle BaVs.X. .T 20,21
Bar Clamps 3
" " Buffers 22
" " Expanders 20
" Stems 12
" Tees ' 12
Hangers 2, 7, 8, 9, 10
Hard Tire Cement 61
Head Fittings 3. '
" Stems 19
" Lugs 3> I2
Heads 2, 6, 10
Holders, Bicycle 60
Hooks, Fish ' 80
Hub Sprockets . . 3
" Steps 3
Hubs 2, 27, 28, 29, 30
Inner Tubes 63
K
Kits, Repair 3 8
Knives | 6 5
L PAGE
Lacing- 25
" Loops '. 25
Lacrosse Sticks 84
Lamps and Oil 56, 57, 58
Lamp Brackets 3, 59
Lathe Dogs 76
Lawn Tennis Balls 84
" " Rackets 84
Leather Grips 22
Lever Pumps 43
Letters, Steel Marking- 76
Liquid Tire Cement 61
Locks , 40, 4 1
Locking Pins 3
Lock Nuts 3, 7, 10
Lubricant 49
Luggage Carriers 39
Lugs 2, 3, 6, n, 13, 17
M
Machine Screws 15
Machined Fittings 2,3,16
Metal Polish ..^ 1 49
" Shears ..^ ^^ \,'L-* 7^
Micrometer Gauge i''I^"Y'.k ^"?. . . 75
Mud Guards ^.Vk^.^ 231 46 M
" Guard Irons O.X.X 25
Nipple Washers
Screwdriver 44,
" Wrenches
Nipples
" Pump
Nuts f 3, 10, 15,
O
Odometer
Oil Cups 3,
" Cycle . .
" Lamps
" Hole Covers
Oilers 48,
Ovens, Enameling
P
Pads
Pant Clips. . .
Parcel Carrier
Patch Rubber
Patches, Vulcanizing
Pedals and Parts 2, 3, 32, 33, 34,
Pin-Hole Spanners
Pitching Shot
Plugs
Plugging Cement
Pliers 64, 73,
Powder
Pressed Steel Fittings
Protector, Inflated Body
Pump Clips
" " Tubing
Pumps '. * . \~jJ. .k2\
Punches 65,
Quoits
Reamers
Rear Fork Ends 2,
" Forks
' ' Stay Tips
" Stays
Reels
Reinforcements 13,
Repair Kits
Revolvers
Rim Countersink and Drill
Rims, Wood ,
Rifles
Rivets
Rods, Fishing
Rubber Mud Guards
' ' Pedals 2,
PAGE
Rubber, Repair .................................. 61
Solution ................................ 6j
Rules, Steel ..................................... 75
Rust, Remove ............................ ..... 40
Saddles
s
37
Saddle Clamps .................................. 38
Saws, Hack ................................. yj
Screw Plates ................ . .................. 69
" Driver ................................... 44, 46
Screws, Crank End ........................... 3, '5
Pitch Gauges .......................... 75
Seat Post Lugs .......................... 2, 6, 13, 17
" " Tees .................................. 12
" Posts ...................................... JQ
Sets Fittings .................................. 3, 4, 5, 6
Shot ......................... ................. go
Sides, Chain ................................... 26
Soapstone .................................... 66
Solution ........................................ 6 1
Speed Indicatoi - -,
^Jpeltecf? ............... . ....................... 68
SpidefcT. ..... r> ............................... 17
Spokes^V ..... V /r>. ......................... 26
Spoke Grips Vv/. (/* ...................... 46
Sprocket Guards . .V^XVI. Jt .................. ... 24
" Wheels ..... . .!/ ................... 3,16,17
Stands, Bicycle .................................... 60
Stay Tips ...................................... .2, 14
Stays, Rear ...................................... 1 8
Steel Balls ........................................ 24
" Wire Brushes ............. . ... ................ 68
' ' Wool ...................................... 71
Steering Tubes ................................... 19
Stems, Valve ..................................... 62
Striking Bags .................................... 86
Struts .......................................... 12
Suckers, Pump ................................. 43
Sulky Hubs ............... .................... 27
" Rims ............... .......... ..... ...... 23
T
Tandem Rims ...... . .......................... 23
" Hangers ............................... 9
Taps and Dies ..... . .............. .......... 69, 70
Thermometers ................................. 67
Thimbles .................................... 14
Tire Brushes ...................................... 43
' ' Lacing ...................... ............. 64
" Tape ....................................... 64
Tires ........................................... 63
Toe Clips and Trippers .................... 52, 53, 54, 55
Tool Bags . ........ .............................. 38
Tongs, Blacksmith ................................ 78
Torch, Enameling Oven ..................... ..... 67
Trimmers ...................................... . 65
Trolling Baits ...................... , ............ 81
Trouser Guards ............................... 47
Truing Stawd .................................. 46
Tread Bands .................................... 63
Tube Horn .................................... 66
" Vice .............. ......................... 77
Tubing .......................................... 19
V
Varnish ........................................ 67
Valve, Tubing .................................... 62
Valves and Parts ............ .................... 62
Valve Pliers .................................. 64
Vises ........................................ 74-77
Vulcanizers and Supplies . ........................ 66
W
Washers ............................ 3, 7, 10, 15, 26, 35
Whistles ........................................ S 2
Wire Gauges ...................................... 75
Wood Handle-Bars ............................. 21
" Mud Guards ............................... 23
" Rims .................................... 23
" Rim Washers ............................ 26
Wrenches ............................... 44, 45, 46, 78
96
u.
LU
CO
D
O
X
TOOLS
c
r
o
m
CO
Ml
X
7)
O
m
CUTLERY
Live Music Archive
Librivox Free Audio
Metropolitan Museum
Cleveland Museum of Art
Internet Arcade
Console Living Room
Books to Borrow
Open Library
TV News
Understanding 9/11