(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Biodiversity Heritage Library | Children's Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
Upload
See other formats

Full text of "Catalogue"

Ultjr (£ammmtroraltl| of iMaaaarljUBPttB 



NEW BEDFORD TEXTILE 

SCHOOL 



CA T A LOG U E 



1937 



1938 




NEW BEDFORD, MASSACHUSETTS 

1171-1219 PURCHASE STREET 



THE BOARD OF TRUSTEES 

OFFICERS OF THE BOARD 

JOHN A. SHEA, President. 
LOUIS A. CORDEIRO, Clerk. 

TRUSTEES 

Ex officio, His Honor LEO E. J. CARNEY, Mayor. 

Ex officio, JAMES G. REARDON, Commissioner of Education. 

Ex officio, ALLEN P. KEITH, Superintendent of Schools. 

Term expires June 30, 1937 
JOHN J. BARNES, Fairhaven. General Superintendent, Richard Borden Mfg. 

Co., Fall River. 
Hon. SAMUEL ROSS, Secretary, Mule Spinners' Union, New Bedford. 
JOHN A. SHEA, Taunton. Supt. of Rayon Dept., Mt, Hope Finishing Co., 

North Dighton. 
ELTON S. WILDE, President, Union Street Railway Co., New Bedford. 

Term expires June 30, 1938 
LOUIS A. CORDEIRO, Mortician, 71 Briggs St., New Bedford. 
ADELARD J. LACHAPELLE, Designer, Neild Mfg. Co., New Bedford. 
JOSEPH N. FINNI, D.M.D., 644 Kempton St., New Bedford. 
EMIL F. SUCHNICKI, M.D., 494 Brock Ave., New Bedford. 
JOHN N. O'BRIEN, Mattress Manufacturer, Comfortress Co., New Bedford. 

Term expires June 30, 1939 
WILLIAM E. G. BATTY, Secretary and Treasurer of Loom Fixers' Union, New 

Bedford. 
JOHN L. COHOLAN, Overseer in Cloth Room, Taber Mill, New Bedford. 
FRANK F. DUTRA, Second Hand, Goodvear Fabric Corporation, New Bedford. 
HERBERT A. LINDBERG, Assistant Designer, Taber Mill, New Bedford. 
MANUEL SILVA, Secretary-Treasurer, Ring Twisters', Yarn Finishers' and 

Web Drawers' Union, New Bedford. 

ADMINISTRATION AND INSTRUCTION 

ADMINISTRATION 

John A. Shea, President. 

George Walker, Principal. 

Maud L. Clark, Senior Bookkeeper. 

Ellen Broadmeadow, Senior Clerk and Stenographer. 

Mona C. Kennedy, Junior Clerk. 

INSTRUCTION 

Heads of Departments 

Thomas H. Gourley, Carding and Spinning. 

Fred Beardsworth, Warp Preparation and Weaving. 

Samuel Holt, Designing. 

John L. Fawcett, Rayon and Knitting. 

Fred E. Busby, S.B., Chemistry , Dyeing and Finishing. 

Morris H. Crompton, Engineering and Mechanical Drafting. 



Instructors 

Edward L. Murphy, Jr., General. 
Malcolm H. Richardson, General. 
Fred Beardsworth, Weaving and Designing. 
John E. Foster, B.S. in C.E., Mechanical Department. 
Adam Bayreuther, Machine Shop. 
Abram Brooks, Frank L. D. Weymouth, A.B., Chemistry, Dyeing and Finishing. 



The Principal and Heads of Departments constitute the faculty of the school. 
The day instructors serve both day and evening. 



Frank F. Dutra 
Paul Gay 



Assistant Evening Instructors 

Carding and Spinning 

Isaiah Hadfield 
James Nisbet, Jr. 



Warp Preparation and 

Francisco d'O. Abreu 
Christopher Cheetham 
Eugene Brightman 
John E. Cosgrove 
Herbert Crosby 
Omer Dumas 
Ernest J. Gagne 
Hilda M. Ken worthy 
Ernest Lamb, Jr. 
Albert Leach 
William Leach 
Herbert A. Lindberg 
John A. Mellor 
Isabel C. Murphy 



Weaving 

Joseph E. Pageotte 
Thomas Pilkington 
Joseph Plouffe 
James Plummer 
Frank Preston 
Charles Ridenti 
Antone Rodil 
Albert N. Rush worth 
Rhodes Smith 
Frederick D. Walton 
Arthur B. Wilkinson 
Samuel Woodruff 
Edward W^unschel 



Cost Finding 
Arnold Demoranville 



Henry G. Carse 



Rayon 



Mary Costa 



Mechanical Drawing 
Henry C. Nelson 

Machine Shop Practice 
Arthur F. Colwell, Jr. Ralph L. Lynam 

Louis Culver Byron M. Pardee 



Operation 

Charles 0. Redfield, Engineer. 

Harold Collins, Ernest L. Barber, Steam Firemen. 

Sidney McMullen, Fireman-Janitor. 

Walter J. Gauthier, James F. Loftus, George Wood, Janitors. 



CALENDAR 



June 2, Wednesday, 9 a.m. 
September 8, Wednesday, 9 a.m. 
September 13, Monday, 8.30 a.m. 
October 4—8, Monday — Friday 
October 12, Tuesday 
November 11, Thursday 
November 24, Wednesday, 12 m. 
November 29, Monday, 8.30 am. 
December 17, Friday, 4 p.m. 



Day Classes 
1937 

First entrance examination. 
Second entrance examination. 
First semester begins. 
Class elections. 
Columbus Day — Holiday. 
Armistice Day — Holiday. 
Thanksgiving recess begins. 
Thanksgiving recess ends. 
Christmas recess begins. 



1938 



January 3, Monday, 8.30 a.m. 

January 24, Monday, 8.30 a.m. 

January 27, Thursday, 4 p.m. 

January 31, Monday, 8.30 a.m. 

February 22, Tuesday 

March 25, Friday, 4 p.m. 

April 4, Monday, 8.30 a.m. 

April 15, Friday 

April 19, Tuesday 

May 30, Monday 

May 31-June 6, Tuesday — Monday 

June 6-10, Monday — Friday 

June 8, Wednesday, 9 a.m. 

June 10, Friday, 8 p.m. 



Christmas recess ends. 
Mid-year examinations begin. 
Mid-year examinations end. 
Second semester begins. 
Washington's Birthday — Holiday. 
Spring recess begins. 
Spring recess ends. 
Good Friday — Holiday. 
Patriots' Day — Holiday. 
Memorial Day — Holiday. 
Final examinations, senior class. 
Final examinations. Other classes. 
Entrance examinations. 
Graduation exercises, school hall. 



Evening Classes 
1937 



September 24, Friday, 7.30-9.00 p.m. 
September 27, Monday, 7.30 p.m. 
October 12, Tuesday 
November 11, Thursday 
November 25-26, Thursday — Friday 
December 13-17, Monday — Friday 
December 17, Fridav 



January 3, Monday, 7.15-9 p.m. 
January 3, Monday, 7.30 p.m. 
February 22, Tuesday 
March 25, Friday, 9.15 p.m. 
June 10, Friday, 8 p.m. 



Enrollment. 
First term begins. 
Columbus Day — Holiday. 
Armistice Day — Holiday. 
Thanksgiving recess. 
Examinations. 
First term ends. 



1938 



Enrollment, second term. 
Second term begins. 
Washington's Birthday — Holiday. 
Second term ends. 
Graduation exercises, school hall. 



NEW BEDFORD TEXTILE SCHOOL 

THE SCHOOL AND ITS PURPOSES 

The Legislature of the Commonwealth of Massachusetts, in the act under which 
the Trustees of the New Bedford Textile School were incorporated, gives as the 
purpose of the incorporation that of establishing and maintaining a textile school 
for instruction in the theory and practical art of textiles and kindred branches of 
industry. 

As New Bedford is primarily a cotton manufacturing city, this school confines 
itself principally to instruction in the cotton branch of the textile industry, and 
seeks to perfect itself in this line. Its course of instruction is arranged to subserve 



the interests of two general classes of students: (1) day students, — those who give 
their whole time for two or three years to acquiring the theory as well as the prac- 
tice of cotton manufacturing in all its details from the raw cotton to the finished 
fabric, and also have instruction in the scientific principles which underlie the 
construction of the machinery and its operation, and the artistic principles which 
are involved in the production of desirable and ornamental fabrics; (2) evening 
students, — those who are employed in the mills during the day and who, by 
attending the Textile School evenings, are able to learn other phases of the industry 
from that in which they are employed, or to perfect themselves in their special 
lines of work, and become more efficient workmen. The courses of instruction 
for these two classes of students are given fully on other pages of this catalogue. 

The whole of the machinery in the school is modern, being constructed especially 
for the school. It is all high grade, has latest improvements, and is especially 
built to afford facilities for all kinds of experimental work, and represents all the 
leading types of machines from the best builders in the United States, and several 
English builders. 

There is no mill in which there is so large a variety of machinery as in the New 
Bedford Textile School. This consequently affords the student a better oppor- 
tunity to become acquainted with various machines and methods than could be 
found in any one manufacturing establishment. 

Each instructor in the day school is a man who is thoroughly conversant with 
the work of the department under his charge by thorough training and long ex- 
perience. Each one has charge of the work in his department at night also, 
assisted by experienced assistants from the mills, many of whom are graduates of 
this school. 

The school went into operation in the fall of 1899, and the first class was gradu- 
ated in 1900. The regular courses were one year in length for the first few years, 
but were afterwards increased to three years. Special shorter courses are given, 
however, for which certificates are granted. 

For nineteen years the school was a semi-private institution, but supported by 
appropriations made each year by the State and by the city of New Bedford. It 
was managed by a Board of Trustees, two appointed by the Governor of the Com- 
monwealth, two representing the city (the mayor and the superintendent of schools; 
ex officiis), and twenty organized under the general statute by which the school 
was founded, a perpetual body, with power to fill vacancies other than the four 
created for and representing the Commonwealth and city. 

On July 1, 1918, it became a State institution by an act amending the State 
Constitution. It is still maintained with appropriations made by the State and 
city. 

It is managed by a Board of Trustees consisting of eighteen members, the Com- 
missioner of Education, ex officio, fifteen appointed by the Governor of the Com- 
monwealth, and two, the Mayor and the Superintendent of Schools, ex officiis, 
representing the city. Most ol the trustees are men who either are or have been 
connected actively with the manufacture of cotton textiles. 

The number of individual students attending the school since its opening is 
15,395, the number graduated 4,732. Many evening students who attend regu- 
larly do not take the examinations, and therefore do not appear as graduates, 
though they may have a good record as students, especially in practice. This 
shrinking from examinations is natural, for many of them have little or no com- 
mand of English, or are not accustomed to examinations. 

A large number of those who do not appear as graduates, however, are benefited 
by the instruction given in the school, and have acquired a knowledge and skill 
that have enabled them to rise in the industry and improve their financial and 
social condition. 

THE LOCATION OF THE SCHOOL 

The school is situated in the center of the city of New Bedford, Mass., on the 
main car line of the city, which connects with the mill districts, and is readily acces- 
sible to mill operatives who attend the evening sessions of the school. It is near 
the residential part of the city, and is therefore conveniently situated for non- 
resident pupils who take up a temporary residence in the city. 



New Bedford is an especially suitable location for an institution of this character. 
It is the largest cotton manufacturing city of fine yarns and fancy woven fabrics 
and novelties in the country. Its spindles number 1,189,430; and looms, 25,870. 

High grade combed yarns are produced in New Bedford to a greater extent 
than in any other city, while the mills are engaged in the manufacture of fine 
shirtings, muslins, lawns, sateens, lenos, checks, piques, marquisettes and other 
fancy fabrics to an extent unknown elsewhere. New Bedford's great advantage 
in this respect can be attributed principally to the fact that her mills are nearly 
all of recent construction, with the most improved and up to date equipment. 
The environment of these mills is in itself a benefit to the students who select the 
New Bedford Textile School as the institution in which to learn the mill business, 
as they have opportunity to observe their construction and operation, and to find 
employment in them during the long summer vacations and upon finishing their 
course in the school. 

New Bedford is within short distance of Hopedale, Whitinsville, Hyde Park, 
Providence, Pawtucket, Woonsocket, Taunton and other large cotton machinery 
centers. It is one of the healthiest of the manufacturing cities in the United States. 
Picturesquely situated on the extreme south shore of Massachusetts, it enjoys one 
of the mildest winter climates in New England, and thus offers peculiar residential 
advantages for nonresident students. 

THE BUILDINGS 

The school is housed in two separate buildings connected by a tunnel in the 
basement and by covered bridges overhead. They are constructed of red brick 
with trimmings of Indiana sandstone. They are classified as the machinery build- 
ing and the recitation building. 

The first now comprises the original building, erected in 1898-99, and the first 
two additions erected in the years 1901-02 and 1905, respectively, and the latest 
addition 1922 and 1923. This building is 164 feet in length, with an average depth 
of 112 feet. It is three stories high, with basement under most of it, and contains 
a floor space of 59,600 square feet. In it are situated the administration offices, 
the power house and all the departments comprised in a cotton yarn and cotton 
cloth mill. In addition, it has two large thoroughly equipped rooms for instruc- 
tion in the art of knitting, both for hosiery and underwear, and a gymnasium. 

The recitation building was completed and occupied in the fall of 1911. It con- 
sists of a main building 108 by 93 feet 6 inches, three stories high, with a deep 
well-lighted basement under the whole of it, and contains 40,392 square feet of 
floor space. It also has an annex 68 feet 3 inches long by 19 feet 3 inches deep, one 
story high, with basement, and contains 2,634 square feet of floor space. This 
annex is used as an experimental laboratory and as a storeroom for chemical 
supplies. 

The main building, besides being equipped with recitation and lecture rooms of 
various sizes, has a thoroughly equipped chemical laboratory, dyeing and finishing 
rooms, engineering laboratories, a commodious machine shop, drafting rooms, a 
designing room especially fitted, an exhibition room, and an assembly hall that will 
seat 400 persons. 

Both structures are of the slow-burning mill construction type, approved by the 
leading fire insurance associations and mill engineers, while the general equipment 
of the plant is also illustrative of the best methods of lighting, heating, ventilating, 
humidifying and fire-protecting mills. Great attention has been paid to the plan- 
ning and arranging of these buildings for the school, to make them suitable for the 
purposes of imparting textile instruction, and in order that the machinery building 
should give an object lesson in cotton mill engineering. 

Power and light are purchased from the local electric power company, and the 
school supplies its own heat and the steam needed in its finishing plant. The fire 
protection was designed and installed by the General Fire Extinguisher Company 
of Providence, R. L, the well-known Grinnell Sprinkler being used. The American 
Moistening Company, the Bahnson Humidifier Company and the Parks-Cramer 
Company have installed complete humidifying apparatus. The whole equipment 
is approved by the Massachusetts State inspectors of public buildings. 



6 
DAY CLASSES 

The regular day diploma courses of the school are as follows: — 

General Cotton Manufacturing. 

Chemistry, Dyeing and Finishing. 

Designing. 

Carding and Spinning. 

Knit Goods Manufacturing. 

All the above courses are diploma courses, three years long, and are intended 
to qualify students to hold positions of responsibility in textile manufacturing and 
allied establishments. 

The advantages of these courses to qualify men to hold responsible positions in 
cotton mills, dyeing and finishing plants, commission houses, etc., are many. 

It is not expected that a young man going from this school will at once secure 
an executive position. It is expected, on the contrary, that he will begin in a more 
humble fashion, that with the knowledge acquired in the school and the experience 
gained in the mill itself he will be qualified to hold higher positions, and that his 
advancement will be much more rapid and his knowledge broader than one who 
has not had the school instruction and training. That such is the case is shown 
already by the positions now held by the graduates of the school. 

Many of them are occupying positions of trust and responsibility in the textile 
and allied industries as manufacturers, treasurers, agents, superintendents, assist- 
ant superintendents, designers in mills and commission houses, overseers, chemists 
and dyers, etc. Some have been called to good positions as designers directly 
from the school, and many who have attended the evening classes have so improved 
in skill and knowledge that they have advanced in position and earning power. 

That the work of the school is recognized by textile manufacturers and those 
engaged in allied industries is attested by the fact that applications are constant 
for men of the school — more than can be supplied. 

But this school does not agree to make successful men out of lazy, careless and 
indifferent boys, nor does it care for such boys as students. But for those who 
wish to learn, who are ready to work, who are willing to bide their time, it does 
offer an opportunity that will supply them with an honorable vocation, with many 
opportunities for advancement in the world, with good remuneration. 

In case a prospective student feels that no one of the diploma courses meets his 
particular needs, he is requested to communicate with the Principal, stating his 
wishes. Whenever possible, special courses will be given in the various depart- 
ments, for which certificates will be granted, stating the subjects taken and the 
time given to them. The limitations of these special courses will be determined in 
every case by the management. 



General Cotton Manufacturing Course (I) 



First Year 



First Term 
Pickers and Cards 101 (6 hrs.) 
Weaving 111 (6}4 hrs.) 
Cloth Analysis 121, 151 (3 hrs.) 
Designing 131 (iy hrs.) 
Hand Loom 161 {\y hrs.) 
Principles of Mechanics 171 (1 hr.) 
Mechanical Drawing 172 (%y hrs.) 
Slide Rule 170 (1 hr.) 
Chemistry 182 (7 hrs.) 
Yarn Calculations 121 {\y hrs.) 



Second Term 
Drawing Frames 



102 {<by 2 



Cards and 

hrs.) 

Weaving 112 (6>£ hrs.) 
Warp Preparation 122 (Sy hrs.) 
Designing 132 {\y hrs.) 
Cloth Analysis 152 (3 hrs.) 
Hand Loom 161 {\y hrs.) 
Mechanical Drawing 172 (Sy hrs.) 
Textile Chemistry and Dyeing 222 (6^ 

hrs.) 



Second Year 



First Term 
Roving and Spinning Frames 103 (8 

hrs.) 
Weaving 113 (3 hrs.) 
Designing 133 (3}4 hrs.) 
Cloth Analysis 153 (3>£ hrs.) 
Machine Drawing 173, 175 (2 hrs.) 
Machine-shop Practice 174 {S}4 hrs.) 
Steam Engineering 176 (1 hr.) 
Dyeing 223 (5 hrs.) 
Rayon Testing 297 (3 hrs.) 



Second Term 
Advanced Calculations and Cotton 

Yarn Preparation 104, 106 (5 hrs.) 
Cotton Sampling 107 (1^ hrs.) 
Weaving 114 (5 hrs.) 
Designing 134 (3 hrs.) 
Cloth Analysis 154 (3}4 hrs.) 
Machine-shop Practice 174 (3>£ hrs.) 
Machine Drawing 175 (2 hrs.) 
Steam Engineering 176 (1 hr.) 
Textile Chemistry 234 (6^ hrs.) 
Testing 295 (1# hrs.) 



Third Year 



First Term 
Combing and Twisting 103, 105 (10 hrs.) 
Weaving 115 (6 hrs.) 
Designing 135 (3>2 hrs.) 
Color 145 (2 hrs.) 
Cloth Analysis 155 (1>£ hrs.) 
Elementary Electricity 177 (2 hrs.) 
Knitting 294 (2 hrs.) 
Rayon Processing 296 (3 hrs.) 
Merchandising 108 (1 hr.) 
Economics 109 (1}4 hrs.) 



Second Term 
Carding and Spinning Thesis 106 (8 hrs.) 
Weaving 116, 117 (<dy 2 hrs.) 
Designing 136 (SH hrs.) 
Color 146 (2 hrs.) 
Cloth Analysis 156 (3 hrs.) 
Mill Engineering 178 (3 hrs.) 
Converting 235-260 (IK" hrs.) 
Rayon Processing 296 (2 hrs.) 
Merchandising 108 (IK" hrs.) 
Economics 109 (1}4 hrs.) 



General Cotton Manufacturing Course 

The course in cotton manufacturing is designed to give the student a thorough 
fundamental knowledge of the different processes entering into the construction of 
a piece of cloth from the raw staple to the finished product. 

During the first year the student takes up the study of yarn preparation, weav- 
ing, designing and cloth analysis. The study of mechanics, mechanical drawing 
and chemistry is also pursued the first year, the work in these subjects being 
designed especially for men who are to take up the cotton mill work. Instruction 
in yarn calculations, spooling, warping, and slashing is also offered during the first 
year. 

In the second and third years sufficient time is given to instruction in picking, 
carding and spinning, while the subjects of weaving, designing and analysis are 
continued. Practical work in the machine shop is entered upon the second year. 

Dyeing is begun the first year, the work being such as is of special interest to the 
student of cotton manufacturing. The student is also given instruction in steam 
engineering during the second year, while in the third year, work in elementary 
electricity and cotton mill construction is offered. Knitting and color are also 
given in the third year. Rayon is taken up in the second year and continued in 
the third year. 

The work in all subjects is so arranged that the student is taken gradually from 
the simpler to the more difficult problems. Much of the work in the last year is 
original, and the student is thrown on his own resources. 

The work in chemistry, dyeing, mechanics and shop practice is all arranged 
with special reference to the student of cotton manufacturing. 

This course is very thorough, and is always recommended to the student who is 
to make cotton cloth manufacturing his future work. 



8 



Designing Course (II) 



First Year 



First Term 
Pickers and Cards 101 (3 hrs.) 
Weaving 111 (6}4 hrs.) 
Cloth Analysis 121, 151 (3 hrs.) 
Designing 131 (4>^ hrs.) 
Hand Loom 161 (1}4 hrs.) 
Principles of Mechanics 171 (1 hr.) 
Slide Rule 170 (1 hr.) 
Mechanical Drawing 172 (3>£ hrs.) 
Yarn Calculations 121 {\y 2 hrs.) 
Chemistry 182 (7 hrs.) 



Second Term 
Drawing Frames 



102 (3# 



Cards and 

hrs.) 

Weaving 112 (6>^ hrs.) 
Warp Preparation 122 (3>£ hrs.) 
Designing 132 (4>^ hrs.) 
Cloth Analysis 152 (3 hrs.) 
Hand Loom 161 (1}4 hrs.) 
Mechanical Drawing 172 (3^ hrs.) 
Chemistry and Dyeing 222 {<oj4 hrs.) 



Second Year 



First Term 
Weaving 113, 114 (6>^ hrs,) 
Designing 133 (3}4 hrs.) 
Color 145 (2 hrs.) 
Cloth Analysis 153, 154 (8 hrs.) 
Rayon Testing 297 (3 hrs.) 
Machine Drawing 173, 175 (2 hrs.) 
Machine-shop Practice 174 (S}4 hrs.) 
Steam Engineering 176 (1 hr.) 
Dyeing 223 (3 hrs.) 



Second Term 
Advanced Calculations and Cotton 

Yarn Preparation 104, 106 (2 hrs.) 
Cotton Sampling 107 {1)4 hrs.) 
Weaving 115 (8 hrs.) 
Designing 134 (3 hrs.) 
Color 146 (2 hrs.) 
Cloth Analysis 155 (5 hrs.) 
Machine-shop Practice 174 (3}4 hrs.) 
Machine Drawing 175 (2 hrs.) 
Steam Engineering 176 (1 hr.) 
Textile Chemistry 222 (3 hrs.) 
Testing 295 (1# hrs.) 



Third Year 



First Term 
Roving and Spinning Frames 103 (3}4 

hrs.) 
Weaving 116 (6 hrs.) 
Jacquard Designing 135 (6>2 hrs.) 
Cloth Analvsis 156 (4>^ hrs.) 
Knitting 294 (2 hrs.) 
Color 146 (2 hrs.) 

Machine-shop Practice 174 (3^ hrs.) 
Elementary Electricity 177 (2 hrs.) 
Merchandising 108 (1 hr.) 
Economics 109 {lyi hrs.) 



Second Term 
Weaving 116 (6}4 hrs.) 
Cost Finding 179 (2 hrs.) 
Jacquard Designing 136 (8 hrs.) 
Cloth Analysis 156 (5 hrs.) 
Commission House Work 157 (2 hrs.) 
Styling 158 (1# hrs.) 
Converting 235 (iy£ hrs.) 
Mill Engineering 178 (3 hrs.) 
Merchandising 108 (1)4 hrs.) 
Economics 109 (1}4 hrs.) 



Designing Course 

Designing is a branch of textile manufacturing of sufficient importance to call 
for a separate diploma course, extending over three school years. Since the major 
subjects in this course are confined to designing, cloth analysis and weaving, the 
work is somewhat more intensive than in the general course. 

The student, during the first year, takes up the study of the plain loom, the more 
simple designs and the analysis of such fabrics as contain designs similar to those 
being studied in the designing lessons. 

Instruction the first year is also offered in the preparation of warps for the loom, 
while work in the mechanical department is entered upon the first year, and ex- 
tends through all three years of the course. 

Instruction in the mechanical department is considered essential to the student 
of designing, as many of the new fabrics brought out by designers from year to year 
are based as much upon the mechanism of the loom as upon pure design. 



9 

During the second year more advanced fabrics, such as double cloths, Bedford 
cords, piques and lenos, are studied, both in designing and analysis, while much of 
the work in the weave room consists of putting original designs into the looms and 
weaving a short length of each. 

Commencing with the first term of the second year, a practical course in color 
is offered the student, who is required to work out a series of color scales and apply 
them in coloring designs. 

In the second term of this year cotton sampling is introduced. 

The third year is largely devoted to the subject of Jacquard designing in both 
the designing and weaving departments. During this year the subject of commis- 
sion house work, as it applies to the styling and finishing of new fabrics, is dealt 
with, and the student is given a close insight into the requirements of this branch of 
designing. 

For the student who wishes to perfect himself in the subject of cloth designing, 
as applied to the cotton trade, this course will be found very complete. 



Chemistry, Dyeing and Finishing Course (III) 

First Year 



First Term 
Principles of Mechanics 171 (1 br.) 
Mechanical Drawing 172 (4>^ hrs.) 
General Chemistry 181 (12^ hrs.) 
Inorganic Preparations 183 (10 hrs.) 
Designing and Cloth Analysis 131 (3>^ 

hrs.) 
Slide Rule 170 (1 hr.) 



Second Term 
Mechanical Drawing 172 (3>£ hrs.) 
Machine-shop Practice 174 (3 hrs.) 
Qualitative Analysis 191, 192 (13 hrs.) 
Organic Chemistry 212 (6>2 hrs.) 
Textile Chemistry and Dyeing 222 
(6>£ hrs.) 



Second Year 



First Term 
Color 145 (2 hrs.) 
Machine Drawing 173, 175 (2 hrs.) 
Machine-shop Practice 174 (3 hrs.) 
Steam Engineering 176 (1 hr.) 
Quantitative Analysis 202 (11>£ hrs.) 
Organic Chemistry 213 (<6}4 hrs.) 
Dyeing 223 (6>^ hrs.) 



Second Term 
Color 146 (2 hrs.) 
Machine-shop Practice 174 (3 hrs.) 
Machine Drawing 175 (2 hrs.) 
Steam Engineering 176 (1 hr.) 
Dyeing 224 (10 hrs.) 
Textile Chemistry 233 (3 hrs.) 
Cotton Sampling 107 (2 hrs.) 
Cotton Manufacturing and Testing 230 

and 295 {l}4 hrs.) 
Quantitative Analysis 203 (8 hrs.) 



Third Year 



First Term 
Machine Shop 174 (3 hrs.) 
Elementary Electricity 177 (2 hrs.) 
Dyeing 225 (6>£ hrs.) 
Singeing 240 (1 hr.) 
Scouring 241 (2 hrs.) 
Bleaching 242 (1 hr.) 
Mercerizing 245 (1 hr.) 
Textile Chemistry 234 (10 hrs.) 
Merchandising 108 (1 hr.) 
Economics 109 {1}4 hrs.) , 
Microscopy 298 (3K hrs.) 



Second Term 
Drying 250 (3^ hrs.) 
Calendering 255 (2 hrs.) 
Putting up 260 (1 hr.) 
Thesis 269 (13 hrs.) 
Textile Chemistry 234 (6^ hrs.) 
Merchandising 108 {l}4 hrs.) 
Economics 109 (1>£ hrs.) 
Microscopy 298 (3K" hrs.) 



Chemistry, Dyeing and Finishing Course 

The object of this course is to give to the student a thorough knowledge of 
the chemistry of the textile processes involved in the manufacture of cotton cloth. 
To insure a perfect foundation, the first two years are devoted almost entirely to 



10 

chemical subjects and laboratory work. During this period the subjects of general 
chemistry, inorganic and organic, are taught, the preparation and properties of 
various chemicals and dyestuffs, the properties of the various fibers, and the color- 
ing of them. 

The third year is devoted almost entirely to the practical dyeing and finishing of 
cotton goods. The best current practice is followed, but the underlying principles 
are thoroughly taught in order that the student may understand the limitations 
and purpose of each process. 

The subjects of machine drawing, principles of mechanics, electricity and shop 
work are taught. These allied subjects are arranged with special reference to the 
major subjects, and are considered very important, as they give the student a first- 
hand knowledge of the construction of the various machines. 

The graduates of this course find employment with dyestuff makers and dealers, 
with manufacturers of chemicals used in dyeing, with bleacheries, dye houses and 
finishing works. 

It is desirable that students entering this course shall have successfully com- 
pleted a scientific course in high school or its equivalent. Any one, however, who 
can show by examination his ability to profit by the instruction given is admitted. 



Knit Goods Manufacturing Course (IV) 

First Year 



First Term 
Pickers and Cards 101 (6 hrs.) 
Principles of Mechanics 171 (1 hr.) 
Mechanical Drawing 172 (4>^ hrs.) 
Chemistrv 182 (7 hrs.) 
Knitting 271, 281 (12^ hrs.) 
Yarn Calculations 121 {l}4 hrs.) 



Second Term 
Cards and Draw Frames 102 (6>£ hrs.) 
Mechanical Drawing 172 (3}4 hrs.) 
Machine-shop Practice 174 (3 hrs.) 
Textile Chemistry and Dyeing 222 

(6J^ hrs.) 
Knitting 271, 281 (13 hrs.) 



Second Year 



First Term 
Roving and Spinning Frames 103 (8 

hrs.) 
Machine Drawing 173, 175 (2 hrs.) 
Machine-shop Practice 174 {S}4 hrs.) 
Steam Engineering 176 (1 hr.) 
Dyeing 223 (6 hrs.) 
Knitting 272, 282 (12 hrs.) 



Second Term 
Doubling and Drafting 104 (5 hrs.) 
Cotton Sampling 107 \\y 2 hrs.) 
Machine-shop Practice 174 (3>2 hrs.) 
Machine Drawing 175 (2 hrs.) 
Steam Engineering 176 (1 hr.) 
Textile Chemistry 234 6>4 hrs.) 
Knitting 273, 283 (llj^ hrs.) 
Testing 295 (1}4 hrs.) 



Third Year 



First Term 
Machine-shop Practice 174 (2>}4 hrs.) 
Elementary Electricity 177 (2 hrs.) 
Dyeing 226 (3)4 hrs.) 
Knitting 274, 284, 293 (19# hrs.) 
Color 146 (2 hrs.) 
Microscopy 298 (2 hrs.) 



Second Term 
Mill Engineering 178 (3 hrs.) 
Dyeing 226 (3^ hrs.) 
Knitting 274, 284, 293 (18 hrs.) 
Color 146 (2 hrs.) 
Microscopy 298 (6 hrs.) 



Knit Goods Manufacturing Course 

This course in manufacturing knit goods is adapted to the needs of those students, 
desiring a thorough knowledge of the knitting industry. 

The instruction given covers both the technical and practical parts of the business, 
including cost finding. 

During the first year the student takes up the winding and preparation of cotton, 
lisle, wool, worsted and silk yarns for use on hosiery machines; also the principle 
of circular latch-needle knitting, and the setting and adjusting of different makes 
of rib-leg and rib-top machines. 



11 

In the second and third year the time is given up to the study of the different 
knitting machines, knitting men's, ladies', children's and infants' hose and gar- 
ments; method of handling and keeping account of goods through the mill; cost of 
manufacturing from yarn to the box. 

Instruction is also given in cotton yarn preparation — yarn calculations, cotton 
sampling, mechanics, steam engineering, chemistry and dyeing, the work in these 
different subjects being arranged to meet the special needs of the student. 

The Knit Underwear Manufacturing Course (V) which was offered in previous 
years has been combined, since 1935, with the Knit Goods Manufacturing Course. 



Carding and Spinning Course (VI) 

First Year 



First Term 
Picking, Carding, Roving 300 (11>£ 

hrs.). 
Mechanical Drawing 172 (3 hrs.). 
Chemistry 182 (6^ hrs.). 
Knitting 301 (4^ hrs.). 
Yarn Calculations 121 (1}4 hrs.). 
Principles of Mechanics 171 (1 hr.). 
Slide Rule 170 (1 hr.). 
Designing and Cloth Analvsis 131 

(3# hrs.). 



Second Term 
Drawing, Spinning, Doubling and 

Drafting 302 (13}4 hrs.). 
Cloth Analysis 152 (3 hrs.). 
Machine-shop Practice 174 (3 hrs.). 
Mechanical Drawing 172 (3 hrs.). 
Textile Chemistry and Dyeing 222 (6# 

hrs.). 
Knitting 301 (3>£ hrs.). 



Second Year 



First Term 
and Twisting 



303, 304 (10 



Combing 

hrs.). 

Cloth Analvsis 153, 154 (3^ hrs.). 
Knitting 301 (3>£ hrs.). 
Ravon Processing 296 {3)4 hrs.). 
Dyeing 223 (6>^ hrs.). 
Machine Drawing 173-175 (2 hrs.). 
Machine-shop Practice 174 (3 hrs.). 
Steam Engineering 176 (1 hr.). 



Second Term 
Spinning, Twisting and Cotton Classing 

304 (9 hrs.). 
Cloth Analvsis 155 (3>£ hrs.). 
Knitting 301 (3>£ hrs.). 
Testing 295 (4 hrs.). 
Textile Chemistry 234 (6^ hrs.). 
Machine Drawing 175 (2 hrs.) . 
Machine-shop Practice 174 (3 hrs.). 
Steam Engineering 176 (1 hr.). 



Third Year 



First Term 
General Test Work and Roll Covering 

305 (19^ hrs.). 
Designing 131 {1}4 hrs.). 
Knitting 301 (3}4 hrs.). 
Rayon Processing 296 (3 hrs.). 
Elementary Electricity 177 (2 hrs.). 
Machine-shop Practice 174 (3 hrs.). 



Second Term 
Yarn Testing and Comber Reneedling 

306 (19# hrs.). 
Knitting 301 (6^ hrs.). 
Rayon Processing 296 (2 hrs.). 
Mill Engineering 178 (3 hrs.). 
Cost Finding 179 (iy 2 hrs.). 



Carding and Spinning Course 

The course in carding and spinning is designed to give the student a thorough 
knowledge of cotton yarn manufacture. . 

The larger part of the students' time is devoted to instruction on the different 
machines used in the preparation of cotton yarn. 

Instruction is also given in knitting, mechanics, steam engineering, chemistry 
and dyeing. Considerable time is given to knitting, as that industry is closely re- 
lated to cotton yarn manufacture. 

This course is recommended to those students who intend to become connected 
with cotton yarn mills or to become cotton yarn salesmen. 



12 



Testing and Fabric Analysis Course (VII) 
First Year 



First Term 
Cotton Yarn Preparation (3 hrs.). 
Cotton Yarn Testing (3 hrs.). 
Weaving (3)A hrs.). 
Yarn Calculations (1)4 hrs.). 
Rayon Testing (3 hrs.). 
Rayon Processing (3 hrs.). 
Cloth Analysis (7 hrs.). 
Designing (1)4 hrs.). 
Hand Loom (1)4 hrs.). 
Color (l^hrs.). 
Slide Rule (1 hr.). 
Microscopy (3 hrs.). 



Second Term 
Cotton Yarn Preparation (3)4 hrs.), 
Cotton Yarn Testing (3)4 hrs.). 
Cotton Sampling (2 hrs.). 
Weaving (3)4 hrs.). 
Cloth Analysis (3 hrs.). 
Designing (1)A hrs.). 
Hand Loom (1>^ hrs.). 
Textile Fabrics (3 hrs.). 
Color (1)4 hrs.). 
Rayon Testing (3 hrs.). 
Microscopy (6)4 hrs.). 



Second Year 



First Term 
Cotton Yarn Preparation (3)4 hrs.). 
Cotton Yarn Testing (3 hrs.). 
Weaving (3 hrs.) . 
Designing (3}4 hrs.). 
Cloth Analysis (3)4 hrs.). 
Jacquard Designing (3)4 hrs.). 
Rayon Testing (4 hrs.). 
Economics (1)4 hrs.). 
Merchandising (1 hr.). 
Microscopy (6 hrs.). 



Second Term 
Advanced Calculations and Figuring 

Costs (2 hrs.). 
Cotton Yarn Testing (5 hrs.). 
Weaving (3 hrs.). 
Designing (3 hrs.). 
Cloth Analysis (3}4 hrs.). 
Jacquard Designing (3)A hrs.) . 
Rayon Testing (3 hrs.). 
Economics (1)4 hrs.). 
Merchandising (1)A hrs.). 
Microscopy (3)4 hrs.). 
Styling (lj^hrs.). 
Knitting (1)4 hrs.). 

Testing and Fabric Analysis Course 

This course is designed for those who have had a high school education and wish 
to prepare themselves for testing or mill office work. It is arranged to give the 
student a knowledge of all the different processes in the manufacture of yarn and 
cloth and the finishing of the same. It covers all calculations required in laying 
out draft schedules, production costs, cloth construction and designing and all 
testing and research work required in cloth manufacture and finishing. 

This is a certificate course and can be completed in two years. 

Mechanical Course (IX) 

First Year 



First Term 
Shop Mathematics 169 (3 hrs.). 
Mechanical Drawing 172 (10 hrs.). 
Machine-shop Practice 174 (18)4 hrs.). 
Slide Rule 170 (1 hr.). 



Second Term 
Shop Mathematics 169 (3 hrs.). 
Mechanical Drawing 172 (9K" hrs.). 
Machine-shop Practice 174 (20 hrs.), 



Second Year 



First Term 
Steam Engineering 176 (3)4 hrs.). 
Elementary Electricity 177 (2 hrs.). 
Machine Drawing and Mechanism 175, 

173 (14 hrs.). 
Machine-shop Practice 174 (13 hrs.). 



Second Term 
Steam Engineering 176 (3)4 hrs.). 
Machine Drawing and Design 175 

hrs.). 

Elementary Electricity. 177 (3)4 hrs.). 
Machine-shop Practice 174 (15)4 hrs.). 



(10 



Mechanical Course 

The mechanical course is arranged for those students who have a natural leaning 
towards mechanical things. A practical knowledge of the mechanical side of a 
textile mill may be obtained by those attending this course. 




H 
P4 
< 

Ph 
Q 

O 

i — i 

Ph 

QQ 
O 

> 

o 
P4 

Q 
o 

I— I 

pq 
O 

o 

#3 
OQ 

<1 

O 

o 
> 



13 

During the first year all of the students spend the same amount of time in the 
various subjects, but during the second year the major part of the time can either 
be spent in the machine shop or the drafting room. 

A certificate course can be completed in two years, and, if the student so desires, 
he may specialize for another year either in the drafting room or the machine shop. 

This course will fit the students to enter engineering offices, drafting rooms, 
machine shops, planning departments of various machine builders and other lines 
of employment. 

Rayon Preparation Course (X) 

First Year 



First Term 
Rayon Processing 296 (3 hrs.). 
Rayon Testing 297 (3 hrs.). 
Cloth Analysis 151 (3 hrs.). 
Designing 131 (iy hrs.). 
Hand Loom 161 (iy hrs.). 
Weaving 112 {<6y hrs.). 
Yarn Calculations 121 (iy hrs.). 
Chemistry 182 (7 hrs.). 
Mechanical Drawing 170, 172 (3y hrs.). 
Principles of Mechanics 171 (1 hr.). 
Slide Rule 170 (1 hr.). 



Second Term 
Rayon Processing 296 (€>y hrs.). 
Cotton Warp, Preparation 122 (Sy 

hrs.). 
Cloth Analysis 152 (3 hrs.). 
Designing 132 (iy hrs.). 
Hand Loom 161 (iy hrs.). 
Weaving 112 (6y hrs.). 
Textile Chemistry and Dyeing 222 {<6y 

hrs.). 
Mechanical Drawing 172 (?>y hrs.). 



Second Year 



First Term 
Rayon Processing 296 (4>^ hrs.). 
Rayon Testing 297 (%y hrs.). 
Microscopy 298 (3y hrs.). 
Cloth Analysis 153 (3y hrs.). 
Designing 133 (3>^hrs.). 
Color 145 (2 hrs.). 
Weaving 113 (3 hrs.). 
Dyeing 223 (6 hrs.). 
Machine Drawing 173, 175 (2 hrs.). 
Steam Engineering 176 (1 hr.). 



Second Term 
Ravon Processing 296 (6y hrs.). 
Color 146 (l^hrs.). 
Microscopy 298 (Sy hrs.). 
Cloth Analysis 154 (Sy hrs.). 
Designing 134 (3 hrs.). 
Weaving 114 (5 hrs.). 
Textile Chemistry 234 (6>< hrs.), 
Machine Drawing 175 (2 hrs.). 
Steam Engineering 176 (1 hr.). 



Rayon Preparation Course 

This course is designed to give the student the fundamental knowledge of the 
different processes entering into the construction of cloth made of rayon yarns. 

During the first 3 r ear the student studies ra3*on processing from skein to warp 
and filling packages, rayon testing, weaving, designing and cloth analysis. The 
study of mechanics, mechanical drawing, slide rule, chemistry and yarn calcula- 
tions is also pursued in the first year. 

In the second year rayon processing, rayon testing, weaving, designing and cloth 
analysis are continued. Dyeing is started in the first year and continued in the 
second year. Color and microscopic work are taken up in the second year. 

This course is so arranged that the student will be qualified to enter any branch 
of the rayon textile business. 

This is a certificate course and can be completed in two years. 



REFERENCES FROM TABULATED COURSES 

101. Pickers and Cards 

Cotton yarn mill machinery. Lists of processes in cotton mills for different 
numbers of j'arn. Proper sequence of processes. 

Objects of blending cotton. Methods of mixing same. Bale breakers. 

Picker rooms. Automatic feeders. Construction of different varieties of 
feeders. Their capacity and suitability for the purpose intended. 



14 

The cotton opener, its use and object. Various styles of openers. Setting and 
adjustment of openers. Connection of feeders to openers. The various styles of 
trunks. Calculations in connection with openers. Breakers. Intermediate and 
finisher lappers. Different styles and makes of machines. Use and object of the 
lapper. Construction of aprons, beaters, bars, screens, fans, lap heads, evener and 
measuring motions, etc. The setting and adjustment of lappers. Calculations in 
connection with lappers. 

The revolving flat card. Its principal parts described, including feed, licker, 
cylinder, doffer, coiler, screens and flats. Different setting arrangements. Speeds 
of different parts. Top flat cards, roller and clearer, and other cotton cards. 
Clothing, grinding, setting and stripping cards. 

102. Cards and Drawing Frames 

Study of the card continued. 

The railwajr head as used either independently or combined with sections of 
cards. Single and double railway heads. Eveners, draft calculations, metallic 
and other rolls. 

Method of arranging and constructing drawing frames. The use and objects of 
the frame. Gearing, weighting, stop-motions, varieties of rolls, etc. 

103. Roving Frames, Spinning Frames and Twisters 

Slubbers. First and second intermediates. Roving or jack frames. The con- 
struction and use of the fly frame. Description and use of the different parts. 
Calculations in connection therewith. Changing and fixing frames, etc. 

The spinning frame. Its construction and use. Its principal parts, such as 
creels, rolls, rings, travelers, speeds, builder motions, etc. 

The objects of twisting. Wet and dry twisting. The direction and amount of 
twist in different ply and cord threads; different methods used in preparing yarn 
for twisting. Size of rings and travelers for different counts of yarn. Methods of 
winding, speeds and production. 

104. Doubling and Drafting 

Figuring the number of doublings and drafts from picker to spinning frame or 
mule. 

Calculations for schedules of machinery required for different counts and amounts. 
Cost and production of yarn. 

Practice work consists of carrying work through picker to spinning frames. 

105. Combers and Mules 

The sliver and ribbon lap machines. Construction of American and English 
machines. Methods of operating same. Setting and adjusting same, and calcu- 
lations in connection therewith. 

The cotton comber. The construction of the comber, its use and objects. 
Comber setting. Comber calculations. Operation and management of combers. 

The spinning mule and its uses. The special features of the mule. Descrip- 
tion of the head stock, the cam shaft, mule carriage and other parts. The con- 
struction and use of each part of the mule. Different movements in the mule and 
the timing of the same. The copping rail and the building of a cop. Faults in 
mule spinning and their correction. Mule calculations. 

106. Thesis 

Original work in laying out processes for different counts of yarn, and carrying 
the same through from raw cotton to finished yarn. Tests for different processes. 
Methods of testing from bale to finished fabrics. 



15 

107. Raw Cotton 

Raw cotton. Its varieties. The cultivation of cotton. The preparation of 
cotton for the market. Cotton ginning. Cotton as an article of commerce. The 
selection of cotton, its suitability for different purposes. 

108. Merchandising 

Products, trade marks, markets, distribution, broker, commission house, adver- 
tising, seasons, pricing, market analysis, business policies, price charts. 

109. Economics 

Problems in textile management, production, labor relations, social, accident 
and fire insurance, stabilization, business policies, depreciation and obsolescence, 
financial setup, balance sheets, taxes, tax returns. 

111. Plain Looms 

The construction of the plain loom. The principal movements in weaving. 
Methods of shedding. Shedding motions. Shedding by cams. Auxiliary shafts. 
Variety of cams. Construction of cams. Timing cams and effect on the cloth. 

Picking motions. Different methods of picking. Shuttles. Shuttle boxes. 
Shuttle guards. Protector motions. Reeds. Let-off motions. Take-up motions. 
Calculations in connection with take-up motions. 

Filling-stop motions. 

Temples. The various makes and their uses. 

The Draper loom. Special features of its construction. 

Automatic shuttle and bobbin changing looms. 

Special features of the various makes of looms including Crompton & Knowles, 
Whitin and Stafford looms. 

The management, operation and fixing of looms. Putting in warps. Faults and 
remedies in weaving and fixing. Calculations directly connected with plain looms. 

Looms adapted to weave twills and satins. 

Mechanical warp stop-motions. 

112. Fancies 

Looms adapted to weave fancy cloth with dobbies. Dobby construction, timing 
and setting for single and double index dobbies. Chain pegging for dobbies. 

Tying in and starting up warps for which the student has worked out some 
design. Timing and setting and practical work on 2 x 1 box looms. 

113. Box Looms 

Looms for the use of various colors of filling. Drop box motions. Box chain 
multipliers. Multiplier motions. Still box motion. 

114, 115. Special Loom Attachments 

Dobby looms combined with other motions for special purposes, such as looms 
adapted to weave lenos with cotton and wire doups and all modern equipment, 
checks, blankets, handkerchiefs, towels and other goods. 

Draper looms. Practical setting of the magazines, feeler and warp stop motions. 

Stafford and Automatic looms. Practical setting of the magazines, feeler and 
warp stop motions for shuttle changing and bobbin changing looms. 

Crompton & Knowles Automatic 4x1 Box looms. Practical setting of the 
magazine, multipliers and warp stop motions. 

116. Jacquards 

The principle of construction of Jacquard machines. Single and double lift 
machines. Jaquard machines for special purposes. Principles of harness tying. 
Practical work in cutting cards and weaving the student's own designs. 



16 
117. Dobby Automatic Looms 

Dobby automatic looms adapted to weaving ginghams, crepe effects and hand- 
kerchiefs. Special features of their construction. Practical work with modern 
wire doup lenos. 

Suggestions for the management of the weave room. 

121. Yarn Calculations 

Definitions. Calculations for finding length, weight or counts of single yarns, 
whether cotton, woolen, worsted, silk, etc. Ply yarns. 

122. Spoolers, Warpers and Slashers 

Various methods of preparing cotton warps. 

The spooler, its use and construction. Production per spindle. Spindle speeds. 
Builder motions. Thread guides. Different makes of spoolers. 

The operation and setting of the spooler. 

Warpers. The object of the warper. Its construction and operations. Speeds, 
settings, etc. Warpers with and without cone drive. Warper slow motions. 
Faults in warping and their correction. 

The slasher. Its use. Construction of the different parts of the slasher. 

Sizing or dressing yarns. Materials used. Methods of mixing same. Suitable 
materials for various purposes. 

Preparing the warp for the loom. The construction of reeds and harnesses. 

Variations from the above system for special purposes, such as used in gingham 
and other mills. 

131. Designing 

Definitions of the words and terms used in designing and analysis. Character- 
istics of the various classes of fabrics. Design paper and its application to design- 
ing and analysis. Cloth structure, with a study of the various sources from which 
the patterns of fabrics are obtained. Twills. Wave effects. Diamonds. Sateens. 
Granites. Checkerboards. Rearranged twills. Figured twills. 

132. Designing 

Designing for single fabrics continued, such as honeycombs. Mock and imita- 
tion lenos. Entwining twills. Spots weaves arranged in various orders. Cord 
weaves. Imitation welts. Elongated twills. Check effects. Corkscrew weaves. 
Four change system of designing. Damask weaves. 

133. Designing 

Designing for more complicated fabrics, such as figure fabrics, using extra ma- 
terials. Fabrics backed with extra material. Fabrics having the face and back of 
different material or pattern. Double plain fabrics. Reversible fabrics. Em- 
bossed effects, such as Bedford cords, piques, Marseilles weaves. 

134. Designing 

Designing for leno, pile and lappet fabrics, such as methods of obtaining leno 
patterns. Mechanical appliances for the production of lenos, yoke and jumper 
motions. Bottom doups. Top doups. Check lenos. Jacquard leno-effects. 
Weaving with wire doups. Weaving with the bead motion. Russian cords. 
Marquisettes. Full turn lenos. 

Pile fabrics, such as velveteens, corduroys, velvets, plushes, carpets, terry 
toweling. 

Lappet weaves. Description of the various lappet motions. Designing for 
original lappet effects. Reproduction of woven lappet patterns. Chain drafts, 
Locking motions. Spot effects. 



17 

135. Jacquard Designing 

Design paper. How to figure the design paper necessary to reproduce any 
Jacquard pattern. Defects of Jacquard patterns and how to avoid them. Trans- 
ferring designs to plain paper. Transferring sketches to design paper. Changing 
the sley of Jacquard fabrics. Method of casting out. Ground weaves. Rules 
for rinding sley, pick, warp and filling. Foundations upon which Jacquard pat- 
terns are based. 

136. Jacquard Designing 

Different methods of making designs. Sketching original designs by the differ- 
ent methods commonly used. Working out the sketches upon design paper. Cut- 
ting cards on the piano card-cutting machine. Card lacing. Weaving of at least 
one original design. Method of weaving Jacquard leno designs. Mechanisms re- 
quired in weaving Jacquard lenos. Making Jacquard leno designs. 

Harness tying. Various systems of tjdng Jacquard harnesses. Lay-over ties. 
Center ties. Compound ties. 

145. Color 

Theory of colors. Complementary colors. Hue, value and chroma scales 
Practical work in color scales. 

146. Color 

Munsell system of coloring. Color harmony, color effects. Analyzing color 
effects. Practical work in making sequences and in producing colored designs. 

151. Analysis 

Standard methods of representing harness and reed drafts. Harness drafts on 
design paper. Written harness drafts. Chain drafts. Layout plans. Finding 
weight of warp yarns, weight of filling yarns. Yards per pound of cloth. 

152. Analysis 

Finding counts of warp and filling by various methods. Finding yards per pound 
of cloth from a small sample by weighing. Making original designs and weaving 
them on the power loom. Reproduction of woven samples. 

153. Analysis 

Analyzing more difficult samples. Finding average counts. Percentage of each 
material. Production of loom. Price per yard for weaving. Weaving of more 
difficult original designs. 

154. Analysis 

Analysis of leno fabrics, making both written drafts and harness drafts on de- 
sign paper. Chain drafts. Weaving of original leno designs. Changing the con- 
struction of fabrics and preserving balance of structure. 

155. Analysis 

Analysis of more difficult samples continued. . Weaving of original samples. 
Work on changing over samples to different constructions. 

156. Analysis 

Continuation of the work outlined in 155. Weaving of students' original Jac* 
quard designs. Work on cost of manufacturing fabrics. 



18 
157. Commission House Work 

Study of common fabrics. Application of cloth analysis to the requirements of a 
converter or of a commission house. 

Methods of ascertaining counts of warp and filling; also sley and pick for new 
fabrics. 

Determining the cost of fabrics. 

158. Styling 

This is a continuation of analysis. Changing the construction of fabrics. Mak- 
ing sketches for alteration of fabrics. Finding cost of fabrics. 

159. Textile Fabrics 

A study of fabrics in common use, showing how they differ. A study of fabrics 
used for different purposes. 
A study of materials and yarns used in the construction of fabrics. 

161. Hand Loom 

The hand loom, its construction and use. Harness drafts as affecting the weave. 
Building harness chains. Practice on the hand loom in weaving fabrics from 
original and other designs, and putting into practice the designing lessons. 

169. Shop Mathematics 

Shop mathematics consists of a review of arithmetic for those who have only an 
elementary knowledge of mathematics and then branches out in the various stand- 
ard formulas and data that are necessary for every mechanical superintendent to 
know. It deals with shop, drafting room, steam and electrical trades. 

Various subjects such as trigonometry, logarithms, graphical charts, strength of 
materials, gearing and mechanisms, etc., are taken up in the class room. 

Textbook: "Industrial Mathematics," Farnsworth. 

170. Slide Rule 

Detail instruction is given in the class room on the use of the slide rule, so that 
the students may thoroughly learn how to operate and read the slide rule in order 
to solve all of the practical problems arising in their various classes. 

171. Mechanics 

The fundamental principles of mechanics and physics, with special reference to 
practical uses in textile machinery and to future application in the engineering 
courses, are given in a series of lectures. Practical problems illustrating these 
principles are worked out in the class room. A study is also made of the strength 
and nature of the different materials used in machine construction. 

Textbook: "Practical Mechanics," Hale. 

172. Mechanical Drawing 

The object of this course in mechanical drawing is to give the student a good 
foundation for reading drawings and for making such sketches and drawings as he 
will be likely to be called on to make in practice. Thoroughness, accuracy and 
neatness are insisted upon throughout the course. The work in mechanical draw- 
ing begins with instruction in the use and care of drawing instruments. The fol- 
lowing is a general outline of the work to be covered : plain lettering, geometrical 
constructions, orthographic and isometric projection, inking and tracing, stand- 
ards, conventions and tabulation as used in the modern drafting room. Simple 
working drawings are to be made to scale, and the final work of the year consists 
of free-hand sketching of machine details from parts of textile machinery. This 
brings into use at one time all the work covered during the year, and serves as a 
test of the student's grasp of the subject. 



19 
173. Mechanism 

In view of the large number of mechanisms used in textile machinery this course 
is a very important one. The subject is given by means of lectures and recitations, 
the work in the drawing room being closely related to the classroom instruction. 
This course includes studies and graphical solutions of cams, gears, etc. 

174. Machine Shop 

Shopwork and drawing are organized as one department for the purpose of se- 
curing close correlation of the work. Many exercises are common to the drawing 
room and the shop. In the machine shop an effort is made, not only to train the 
student manually, but also to teach him correct shop methods and practice. Care- 
fully graded exercises are arranged to teach him the use of measuring instruments, 
hand tools and then machine tools. The different measuring tools and devices, with 
advantages, methods of use and limits of accuracy of each, are considered. Each 
cutting tool is taken up, its cutting angles and general adjustments are described, 
together with the "feeds" and cutting speeds suitable for each material worked 
and for each machine. The course includes instruction in centering, squaring, 
straight and taper turning and fitting, outside and inside screw cutting, chucking, 
reaming, finishing and polishing, drilling, tapping, grinding, boring, planing flat 
and V surfaces, filing and gear cutting, including spur, bevel, rack and worm gears. 

When the student becomes proficient in handling the tools and machines, he is 
given work in fitting and assembling, and also repair work from other departments. 

175. Machine Drawing 

Machine drawing is a continuation of the mechanical drawing of the first year, 
and the work is dependent upon a thorough knowledge of how to apply the con- 
ventions of drawing which custom has made standard as given during the first year. 
The work consists of proportioning of machine details as fixed by practice, making 
assembly drawing from detailed sketches, and also detailing parts from assembled 
machines. 

176. Steam Engineering 

A typical power plant, including the boiler, steam engine and all necessary 
auxiliary apparatus such as is found in a modern cotton mill, is studied in detail. 
Prepared outlines are discussed in lecture periods, and the details supplied by the 
student after reading assignments in standard text and reference books. Practice 
is given in handling engines, apparatus and equipment in the laboratory. Exer- 
cises consist in adjusting, starting and running engines, taking and working out 
indicator cards, prony brake tests, pump and injector tests, etc. 

. 177. Elementary Electricity 

The elementary principles of magnetism and electricity are taken up in lecture 
and recitation, and are supplemented by laboratory exercises. Emphasis is placed 
on the different wiring systems and electric drives as used in mills and factories. 
A general study is made of a typical electrical power plant, and of the apparatus 
required to generate and distribute electrical energv. 

Textbook: "Essentials of Electricity," W. H. Timbie. 

178. Mill Engineering 

Proficiency in this course depends on the thoroughness with which the work of 
the previous courses was carried on. The course consists of lectures supplemented 
by work in the drafting room. Problems in design, construction and equipment of 
mills and factories are taken up. The subject includes foundations, walls, floors, 
roofs and mill construction in general. The choice of location and the methods of 
transmitting power are discussed. The following outline shows the scope of the 
course: principles underlying the design and construction of framed structures, in- 
volving the use of wood, steel, brick, stone, concrete and reinforced concrete, 
methods of lighting, ventilating and protecting from fire. 



20 
179. Figuring Costs 

Methods of cost finding in a cotton mill. A complete mill is taken for an illus- 
tration, and the reports of both the expense and production are used to work with. 

181. General Chemistry 

This course comprises three lectures of one hour each and nine and one-half 
hours of laboratory work each week. The laboratory work is closely criticized by 
the instructor, and individual effort encouraged. Careful manipulation, thorough- 
ness in observation, accuracy in arriving at conclusions and neatness are required 
of each student. The fundamental principles of the science are taught in connec- 
tion with the descriptive chemistry of the elements. 

No previous study of chemistry is required for admission to this course, but the 
instruction is so arranged that students having already spent considerable time in 
chemistry in other schools are given advanced work in which the knowledge al- 
ready acquired is utilized. 

Textbook: Smith's "College Chemistry." 

182. General Chemistry 

The training afforded by a course in general chemistry is considered of value to 
all the students of the school and also lays the foundation for the subsequent course 
in dyeing. Hence, students taking courses in the cotton or knitting departments 
are required to take general chemistry during the first term of the first year. This 
subject covers the same ground as subject 181, but in a briefer manner. Five hours 
per week are spent in the laboratory and one hour in the lecture and recitation 
room. 

Textbook: Smith's "Elementary Chemistry." 

183. Inorganic Preparations 

The time in this subject is devoted largely to laboratory work, with an occa- 
sional explanatory lecture. First the student is taught the best methods of carry- 
ing on the usual laboratory operations, as forming of crystals, precipitates, filtering, 
evaporating and drying. This is followed by the preparation of several salts and 
industrial products, substances being selected that are of particular interest to the 
textile industry. The work is progressive in subject-matter, and so arranged as to 
be co-ordinate with the subject of general chemistry. 

Textbook: Blanchard's "Synthetic Inorganic Chemistry." 

191-192. Qualitative Analysis 

This course comprises one lecture of one hour and twelve hours' laboratory work 
a week during the second term of the first year. The student is taught the prin- 
ciple of systematic qualitative analysis and the application of the principles to de- 
tect the base-forming elements, the acid-forming elements, and the various classes 
of compounds of the bases and the acids. Especial attention is paid to the inor- 
ganic materials ordinarily met with in the manufacture, dyeing and finishing of 
cotton piece goods. The student is required to analyze correctly a sufficient num- 
ber of unknown substances to demonstrate his ability to detect any of the elements 
ordinarily met with. 

Textbook: Noyes' "Qualitative Analysis." 

202. Quantitative Analysis 

The course in Quantitative Analysis is divided into two parts, each requiring one 
term for its completion. Stress is laid on the accuracy and integrity necessary for 
quantitative work. Each student is required, under supervision of the instructor, 
to adjust his own balances, and calibrate the weights, burettes, flasks, etc., that he 
uses, that he may understand the nature and amount of error in his work, thus 
giving him confidence in his results. In connection with the course a thorough 
training in the solution of chemical problems is given. The course comprises one 



21 

lecture each week, the remainder of the time being devoted to laboratory practice. 
The term is spent in volumetric analysis involving the use of acids, alkalis, oxidizing 
and reducing agents and chlorimetry. 
Textbook: Talbot's "Quantitative Analysis." 

203. Quantitative Analysis 

This course is a continuation of Course 202 and comprises gravimetric determi- 
nation of chlorine, sulfuric, carbonic and phosphoric acids, and iron, aluminum, 
calcium and magnesium. The work on chemical problems is also continued 
through this term, the problems being such as to apply the principles of gravi- 
metric analysis. 

Textbook: Talbot's "Quantitative Analysis." 

212. Organic Chemistry 

This course is divided into two terms, the first term giving a general survey of 
the subject, a thorough training being given in the reactions and properties of the 
various compounds met with in textile industries. The two lower members of the 
paraffines and their derivatives are exhaustively treated. Then the study of the 
higher members is taken up, the unsaturated hydro-carbons and their Terivatives. 

Textbook: Conant's "Organic Chemistry." 

213. Organic Chemistry 

The work of the second term is devoted exclusively to the study of dyestuffs and 
their preparation. The constitutions of various typical dyestuffs are studied to 
determine their influence on coloring power, dyeing properties and fastness to light, 
acids, alkalis, bleaching, etc. In the limited time afforded, the number of dye- 
stuffs studied is necessarily limited, but the training is made so thorough that the 
student is enabled to take up further investigation intelligently should his future 
work demand it. 

222. Textile Chemistry and Dyeing 

These subjects open with a study of the chemical and physical technology of the 
fibres. Lectures are given descriptive of the action of heat, moisture, acids, 
alkalis, oxidizing agents, reducing agents, salts, organic ferments and coloring matter 
upon the fibres. Parallel with these lectures laboratory experiments are carried 
out by the performance of winch the student becomes familiar with the chemical 
and physical properties of the various fibres and the actions of the several agents 
upon them. 

This is followed by a series of lectures and experiments that illustrate the appli- 
cation of the above principles to practice. The student is taught bow to scour 
cotton, wool and silk; how to bleach these fibres by the use of sulphur dioxide, 
chlorine compounds and oxygen compounds. The mercerizing, fireproofing and 
waterproofing of cotton, the chlorination of wool, and the waterproofing of silk are 
also demonstrated. 

Now the application of the dyestuffs to the various fibres is studied. For con- 
venience the dyestuffs, whether of natural or synthetic origin, are classed as either 
substantive, acid, basic or mordant. The best method of application of each of 
the above groups is then taught. The dyed fibers are tested for their fastness to 
light, water, acid, alkalis, milling, stoving, chloring, crocking and hot finishing. 
Modified methods are then considered for the production of especial degrees of fast- 
ness to certain agents by after-treating of the dyed fibres. 

223. Dyeing 

This course is supplementary to the course in textile chemistry and dyeing and 
consists principally in the application of dyes to cotton and rayon. Lectures are 
given as the occasion requires, but most of the time is spent in the laboratory. 

Samples acquired in connection with the laboratory practice are mounted and 
bound with the above notes, which they serve to illustrate. 



22 
224. Dyeing 

The laboratory work of this term is mainly devoted to the printing of textile 
fabrics, especial emphasis being laid on cotton. The theory and practice of the 
various styles, such as the pigment style, the direct printing style, the steam style, 
or metallic or tannin mordants, resist and discharge dye styles, the developed azo 
style, the printing of indigo and similar dyestuffs and aniline black are studied. 
The student makes as many different prints as the time will allow. During the 
entire course the student accumulates many samples which he is required to mount 
in a specially designed sample book for his reference in the future. Special stress 
is laid on quality rather than quantity of work done. 

225. Dyeing 

During the course the general principles of cotton matching are taken up, and 
experimental work is carried on demonstrating the proper method of obtaining a 
given shade by mixing several dyes. Obtaining the value of a dye is taught, and 
the detection of adulterants. Finally, methods for determining the dye, either in 
the form of a dyestuff or on the dyed fabric, are considered. 

Construction and operation of jiggers. Speed of operation. Penetration of 
solutions used. Selection of dyestuffs. Preparation of dye liquor. Dyeing, wash- 
ing and after- treating. 

Construction of dye padders. Selection of material for rolls. Speed of ma- 
chines. Penetration of materials. Selection of dyestuffs. Washing off. After- 
treatment. 

226. Dyeing of Knit Goods 

The object of this course is to give the student an opportunity to dye commercial 
size lots of knit goods and hosiery. Lectures describing the various processes are 
given, and the necessary calculations are taught in connection with this course. 
Scouring and bleaching are also taught. The student is required to make use- of 
knowledge acquired in the previous courses in dyeing. 

230. Cotton Manufacture 

Cotton Manufacture is the name assigned to a course of lectures given to the 
second year students in chemistry, so that they may become acquainted with the 
methods employed in the manufacture of cotton yarn and cloth. The various 
machines are thoroughly described and the methods of using them discussed in the 
lecture room. Because of the limited amount of time allowed for this subject the 
students are not taught to operate the machines, but are given an opportunity to 
examine them at rest, and later to observe them in operation. 

233. Textile Chemistry I 

This subject comprises a study of the properties and analysis of soap, mordants 
and other chemicals used in the textile industries. One lecture of forty-five min- 
utes' duration is given each week, and frequent conferences are held with the 
student in the laboratory. The student is required constantly to consult standard 
books of reference in connection with his laboratory work. While the limited 
time devoted to this course does not give enough time for the student to make 
many complete analyses, it does illustrate to him the application of the knowledge 
acquired in the previous subjects of qualitative and quantitative analysis and 
organic chemistry. 

234. Textile Chemistry II 

This subject deals with coal, oil, soap, water, starches, sizing and softening com- 
pounds and textile fabrics. The commercial methods of obtaining the above sub- 
stances, their usual composition and application, is discussed in lectures. The 
laboratory work consists of the analysis of typical compounds, obtained from the 
consumers when possible. The detection of the various starches and fibers by the 
microscope is taught, and their separation and estimation by chemical methods. 
Sizing and loading of fabrics is also discussed. This course is very practical in its 
application, and accurate work is required. 



23 
235. Finishing of Cotton Fabrics 

The object of this course is to give to the designer a knowledge of the various 
methods used in finishing, and the effect of the same on the appearance and con- 
struction of the fabric. Simple methods of distinguishing between different fibres 
and finishes filled and pure starched cloths, are taught. The instruction is given 
by means of one lecture a week and two hours' laboratory practice. 

240. Singeing 

Construction of machine. Function of air pump. Adjustment of gas. Speed 
of operation. Singeing for a face finish. Singeing for a body finish. Determina- 
tion of best conditions for a particular cloth. 

241. Scouring 

Construction of kiers. Methods of circulation. Packing of goods. Time of 
boiling. Washing down. Use and operation of washing machines. Choice of 
scouring agent. 

242. Bleaching 

Construction of chemic vats and cisterns. Application of bleaching solution to 
the goods. Squeezers. Piling down. Precautions to prevent tendering action of 
bleaching agent. Washing. Use of "Antichlors." Openers and scutchers. Se- 
lection of bleaching agent. 

245. Mercerizing 

Construction of mercerizing machine. Design of tenter clips. Proper tension 
in tenter frame. Removal of caustic by washing. Neutralization of last traces. 
Variation in conditions to suit cloth treated. 

250. Drying 

Preparation of goods for drying. Importance of proper mangling. Construc- 
tion and operation of a mangle. Construction of the drying cylinders. Mechani- 
cal limits of speed of operation. Best speed in view of results obtained on goods. 
Static electricity and its grounding. 

Construction and use of tenter frames. Methods of heating, direct and indirect. 
Direction of air currents in relation to that of the cloth. Conditions giving the 
most rapid drying; the best width. Choice of tenter clip for a specific purpose. 

255. Calendering 

Types of calenders and various finishes obtained. Construction of a simple 
calender, friction calender, chasing calender, Schreiner and embossing calenders. 
Speeds and conditions governing the operation of the above machines. Use of 
scrimp bars and stretchers. Gas and steam heating. Metallic rolls, fibrous rolls, 
and finishes produced by them. Care of rolls. Use of water. So-called perma- 
nent calender finishes. Use of beetles and hot presses for preparation for calender- 
ing. Top finishing. 

260. Putting up 

Inspection of goods for faults. Classing as firsts, seconds, thirds and remnants. 
Yarding by flat folding, bjr rolling machines. Construction and operation of these 
machines. Various folds and put-up required by the several trades. Ticketing, 
banding and papering. Assortment in cases and storage of goods. 

269. Thesis 

Each student who is to graduate from the course in chemistry and d}^eing must 
devote twelve hours per week during the last half of his third year to original work, 
and at least one week before graduation must submit to the principal of the de- 
partment a thesis of not less than two thousand words based upon the results of his 
own investigations. 



24 

271. Elementary Knitting 

A study of the various types of winding machines used for cotton, wool and 
worsted yarns preparatory to running on the ribbers and hosiery machines. 

Principles of latch and spring needle knitting and a study of the various types of 
machines used for making rib tops. 

Construction study of the automatic hosiery machines used on coarse gauge work 
including men's, ladies' and children's hose. 

272. Advanced Knitting 

Winding and the preparation of cotton, worsted, rayon and silk yarns used in 
knitting. 

A study of the medium and fine gauge ribbers with draw-string, French welt and 
yarn changing attachments. 

Construction and adjustments used on medium and fine gauge full automatic 
hosiery machines for making plain and fancy pattern hosiery. 

273. Hosiery Finishing 

Fundamental principles and a study of the various types of loopers. Rough 
inspecting and the handling of work preparatory to going to the dyeing department. 

A study of the sewing machines used in finishing hosiery, including hemming, 
mock seam, clockwork, etc. 

Cloth analysis and testing of knitting yarns and fabrics. 

274. Hosiery Manufacture 

Mending, drying and pressing. Inspecting, pairing, stamping, folding, banding 
and boxing. 

Scientific management and the handling of goods and records throughout the 
mill and office. 

Cost control and a study of its application to the modern hosiery mill. 

281. Elementary Knitting 

A study of the various types of winding machines used for cotton, worsted, 
merino, rayon and silk yarns used in the manufacture of underwear. 

Principles of latch and spring needle knitting and a study of the various types of 
machines used in making cuffs, sleeves and body cloth. 

282. Underwear Cutting 

A study of pattern making and handling of cloth in the cutting department for 
making a line of men's, ladies', children's and infants' underwear. 

283. Underwear Finishing 

A study of the various finishes used on underwear. 

Setting up, adjusting and a study of the various types and makes of sewing ma- 
chines used in the manufacture of underwear. 

Cloth analysis and testing of knitting yarns and fabrics. 

284. Underwear Manufacturing 

Mending, inspecting, pressing, folding, banding and boxing of the finished gar- 
ment. 

Scientific management and the handling of goods and records throughout the 
mill and office. 

Cost control and a study of its application to the modern underwear mill. 

293. Miscellaneous Knitting 

Knitting fine French balbriggan cloth, worsted and merino cloth, single and 
double plush cloth, for fleece-lined underwear, made on spring needle frame. 

Sweater knitting, with racked rib and cuffs, pineapple stitch and fancy-colored 
effects, on circular rib machines. 

Full-fashion sweater knitting on the Lamb full-fashion, hand-power machine. 

Knitting gloves on the Lamb hand-power machine. 

Different processes of finishing balbriggan, worsted, merino and fleeced cloth 
into underwear readv for market. 




H 

Pi 

< 

Ph 

K 
Q 

O 

> 
I 

<! 

.J 
O 

O 
> 



25 

294. Knitting 

The aim of this work is to give to the student an insight into the class of work for 
which a large part of the yarn in a yarn mill is made. 

Ihe different types of knitting machines are studied, aDd in each case the effect 
upon the machine and fabric of imperfect yarn is gone into carefully. 

295. Testing 

This course is a study of the methods used in the testing of cotton yarns and 
fabrics throughout the mill. It includes atmospheric conditions and their effect 
on testing, determining moisture regain, tensile strength, twist, evenness, cleanli- 
ness, cloth anafysis and identification of textile fibres. 

296. Rayon Processing 

Instruction in the winding of skeins and cones on to spools and quills. The 
soaking and the throwing of the yarn. Warping on the silk system and slashing. 

297. Rayon Testing 

The analysis of rayon yarns and fabrics. Identification of mixed fibres. Meth- 
ods of finding the percentages of fibres in yarns and fabrics. 

298. Microscopy 

The object of this course is to instruct the student in the use and manipulation 
of the microscope. Methods of mounting, cross sectioning, micrometry, camera 
lucida drawings, measuring and counting are taken up. 

Instruction is also given in photomicrography, that is, the taking of photographs 
through the microscope, in developing and printing, obtaining the magnifications 
and enlarging. 

On completion of the above the student is given yarns and fabrics, which are un- 
familiar to him or which have defects, to analyze. 

300. Picking, Carding and Roving 

Cotton yarn mill machinery. Machines required for making different numbers 
of counts of yarn. 

Picking Room. — Bale breakers or openers, their use and how operated. 

Automatic feeders, their construction, methods of setting and adjusting; evener 
motions, calculations. 

Openers, their use and object. The different kinds used and the class of cotton 
for which they are best adapted. The different kinds of beaters used, and the 
speeds at which they should run. 

Cleaning trunks, their uses and operation. 

Breaker, intermediate and finisher lappers. Different styles and makes of 
machines. The construction and operation of the different parts, setting and ad- 
justing the different parts, and arranging the speeds to give the best results. Cal- 
culations for speeds, drafts, weights and production on the different machines. 

Cards. — The different kinds of cards used; their construction and operation. 

The revolving flat card. Its principal parts. Different methods of setting, dif- 
ferent settings for different classes of w r ork. The speeds of the different parts, and 
their effect on the quality of the w T ork produced. Construction of card clothing. 
Clothing cylinder doffer and top flats. Stripping and grinding cards. Grinding 
and testing top flats. Covering grinding rolls. Splicing driving ropes and belts. 

Calculations for speeds, drafts, production, per cent of waste, etc. 

Roving Frames. — The different processes used. The construction and use of 
the roving or fly frame. 

Speeds of the different size frames and the different parts of the frame. 

The different styles of differentials used and their object. 

Cone drums. The effect of the shape of the cones on the running of the frames. 
Levelling and adjusting roving frames. Balancing flyers, and the effect of un- 
balanced flyers on the running of the frame. 

The effect of draft and twist on the quality and quantity of the work produced. 
Roller setting. Calculations for speeds, drafts, twist, tension and lay. Calcula- 
tions for differentials, cone drums and productions. 



26 
301. Special Knitting 

Operations preliminary to knitting. Winding, cone winding, bobbin winding. 
Development of knitting. Knitting needles. Construction and operation of latch 
and spring needles. Knitting on circular and flat machines. Study of the results 
of uneven, mixed and otherwise imperfect yarns in the knitting process, and the 
effect upon the machine and fabric. 

302. Drawing Rolls and Drawing Frames. Ring Spinning. Doubling and 

Drafting 

Drawing Rolls. — The different kinds of rolls used, their construction, methods 
of covering, setting and adjusting for different kinds of work. Clearers for draw- 
ing rolls. 

Drawing Frames. — The railway head and evener draw frame. The construc- 
tion and arrangement of drawing frames. Different methods of gearing, weighting 
and stop-motions for draw frames. Calculations for speeds, drafts, dividing drafts, 
production, etc. 

The Ring Spinning Frame. — Its construction and use. The construction and 
adjustment of the different parts, such as spindles, rings, travelers, rollers, builder 
motions, etc. Making bands. Comparing different drives for spindles. Twist 
in yarn, its effect on strength and production. Calculations for speeds, drafts, 
twist and production. 

Doubling and Drafting. — Laying out drafts and weights at the different ma- 
chines from picker to spinning frame for making different numbers of yarn. 

Calculating the number of machines required at the different processes to pro- 
duce a required amount of yarn of different numbers. 

Calculating the labor cost of making roving or yarn, using different methods. 

Calculating the effect of draft at the different machines on the production and 
cost of the yarn made. 

303. Combing and Mule Spinning 

Sliver and ribbon lap machines. Construction of the different machines. 
Methods of setting and operating same. 

Combers. — The different kinds of combers used; their speeds and productions. 
Comber setting and adjusting and methods of operating. 

Roll Varnishing. — The percentage scale and its use. Practice work in setting 
and operating the different combers. 

Calculations for speeds, drafts, productions, etc., on the lap machines and 
combers. 

Mules. — The spinning mule and its uses. The special features of the mule. 
Description of the construction and operation of the different parts of the mule. 
Calculations for speeds, drafts, etc., and all calculations required in making changes. 

Practice work in laying out and carrying through the work for making different 
counts of yarn from the raw stock to the finished thread. 

304. Twisting and Cotton Classing 

The Object of Twisting. — Different styles of twisters used. Wet and dry 
twisting. Direction of twist. Effect of twist on the strength, weight or counts. 

Preparing yarn for twisting. 

Making ply threads, cords, cordonnet and sewing threads. 

Sizes of rings and spindle speeds for different threads. Calculations for speeds, 
twists and productions. 

Cotton Classing. — Different species of cotton plants. 

Cultivation of cotton. The different varieties of cotton and the class of goods 
for which they are best adapted. 

Cotton picking, ginning, baling and marketing. The selection of cotton for 
different classes of goods. 

Cotton grading and stapling. 

Practice work in running work from raw stock to spinning and twisting. 



27 

305. Test Work and Roller Covering 

Test Work. — Testing different classes of cotton and comparing results for waste 
removed and strength of yarn made. Testing different methods of handling cotton, 
using different speeds; drafts and numbers of processes used and comparing results. 

Roller Covering. — Covering top roll and under clearers. 

Cutting, piecing, drawing on, burning down and burnishing. 

306. Yarn Testing and Comber Reneedling 

Yarn Testing. — Testing yarns for weight or counts, breaking weight (skein or 
single). Inspecting yarn, testing for moisture, amount of twist in single or ply 
yarn. Testing for contraction in single yarn; for contraction or expansion in ply 
threads. Testing for elasticity. 

Comber Reneedling. — Cleaning off, setting needles, soldering on, building half 
laps, polishing and finishing same. 

Practical work in running tests through the machines. 

TEXTBOOKS AND LECTURE SHEETS USED IN THE SCHOOL 

Chemistry Department 

Smith's "Elementary Chemistry," Noyes' "Qualitative Analysis," Talbot's 
"Quantitative Analysis," Conant's "Organic Chemistry," Blanchard's "Syn- 
thetic Inorganic Chemistry," Smith's "College Chemistry," Gill's "Power Plant 
Chemistry." 

Mechanical Department 

"Practical Mechanics," Hale; W. H. Timbie's "Essentials of Electricity." 
"Industrial Mathematics," Farnsworth. 

Rayon Department 
Rayon and Synthetic Yarn Handbook. 

Other Departments 

No textbooks are used in the departments other than those named above. Lec- 
tures are prepared by the heads of the departments covering the work in detail, 
multigraphed, and sold to the students at cost. These, with design books, design 
pads, color supplies and notebooks, constitute the working material to be provided 
by students. 

EVENING CLASSES 

Evening instruction, similar to the day, on the same machinery and hy the heads 
of the day departments assisted by practical skilled men from the mills, is given 
for the benefit of workers in local mills and machine shops. The instruction in the 
evening classes is divided into sections so as to give the greatest possible facilities 
to the students in these classes. 

Certificates are granted to all students in the evening classes who have success- 
fully completed the equivalent of two years' work, two evenings a week. The 
certificate states the subjects that the student has passed in, and the length of time 
he has devoted to the work. 

Evening students are enrolled at the commencement of both the fall and spring 
terms. The subjects taken up in the different evening courses follow the detailed 
topics as specified on page 27. 

The school is in session four evenings a week for twenty- three weeks, — Monday, 
Tuesday, Thursday and Friday, from 7.30 to 9.15, for all classes except those in the 
Chemistry Department. Those classes are held three nights a week, — Monday 
and Tuesday, from 7 to 9.30, and Thursday, from 7.15 to 9.15. 

For terms of admission and fees, see page 30 of this catalogue. 

COURSES OF INSTRUCTION, EVENING CLASSES 

Carding and Spinning Department 

Mill Calculations and Picking: one term, two evenings a week. 
Carding and Drawing: one term, two evenings a week. 
Combing: one term, two evenings a week. 
Roving Frames: one term, two evenings a week. 



28 

Ring Spinning and Twisting : one term, two evenings a week. 

Mule Spinning : one year, two evenings a week. 

Cotton Classing: one term, one evening a week. 

Advanced Calculations in Carding and Spinning: one year, one evening a week. 

Women's Textile Preparation Course: one term, one evening a week. 

Weaving and Warp Preparation Departments 

Spooling, Warping and Slashing: one term, two evenings a week. 

Automatic Loom Fixing : one term, two evenings a week. 

Plain Loom Fixing : one term, two evenings a week. 

Fancy Loom Fixing : one term, two evenings a week. 

Jacquard Loom Fixing : one term, two evenings a week. 

Advanced Calculations in Weaving: one term, two evenings a week. 

Warp Drawing for Women : one term, two evenings a week. 

Designing Department 

Elementary Designing: one term, two evenings a week. 
Advanced Designing: one term, two evenings a week. 
Elementary Analysis: one term, two evenings a week. 
Advanced Analysis: one term, two evenings a week. 
Jacquard Designing: one term, two evenings a week. 

Knitting Department 

Special Knitting : two evenings a week each term. 

Rayon Department 

Rayon Processing. — Winding, Warping and Slashing: one year, two evenings 
a week. 
Microscopy: one year, two evenings a week. 

Engineering Department 

Mechanical Drawing: one year, two evenings a week. 
Advanced Drawing: one year, two evenings a week. 
Machine Drawing : one year, two evenings a week. 
Mechanical Designing : one year, two evenings a week. 
Machine-shop Practice : one year, two evenings a week. 
Advanced Shop Work: one year, two evenings a week. 
Steam Engineering: one year, one evening a week. 

Chemistry Department 

General Chemistry: one year, two evenings a week. 
Qualitative Analysis: one year, two evenings a week. 
Quantitative Analysis: one year, two evenings a week. 
Organic Chemistry : one year, two evenings a week. 
Textile Chemistry I : one year, two evenings a week. 
Textile Chemistry II : one year, two evenings a week. 
Dyeing I: one year, two evenings a week. 
Dyeing II: one year, two evenings a week. 
Dyeing III: one year, two evenings a week. 

Mathematics 

Cost Finding: one term, two evenings a week. 

Evening Diploma Courses 

The school diploma will be granted to those students of the evening classes who 
successfully complete the work specified under the following courses: — 

I. Carding and Spinning. — Picking, Carding and Drawing, Roving Frames, 
Combing, Ring Spinning and Twisting, Mule Spinning (or some other subject), 
Cotton Sampling, Advanced Calculations in Carding and Spinning, Mechanical 
Drawing, Advanced Drawing. 



29 

II. Weaving and Designing. — Spooling, Warping and Slashing, Plain Loom 
Fixing, Fancy Loom Fixing, Elementary Designing and Cloth Analysis, Advanced 
Designing and Cloth Analysis, Jacquard Designing, Cotton Sampling, Mechanical 
Drawing, Advanced Drawing, Cost Finding. 

III. Chemistry and Dyeing. — General Chemistry, Qualitative Analysis, 
Quantitative Analysis, Organic Chemistry, Textile Chemistry I, Textile Chemis- 
try II, Dyeing I, Dyeing II, Dyeing III, Mechanical Drawing, Advanced Drawing. 

Courses for Women 

Several courses are open for women in the day and evening classes and a num- 
ber have pursued them successfully. They are as follows: — 

Cotton Sampling. 



Textile Designing. 
Chemistry and Dyeing. 
Cost Finding. 
Testing and Fabric Analysis. 



Warp Drawing. 

Rayon Winding and Warping. 

Textile Preparation. 



GENERAL INFORMATION 

CONDITIONS OF ADMISSION TO DAY CLASSES 

Candidates for admission to the day courses must be at least sixteen years of age. 
Those who have been students of other technical institutions, colleges or universi- 
ties are required to furnish a certificate of honorable dismissal from those institu- 
tions. Candidates having a diploma from a high school or other educational institu- 
tion of equal standing are admitted without examination. Other applicants for 
admission to the diploma courses are required to pass examinations in arithmetic, 
English and commercial geography and those desiring to enter the Chemistry, 
Dyeing and Finishing Course must pass additional examinations in elementary 
algebra and plane geometry. 

A candidate, whether desiring to be enrolled on diploma or by passing the en- 
trance examinations, must fill out an application blank, which should be delivered 
to the school as early as possible before the opening of the school year. 

Applicants desiring to take up special studies in the school may be admitted 
provided their applications are approved by the Principal. Such students shall 
be known as specials, and, upon satisfactory completion of their work in the school, 
shall be given certificates stating the work they have covered and the time they 
have been in attendance. 

No applicant is admitted to the regular courses of the school after the first four 
weeks unless he has already covered the work of the school for the time preceding 
the date of his application; nor shall any change in any student's course be made 
after the first four weeks of admission except by permission of the Principal. 

ENTRANCE EXAMINATION FOR DAY STUDENTS 

The examinations for those desiring to enter the school at the opening of the fall 
term of 1937 will be held at the school only, on Wednesday, June 2, and on Wednes- 
day, September 8, at 9 A.M. 

The detailed topics dealt with in the entrance examinations are as follows: — 

Arithmetic 

Definitions, addition, subtraction, multiplication, division, factors, multiples, 
cancellation, fractions, decimals, percentage, interest, ratio and proportion, square 
root, compound quantities, mensuration, metric system. 

English 

The candidate will be required to show his ability to spell, capitalize and punctu- 
ate correctly; to show a practical knowledge of the essentials of English grammar, 
a good training in the construction of the sentence, and familiarity with the simple 
principles of paragraph division and structure. 

He will be required to write a business letter, and one or more short articles on 
subjects assigned from which he may select. Ability to express himself clearly and 
accurately will be considered of prime importance. 



30 

Commercial Geography 

Farm products of the United States, where raised; our mines, and where located; 
our manufactures, and where established; our exports, and to what countries; our 
imports and from what countries; our transportation facilities. 

Algebra 

Literal numbers, positive and negative numbers, addition and subtraction of 
polynomials, parentheses, multiplication of polynomials by monomials, etc., divi- 
sion of polynomials by monomials, etc., simple equations, fractions, graphical 
representation, linear equations having two unknowns, simple square root and 
quadratic equations. 

Plane Geometry 

Lines and rectilinear figures, circles, proportion, areas of polygons and 
regular polygons. 

CONDITIONS OF ADMISSION TO EVENING CLASSES 

Candidates for admission to evening classes must be at least fourteen years of age. 

Those desiring to enter any of the courses in the various departments must 
satisfy the head of the department which they desire to enter that they have suf- 
ficient knowledge to be benefited by the instruction offered. 

FEES 

Day Students. — A tuition fee of $20 a year is charged day students who are 
residents of Massachusetts. For non-resident students the fee is $150 a year, and 
for students from foreign countries $300 a year. All tuition fees are payable in 
advance in tw T o equal installments, at the opening of each semester. No student 
shall be admitted to the classes until his tuition is paid. No fees are refunded ex- 
cept by special action of the Board of Trustees. 

The above fee includes admission to any of the evening classes in which there is 
accommodation, and w r hich the day students may desire to attend. 

A deposit of $10 is required of all day students taking the regular Chemistry 
and Dyeing Course. A deposit of $5 is required of students taking chemistry in 
connection with any other course. These deposits are to cover the cost of any 
breakage that may occur, but in case the actual breakage exceeds this amount an 
additional charge is made. Any unexpended balance in excess of 25 cents is re- 
turned at the end of the year. 

To non-resident and foreign students a further charge of $10 for chemicals is 
made. 

A fee of $5 is charged each day student, to be used for assisting in the maintenance 
of athletics in the school and provides admission to all athletic activities. 

All fees are due at the beginning of each semester. 

Students are required to supply themselves with such books, tools and materials 
as are recommended by the school, and pay for any breakage or damage that they 
may cause in addition to the above-named fee. 

Evening Students. — No tuition fee is charged evening students who are residents 
of Massachusetts. For non-resident students the tuition fees are as follows: 

• For courses, except those in the chemistry department: 
$6 per twelve week term, 2 evenings a week. 
$3 per twelve week term, 1 evening a week. 
For courses in the chemistry department: 

3 evenings a week for 12 week term: $11 for tuition and $1 for chemicals. 
2 evenings a week for 12 week term: $7 for tuition and $1 for chemicals. 

All students, whether resident or non-resident, who enroll in the chemistry de- 
partment courses, are required to make a deposit of $5 for breakage. In case the 
breakage caused by any student does not equal the amount of his deposit, the 
balance in excess of 25 cents is returned to him at the close of the school year, but 
if the breakage is in excess of this deposit, the student is charged the additional 
amount. Evening students are required to supply themselves with such books 
and materials as are recommended by the school, but this charge is small. 

Non-resident students and students from foreign countries, if attending the day 
classes, are charged no additional tuition fee if they desire to attend evening classes. 



31 
SCHOOL HOURS 

The school hours for the day classes are from 8.30 to 12 each morning except 
Saturdays, with afternoon sessions from 1.00 to 4.00 except Saturdays. For ses- 
sions of evening classes see page 27 

EXAMINATIONS, CERTIFICATES AND DIPLOMAS 

Written examinations are held twice a year, and other tests from time to time to 
determine the standing of students in their work. 

The final examination is held at the end of the spring term. Results of these 
examinations, together with the student's marks recorded from recitations, practi- 
cal demonstrations and students' books are taken into account in ranking students 
at the end of each year and for graduation. Unsatisfactory progress necessitates 
the student repeating his studies. 

Diplomas are given on the satisfactory completion of a course of study extend- 
ing over a period of three years in connection with each course, if the student's 
record is otherwise satisfactory. 

Students taking special courses in most cases are entitled to a certificate if they 
honorably and satisfactorily complete the course of instruction scheduled. 

Day students are required to spend as much time daily out of school hours in 
study, such as recording lectures and other notes, as may be necessary to maintain 
proper standing. The students' books are examined by the instructors periodi- 
cally, and the care and accuracy with which they are kept is considered in ranking 
students. 

CONDUCT 

Students are required to conduct themselves in an orderly and gentlemanly 
manner while in attendance at the school. When the conduct of any student is 
considered by the Principal of the school detrimental to its best interests, he will 
be suspended by him and the case reported to the Board of Trustees for action. 

Any student who presents at any time work as his own which he has not per- 
formed, or tries to pass an examination by dishonorable means, shall be regarded 
as having committed a serious offence. 

Students shall exercise due care in the use of the school apparatus and machinery. 
All breakages and accidents must be reported at once to the instructor in charge 
and the student will be held liable for any wilful damage or the result of gross 
carelessness. 

ATTENDANCE 

Day students taking the regular courses are required to attend every exercise of 
the school; special students, every exercise called for by their schedules. For 
every case of absence or tardiness students must present an excuse to the Principal. 
A certain number of unsatisfactory excuses will render the student liable to sus- 
pension and further action if cause is sufficient. 

When the attendance of an evening student is unsatisfactory he will render 
himself liable to be dropped from the school. 

BOARD AND ROOMS 

New Bedford is unusually desirable as a residential city, and students will find 
numerous houses of private families and boarding houses where they ma}^ obtain 
room and board. 

Xo requirements are made as to residence of out-of-town students, although 
facilities are given by having addresses of suitable houses on file at the school. 

Xo definite estimate can be made of the cost, as this depends entirely on the 
tastes of the student, but board and room may be obtained for from §10 per week 
upwards. 

TOOLS AND MATERIALS 

Students are required to purchase such materials, textbooks, tools and apparatus 
as may be required from time to time by the school authorities, or make deposits 
on such as are loaned to them. The supplies required vary with the courses for 
which the students enter, the cost being from §20 to $50 per year. 



32 
LIBRARY 

The school maintains a library that contains all the best works on carding and 
spinning, weaving, designing, knitting, dyeing and mechanics; also a consulting 
encyclopedia and an international dictionary. Catalogues and pamphlets dealing 
with machinery or processes related to textile work are also on file, as are all the 
leading textile journals and trade papers. The students have access to the library 
during school hours and books may be loaned to students for a specified time. 

ATHLETICS 

The school has an athletic association, and the students participate actively in 
various sports and games. The school is equipped with a gymnasium, locker 
room and shower baths. There are several athletic fields open to the students for 
their outdoor sports. The management of the school will give all reasonable en- 
couragement and support to the furtherance of healthful recreation and manly 
sports for its students. 

For fee for same see page 30 of this catalogue. 

THE WILLIAM FIRTH SCHOLARSHIPS AT THE NEW BEDFORD 

TEXTILE SCHOOL 

The donation of William Firth, Esq., has established a sum of money at the New 
Bedford Textile School, primarily for the benefit of sons of members or of deceased 
members of the National Association of Cotton Manufacturers, furnishing to the 
recipients of such scholarships tuition fees as approved by the Board of Trustees 
of the school. Candidates for these scholarships must apply by letter only. The 
candidates must be at least sixteen years of age and furnish certificates of good 
moral character, and those who have been students of other technical institutions, 
colleges or other universities are required to furnish certificates of honorable dis- 
missal from such institutions. Every candidate must file an application at the 
school for admission, agreeing to observe the rules and regulations of the school. 
Candidates are eligible for any of the courses included in the curriculum of the 
school. 

In case the sons of members or of deceased members of the National Association 
of Cotton Manufacturers do not apply for the scholarship, any person eligible for 
entrance to the school may make application. 

These scholarships will be available in the fall of 1937. 

THE MANNING EMERY, JR., SCHOLARSHIPS AT THE NEW BEDFORD 

TEXTILE SCHOOL 

The donation by the Passaic Cotton Mills Corporation and its employees of the 
sum of $3,000 has established scholarships at the New Bedford Textile School, 
primarily for the benefit of the employees of the Passaic Cotton Mills Corporation 
and in accordance with an indenture entered into between the above-named 
Passaic Cotton Mills Corporation and its employees and the Trustees of the New 
Bedford Textile School. 

In default of any application from an employee of the Passaic Cotton Mills 
Corporation who is deemed by the Trustees of the New Bedford Textile School as 
qualified to enter that institution, the Trustees of the New Bedford Textile School 
may, at their discretion, nominate, with the approval of the Passaic Cotton Mills 
Corporation, other persons to be the beneficiaries of this scholarship. Such appli- 
cants must comply with such reasonable regulations and conditions as said New 
Bedford Textile School may from time to time adopt in relation thereto. 

From said applicants students shall be selected by the Trustees of the New Bed- 
ford Textile School as beneficiaries of said scholarships. 

These scholarships will be available in the fall of 1937. 

THE NATIONAL ASSOCIATION OF COTTON 
MANUFACTURERS MEDAL 

The National Association of Cotton Manufacturers offers a medal to be awarded 
each year to the student in the graduating class who shows the greatest proficiency 
in scholarship. This is determined by an examination of the records of the stu- 



33 

dents' progress throughout their studies, which are recorded and reported upon 
by the instructors and kept permanently on file. 

The competition for this medal is open to all day students who graduate in the 
Complete Cotton Manufacturing Course, or to evening students who have com- 
pleted studies comprised in that course and graduated therein. The association 
offering the medal has made it a condition of the award that at least four members 
of the graduating class be eligible to the competition. 

THE WILLIAM E. HATCH MEDAL 

This medal is awarded to the member of the freshman class taking the General 
Cotton Manufacturing Course who ranks the highest in scholarship for the year. 
It is presented by the Alumni Association, to commemorate the day of Mr. William 
E. Hatch's retirement from the presidency of the school. 

THE PETER SLATER MEDAL 

This medal is presented by Mr. Victor 0. B. Slater, a graduate of the evening 
classes of the school, in memory of his father, Peter Slater, who was a loyal friend 
of the school. It is awarded to the student graduating from the evening classes 
in Textile Design, who has attained the highest standing for the two-year course. 

EQUIPMENT 
COTTON CARDING AND SPINNING DEPARTMENT 

This department occupies nearly the entire first floor of the machinery building, 
and has approximately 9,000 square feet of floor surface. The equipment is large 
and diversified, enabling the students to become acquainted with practically all the 
leading makes of machines found in the carding or spinning departments of cotton 
mills. 

A special feature of the equipment is the large number of models of the principal 
parts of the different machines in this department. These models are so mounted 
that the different settings and adjustments can be made equally as well as on the 
machine itself, and thus enable the student to grasp more readily the essential 
points, since the parts are much more readily accessible. 

The department is humidified by the system of the American Moistening Com- 
pany, Bahnson humidifiers, the Parks-Cramer Company's Turbo System and the 
American Air Purifying Company's portable humidifiers, automatic control. 
Carver Cotton Gin Co. : 118 saw cotton gin. 

Saco-Lo well Shops: 1 roving waste machine; 1 automatic feeder; 1 opener and 
breaker lapper; 1 finisher lapper ; 1 card; 1 evener draw frame; 1 two-head 
draw frame; 1 fine roving frame; 2 spinning frames; 1 Perham & Davis evener 
motion complete with feed rolls and cones. 
H. & B. American Machine Co.: 1 finisher lapper; 2 cards; 1 drawing frame; 
2 roving frames; 2 spinning frames; 1 section of arch with bend; 1 spinning 
builder motion; 1 roving builder motion; 2 differentials. 
Mason Machine Works: 1 card; 1 railway head. 
John Hetherington & Sons, Ltd.: 1 card; 1 sliver lap machine; 2 combers; 1 

mule; 1 camless winder; 1 nipper model. 
Potter & Johnson: 1 card. 

Whitin Machine Works: 2 cards; 1 sliver lap machine; 1 ribbon lap machine; 
4 combers; 1 drawing frame; 2 roving frames; 2 spinning frames; 1 model 
spinning builder. 
Woonsocket Machine & Press Co.: 1 card; 2 drawing frames; 2 roving frames; 
1 differential; 1 roving builder motion; 1 gassing machine; 1 combination bale 
breaker, Crighton opener and horizontal cleaner; 1 section card arch with bend. 
Dobson & Barlow : 1 fine roving frame; 1 roller and clearer card; 1 mule. 
Asa Lees: 1 roving differential motion. 
Fales & Jenks Machine Co. : 3 spinning frames; 1 twister. 
Draper Corporation: 2 twisters; 1 banding machine. 
Collins Brothers: 1 twister. 

Universal Winding Company: 1 No. 50 combination winder; 1 No. 90 bobbin 
winder; 1 G. F. 60 winder. 



34 

Foster Machine Co. : 2 doubling winders. 

Sonoco Products Co. : 1 roller covering outfit for cork rolls. 

Miscellaneous Equipment: Roller covering machinery; apparatus for comber 
re-needling: card clothing machine; ball and spool winding machines. 

Testing Apparatus: 3 single thread testers; skein and cloth tester; conditioning 
and testing machine; inspecting machine; yarn and roving reels; yarn bal- 
ances; percentage scale; micro-photographic machine; twist counters; thread 
splicers; electric oven recording thermometer, recording hygro thermograph 
and rotostat; 1 fibre tester; 1 Aldrich regain indicator. 

WEAVING AND WARP PREPARATION DEPARTMENT 

This department occupies all of the second floor of the machinery building and 
contains about 15,000 square feet of floor area. The equipment is very complete 
and includes sufficient machinery to enable each student to obtain all the practical 
experience required in connection with his studies. All of the latest machinery is 
represented in this equipment, and, as the machinery is made especially for use in 
the school, it fully meets the needs of the students. Besides the machinery listed 
below there are models for demonstrating leno motions, box motions, warp-stop 
motions, etc. 

Draper Corporation: 4 automatic looms, plain, 2-harness; 1 automatic 5-harness 

cam loom; 1 automatic 20-harness dobby loom; 1 spooler; 2 warpers. 
Crompton & Knowles Loom Works: 5 plain 3-harness, 4 plain 4-harness, 5 plain 
5-harness looms; 16x1 gingham loom; 12x1 automatic bobbin changing 
gingham loom; 14x1 gingham loom; 13x1 1 2-harness towel loom; 14x1 
20-harness No. 13 multiplier loom; 1 20-harness double cylinder loom; 2 20- 
harness dobby looms; 2 2-bar lappet looms; 3 25-harness 2x1 box and leno 
motion looms; 8 16-harness 2x1 box and leno motion looms; 3 25-harness 
leno motion looms; 10 20-harness leno motion looms; 1 double-lift Jacquard, 
600 hook loom; 1 double-lift Jacquard, 208 hook loom; 1 double-lift Jacquard, 
300 hook loom; 1 double-lift Jacquard, 400 hook loom; 2 4x1 20-harness leno 
motion looms; 2 4x1 20-harness dobby, double cylinder automatic bobbin 
changing looms; 2 4x4 20-harness dobby looms; 2 25-harness Cotton King 
4x1 Automatic and leno motion looms. 
Whitin Machine Works: 2 plain, 3-harness looms; 2 plain, 4-harness looms; 9 
plain, 5-harness looms; 1 25-harness 2x1 box motion loom; 1 25-harness 2x1 
box motion and leno motion loom ; 3 25-harness leno motion looms. 
Stafford Co.: 1 20-harness automatic shuttle changing loom; 1 plain automatic 
shuttle changing loom; 1 silk or rayon automatic shuttle changing loom, 
changeable from plain to 3 or 4-harness twill; 1 20-harness automatic bobbin 
changing loom. 
Hopedale Mfg. Co.: 1 Nordray plain, 2-harness, automatic loom. 
Easton & Burnham Machine Co.: 1 spooler. 
T. C. Entwistle Co.: 1 warper; 1 ball warper; 1 beamer. 
Howard & Bullough Machine Co. : 1 slasher. 

Warp Compressing Machine Co.: 1 600-end rayon creel and dresser. 
22 dra wing-in frames. 

DESIGNING DEPARTMENT 
The design classroom is located on the third floor of the recitation building, and 
is a large, well-lighted room containing all the appliances necessary for instruction 
in this important subject. Special attention has been given to the method of 
lighting this room to give the best results, and the desks are made with special 
reference to the needs of the student of designing. 

The hand loom work is located in a large room on the third floor of the machinery 
building. This room contains twenty-seven hand looms adapted to the use of 
students in experimental work, and in putting into practice. the theory of designing, 
and also to enable them to produce certain of the designs that they are taught in 
the designing class. There is also a 20 spindle bobbin winder and one hand winder. 
The room is well lighted by a saw tooth roof. 

The card cutting room contains two Royle card cutting machines and three card 
lacing frames, thus enabling the students working Jacquard designs to cut their 
own cards. 




H 
< 

Ph 

p 

H 

CO 



W 

o 

m 

CO 

O 

o 
> 



35 
MECHANICAL DEPARTMENT 

Instruction in the mechanical department is carried on in five different rooms 
located in various parts of the recitation building. These rooms are arranged and 
fitted out with apparatus to meet the needs of the students following this course. 
The department is subdivided into the following sections: mechanical drawing, 
textile engineering and machine-shop work. 

Mechanical Drawing. — The drafting room is located on the second floor of the 
recitation building and is well lighted by northern and western exposures. It is 
equipped with independent drawing tables and lockers for the drawing boards and 
materials. For the students' use in connection with their drafting instruction there 
is a collection of models, mechanical apparatus and machine parts. On the third 
floor there is a swinging blueprint frame mounted on a track, and a large dark 
room fitted with a Wagenhorst Electric Blue Printer and modern conveniences for 
blueprinting. 

Steam Engineering and Elementary Electricity. — Instruction in steam engineering 
and elementary electricity is given both in theory and practice. The theoretical 
part of the course is carried on in a large recitation room on the second floor, while 
the practical side is studied in the engineering laboratory in the basement of the 
recitation building. The laboratory is supplied with steam direct from the boiler 
room and also has gas and water connections. 1 12" x 24" Wetherell Corliss 
Engine; one 5-horsepower Sturtevant Vertical Steam Engine, and models of boilers, 
engines and pumps. 

For the study of electricity there is provided a source of alternating current at 
110 volts and 220 volts pressure. 

1 2KW Holtzer-Cabot direct-current Generator; 1 5-horsepower Holtzer-Cabot 
Induction Motor; 1 2^KW Holtzer-Cabot compound wound Converter; an assort- 
ment of voltmeters, ammeters, wattmeters, galvanometer, foot candle meter, 
transformers, etc. 

Machine Shop. — This department occupies about 2,800 square feet of floor sur- 
face on the first floor of the recitation building. The machinery is electrically 
driven and the equipment modern. 

7 12" x 5 ft. Reed Prentice Engine lathes; 3 12" x 6 ft. Reed Prentice engine 
lathes; 1 18" x 8 ft. Reed Prentice engine lathe; 1 14" x 6 ft. Reed Prentice quick 
change gear engine lathe; 1 14" x 6 ft. Whitcomb-Blaisdell quick change gear 
engine lathe; 1 14" x 6 ft. Hendey quick change gear engine lathe; 2 14" x 6 ft. 
Flather engine lathes; 1 7" x 5 ft. Reed Prentice speed lathe; 1 10" x 5 ft. speed 
lathe; 1 20" Prentice drill; 2 Bench drills; 1 No. 4 Reed "Barr" single sensitive 
spindle drill; 1 No. 1% Brown & Sharpe universal milling machine; 1 No. 2 Brown 
& Sharpe universal milling machine; 1 16" Potter & Johnson universal shaper; 
2 16" Ohio shapers; 1 24" x 6 ft. Woodward & Powell planer; 1 Morse plain grinder; 
1 Greenfield universal grinder, complete; 1 2y^" x 20" Diamond water tool grinder; 
1 2" x 12" Builders bench grinder; 1 4" x 28" Douglas grindstone; 1 Millers Falls 
power hack saw; 1 Peerless electric tool post grinder; 1 Cincinnati electric hand 
drill; 1 Westmacott gas forge; 1 Wallace circular saw; 1 4" Wallace planer; 1 
Cabinet containing milling machine attachments, small tools and minor apparatus; 
1 Brown & Sharpe No. 2 wire feed screw machine; 1 Oxweld welding equipment; 
1 Black & Decker electric drill. 

CHEMISTRY DYEING AND FINISHING DEPARTMENT 

This department occupies about 13,600 square feet, situated in the basement 
and on the first and third floors of the recitation building. This space is divided 
into four laboratories, a lecture and recitation room, a reading room and office for 
the Principal of the department, and two store-rooms. The general chemistry and 
dyeing laboratory is a large, well-lighted room, 63 feet 6 inches by 20 feet, on the 
first floor, and is especially designed to meet the needs of the students in the general 
courses. This laboratory is equipped with forty-two double desks in rows of three 
desks each. At the end of each row is situated the sink and dye bath. Along the 
wall, on the opposite side are the hoods. In the main special laboratory each 
student has desk space, 2 feet by 8 feet, and his own desk, dye bath and draught 
hood. Conveniently located are a large drying oven, four 10-gallon dye kettles, 



36 

and one 20-gallon dye kettle. This laboratory is equipped at each desk with gas, 
water and suction in order that the student's work may be carried on with the 
utmost celerity conducive to the best results. This laboratory is also equipped 
for analytical work and has 10 balances, a polariscope, 1 Spencer microscope No. 5, 
triple nose piece, objectives 16, 4, and 1.8 oil immersion, mechanical stage; 1 Spen- 
cer rotary microtome, 2 other microscopes, an Emerson calorimeter, a Westphal 
balance, a Saybolt universal viscosimeter, and other special apparatus. The 
laboratory for converting cotton textiles is located in the basement. It contains 
the machines necessary to demonstrate in practical proportions the operations in- 
volved, such as a single-burner Butterworth gas singer complete with air pump 
and spark extinguisher, a 100 lb. Jefferson kier, an experimental piece mercerizing 
machine, a 3 roll padding machine, a 6 cylinder horizontal drying machine, equipped 
with the Files exhausting system, 2 40" jigs, a steam heated calender, and a 30 
foot automatic tentering machine with Butterworth patent automatic clips. In 
this laboratory there is also a small Hussong dyeing machine and a Franklin dyeing 
machine for yarn dyeing. On the Hussong machine there is a Tagliabue tem- 
perature controller. A high top cloth folder and a Dinsmore portable sewing 
machine are part of the equipment although situated in another room. There is 
also one laboratory printing machine from the Textile-Finishing Machinery Com- 
pany and one fade-ometer. 

KNITTING AND RAYON DEPARTMENT 

The knitting department occupies two large connecting rooms on the top floor 
of the machinery building, and contains about 6,600 square feet of floor area. The 
equipment is very complete, there being a greater number of machines and a larger 
variety than can be found in any similar school in the world. The work that has 
been produced by the students of this department has received high praise from 
some of the leading experts in the knitting trade, the hosiery and underwear taking 
especially high rank. 

Crane Mfg. Co.: 1 36-gauge spring needle table, 18" and 21" cylinders; 1 15" 
8 cut rib body machine; 1 19" 14 cut rib body machine with Crawford stop 
motion. 
Hemphill Co.: 1 "Banner" 3^'/ 176 needle automatic footer; 1 "Banner" 3}4" 
220 needle automatic footer; 1 "Banner" 3>£" 240 needle automatic striper; 
1 "Banner" Zy 2 " 240 needle split footer._ 
Jenckes Knitting Machine Co.: 1 "Invincible" 4" 108 needle automatic footer; 
1 "Invincible" 3%" 188 needle automatic footer; 1 "Invincible" 3" 120 needle 
automatic footer; 1 "Invincible" 3%"' 240 needle automatic footer; 1 "In- 
vincible'; Zy A " 176 needle automatic footer; 1 "Invincible" 3H" 160 needle 
automatic footer. 
Fidelity Machine Co.: 1 3y 2 " 220 needle automatic ribber; 1 3y 2 " 240 needle 

automatic ribber; 1 3" 180 needle automatic ribber. 
H. Brinton Company: 1 3%"' 108 and 188 needle automatic ribber; 1 4" 84 
and 160 needle automatic ribber; 1 3y 240 needle automatic ribber; 1 6" 
480 needle ribber; 1 \y 2 " 90 needle scarf machine. 
Lamb Knitting Machine Co.: 1 6-cut scarf machine; 1 flat 8-cut glove machine. 
Mayo Machine Co.: 1 y 176 needle automatic footer; 1 3]/ 2 " 188 needle 
automatic footer; 1 3y 2 " 200 needle automatic footer; 1 3y 220 needle 
automatic footer. 
Scott & Williams: 1 3y A " 176 and 200 needle automatic ribber; 1 3H" 176 
and 180 needle automatic ribber; 1 ^%" 180 needle automatic ribber; 1 
4><" 216 needle automatic ribber; 1 4)4" 276 needle automatic ribber; 1 
4*4" 300 needle automatic ribber; 1 3J4" 160 needle automatic sleever; 1 
3%" 264 needle automatic ribber; 1 10" 8 and 10 cut automatic rib-body 
machine; 1 13" 10 cut automatic rib-body machine; 1 20" 12-cut plain and 
2-2 body machine; 1 18" 26-cut Balbriggan body machine; 1 20" 16-cut 
Balbriggan body machine; 1 20" 14-cut rib-cuff machine; 1 3y 2 " 240 needle 
Model K machine; 1 3y 2 " 200 needle Model HH machine; 1 3y A " 160 needle 
Model RI machine; 1 3 l /i" 140 needle Model RI machine; 1 finishing machine; 
1 bar-stitch machine; 1 chain machine; 1 12-point looper; 1 3^4" 280 needle 
Model K machine; 1 220 needle Model HH Spiral float machine. 



37 

Wildman Mfg. Co.: 1 Z%" 200 needle fancy pattern automatic ribber; 1 2^" 
120 needle necktie machine; 1 Zyi" 188 and 200 needle automatic ribber; 
1 3}4" 220 and 240 needle automatic ribber; 1 tyi" 180 needle automatic 
sleever; 1 4^£" 216 needle automatic ribber; 1 4>^" 272 needle automatic 
ribber; 1 13" 8 and 12-cut automatic rib-body machine; 1 18" 14-cut plain 
and 2-2 rib-body machine; 1 Ballard electric cloth cutter. 

Merrow Machine Co.: 1 60D overseaming machine; 1 60S hemming machine; 
1 60AD overedging machine; 1 60UD cloc- stitch machine; 135FJ schell ma- 
chine; 1 60Q schell machine; 1 60JDC overseaming machine. 

Metropolitan Sewing Machine Co.: 1 150 CD lace neck machine; 1 50 CH-10 
taper collarette machine; 1 30TC seaming machine; 1 251 cover-seaming 
machine; 1 192 BX facing machine; 1 28GC-1 stay machine; 1 192 W-5 elastic 
machine. 

Singer Sewing Machine Co. : 1 44 lock stitch machine; 1 24 chain stitch machine; 
1 24-8 drawer finishing machine; 1 32-29 eyelet machine; 1 68-7 button sewing 
machine; 1 79-6 buttonhole machine; 1 79-1 tacking machine. 

Standard Sewing Machine Co. : 1 buttonhole machine. 

Union Special Sewing Machine Co.: 1 class 3.000 lace machine; 1 class 5,800 
collarette machine; 1 class 16,100 facing machine; 1 class 6,000 chain stitch 
machine; 1 class 2,300 chain stitch machine with Dewee's trimmer; 1 class 
11,900 12 gauge cover seaming machine; 1 class 11,900 16-gauge cover seam- 
ing machine; 1 class 15,400 seaming ma chin e; 1 grinder. 

Wilcox & Gibbs Sewing Machine Co. : 1 lock-stitch machine; 1 flatlock machine; 
3 over-lock machines ; 1 f eld-lock machine. 

Stafford & Holt : 1 14" 6-cut sweater machine. 

Tompkins Bros. Co.: 1 spring needle table, 22 gauge 20" and 36 gauge 18". 

United Shoe Machinery Co.: 1 metal eyelet machine. 

The Beattie Mfg. Co.: 1 16-point looper; 1 22-point looper. 

Grosser Knitting Machine Co.: 1 Koehler 20-point looper; 1 Koehler 24-point 
looper. 

Southern Textile Machinery Co.-: 1 Wright steady dial 22-point looper; 1 Wright 
steady dial 28-point looper. 

John W. Hepworth & Co.: 1 16-point C. R. D. looper. 

Saco-Lowell Shops: 1 24-end camless winder. 

W. D. Huse & Sons: 2 bottle bobbin winders. 

George W. Payne & Co.: 1 bottle bobbin winder. 

Universal Winding Co. : 1 No. 50 cone winder; 1 No. 90 bobbin winder; 1 No. 60 
cone winder. 

Henry H. Skevington & Co.: 1 floating thread cutter. 

Excelsior Cloth Dryer: 1 Excelsior cloth dryer. 

Philadelphia Drying Machine Co. : 1 Hurricane steam press; 1 Hurricane hosiery 
and underwear dryer; 1 Electric hosiery dryer. 

Lewis Jones: 1 hosiery and underwear brushing machine. 

Paramount Hosiery Form Drying Co.: 1 set metal hosiery forms, men's, ladies' 
and children's. 

Joseph T. Pearson: 120 hosiery boards, men's, ladies' and children's. 

Stampagraph Co.: Dry transfers for hosiery. 

Harding Brook Co.: 1 Acme Hosiery Binder. 

C^vald Lever Co.: 1 18 end bobbin winder; 1 20 spindle quill winder. 

Atwood Machine Co.: 1 16 end bobbin winder; 1 silk warper with creel. 

Kumagraph Co.: Dry transfers for hosiery. 

Allen town Bobbin Works: 500 silk bobbins. 

Rayon Equipment: 1 soaking and extracting machine; 1 rayon spinner (twister). 

Microscopy Laboratory Equipment: Bausch & Lomb Optical Co.: 2 textile 
microscopes; 1 camera lucida; 1 Filar micrometer; 1 complete photomicro- 
graphic camera; 1 counting and 1 micrometer disc. 

Spencer Lens Co.: 1 binocular wide field microscope. 

6 work boxes; 9 lamps and apparatus for cross sectioning. 

Testing Apparatus: 3 twist testers; 1 Casartelli balance; 2 chemical balances; 
1 set of stapling machines; 1 yarn reel; 1 cotton and 1 rayon yarn quadrant; 
1 tensometer. 



38 
POWER, HEAT AND LIGHT PLANT 

For some years the school manufactured its power and light, but owing to the 
growth of the school plant it became necessary either to make a large expenditure 
for a new power plant or to purchase power and light, and the latter plan was 
determined upon. 

The equipment in this department consists of 1 Cahall 60 H.P. vertical boiler; 
1 Stirling 105 H.P. water tubular boiler; 1 B. & W. 155 H.P. water tubular boiler; 
1 Deane 4>^" x 2$i" x 4" duplex double outside packed plunger steam pump con- 
nected to a receiver tank; 1 Worthington b% " x 3^" x 5" single steam pump; 
1 Riley 100 H.P. feed water heater; 1 Atwood and Morrill damper regulator; 1 
Sturtevant 75 H.P. horizontal center crank engine; 1 Westinghouse 50 K.W., 220 
volt, 3 phase, alternating current generator, direct connected; 1 Westinghouse 
4 K.W., 125 volt, direct current generator; 1 General Electric recording wattmeter; 

1 W. S. Hill 4 panel switchboard equipped with 9 Wagner indicating ammeters, 

2 Wagner indicating voltmeters, 1 Thomson 50 K.W. 3 phase integrating watt- 
meter, 2 direct reading K.W. meters, 14 Wagner current transformers, 1 Westing- 
house combination rheostat, 1 General Electric combination rheostat, 2 Condit 
Electrical Manufacturing Company's 250 volt circuit breakers, all necessary 
switches, bus bars, etc. ; 2 wing turbine fans for forced draft; 1 Cochrane oil separa- 
tor; 1 Sturtevant heating and ventilating outfit; 1 American Moistening Co.'s 
humidifying outfit; also 1 Parks-Cramer Company's, 1 Bahnson Company's and 
1 American Portable humidifying outfit; and 43 electric motors ranging from 
Vs H.P. to 15 H.P. 



GRADUATION EXERCISES 

March (The Architects of Fortune) C. E. Jones 

N. Y. A. Orchestra 

Prayer 

Rev. Raymond B. Bourgoin 

Opening Address John T. Kirk 

President of the Board of Trustees 

Selection (By the Waters of Minnetonka) Lieurance 

' N. Y. A. Orchestra 

Address Franklin W. Hobbs 

Chairman of The Textile Foundation 

Presentation of The National Association of Cotton Manufacturers' Medal 

Frank I. Neild 
President of the National Association of Cotton Manufacturers 

Presentation of The William E. Hatch Medal 

George Walker, Trustee 

Presentation of The Peter H. Slater Medal 

Hon. Samuel Ross, Trustee 

Presentation of Diplomas and Certificates to Graduates of Day and Evening Classes 

Dr. Joseph N. Finni, Trustee 

Presentation of Class Picture 

David M. Aulisio 
President of the Class of 1936 

Remarks Joseph H. Handford 

Principal of the School 

March (King Cotton) Souza 

N. Y. A. Orchestra 



39 
GRADUATES— 1936 

Day Classes — Diploma Courses 

General Cotton Manufacturing 



Andrew Chatterton Adams 
David Marino Aulisio 
Clifford Nicholas Beck 
Edward Emile Begin 
Henry Deptula 
Edmund Kenneth Flynn 



Carl Lincoln Hardy 

William Timothy Leahy, Jr. 

Leon Lipsett 

Francis Edward McMullen 

George Thomas Mitchell 

Arthur Hargreaves Pilkington 

Hyman David Rothkopf 



Chemistry, Dyeing and Finishing 
Richard Owen Barry John Harrison 

Russell Arnold Carroll George Bernard Krumholz, Jr. 

Laurence Thornton Durfee, Jr. James Edward Parkin 

Laurence Oliver Giguere Charles Royal Parkinson 

Herbert Ellsworth Greenough Bernard Rioux 

Raymond Walter Szulik 



Harold J. Brindley 
Arthur F. Col well, Jr. 
S. Maurice Goodell 
Irving Kestenbaum 
Armando Lacerda 
Kenneth Ruffley 
Trefton A. Soucy 
Lloyd G. Turner 
Thomas McK. Bonnar 
Charles F. Lovejoy 



Day Classes — Certificate Courses 

Special Subjects One Year 

Mechanical Two Years 

Mechanical Two Years 

Mechanical Two Years 

Mechanical Two Years 

Mechanical Two Years 

Mechanical Two Years 

Mechanical Two Years 
Chemistry Course — Out of Course One Year 

Mechanical — Post Graduate One Year 



Evening Classes — Diploma Courses 

Carding and Spinning 
Louis E. Boudreau 

Weaving and Designing 



Ernest A. DesMarais 



Walter S. McPhail 



Evening Classes — Certificate Courses 

Thirteen Years 
Norman Singleton 



Raymond D. Illingworth 



John Drinkwatei 
Robert W. Gardner 



Milton W. Barrett 
Manuel Correia 
Adelard Emond 



Seven Years 



Six Years 

Alphonse Jeannenot 
Edward W. Kowalczyk 
Edward M. Ladino 

Five Years 
Amedee Goulet 
Albert J. Hawkes 
Robert C. Lambalot 
Maurice Margerison 



Alan S. Wrigley 



William A. McGuffie 
Louis Rossi 



Ernest Roberts 
John Whewell 
Milo Zelinka 



Aquila W. Adams 
Daniel T. Constant 
Charles F. Crooks 
Kazmierz Gesiak 
William Hall 



40 

Four Years 
Ernest Lamb, Jr. 
James M. Leadbetter 
Arthur S. Marshall 
Harold J. O'Brien 
Omer E. Pigeon 
Chester Ponichtera 



Edwina E. Secour 
John L. Souza 
Mitchell Tomkowicz 
Joseph Walmsley 
Joseph T. Zych 



Winselau P. Barros 
Richard H. Bennett 
Joseph H. Bergeron 
Conrad Blanchard 
Wilfrid Blanchette 
Arthur B. Briggs 
Albert S. Broadband 
Charles 0. Broadland 
John Catlow 
Ernest Cote 
Alfred Durocher 
Joseph Ewaszko 
Augustine Faria, Jr. 



Antone Almeida 
Frank J. Almeida 
John Antunes 
Theophile Arguin 
Frank J. Ataman 
Romeo Aubut 
Raymond H. Bauer 
Arthur Bergeron 
Theophane Bergeron 
Jean Bickerstaff 
Omer Breault 
Anthonv Brown 
Elmer G. Brown 
Ernest J. Cadieux 
Joseph N. Camara 
Joaquim Candido 
Emil T. Cobb 
Edmund F. Correia 
Joseph Correia 
Adelaide Costa 
Evelyn Costa 
Armand Cote 
Gerard Cote 
William Crane 
Lionel Cusson 
Albert Desrosiers 



Three Years 
Manuel A. Ferreira, Jr. 
Manuel R. Fontes 
John Germain 
Horace E. Handford 
Reginald L. Hargreaves 
Thomas Hindle 
Walter Jachna 
Annie C. John 
John G. Leva 
Louis Makuch 
Daniel Mendonca 
Joseph W. Ochab 
Manuel Oliveria 
Alphonse Piekut 

Two Years 

Henry Desrosiers 
Joseph Devlin 
Earl S. Eaton 
Arthur Faria 
Joaquim Faria 
Walter J. Ford 
James Gardner 
John B. Girouard 
Gerard L. Gonneville 
Fred Gorman 
Harold E. Hawes 
Arthur Hebert 
William Hebert 
Albert Laflamme 
Louis F. X. Lague 
Robert LaHaye 
Thomas J. Lewis 
Harold J. Lynch 
Mary MacFarland 
Wilbur Macy 
Eugene Magnant 
Joseph Marcellino 
Clarence E Maxcy 
Honore Michaud, Jr. 
Joseph Michaud 



Justin B. Poole 
Philip E. Reynolds 
Gil Souza 
Manuel G. Souza 
George E. Taber 
Dennis C. Tavares 
Leo Telesmanick 
Herbert Thompson 
Henry G. Turcot te 
James Turner 
Domingos Vera 
John Zaretto 
Victor Zolnierz 



Andrew J. Mignerey 
Helen Misiaszek 
Rodney 0. Morse 
Stanley Niedzwiedzki 
Andrew Olejarz 
Lucien Ouimet 
Roland A. Perrin 
Lester C. Pierce 
George Pomfret 
Roland Pomfret 
Preston H. Richmond 
Charles L. Riley, Jr. 
Leon A. Robitaille 
Frank N. Rushworth 
Augustine P. Santos 
Virginio Simas 
Aloysius Smith 
Evelyn A. Soule 
Joseph Souza 
Charles L. Stacey 
Albenia L. Sylvia 
Joseph Towers, Jr. 
Telesphore W. Turcotte 
Leo Vautrin 
John Whalley 
Louis J. Witkos 



41 

ALPHABETICAL LIST OF GRADUATES 

The following list has been corrected in accordance with information received 
previous to March 1st, 1937. Any information regarding incorrect or missing 
addresses is earnestly solicited. 

D indicates a diploma ; C indicates a certificate (covering a partial course only) ; 
S indicates special course. 

Achorn, Robert E., Jr., I, '15 (D). Designer, Wauregan Co., Wauregan, Conn. 
Adamowicz, Charles S., '30 (C). New Bedford, Mass. 

Adams, Andrew C, I, '36 (D). Detail Draftsman, Draper Corp., Hopedale, Mass. 
Adams, Elbert V., I, '22 (D). In Auto Tire Dept,, Montgomery, Ward & Co., 

Chicago, 111. 
Adams, James H., I, '29 (D). With Nottingham Neckwear Co., New Bedford, 

lYtass 
Adelsohn, Arthur A., Ill, '28 (D). New Bedford, Mass. 
Agrella, Charles J., II, '30 (D). With Dutchess Bleachery, Wappinger's Falls, 

New York. 
Akin, Francis T., Ill, '32 (D). New Bedford, Mass. 
Albakri, Mathew S., I, '25 (C). Foreman of Dye House, Societe Syrienne, 

Amin Dial & Co., Damascus, Syria. 
Allan, William W., I, '15 (D). Superintendent, Baltic Mills Co., Baltic, Coun. 
Allen, Anne, III, '35 (D). Post Graduate Work, New Bedford Textile School, 

New Bedford, Mass. 
Allen, Glawyer G., I, '25 (C). With Graniteville Mfg. Co., Graniteville, S. C. 
Allen, John T., Ill, '30 (D). With Farr Alpaca Co., Holyoke, Mass. 
Allen, Stanley I., Ill, '30 (D). With Grasselli Chemical Co., Grasselli, N. J. 
Amaral, Roy, I, '33 (D). With Nonquitt Mills, New Bedford, Mass. 
Amarantes, Jerry O., VI, '19 (C). Clerk, Amarantes' Garage, New Bedford, 

M!ass 
Ambler, Harry, III, '17 (D). 
Amona, Cheng Q., I. '17 (D). Professor of Electrical Engineering, Canton 

Technical College, Canton, China. 
Anderson, Elliot F., S, '32 (C). 
Anderson, Hilmer H., S, '22 (C). Superintendent, Brookdale Mills, Franklin, 

Mass. 
Armitage, Stanley W., I, '25 (D). Superintendent, Meritas Mills, McComb, 

Mississippi. 
Ashley, Milton I., Ill, '34 (D). With Glenlyon Print Works, Phillipsdale, R. I. 
Aulisio, David M., I, '36 (D). With Wamsutta Mills, New Bedford, Mass. 
Austin, Harold S., VI, '24 (C). Asst. Routing Board Manager, Lewis Mfg. Co., 

Walpole, Mass. 
Axtell, G. Moody, III, '34 (D). Chemist, Revere Copper & Brass Co., New- 
Bedford, Mass. 

Babcock, Howard L., VI, '21 (C). With Durr Packing Company, Utica, N. Y. 

Baldwin, Fred L., S, '05 (C). 

Balloch, Roger T., IV, '21 (D). Textile Reporter, New Bedford, Mass. 

Banks, Winthrop E., Ill, '35 (D). Taunton, Mass. 

Barber, Ernest L., S, '31 (C). Steam Fireman, New Bedford Textile School, 

New Bedford, Mass. 
Barrett, Edward W., I, '21 (C). 
Barron, George L., S., '35 (C). Sales Agent, John J. Gobell, New Bedford, 

Mass. 
Barrows, John T. Ill, '23 (C). Dentist, 96 Thompson St., New Bedford, Mass. 
Barrows, Murray F., S, '05 (C). Asst. Treasurer, Bristol County Mortgage 

Co., New Bedford, Mass. 
Barry, Richard O., Ill, '36 (D). With Apponaug Co., Apponaug, R. I. 
Bartlett, William, S, '30 (C). Newport Torpedo Station, Newport, R. I. 
Bates, Howard S., IX, '33 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 



42 

Bates, Merton H., II, '20 (D). Painter, Osterville, Mass. 

Bearcovitch, Alfred J., I, '15 (D). Dyer, Mansfield Bleachery, Mansfield, 

Mass. 
Beaumont, William I, '25 (T>). Superintendent, Aiken Mill, Bath, S. G 
Beauvais, Raymond F., II, '34 (D). 

Beck, Clifford N., I, '36 (D). With U. S. Bobbin & Shuttle Co., Lawrence, Mass. 
Beetham, William, Jr., S, '32 (C). 6 Belgrave Ave., Penwortham, Preston, 

Lancashire, England. 
Begin, Edward E., I, '36 (D). With Jeandros Dye & Print Works, New Bedford, 

Mass. 
Bentley, Milton J., I,. '11 (D). With Whitin Machine Works, Whitinsville, 

Mass. 
Bergeron, William, S, '33 (C). Acushnet, Mass. 
Berkman, Philip, III, '32 (D). New Bedford, Mass. 
Besse, Allen D., I, '22 (D). Assistant Designer, Wamsutta Mills, New Bedford, 

Mass. 
Besse, Edward L., Jr., I, '22 (D). Overseer, Worcester Tire Fabric Co., Worces- 
ter, Mass. 
Bessette, Leo A., I, '15 (D). Captain of Infantry, 13. S. A. Army, Fort Meade, 

Md. 
Bisbee, Robert T., I, '26 (C). Designing Dept., Beacon Mfg. Company, Swan- 

nanoa, N. C. 
Bister, Frederick J., I, '09 (D). With John Bister, Cotton Umbrella Cloth, 920 

Broadway, New York City, N. Y. 
Biswas, Khitish C, I, '28 (D). India. 
Bjorngren, Victor J., S, '29 (C). With Hathaway Machinery Co., Fairhaven, 

Mass. 
Blair, William G., Jr., I, '08 (D). 
Blake, John J., I, '15 (D). 
Blake, Wendall C, I, '25 (D). Taunton, Mass. 
Blauvelt, John J., I, '22 (D). Assistant Superintendent, Belmont Silk Co., 

^Kingston, Pa. 
Blossom, Carlton S., I, '16 (D). With S. Slater & Sons, Inc., Webster, Mass. 
Blossom, James W., I, '17 (D). With Blossom Bros., New Bedford, Mass. 
Boardman, Ellen G., VII, '26 (C). Mrs. John T. Lund, Swansea, Mass. 
Boehler, Charles, IX, '34 (C). With Continental Wood Screw Co., New Bed- 
ford, Mass. 
Bonnar, Thomas M., Ill, '36 (C). Student, Worcester Polytechnic Institute, 

Worcester, Mass. 
Boomer, Thomas M., Jr., I, '27 (D). With Westport Manufacturing Co., 

Westport, Mass. 
Booth, William, VI, '08 (D). 
Borden, Eliot F., Ill, '28 (D). With New Bedford Rayon Co., New Bedford, 

Mass. 
Bosse, Lillian B., S, '34 (C). New Bedford, Mass. 
Bottomley, Fred, S, '23 (C). New Bedford, Mass. 
Boutin, Leon A., IX, '28 (C). Machinist, South Middleboro, Mass. 
Boyd, W. MacPherson, I, '22 (D). Superintendent, Canadian Cottons, Ltd., 

Hamilton, Ontario, Canada. 
Brand, Warren E., Ill, '34 (D). With the Gardiner Hall, Jr. Co., So. Wellington, 

Conn. 
Braun, Leon A., I, '23 (D). Registered Druggist, Leominster, Mass. 
Brend, Albert, II, '15 (C). 

Brindley, Harold J., S, '36 (C). With Lonsdale Co., Lonsdale, R. I. 
Broadmeadow, John C., Ill, '32 (D). With National Aniline & Chemical Co,, 

Buffalo, N. Y. 
Brody, Louis, II, '33 (D). With Brody Furniture Co., New Bedford, Mass. 
Brookes, Clifford, II, '29 (D). Designer, Page Mfg. Company, New Bedford, 

Mass. 
Brooks, Ruby E., II, '22 (C). Mrs. Bradford A. Luce. 



43 

Brotherson, Curtis S., I, '28 (D). Farmer, Acushnet, Mass. 

Brown, James P., VI, '11 (C). Secretary, Glencairn Manufacturing Co., Paw- 
tucket, R. I. 

Brown, Walter A., I, '17 (C). Overseer of Spinning, S. Slater & Sons, Inc., 
Webster, Mass. 

Brownell, Ulysses G., Jr., I, '21 (D). Colonial Drug Store, Hyannis, Mass. 

Bruce, William, I, '27 (D). Efficiency Man, Bigelow Carpet Co., Thompson- 
ville, Conn. 

Bruneau, V. Herbert, I, '23 (D). Manager, Canadian Cottons, Ltd., St. Croix 
Mill, Milltown, New Brunswick, Canada. 

Brunelle, Laurier O., I, '19 (D). New Bedford, Mass. 

Brunette, Romeo, VI, '23 (C). Tester, The Fiske Rubber Co., Ninigret Division, 
New Bedford, Mass. 

Buckley, Charles E., II, '01 (D). With Warwick Mills, Warwick, R. I. 

Burt, Raymond A., Ill, '14 (D). 

Burt, Stuart W., IV, '26 (C). Head Dyer, Jeandros Dye & Print Works, New 
Bedford, Mass. 

Cairns, James J., S, '19 (C). Designer, Hood Rubber Co., Watertown, Mass. 

Campbell, Malcolm E., I, '22 (D). Cotton Specialist, U. S. Dept. of Agriculture, 
Clemson College, S. C. 

Carlow, Charles L., II, '26 (D). Overseer of Weaving, Berkshire Cotton Mills, 
Adams, Mass. 

Carlson, Sigfred A., Ill, '26 (D). Consulting Chemist, Boston Elevated Rail- 
ways, 536 Harrison Ave., Boston, Mass. 

Carlson, Theodore E., I, '28 (D). With United Rayon Mills, Fall River, Mass. 

Carroll, Russell A., Ill, '36 (D). With Providence Drysalters Co., East Green- 
wich, R. I. 

Carvalho, Joao B. deM., I, '20 (D). 207 7 de Setembre, Sala 1, Sobrado, Rio de 

T/-)T1P1T , H 7* f\ 71 1 ^ /\ 

Cassidy, Elizabeth B., Ill, '22 (D). School Teacher, 69 Tremont St., New 
Bedford, Mass. 

Cazenove, James O'H., I, '05 (D). 

Chace, Mason E., Ill, '35 (D). New Bedford, Mass. 

Chan, Annie C, IV, '23 (C). The Foot Ease Hosiery Mfg. Co., 2612 E. Yuhang 
Road, Shanghai, China. 

Chang, Chin Y., I, '08 (D). 

Chang, Fa-Kien, I, '23 (C). Shantung, China. 

Chang, Mu W.,S, '21 (C). 

Chase, Alton W., II, '09 (D). Overseer of Carding, Gosnold Mills Co., New 
Bedford, Mass. 

Chase, Raymond H., I, '10 (D). Superintendent, Potter Fine Spinners, Inc., 
Pawtucket, R. I. 

Checkman, Frank E., I, '23 (D). West Wareham, Mass. 

Chen, TingF., I, '12 (D). 

Chesebro, Robert E., IV, '24 (C). Secretary and Treasurer, Hand Knit Hosiery 
Co., Sheboygan, Wis. 

Childs, Raymond C, III, '32 (D). Chemist, National Aniline & Chemical Co., 
Buffalo, N. Y. 

Chow, Frank L. H., S, '14 (C). Superintendent, Loo Fong Cotton Mills, Shan- 
tung, China. 

Church, Morton LeB., S, '04 (C). Southern Representative of Catlin & Co., 
1017 Commercial Bank Bldg., Charlotte, N. C. 

Ciborowski, Mitchell S., S, '34 (C). New Bedford, Mass. 

Cierpial, Leon J., IX, '33 (C). With Morse Twist Drill & Machine Co., New 
Bedford, Mass. 

Clancy, Martin F., I, '25 (D). Comber Man, Queen City Cotton Mill, Burling- 
ton, Vt. 

Clark, Kenyon H., V, '11 (D). 

Clark, Ralph H., Ill, '35 (D). With Nashua Finishing Co., Nashua, N. H. 

Clarke, Edward W., I, '13 (D). 



44 

Clarke, William T., Ill, '33 (D). With Arkwright Co., Fall River, Mass. 
Cleveland, Frank H., Ill, '34 (D). With New Bedford Cotton Mills, New Bed- 
ford, Mass. 
Coates, James E., Jr., I, '22 (D). Cost Department, Utica Steam & Mohawk 

Valley Cotton Mill, Utica, N. Y. 
Cody, Edmond, I, '23 (C). Overseer in Card Room, Whitin Brothers, Linwood, 

Mass. 
Cohen, Barney, I, '33 (D). With Nathan Cohen (Meats), 1029 Acushnet Ave., 

New Bedford, Mass. 
Cohen, Morris H., Ill, '35 (D). New Bedford, Mass. 
Collins, Henry I, '24 (D). With Collins Bros., Pawtucket, R. I. 
Colwell, Arthur F., Jr., IX, '36 (C). With Hathaway Machinery Co., Fairhaven, 

Mass. 
Cook, Preston W., Ill, '31 (D). With Glenlyon Print Works, Phillipsdale, R. I. 
Cook, Seabury, S, '25 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Cookson, Albert, I, '23 (D). Overseer of Spinning, Cannon Co., Kannapolis, 

N. C. 
Cooper, John J. W., I, '05 (D). With E. P. Sheldon & Sons, 1008-1010 Hospital 

Trust Bldg., Providence, R. I. 
Cornell, Harold C, I, '11 (D). Custom Service, U. S. A. (89 Lincoln St.), 

Dedham, Mass. 
Cornell, Maurice A., I, '21 (D). Master Mariner, South Dartmouth, Mass. 
Cornish, Ruth C, II, '22 (C). 
Corson, Sidney W., I, '05 (D). Overseer of Carding, Oneita Knitting Mills, 

Utica, N. Y. 
Craig, James, Jr., Ill, '35 (D). With Pontiac Finishing Co., Pontiac, R. I. 
Crawford, Fred E., II, '22 (D). Salesman, John S. Cheever Co., Boston, Mass. 
Crossley, Lawton, III, '16 (C). Chemist, Borne, Scrymser Co., Elizabeth, N, J. 
Crowley, Joseph J., Ill, '35 (D). With IJ. S. Finishing Co., Norwich, Conn. 
Cumming, Robert W., Jr., II, '26 (C). With J. & P. Coates Co., Pawtucket, 

R.I. 
Currie, Andrew, Jr., I, '02 (D). Oil Operator, 1800 Highland Ave., Shreveport, 

La. 
Curry, Walter F., Ill, '24 (D). With the Apponaug Co., Apponaug, R. I. 
Cygan, Henry F., IX, '32 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Czehowski, Henry, S, '29 (C). 112 County Street, New Bedford, Mass. 

Dalrymple, George S., Ill, '22 (D). 

Damon, A. Durfee, III, '31 (D). With Dutchess Bleachery, Wappinger's Falls, 
N. Y. 

Darling, Elton R., Ill, '13 (D). Director of Research, Cornstalk Products 
Co., Danville, 111. 

Davies, James A., Ill, '34 (D). With Apponaug Company, Apponaug, R.T. 

Davis, Albert H., I, '16 (C). Commission Merchant and Broker of cotton yarns 
and fabrics, 79 Verndale Ave., Providence, R. I. 

Davis, Francis J., I, '26 (D). In garage in Fitchburg, Mass. 

Davis, Russell O., VI, '27 (C). With Wauregan Mills, Wauregan, Conn. 

Deane, Robert J., Ill, '17 (D). Superintendent, Hartsville Bleacherv, Harts- 
ville, S. C. 

Delano, Lloyd S., I, '07 (D). Superintendent of Weaving, Amoskeag Manu- 
facturing Co., Manchester, N. H. 

Delano, Stephen C. L., IX, '33 (C). With New Bedford Rayon Co., New Bed- 
ford, Mass. 

Delay, John T., Ill, '17 (D). Chemist, Merrimac Chemical Company, Everett, 
Mass. 

DeMarco, Henry J., S, '30 (C). With Shelton Mills, Shelton, Conn. 

DeMarest, R. Alfred, III, '33 (D). With Lawton Mills, Plainfield, Conn. 

DeMartin, Richard S., VI, '06 (D). 

Dennis, Charles W., Ill, '32 (D). Apponaug Co., Apponaug, R. I. 



45 

Deptula, Henry, I, '36 (D). With Prudential Insurance Co., Fall River, Mass. 
Deptula, Walter J., I, '31 (D). With Devonshire Mills, New Bedford, Mass. 
Deu, Yee B., I and IV, '08 (D). 
DeVine, Richard I, '26 (D). Salesman, North American Rayon Corp., Eliza- 

bethtown, Tenn. 
Devoll, Milton C, II, '09 (D). Cotton Salesman, 384 Acushnet Ave., New 

Bedford, Mass. 
Dewey, Edward W., V, '11 (D). Superintendent and Buyer, Bennington Hosiery 

Company, Bennington, Vt. 
Dick, Rudolph C, I, '13 (D). Treasurer and General Manager, Pequot Mills, 

Salem, Mass. 
Dixon, Fred M., Jr., S, '17 (C). 
Doherty, Edward P., II, '04 (D). Doherty's Protective Agency, New Bedford, 

Mass. 
Dolan, Edward F., S, '14 (C). Proprietor of Ohio Threading and Supply Co., 

Burkburnett, Texas. 
Donaghy, Paul A., Ill, '22 (D). Salesman, Corn Products Refining Co., 47 

Farnsworth St., Boston, Mass. 
Donnelly, Christopher L., Ill, '35 (D). 

Dow, James B., I, '30 (D). Assistant to Mr. Conrad, The Conrad Manufac- 
turing Co., Pawtucket, R. I. 
Dowd, Owen J., Jr., S, '31 (C). With Devon Mill, New Bedford, Mass. 
Drozek, M. Peter, I, '29 (D). With Devon Mill. New Bedford, Mass. 
Dubiel, Mark T., Ill, '32 (D). Chiropodist, New Bedford, Mass. 
Duckworth, George H., S, '23 (C). Federal Prohibition Agent, Baltimore, Md. 
Duflot, John, I, '24 (C). Asst. Mgr., W. C. Jones, 19 Rue d'Avesnes, Lille, 

(Nord) France. 
Duncan, Donald T., II, '21 (C). With H. R. Mallinson, 509 Madison Ave., 

New York City, N. Y. 
Dunmore, Earl W., V, '11 (D). Superintendent, Utica Knitting Company, Mill 

No. 2, Utica, N. Y. 
Dunn, Edward F., I, '24 (D). Building Wrecker, 144 Wayland Ave., Apt. 8, 

Providence, R. I. 
Dupont, Emey, Jr., I, '25 (D). 
Dupre, Edmund J., Ill, '34 (D). With New Bedford Print and Dye Co., New 

Bedford, Mass. 
Durfee, Laurence T., Jr., Ill, '36 (D). With Angier and Earle, Inc., Cambridge, 

Mass. 
Dutton, Howard O., Ill, '32 (D). With Crompton Company, West Warwick, 

R.I. 
Dutton, Ruth M., VII, '35 (C). With Pairpoint Corp., New Bedford, Mass. 

Edmondson, Norman V., Ill, '34 (D). Student, North Carolina State College, 
Raleigh, N. C. 

Edmundson, Christopher, Jr., IX, '34 (C) . Bench Assembler, Brown & Sharpe, 
Providence, R. I. 

Edwards, Harold G., I, '19 (D). Treasurer, Bush & Company, New Bedford, 
Mass. 

Espriella, Antonio J. de la, II, '15 (D). Manager Weaving and Designing De- 
partment, Espriella & Co., Cartagena, Colombia, S. A. 

Espriella, Justo de la, S, '13 (C). Manager of Cotton Yarn Department, 
Espriella & Co., Cartagena, Colombia, S. A. 

Espriella, Luis C. de la, I, '16 (C). With Espriella & Co., Cartagena, Colombia, 
S. A. 

Ewing, James H., Ill, '23 (D). With North American Rayon Corp., Elizabeth- 
ton, Tenn. 

Fagan, Francis J., V, '12 (D). With Veterans' Relief Bureau, Utica, N. Y. 
Farr, William, Jr., S, '29 (C). With Naval Torpedo Station, Newport, R. I. 
Farrar, Hersey W., I, '17 (D). Designer, Hathaway Manufacturing Co., New 

Bedford, Mass. 



46 

Farrow, Edward S., I, '29 (D). With Devon Mills, New Bedford, Mass. 
Fawcett, John L., I, '28 (D). Head of Knitting and Rayon Dept., New Bedford 

Textile School, New Bedford, Mass. 
Fead, Charles L., IV, '27 (C). Manufacturer of Heavy Wool Hosiery, John L. 

Fead & Sons, Port Huron, Michigan. 
Feen, Edward F., I, '21 (D).. Textile Engineer, Corning Glass Works, Corning, 

N. Y. 
Fell, Cecil, I, '30 (D). With Goodyear Tire Co., Akron, Ohio. 
Fen ton, Miriam A. F., S, '34 (C). Clerk, N. B. Dry Goods Co., New Bedford, 

Mass. 
Fessenden, Charles E., II, '14 (D). With Associated Sales Co., Inc., 1350 

Broadway, New York City, N. Y. 
Few, George P., VI, '17 (C). Superintendent Profile Cotton Mills, Jacksonville, 

Ala. 
Finnell, Everett G., Ill, '24 (D). Chemist, National Silk Spinning Co., New 

Bedford, Mass. 
Fish, Myron C, VI, '02 (D). Secretary, American Supply Company, and Treas- 
urer, Rhode Island Yarn Company, Providence, R. I. 
Flaherty, Matthew W., Ill, '22 (D). Clerk, Post Office, New Bedford, Mass. 
Flynn, Edmund K., I, '36 (D). With U. S. Testing Co., Chicago, 111. 
Forbes, Esley H., I, '02 (D). 

Foster, Edward J., I, '24 (D). V. S. Bureau of Standards, Philadelphia, Pa. 
Foster, James E., S, '22 (C). Instructor, Junior High School, New Bedford, 

Mass. 
Foster, John E., S, '29 (C). Instructor, New Bedford Textile School, New 

Bedford, Mass. 
Francis, George F., IV, '24 (C). Stationary Fireman, N. Y., N. H. & Hartford 

Railroad, New Bedford, Mass. 
Freeman, Elmer L., V, '06 (D). President and Manager, Freeman Manu- 
facturing Company, Detroit, Mich. 
Freeman, Leo, III, '20 (C). Chemical Engineer, Room 42, Reymond Bldg., 

Baton Rouge, La. 
French, Dean A., VI, '19 (C). Salesman, Gastonia Roller Flyer & Spindle Co., 

Gastonia, N. C. 
French, Morton T., IV, '12 (D). With Scott & Williams, Inc., 366 Broadway, 

New York City, N. Y. 
Freschl, Max A., IV, '09 (D). Vice-President Holeproof Hosiery Company, 

Milwaukee, Wis. 
Friedberg, Edward A., Ill, '30 (D). Assistant Dyer, Harodite Finishing Com- 
pany, North Dighton, Mass. 
Frodyma, John I., '33 (D). With Hathaway Mfg. Company, New Bedford, 

Mass. 
Frost, Irving B., Ill, '34 (D). Foreman, Arkwright Mills, Fall River, Mass. 
Fuller, Everert H., Ill, '17 (D). Assistant Superintendent, Hampton Company, 

Easthampton, Mass. 

Gallagher, John V., IV, '08 (D). 

Galligan, Francis B., IV, '31 (D). Fabric Development Dept., Goodyear Tire 
Company, Akron, Ohio. 

Gammons, Molly Nye, II, '18 (C). Mrs. Warren Tobey, Barrington, R. I. 

Gardner, George O., Jr., I, '31 (D). With J. S. Fallow & Company, New Bed- 
ford, Mass. 

Gast, Paul R., Ill, '16(C). 

Gatonska, Henry, IX, '33 (C). With Continental Wood Screw Co., New Bed- 
ford, Mass. 

Gay, Paul F., I, '10 (D). Overseer of Carding, Kendall Mills, New Bedford, 
Mass. 

Gentilhomme, Roger C. J., I, '33 (D). U. S. Bureau of Standards, Philadelphia, 
Pa. 

Geyer, Fred N., IX, '33 (C). With New Bedford Rayon Co., New Bedford, Mass. 



47 

Giante, Antone J., I, '34 (D). 

Gifford, Thomas T., I, '01 (D). With Pierce Manufacturing Company, New 

Bedford, Mass. 
Giguere, Laurence O., Ill, '36 (D). With Jeandros Dye & Print Works, New 

Bedford, Mass. 
Gillett, Thomas, I, '35 (D). With Nottingham Neckwear Co., New Bedford, 

Mass. 
Gillingham, Dana H., Ill, '10 (D). Cotton Merchant, 91 Union St., New 

Bedford, Mass., and New England Sales Manager, Delaware Rayon Co. 
Gilmore, Daniel R., I, '22 (D). Farmer, Acushnet, Mass. 
Gobeil, Norman B., Ill, '33 (D). With American Printing Co., Fall River, Mass. 
Goff, Russell E., VI, '15 (C). Cotton Broker, Boston, Mass. 
Goldberg, Bertram, IV, '13 (D). Treasurer, Bertram Goldberg, Inc., Silk Dyers, 

Johnstown, N. Y. 
Gonsalves, John P., IX, '32 (C). A. Gonsalves & Sons, Fairhaven, Mass. 
Goodell, Shirley M., IX, '36 (C). With Pratt & Whitney, Hartford, Conn. 
Goodwin, Albert W., II, '11 (D). New York City, N. Y. 
Gosselin, Henry J., S, '25 (C). Machinist, The New Departure Co., Bristol, 

Conn. 
Goulet, Henry J. O., I, '04 (D). 
Goward, Niles W., I, '15 (D). 
Grady, John H., Ill, '07 (D). Manager, John Campbell & Co., 99 Bedford St., 

Boston, Mass. 
Gray, Ralph B., Ill, '27 (C). In Laboratory, Vacuum Oil Company, Paulsboro, 

N.J. 
Greaves, John, Jr., Ill, '35 (D). Student, N. C. State College, Raleigh, N. C. 
Green, Charles H., S, '22 (C). Jersey Shore, Pa. 
Greene, Dan E., S, '18 (C). Electrician, Woonsocket Rubber Company, Mill- 

ville, Mass. 
Greenough, Herbert E., Ill, '36 (D). With DuPont Rayon Co., Richmond, Va. 
Grimshaw, Albert H., Ill, '16 (C). Associate Professor of Dyeing, North 

Carolina State College, Raleigh, N. C. 

Haarla, Rauno, A. V., I, '26 (D). Assistant Technical Director, o/y Suomen 

Trikootehdas, Tampere, Finland. 
Hadley, Wade H., VI, '00 (D). Secretary and Treasurer, Gregson & Dorsett, 

Siler City, N. C. 
Hahn, Louis H., II, '18 (D). Proprietor, Novelty Fabric Co., 1244 Acushnet 

Ave., New Bedford, Mass. 
Hale, Charles E., Jr., I, '22 (D). 24 Jason Street, Arlington, Mass. 
Hall, Ernest H., Jr., I, '34 (D). With Dartmouth Mfg. Corp., New Bedford, 

Mass. 
Hall, Gordon K., IX, '33 (C). With Union Street Railway Co., New Bedford, 

M!ass 
Hall! Lincoln, S, '14 (C). 
Hall, Walton, Jr., VI, '06 (D). Judge of Probate, District of East Haddam, 

Moodus, Conn. 
Hamasaki, Shunkichi, S, '30 (C). 
Hamer, Allan K., S, '15 (C). Boston, Mass. 

Hamlen, Carleton LeB., Ill, '11 (D). With Hood Milk Co., Boston, Mass. 
Hamlen, Walter G., Jr., Ill, '17 (D). Demonstrating Salesman, E. I. Dupont 

de Nemours & Co., 128 So. Front St., Philadelphia, Pa. 
Hamrick, Lyman A., VI, '20 (C). Superintendent and General Manager, 

Musgrove Mills, GafTney, S. C. 
Hanson, Charles F., Ill, '33 (D). With Farwell Bleachery, Lawrence, Mass. 
Hardy, Carl L., I, '36 (D). With Devonshire Mills, New Bedford, Mass. 
Hardy, Hudson E., I, '24 (D). Fabric Technician, Devonshire Mills Co., Inc.. 

425 Fourth Ave., New York, N. Y. 
Harney, Joseph J., I, '22 (D). Foreign Representative, Firestone Tire and 

Rubber Co., New Bedford, Mass. 



48 

Harper, Powhatan F., VI, '23 (C). Foreman of Yard Force, Receiving and 

Shipping Clerk, Cotton Classer, Spray Cotton Mills, Spray, N. C. 
Harrison, John, III, '36 (D). Fall River, Mass. 
Haskins, Ernest T., IX, '27 (C). Chauffeur, 57 St. Germain Street, Boston, 

Mass. 
Hathaway, Russell, I, III, '16 (D) (C). Manager Hathaway Laundry, New 

Bedford, Mass. 
Hathaway, William B., Jr., I, '35 (D). With Kendall Co., New Bedford, Mass. 
Hayden, Paul A., I, '25 (D). St. Thomas Hospital, Akron, Ohio. 
Hay ward, Caleb A., Jr., V, '11 (D). Salesman, C. A. Hayward & Son, Con- 
fectionery Agents, Brokers and Jobbers, New Bedford, Mass. 
Hayward, Harold W., I, '16 (D). With D. E. H. Chemical Co., 277 Highland 

Ave., Somerville, Mass. 
Heap, Harold, II, '23 (C). With Berkshire Fine Spinning Co., 40 Worth St., 

New York City, N. Y. 
Heath, Roger A., Ill, '23 (D). Assistant Colorist, Passaic Print Works, Passaic, 

N.J. 
Heinser, Alfred W., Jr., Ill, '35 (D) r . 119 High St., Portland, Me. 
Herstoff, Milton W., I, '35 (D). With Farr Alpaca Co., Holyoke, Mass. 
Herzog, Emil, IX, '34 (C). United Shoe Machinery, New Bedford, Mass. 
Hiller, Raymond N., Ill, '34 (D). With Goodyear Tire Co., Akron, Ohio. 
Hinckley, Frank E., Ill, '12 (D). Chief Pharmacist's Mate, United States 

Navy, c/o Bureau of Navigation, Washington, D. C. 
Hoffman, Frank A., VI, '24 (C). Designer, Gosnold Mills, New Bedford, Mass. 
Holden, Stuart, IX, '34 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Holland, Warren E., II, VI, '11 (D). Treasurer, Darlington Warehouse Com- 
pany, Box 96, Pawtucket, R. I. 
Hollas, James B., I, '25 (D). With Scheuer & Co., 72 Leonard St., New York, 

N. Y. 
Holmes, Leander, I, '27 (C). Assistant Supt., Tabardrey Mfg. Co.. Haw River, 

N. C. 
Holmstrom, Arthur C, IX, '34 (C). With Morse Twist Drill & Machine Co., 

New Bedford, Mass. 
Hood, John H., I, '25 (C). Assistant Treasurer, Bowling Green Spinning Mills, 

Blacksburg Spinning Mills, Globe Manufacturing Company, Clover, S. C. 
Horton, Harold W., I, '19 (D). Dealer in New and Used Textile Machinery, 

Room 438, 49 Westminster St., Providence, R. I. 
Horvik, Sigurd, IV, '22 (D). Superintendent, a/s Salhus Tricotage-fabrik, 

Salhus, near Bergen, Norway. 
Hotte, George H., Ill, '32 (D). Textile Microscopist, Cuyahoga Falls, Ohio. 
Houth, Joseph, Jr., Ill, '24 (D). Superintendent, Clearwater Mfg. Co., Clear- 
water, S. C. 
Howard, Arthur F., Jr., I, '25 (D). With Nonquitt Mills, New Bedford, Mass, 
Howarth, Robert, IX, '35 (D). With John I. Paulding, Inc., New Bedford,' 

Mass. 
Howell, H. Comer, VI, '23 (C). With Bibb Mfg. Co., Macon, Ga. 
Howland, Kempton S., Ill, '32 (D). With New Bedford Rayon Co., New 

Bedford, Mass. 
Howland, Ralph S., I, '13 (D). Purchasing Agent, Kendall Company, Walpole, 

Mass. 
Howland, Stewart M., Ill, '35 (D). New Bedford, Mass. 
Hoxie, Mildred, S, '32 (C). With Kilburn Mill, New Bedford, Mass. 
Hsaio, Chen H., VI, '22, 1, '25 (C). Hunan First Cotton Mill, Changsha, Hunan, 

China. 
Hsu, Yeisham, I, '25 (D). 
Hung, Shao-Yu, III, '16 (C). 

Hunt, Russell W., Ill, '21 (C). Dyer, Franklin Process Co., Philadelphia, Pa. 
Hurley, James K., I, '24 (D). With Southeastern Cottons, Inc., 58 Worth St., 

New York City, N. Y. 
Hutchinson, John J., I, '02 (D). Laundry Proprietor, Los Angeles, Cal. 



49 

Hynes, Thomas, S, '33 (C). With Morse Twist Drill & Machine Co., New 
Bedford, Mass. 

Ing, David P. E., Ill, '24 (D). With Shantung Silk & Lace Co., Ltd., 865 Sui- 
pacha, Buenos Aires, Argentine, S. A. 

Jackson, S. Eugene, VI, '07 (D). Assistant Treasurer, Crown Manufacturing 

Company, Pawtucket, R. I. 
Jasionek, Frank, IX, '35 (C). With Revere Copper & Brass Co., New Bedford, 

Mass. 
Jay, A. Sidney, S, '21 (C). Assistant to the Agent, The W. A. Handley Mfg. Co., 

Roanoke, Ala. 
Jenks, Raymond M., I, '15 (D). Cost Clerk, West Boylston Manufacturing 

Company, Easthampton, Mass. 
Jenks, Robert R., VI, '11 (C). President Fales & Jenks Machine Company, and 

Treasurer Woonsocket Machine & Press Company, Woonsocket, R. I. 
Jennings, Everett C, III, '26 (D). With Arkwrigtit Co., Fall River, Mass. 
Jennings, Harold W., S, '21 (C). 55 Court Street, New Bedford, Mass. 
Jewell, Robert H., Ill, '20 (C). Treasurer, Crystal Springs Bleachery Compam^ 

Chickamauga, Ga. 
Johnson, Horace E., Ill, '16 (C). Chemist, Bell Telephone Laboratories, 463 

West Street, New York City, X. Y. 
Johnson, J. Earle, III, '35 (D). Student, North Carolina State College, Raleigh, 

N. C. 
Jones, Louis, S. '23 (C). 35 Elm Street, New Bedford. Mass. 
Jourdain, Henry M., I, '18 (D). Letter Carrier, Post Office, New Bedford, Mass. 
Joy, Walter, III, '25 (C). Factory Manager, Bristol Mfg. Co., Bristol, R. I. 
Judge, Edward E., I, '12 (D). Overseer, Gosnold Mills Company, New Bedford, 

Mass. 
Judson, David H., IV, '34 (D). With Hitchcock & Curtiss Knitting Co., Nashua, 

N. H. 

Kagan, Peter M., VI, '24 (C). With Walter Simpson, Inc., 42 South Water St., 

Providence, R. I. 
Kallish, Frank, I, '11 (D). Designer, Utica Steam & Mohawk Valley Cotton 

Mill, Utica, N. Y. 
Kanter, Harry, I, '23 (D). Designer, Toepher & Myers, 4 and 6 White St., New 

York City, N. Y. 
Karl, Roger T., I, '30 (D). With Firestone Cotton Mills, New Bedford, Mass. 
Karl, William A., I, '19 (D). Purchasing Agent, Firestone Tire & Rubber 

Company, Akron, Ohio. 
Kean, George P., II, '04 (D). Superintendent, Nyanza Mills, Woonsocket, R. I. 
Keith, Wendell T., IX, '35 (C). With Baker Machine Co., New Bedford, Mass. 
Kelty, Pharus T., I, '20 (C). 

Kershaw, James E., IX, '34 (C). 13. S. Army, Fort Devens, Mass. 
Kestenbaum, Irving, IX, '36 (C). New Bedford, Mass. 
Ketcham, Melville K., S, '21 (C). General Manager, Wellington Sears Co., 

258 So. 18th St., Philadelphia, Pa. 
Kiluk, Kasimierz, IX, '33 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Kinney, C. Stanley, I, '15 (D). Manager, Troy Laundry Company, 183 Ex- 
change St., Pawtucket, R. I. 
Kirschbaum, Erwin P., Ill, '26 (C). With New Bedford Gas & Edison Light 

Co., New Bedford, Mass. 
Ko, Thomas S., S, '20 (C). Engineer, Textile Department, Anderson, Meyer & 

Co., Ltd., Shanghai, China. 
Kolodny, Meyer Z., S, '21 (C). Machine Fixer, Allen & Co., Black Cat Hosiery 

Mills, Kenosha, Wis. 
Kolodziey, Joseph, I, '24 (D). With Hathaway Manufacturing Co., New 

Bedford, Mass. 



50 

Kravetz, Joseph, VI, '25 (C). With Fix-Rite Shoe Stores, H. Kravetz & Son, 

343^ Cedar & 54 Mt. Vernon Sts., New Bedford, Mass. 
Kroudvird, William, III, '32 (D). Kroudvird's Bakery, New Bedford, Mass. 
Krumholz, George B., Jr., Ill, '36 (D). Taking Post Graduate Work at 

N. B. Textile School. 
Kuczewski, Eugene J., II, '33 (D). New Bedford, Mass. 
Kuwaski, Francis A., I, '34 (D). New Bedford, Mass. 
Kwan, Sze Keen, I, '24 (D). Sales Manager, Full-Moon Knitting Factory, 

Shanghai, China. 
Kwok, Taai W., I, '26 (D). With Wing On Textile Mfg. Co., Nanking Road, 

Shanghai, China. 

Labrode, Henry C, I, '11 (D). Pawtucket, R. I. 

Lacerda, Armando, IX, '36 (C). With John I. Paulding, Inc., New Bedford, 
Mass. 

Lachance, Edgar, I, '32 (D). Designer, Powdrell & Alexander Co., Danielson, 
Conn. 

LaCosta, Joaquim, III, '30 (D). Interne, Boston City Hospital, Boston, Mass. 

Ladino, John M., Ill, '29 (D). Chemist, Diamond Alkali Co., Painesville, 
Ohio. 

Lafferty, Edward C, III, '32 (D). With Pacific Mills, Lawrence, Mass. 

Lague, James C, III, '33 (D). With Taunton Oil Cloth Co., Taunton, Mass. 

Lane, Daniel A., S, '23 (C). New Bedford, Mass. 

Languirand, Marcel J., IX, '35 (D). New Bedford, Mass. 

Lassow, Samuel, II, '29 (D). Inspector of Textiles in Quartermasters' Corps, 
U. S. Army, Philadelphia, Pa. 

Law, Kwok L., I, '24 (D). Hong Kong, China. 

Leahy, William T., Jr., I, '36 (D). With Revere Copper & Brass, Inc., New 
Bedford, Mass. 

Le Beau, Emil C, III, '30 (D). With National Aniline & Chemical Co., Buffalo, 
N. Y. 

Lee, J. K. Theodore, VI, '23 (C). Supply Department, Peking-Mukden Rail- 
way Line, Tientsin, China. 

Lee, Sik C, I, '25 (D). With Wing On Textile Manufacturing Co., Ltd., Shanghai, 
China. 

Lee, Tung H., VI, '24 (C). Vocational School, Wuhu, China, or 29 S Sing Shung 
Li. Dela Tour, Shanghai, China. 

Lee, William A., I, '07 (D). Clerk, Mills Manufacturing Company, Greenville, 
S. C. 

Lenhart, Edmund, III, '16 (C). Proprietor, Lenhart's Pharmacy, New Bed- 
ford, Mass. 

Levovsky, George A., Ill, '27 (D). New Bedford, Mass. 

Levy, Henry M., S, '21 (C). With the Everwear Hosiery Company, Milwaukee, 
Wis. 

Lewis, Don C. C, S, '17 (C). Automobile Salesman, Westport, Mass. 

Lewis, Maurice A., Ill, '13 (D). With Doe & Ingalls, 198 Milk St., Boston, 
Mass. 

Lewis, Richard H., Ill, '35 (D). Student, North Carolina State College, Raleigh, 
N. C. 

Lewis, William C. T., I, '22 (D). Assistant Superintendent, Westport Manu- 
facturing Co., Westport Factory, Mass. 

LiKung, I, '07 (D). Professor of the National Institute of Technology, Peiping, 
China. 

Liebmann, Robert E., Jr., II, '25 (C). With A. Steinam Co., Inc., 114 Bleecker 
St., New York City, N. Y. 

Lincoln, Edward A., S, '30 (C). New Bedford, Mass. 

Lindberg, Herbert A., I, '32 (D). Automobile Salesman, New Bedford, Mass. 

Linderson, Carl A., I, '21 (D). Overseer, Card Room, Devon Mills, New Bed- 
ford, Mass. 

Lipsett, Leon, I, '36 (D). Baraboo, Wis. 

Lipson, Edward, S, '21 (C). 



51 

Livesey, Benjamin, Jr., Ill, '11 (D). 

Livesley, Howard P., IX, '34 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Livingstone, Joseph A., S, '14 (C). Clerk, Wamsutta Mills, New Bedford, Mass. 
Lo, Ting Y., I, '07 (D). Dean and Professor of Textile Dept. of Technical College 

(Sect. I) of Peking University; Managing Director of Kai Yuen Woolen & 

Carpet Factory, Peking, China. 
Lobley, Fay G., I, '24 (D). New Bedford, Mass. 
Lock, Robert F. K., I, '20 (D). Erecting Engineer, Wah Chang Trading Corp., 

(Sole Agents for Woonsocket Textile Machinery), P. 0. Box 1178, Shanghai, 

China. 
Lonergan, David J., II, '16 (C). With Federated Textiles, Inc., 30 Varick St., 

New York City, N. Y. 
Lopes, Joseph S, '31 (C). 87 Acushnet Avenue, New Bedford, Mass. 
Loring, Andrew C, I, '26 (D). With Devon Mills, Inc., New Bedford, Mass. 
Loud, Everett C, I, '27 (D). Utility Man, Lorraine Mfg. Company, Pawtucket, 

R. I. 
Lovejoy, Charles F., IX, '36 (C). Fairhaven, Mass. 
Lowther, John M., I, '24 (D). Representative of Chas. A. Schieren Co., 146 

Smith St., New Bedford, Mass. 
Luce, Bradford A., I, '22 (D). With Fiske Rubber Co., Chicopee Falls, Mass. 
Lynam, Ralph L., IX, '32 (C). With Fibro Products Co., New Bedford, Mass. 

MacColl, William B., II, '05 (D). President, Lorraine Manufacturing Co., 
Pawtucket, R. I. 

Macia, William F., I, '28 (D). With Throwsters Research Institute, Inc., 
468 Fourth Ave., New York, N. Y. 

MacKenzie, John A., II, '07 (D). Alcohol Unit of Internal Revenue, U. S. 
Government. 

Macy, Andrew W., I, '07 (D). Treasurer, Taber Mill, New Bedford, Mass. 

Macy, Edwin H., I, '23 (D). President, Macy Manufacturing Co., 95 Court St., 
New Bedford, Mass. 

Madero, Alberto, S, '02 (C). 

Mainville, Alfred J., II, '22 (D). Supt. of Weaving, Brupbacker Silk Mills, 
Ltd., Valleyfield, P. Q., Canada. 

Malick, Albert, III, '33 (D). With Colloids, Inc., 16 Delaney St., Newark, N. J. 

Manning, Lewis G., V, '10 (D). Utica, N. Y. 

Marriott, Frederick A., I, '26 (D). With Thermord Rubber Co., Trenton, N. J. 

Martel, Henri, S, '29 (C). Ave La Paz 699, Guadalajara, Mexico. 

Martins, Antonio R., S, '20 (C). New Bedford, Mass. 

Mason, Joseph E., If, '23 (C). 

Matthews, Irving F., I, '25 (C). Salesman, 227 Union St., Room 510, New 
Bedford, Mass. 

Maxfield, Linden H., I, '26 (D). Designer, Lorraine Manufacturing Co., Paw- 
tucket, R. I. 

McArdle, William F., Ill, '33 (D). With Norschner Dye Works, Newton, Mass. 

McCann, William M., Ill, '26 (D). 

McCraw, French Z., S, '26 (C). With The Irene Mills, Gaffney, S. C. 

McDevitt, Francis O., I, '22 (C). Salesman, Heinman and Seidman, New 
York, N. Y. 

McDonald, Thomas J., Ill, '27 (D). Chemist, United Merchants and Manu- 
facturers Laboratory, Langley, S. C. 

McEvoy, Leo A., S, '22 (C). With Knitted Padding Co., 105 Chapman St., 
Canton, Mass. 

McEvoy, Raymond R., I, '19 (C). Assistant Superintendent, The Knitted 
Padding Co., Canton, Mass. 

McEwen, Ellsworth S., S, '18 (C). With Eastern Exchange Bank, 37 Broad- 
way, New York City, N. Y. 

McGaughey, Arthur E., IX, '32 (C). With Continental Wood Screw Co., New 
Bedford, Mass. 



52 

McGinn, Walter E., Ill, '17 (D). Sales Engineer, 29 Shawmut Ave., Mansfield, 

IVIass 
Mclsaac, Harold J., I, '19 (D). 213 Court St., New Bedford, Mass. 
McKnight, John D., I, '22- (C). Converter, Nuess, Hesslein & Co., Inc., 53 

White St., New York City, N. Y. 
McMullen, Francis E., I, '36 (D). With Pacific Mills, Rayon Div., Lawrence, 

Mass. 
McNeely, Thomas J., II, '01 (C). Supt., Rhodes-Rhyme Mfg. Co., Lincolnton, 

N. C. 
Meagher, Gregory F., V, '29 (D). State Milk Inspector, Boston, Mass. 
Mello, Frank, IX, '34 (C). With Morse Twist Drill & Machine Co., New Bed- 
ford, Mass. 
Mendrala, Aloysius, I, '31 (D). With Lorraine Mfg. Company, Pawtucket, 

R.I. 
Mercer, George C, Jr., Ill, '22 (C). With Milbank Bleachery, Lodi, N. J. 
Mikus, Frank J., Ill, '33 (D). With American Printing Co., Fall River, Mass. 
Miller, Wallace J., I, '22 (D). Assistant Superintendent and Cotton Classer, 

Crown Manufacturing Co., Pawtucket, R. I. 
Mills, Clayton W., I, '26 (C). With Machinery Liquidating Co., 33 West 42nd 

St., New York City, N. Y. 
Mills, Otis P., Jr., I, '05 (D). Automobile Distributor and Real Estate, Augusta 

St., Greenville, S. C. 
Mitchell, George T., I, '36 (D). With U. S. Testing Co., New York, N. Y. 
Molins, Andres, II, '28 (C). Designer, 1 Calle Poniente No. 41, San Salvador, 

Moore, Carroll C, i, '27 (D). New Bedford, Mass.' 

Moore, Stephen R., II, '13 (D). With Philadelphia Steel Heddle Manufacturing 

Co., Philadelphia, Pa. 
Moore, William H., S, '22 (C). Twister Section Hand, A. M. Smyre Mfg. Co., 

Gastonia, N. C. 
Morris, David H., S, '31 (C). 571 East 140th Street, New York City, N. Y. 
Morris, Edith A., S, '33 (C). With Wamsutta Mills, New Bedford, Mass. 
Morris, Theodore P., VI, '19 (C). Superintendent, Ridge Mills, Inc., Gastonia, 

N. C. 
Morrison, Julian K., VI, '20 (C). President, Brighton Mills, Passaic, N. J. 
Morse, Alice L., II, '22 (C). 
Morton, Phillips T., Ill, '32 (D). With Glenlyon Print Works, Phillipsdale, 

R.I. 
Morton, Walter E., VI, '23 (C). Cotton Classer and Overseer of Carding, 

Lafayette Cotton Mills, Inc., Lafayette, Ala. 
Moss, Milo, L., VI, '01 (D). New Bedford, Mass. 
Muggleton, A. Lincoln, IX, '34 (C). With Morse Twist Drill & Machine Co., 

New Bedford, Mass. 
Mullarkey, Joseph F., Jr., I, '26 (D). With Jeandros Dye & Print Works, Inc., 

New Bedford, Mass. 
Mung, Theodore C, S, VI, '22 (C). 
Munroe, John F., Jr., Ill, '33 (D). With Bates Mfg. Company, Lewiston, 

Maine. 
Murley, John A., S, '34 (C). Fairhaven, Mass. 
Murphy, Edward L., Jr., IV, '26 (C). Assistant Instructor, New Bedford 

Textile School, New Bedford, Mass. 
Murphy, Edward M., Jr., Ill, '34 (D). With Clearwater Mfg. Co., Clearwater, 

S. C. 
Myers, Frederick H., Ill, '26 (D). With Windsor Print Works, No. Adams, 

Mass. 

Nash, Howard P., Jr., Ill, '25 (C). With Prosperity Co., Syracuse, N. Y. 
Neel, Albert G., V, '09 (D). Assistant Manager, Nazareth Waist Company, 

Nazareth, Pa. 
Nelme, Bennett D., II, '03 (D). Lumber and Farming, Wadesboro, North 

Carolina, Rt. No. 2. 



53 

Nelson, James A., II, '22 (C). With Wabasso Cotton Co., Trois Rivieres, 
Quebec, Canada. 

Nichols, Henry W., II, '00 (D). Principal, Bradford Durfee Textile School, 
Fall River, Mass. 

Normile, Joseph W., V, '35 (D). Student, Kinyon's Commercial School, New 
Bedford, Mass. 

Norris, Thomas L., Ill, '28 (D). With New Bedford Rayon Co., New Bedford, 
Mass. 

Northrop, William F., I, '16 (C). Salesman, Hopedale Manufacturing Com- 
pany, Milford, Mass. 

Northway, Ralph L., Ill, '31 (D). 167 Center Ave., Middleboro, Mass. 

Novick, Joseph B., Ill, '25 (D). With John Hancock Insurance Co., New 
Bedford, Mass. 

O'Brien, John N., Jr., S, '21 (C). Mattress Manufacturer, Comfortress Co., 

New Bedford, Mass. 
O'Brien, Thomas B., VI, '11 (C). O'Brien Padawer, Inc., Cotton Waste and 

Linters, 202 W. 40th St., New York City, N. Y. 
O'Brien, William L., S, '15 (C). Retail Liquor Store, New Bedford, Mass. 
O'Donnell, Thomas J., I, '26 (D). Fitchburg, Mass. 
Ogden, William H., Ill, '18 (D). With Watson-Park Co., 470 Atlantic Ave., 

Boston, Mass. 
O'Neil, John J., V, '06 (D). Optician, 389 Main St., Springfield, Mass. 
Orr, Charles F., Jr., I, '25 (C). Product Development Dept., Mansfield Tire and 

Rubber Company, Mansfield, Ohio. 
Osborn, John W., I, '02 (D). 
Oscar, Jack P., S, '25 (C). 
Othote, Gilbert A., II, '30 (D). Designing Dept., Haywood Mackey & Valentine, 

281 Adelphie St., New York City, N. Y. 
Owers, Mary M., VII, '34 (C). 50 Bedford St., New Bedford, Mass. 

Paine, Howard N., S, '21 (C). Mason 33 High School Road, Hyannis, Mass. 

Pakula, Frank, I, '29 (D). With Butler Mill, New Bedford, Mass. 

Pallatroni, Paul J., I, '25 (D). With Kilburn Mill, New Bedford, Mass. 

Palmer, Myrtland F., I, '13 (D). With Irving Trust Co. (Receivership Divi- 
sion), 233 Broadway, New York City, N. Y. 

Pan, Chen C, III, '16(C). 

Papademetrius, Demetrius, S, '21 (C). Textile Designer, Hathaway Mfg. Co., 
New Bedford, Mass. 

Papageorge, George, IV, '23 (D). Tester, Scott & Williams, Laconia, N. H. 

Papkin, Nathan, IV, '26 (D). New Bedford, Mass. 

Paradis, Joseph L., Ill, '25 (D). Sales Manager, Ohio Fuel Gas Co., Elyria, Ohio. 

Parkin, James E., Ill, '36 (D). Chemist, New Bedford Rayon Co., New Bed- 
ford, Mass. 

Parkinson, Charles R., Ill, '36 (D). Student, N. C. State College, Raleigh, 
N. C. 

Patt, Lester D., II, '08 (D). Claim Agent, United States Finishing Company, 
40 Worth St., New York City, N. Y. 

Payne, James E., II, '30 (D). New Bedford, Mass. 

Pease, Bryden, S, '14 (C). With Hazlip, Hood Cotton Company. Greenville, Miss. 

Peavey, Robert F., IX, '28 (C). 160 Broad St., Providence, R. I. 

Peirce, Everett S., Ill,, '31 (D). With Cheney Bros., So. Manchester, Conn. 

Peitavino, Americo, l/'29 (D). New Bedford, Mass. 

Perez, Alfonso, S, '23 (C). Owner, St. Pedro Cotton Mill, Octavalo, Ecuador, 
S. A. 

Perez, Gonzalo B., I, '30 (D). Manager of a Mill, P. O. Box 431, Quito, Ecuador, 
S. A. 

Pernelet, Gerard L., S, '30 (C). With Hathaway Machinery Company, Fair- 
haven, Mass. 

Perrier, Gustave D., IV, '30 (D). With The National Silk Co., South Coventry, 
Conn. 



54 

Perry, Allan M., I, '25(D). 

Perry, Dorothea S., S, '30 (C). With Roxbury Carpet Co., Roxbury, Mass. 

Perry, Henry J., Jr., Ill, '35 (D). With American Insurance Co., 316 Huntington 

Ave., Boston, Mass. 
Peters, Aubrey R., S, '30 (C). Overseer of Carding, Stormont Mill, Canadian 

Cotton, Ltd., Cornwall, Ontario, Canada. 
Peterson, Henry F., Ill, '22 (D). With Amoskeag Mfg. Co., Manchester, N. H. 
Phinney, Richard B., IX, '32 (C). With Atlas Tack Co., Fairhaven, Mass. 
Pickard, Walter D., I, '17 (D). 
Pickering, William A., IX, '34 (C). 
Pien, Ting K., I, '22 (C). 
Pierce, Clifton S., I, '29 (D). Director of Testing Laboratory, Abraham & 

Straus, Inc., Brooklyn, N. Y. 
Pilkington, Arthur H., I, '36 (D). With Clearwater Mfg. Co., Clearwater, S. C. 
Pilkington, James, III, '29 (D). With Clearwater Mfg. Co., Clearwater, S. C. 
Pinault, Robert W., Ill, '24 (D). On Technical Staff of Warwick Chemical 

Co., West Warwick, R. I. 
Pittle, Charles, IV, '09 (D). Importer, 1817 Acushnet Ave. (Chas. Pittle & 

Co.), New Bedford, Mass. 
Ponte, John V., IX, '33 (C). 
Poremba, Alfred, II, '31 (D). Designer, Scheuer & Company, 72 Leonard St., 

New York City, N. Y. 
Potel, Jacques M. L., I, '31 (D). Cotton and Cotton Waste Dealer, 9 Rue de 

Sotteville, Rouen, France. 
Potter, Benjamin R., II, '28 (D). Designer, Enro Shirt Co., Louisville, Ky. 
Pressman, Jacob L., I, '24 (D). General Manager, Orkin Exterminating Co., 

Inc., 1128 Elizabeth Ave., Charlotte, N. C. 
Prokuski, Stanley A., I, '30 (D). 

Quinn, Francis J., IX, '27 (C). New Bedford, Mass. 

Radway, Charles A., Ill, '28 (D). 103 Commonwealth Ave., Chestnut Hill, 

Mass. 
Ragan, Caldwell, VI, '19 (C). Secretary and Assistant Treasurer, Ragan Spin- 
ning Company, Gastonia, N. C. 
Ramos, Edwin C, III, '25 (D). New Bedford, Mass. 
Ramsbottom, Archie, IV, '24 (D). 
Rankin, William T., VI, '19 (C). Gastonia, N. C. 
Rawcliffe, George A., Ill, '29 (D). Insurance, Reed Road, No. Dartmouth, 

Mass. 
Reed, Francis B., Ill, '21 (D). Wareham, Mass. 
Regan, Carlton E., Ill, '28 (C). New Bedford, Mass. 
Remington, Allen K., I, '20 (D). With J. & P. Coats (R. I.), Inc., Pawtucket, 

R.I. 
Reynolds, Philip E., Ill, '34 (D). In laboratory, Sears, Roebuck, Chicago, 111. 
Richards, Benjamin, VI, '02 (D). Manager, Underwriters' Service Association, 

175 West Jackson Blvd., Chicago, 111. 
Richardson, Malcolm H., I, '26 (D). Assistant Instructor, New Bedford 

Textile School, New Bedford, Mass. 
Riding, Richard, S, '01 (C). 

Rigby, Christopher E., Jr., I, '23 (C). With Dupont Rayon Co., Richmond, Va. 
Rigby, James H., VI, '25 (D). Technical Sales Service Dept., DuPont Rayon 

Company, Empire State Bldg., New York City, N. Y. 
Riley, George V., Ill, '16 (C). Manager, Hotel New Yorker, New York, N. Y. 
Rioux, Bernard, III, '36 (D). With Glenlyon Yarn Dye Works, Phillipsdale, 

R. I. 
Ripley, Raymond, IX, '34 (C). Machinist, Maxam's Machine Co., Bridgeport, 

Conn. 
Rivero, Richardo J., VI, '04 (D). Monterey, Mexico. 
Robbins, Lloyd B., Ill, '20 (D). Onset, Mass. 
Robenolt, Edward A., II, '11 (D). 23 Sycamore St., New Bedford, Mass. 



55 

Robinson, Arthur J., Ill, '17 (D). In Charge of Sulphuric Acid Plant, Rum- 
ford Company, Rumford, R. I. 
Robinson, Chester A., I, '22 (D). Principal, Belmont, Mass. 
Robinson, Joseph L., S, '23 (C). New Bedford, Mass. 

Robinson, Raymond W., I, '26 (D). With L. G. Balfour Company, Ithaca, N. Y. 
Rocheleau, M. Violet, II, '35 (D). With Pairpoint Corp., New Bedford, Mass. 
Rodalewicz, Henry F., IX, '28 (C). Die Maker, John I. Paulding, Inc., New 

Bedford, Mass. 
Rqessle, Alfons U., IX, '33 (C). United States Navy, Norfolk, Va. 
Ronne, Arthur H., I, '17 (D). Accountant in Yarn Department, Celanese Corp. 

of America, 180 Madison Ave.', New York City, N. Y. 
Rooney, Harold E., I, '26 (D). Foreman, Berkshire Manufacturing Company, 

Depot St., Adams, Mass. 
Ross, Edward J., I, '23 (D). 230 St. James Place, Brooklyn, N. Y. 
Rossi ter, Laurence E., I, '34 (D). With United Rayon Mills, Fall River, Mass. 
Rothkopf , Hyman D., I, '36 (D). 
Rothkop, Max, III, '32 (D). New Bedford, Mass. 
Rowan, Peyton, VI, '20 (C). Cotton Buyer, J. G. Boswell, 524 Roberts Building, 

Los Ar 2tp1ps C&l 
Royster, DavidW., IV, '16 (C). Manager Royster Oil Co., Inc., Shelby, N. C. 
Rubin, Juan D., I, '24 (D). Textile Engineer, Parks-Cramer Co., Fitchburg, 

Mass. (Territory for Supervision Mexico and South America.) 
Rubinstein, Isaac, III, '27 (D). 410 Ocean Parkway, Brooklyn, N. Y. 
Ruffley, Kenneth, I|X, '36 (C). With Hathaway Machinery Co., Fairhaven, 

Mass. 
Ruggles, John W., I, '20 (D). Cotton Twine Manufacturer, 94 Sawyer St., 

New Bedford, Mass. 

Said, Antonio, I, '31 (D). Said & Yarur, La Paz, Bolivia. 
St. Louis, Adrian, S, '31 (C). 17 Jouvette Street, New Bedford, Mass. 
Salter, Milton B., Ill, '19 (C). With Brooklyn Edison Co., Brooklyn, N. Y. 
Salvati, Salvato, I, '20 (D). Delicatessen Shop, New Bedford, Mass. 
Sanders, Stanley G., Ill, '31 (D). Assistant Chemist, Dutchess Bleachery, 

Wappinger's Falls, N. Y. 
Sayers, William J., I, '23 (D), III, '25 (D). Manchester, N. H. 
Scaccia, Albert N., Ill, '30 (D). With Arkansas Co., 233 Broadway, New 

York City, N. Y. 
Scharf, Elmer, III, '22 (D). Chemist and Dyer, Holeproof Hosiery Company, 

Milwaukee, Wisconsin. 
Scheid, Alfred, VI, '11 (C). Bond Salesman, Clarence Hodson & Co:, New 

York City, N. Y. (Clinton, Mass.) 
Schiller, Wesley L., I, '23 (D). Assistant to Superintendent, Lebanon Mill Co., 

Pawtucket, R. I, 
Schofield, George L., Ill, '28 (D). Superintendent, Grasselli Chemical Co., 

Detroit, Mich. 
Scholze, Ernest A., II, '12 (D). 520 Allen St., New Bedford, Mass. 
Schoop, Hans, S, '22 (C). With Rose Manufacturing Co., Philadelphia, Pa. 
Schulman, Otto, II, '26 (C). Assistant Weaving Manager, Finlayson & Co., 

Tammerfors, Finland. 
Searell, George W., Ill, '22 (D). Sales Service, Jacques Wolf & Co., Passaic, 

N.J. 
Searls, Albion K., I, '27 (C). Overseer of Carding, Berkshire Fine Spinning 

Associates, Inc., Adams, Mass. 
Service, Louis B., S, '20 (C). Superintendent, The Gardiner Hall Jr. Co>, South 

Willington, Conn. 
Shanks, James, Jr., Ill, '19 (D). Service Man, Morningstar Nicol, Inc., 630 

West 51st St., New York City, N. Y. 
Shaw, Adam J., I, '30 (D). Boston, Mass. 

Sherman, Charles E., I, '35 (C). With Brookside Mills, Knoxville, Tenn. 
Sherman, Henry F., Ill, '35 (D). With Pontiac Finishing Plant, Pontiac, R. I. 
Shill, Alexander, I, '15 (D). Shill Brothers, 463 7th St., New York City, N. Y. 



56 

Shoczolek, Walter P., I, '34 (D). New Bedford, Mass. 
Shumway, Orsman A., Ill, '35 (D). Atlas Tack Corp., Fairhaven, Mass. 
Silva, Albert D'A., II, '34 (D). With Gosnold Mills Co., New Bedford, Mass. 
Silva, Americo O., I, '24 (D). Assistant Manager, 11118 Merchandise Mart, 

Chicago, 111. 
Simmons, Charles G., S, '22 (C). Woodworking Teacher, Public Schools, 

New Bedford, Mass. 
Singer, Meyer K., I, '21 (D). With John Campbell Co., Newark, N. J. 
Siu, Poy N., I, '23 (C). 5 Lower Castle Road, Hong Kong, China. 
Smith, Carlton W., Ill, '11 (D). Clerk, Drift Road, South Westport, Mass. 
Smith, George F., Ill, '32 (C). New Bedford, Mass. 
Smith, James C, VI, '23 (C). 
Snedden, George A., VI, '20 (C). Cotton Salesman, William Almy & Co., New 

Bedford, Mass. 
Snell, Elliott A., I, '27 (C). With United Rayon Co., Fall River, Mass. 
Snyder, Arthur E., V, '09 (D). President Berkshire Moccasin Co., Holliston, 

Mass., and Worsted Yarn Salesman, Percy A. Legge, 185 Summer St., Boston, 

M!ass. 
Soler, Juiius A., I, '28 (D). 

Sotnick, George, IV, '22 (D). Machinery Fixer, Pawtucket Hosiery Com- 
pany, Pawtucket, R. I. 
Soucy, Trefton A., IX, '36 (C). With Metropolitan Life Insurance Co., New 

Bedford, Mass. 
Spare, Arthur F., I, '09 (D). With J. V. Spare & Co., New Bedford, Mass. 
Spencer, William A., VI, '04 (D). Superintendent, Trainer Mills of Martel 

Mills, Inc., Chester, Pa. 
Stasiun, Henry F., S, '29 (C). New York City, N. Y. 

Stevens, Bradford T., Ill, '31 (D). Chemist, Wilson Company, Providence, R. I. 
Stowell, Edgar D., Ill, '35 (D). With Edwards Mfg. Co., Augusta, Maine. 
Strahoska, Statia, S, '33 (C). With Nottingham Neckwear Co., New Bedford, 

Mass. 
Stubbs, Guy P., '01 (C). Manager of an estate, Monroe, La. 
Sturtevant, Harold B., Ill, '15 (D). Supt. of Bleachery, American Printing 

Co., Fall River, Mass. 
Sullivan, Charles J., Ill, '28 (D). With Pacific Mills, Lawrence, Mass. 
Sullivan, Daniel F., Jr., I, '29 (D). With Firestone Cotton Mills, New Bedford, 

M^ass. 
Sullivan/Edward H., IX, '33 (C). With Pratt & Whitney, Hartford, Conn. 
Sun, Chiating, I, '25 (D). Textile Engineer, Lu Foong Cotton Mill, Ching- 

chow, Ho-Nan, China. 
Sweeney, Eugene F., I, '22 (D). Head of Quality and Production, Firestone 

Tire & Rubber Co., Fall River and New Bedford, Mass. 
Swenson, Hilary S., Ill, '19 (C). Chemist, Morse Twist Drill & Machine Co., 

New Bedford, Mass. 
Sylvester, Burton C, III, '18 (D). With Farwell Bleachery, Lawrence, Mass. 
Sylvia, Frederick W., I, '34 (D). With Neild Mfg. Corp., New Bedford, Mass. 
Szulik, Raymond W., Ill, '36 (D). Student, N. C. State College, Raleigh, N. C. 
Szynal, Frank J., I, '35 (D). With Sidney Blumenthal & Co., Shelton, Conn. 

Taber, Dorothy C, S, '32 (C). Office Clerk, N. B. Dry Goods Co., New Bed- 
ford, Mass. 

Taylor, Charles K., VI, '04 (D). Textile Engineering, P. O. Box 187, Magnolia, 
Miss. 

Taylor, Fred, I, '04 (D). American Commissioner of Agriculture, Shanghai, 
China. 

Terry, Clifford B., VI, '04 (D). Salesman, Foster Machine Co., Westfield, Mass. 

Tetrault, Albert H., Jr., I, '35 (D). With National Silk Spinning Co., New 
Bedford, Mass. ■ 

Thayer, Ellis H.,V, '07(D). 

Thornley, Clifton L., I, '22 (D). Shoe Retailer, Walk-Over Shoe Store, 342 
Westminster St., Providence R. I. 



57 

Tom, George K. Y., I, '25 (D). With Honolulu Advertiser, Honolulu, Hawaii. 
Tomasik, A. Theodore, III, '32 (D). With Revere Copper and Brass, Inc., 

New Bedford, Mass. 
Tourtellot Pierce D., VI, '13 (C). Agent for Brown & Bigelow, New Bedford, 

Mass. 
Tripp, Clifford H., I, '05 (D). Inspector of Textiles, Q. M. C, Boston General 

Intermediate Depot, Boston, Mass. 
Tripp, Francis, III, '28 (D). With E. L. Patch Company, Stoneham, Mass. 
Tripp, Fred R., Ill, '28 (D). With Mount Hope Finishing Co., North Dighton, 

M!ass. 
Tripp, Kenneth S., IX, '28 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Trott, George R., I, '24 (C). Clerk, J. & P. Coats (R. I.), Inc., Pawtucket, R. I. 
Truesdale, William P., Ill, '24 (D). U. S. Finishing Co., Providence, R. I., 

Shver Springs Branch. 
Tsang, Yiu S., I, '07 (D). Chief Engineer, Consolidated Tax Administration, 

Ministry of Finance, Shanghai, China. 
Tsao, Walter Chih C I, '25 (D). 
Tsu, CheeL., I, '08 (D). 
Tu, Chung T., I, '22(D). 

Turbak, Stanley, IX, '34 (C). With Firestone Cotton Mills, New Bedford, Mass. 
Turcotte, Telesphore W., IX, '34 (C). Reaming Dept., Morse Twist Drill & 

Machine Co., New Bedford, Mass. 
Turgeon, Roger E., S, '29 (C). With Colonial Silk Mills, New York City, N. Y. 
Turnbull, Walter, I, '03 (D). General Agent, Life Insurance Company of 

Virginia, Lawrenceville, Va. 
Turner, Gordon R., I, '28 (D). In testing laboratory, United States Testing 

Co., 1415 Park Ave., Hoboken, N. J. 
Turner, James H., 3rd, III, '22 (D). Chemist, Chemical Co. of America, 46 

Murray St., New York City, N. Y. 
Turner, Lloyd G., IX, '36 (C). With John I. Paulding, Inc., New Bedford, 

Mass. 
Turner, Oswald P., Ill, '29 (D). With American Celluloid Company, New 

York City, N. Y. 
Twardowski, Adolphe J., Ill '29 (D). 
Tyler, James B., Ill, '32 (C). 

Urquhart, George C., Ill, '09 (D). Shanghai, China, representative of a Boston 
dye Manufacturing Company. 

Van Dyk, Francis R., II, '21 (C). Vice-president, James Van Dyk Company, 

50 Barclay St., New York City, N. Y. 
Varnum, Albert H., Jr., IX, '34 (C). 
Vera Frederick J., I, '07 (D). 
Vieir'a Nicholas R.', Ill, '18 (D). With E. I. duPont de Nemours & Co., 300 W. 

First St., Charlotte, N. C. 
Viera, A. Ruth, S, '33 (C). With Wamsutta Mill, New Bedford, Mass. 
Visbal, Luis G., IV, '12 (D). Manager Knitting Department, Espriella & Co., 

Cartegena, Colombia, S. A. 

Waldstein, Benjamin, I, '15 (D). Salesman, S. H. Waldstein, 10 High St., 

Boston, Mass. 
Walker, Stuart B., I, '26 (D). Textile Testing and Analyzing, U. S. Testing 

Co., 1415 Park Ave., Hoboken, N. J. 
Wallner, Siegfried, IV, '19 (C). Hosiery Plant, Arrow, Virginia. 
Wallner, Waldemar, IV, '23 (C). Superintendent, Paul Knitting Mills, Inc., 

Pulaski, Virginia. 
Walne, James A., I, '26 (D). Designer, Taylor Clapp & Beall, 109 Worth St., 

New York City, N. Y. 
Walters, Harold J., IV, '07 (D). Assistant Superintendent, Thomas Develon, 

Jr., A Street and Indiana Ave., Philadelphia, Pa. 



58 

Warburton, Peter, I, '31 (D). Sales Representative, Fiske Bros. Refining Co., 

New York, N. Y. 
Wareing, Clifford S., I, '30 (D). With Booth Mill, New Bedford, Mass. 
Wareing, Eli W. T., Ill, '27 (D). With United Merchants and Manufacturers, 

Fall River, Mass. 
Waring, Edmund A., Ill, '28 (D). With National Spun Silk Co., New Bedford, 

Mass. 
Waring, Joseph A., Jr., Ill, '25 (D). Boss Dyer, Van Raalte Hosiery Co., 

Paterson, N. J. 
Waring, Leo J., Ill, '25 (D). 
Warner„ Raymond C, III, '33 (D). Chemist, Farwell Bleachery, Lawrence, 

Mass. 
Watson, James, Jr., Ill, '22 (D). Marion, Mass. 
Watkins, Charles F., Jr., Ill, '21 (D). Superintendent, Norwich Plant of U. S. 

Finishing Co., Norwich, Conn. 
Waxier, Jacob H., I, '21 (D). Insurance and Real Estate, New Bedford, Mass. 
Weller, George W., Jr., S, '18 (C). Merchant, Ponemah Building, P. 0. Box 

539, Taftville, Conn. 
Wentworth, Howland, VI, '15 (C). New Bedford, Mass. 
Wheeler, William J., S, '22 (C). Salesman, Tide Water Oil Sales Corp., East 

Providence, R. I. 
White, Clifford L., II, '09 (D). New Bedford, Mass. 
White, Elliott H., Ill, '26 (D). Assistant Chemist, Boston Elevated Railways, 

Dept. of Power, 538 Harrison Ave., Boston, Mass. 
Whitehead, George E., I, '23 (D). Filling Station Manager, New Bedford, 

Mass. 
Whitlow, Samuel A., Jr., Ill, '22 (D). Electrical Engineering, New York 

Edison Company, 130 East 15th St., New York City, N. Y. 
Whitman, L. Clay, II, '22 (D). Washington, R. I. 
Whitney, Howard B., I, '16 (D). George L. Whitney Market, Pawtucket, 

R.I. 
Wilcox, Roger M. H., S, '10 (C). Life, Accident and Health Insurance, 49 

Federal St., Boston, Mass. 
Wilkinson, Robert A. J., II, '34 (D). Assistant Designer, Gosnold Mill, New 

Bedford, Mass. 
Willey, Eugene L., I, '24 (D). Hope, R. I. 

Williams, Raymond H., Ill, '33 (D). With U. S. Finishing Co., Providence, R. I. 
Williamson, Thomas G., VI, '00 (D). 
Williamson, Thomas W., I, '06 (D). New Bedford, Mass. 
Winnell, Lloyd H., Ill, '20 (D). With National Aniline & Chemical Company, 

40 Rector St., New York City, N. Y. 
Winsper, Samuel F., Jr., S, '29 (C). Superintendent, Seminole Mills, Clear- 
water, S. C. 
Wishnietsky, Benjamin P., Ill, '35 (D). Foreman of Dyehouse, Bertram 

Goldberg, Inc., Johnstown, N. Y. 
Witherbee, Rex G., I, '05 (D). Engineer, Utica, N. Y. 
Wojcicki, Edward, IX, '32 (C). 
Wong, Fook W., I, '18 (D). Manager, Cotton Spinning & Weaving Mill of the 

Kwongrtung Spinning & Weaving Mills, Canton City, Canton, China. 
Wong, James H. Y., I, '25 (D). Sales Manager and Superintendent, A. B. C. 

Underwear Mill, Office at 193A Nanking Road, Factory at 231 Connaught 

Road, Shanghai, China. 
Wong, Ka L., I, '07 (D). Secretary, Salt Gabbell, Shanghai, China. 
Wong, Thomas G., I, '15 (D). General Manager, China A. B. C. Underwear 

Mill and Superintendent, Tung Yih Cotton Mill, Shanghai, China. 
Wood, Theodore, I, '03 (D). Advertising Manager, Bemberg Corp., New York, 

N. Y. 
Woodward, Chester M., I, '24 (D). 
Worden, George, II, '07 (D). New Bedford, Mass. 
Wright, Wilbur A., Ill, '32 (C). With United States Finishing Co., Norwich, 

Conn. 



59 

Ybarra, Andrew C, VI, '04 (D). 

Yen, Yuan S., I, '20 (D). c/o Dah Sun Cotton Mill, Nantung Chow, Kiangsu, 
China. 

York, David E., Ill, '33 (D). With United States Finishing Co., Providence, R. I. 

Young, Edward L., I, '31 (D). 

Young, Frederick J., VI, '04 (D). Manager, Bemis Cotton Mill, Bemis, Tenn. 

Young, James D., I, '26 (D). 

Young, Jun L., I, '25 (D). 233 N. Kuakini St., Honolulu, Hawaii. 

Young, Thomas, II, '21 (C). New Bedford, Maes. 

Young, Tsun S., I, '17 (D). Engineer, Dah Foong Cotton Spinning and Weav- 
ing Mill, Shanghai, China. 

Young, Yolay, I, '21 (C). Shanghai, China. 

Yozefek, Stanislaw, IX, '33 (C). Machinist, Continental Wood Screw Co., 
New Bedford, Mass. 

Yu, Chao-Ming, I, '29 (D). Dean, The Textile College, Nantung Institute, 
Nantung, Kiangsu, China. 

Yu, Victor H., I, '20 (D). Director of the Dah Lung Cotton Mills, Chang- 
chow, China, and with the Wei Kee & Co., 455 Tientsin Road, Shanghai, 
China. 

Yuan, Harold H. H., I, '23 (C). Textile Engineer, Nichols Woolen Spinning 
Mill, Tientsin, China. 

Zung, King K., Ill, '20 (C). 

EVENING DIPLOMA GRADUATES 

Baldwin, John M., Ill, '14. New Bedford, Mass. 

Bavoux, Roger E., II, '27. 

Bolton, James, VI, '17. Superintendent, Gosnold Mills Co., New Bedford, Mass. 

Bolton, Wright, Jr., Ill, '14. In charge of Rayon Division, Pacific Mills, 

Lawrence, Mass. 
Boudreau, Louis E., VI, '36. Boss changer, Kilburn Mills, New Bedford, Mass. 
Bowen, Evan A., VI, '21. New Bedford, Mass. 
Burton, James L., II, '22. New Bedford, Mass. 

Carr, Ernest, II, '29. Designer, Booth Manufacturing Co., New Bedford, Mass. 
Carse, Henry G., VI, '21. Overseer, Taber Mill, New Bedford, Mass. 

Day, Andrew F., VI, '19. Insurance Agent, First National Bank Building, 

New Bedford, Mass. 
DesMarais, Ernest A., II, '36. Beaming Slasher Tender, Kendall Co., New 

Bedford, Mass. 
Driesen, Frank, VI, '26. New Bedford, Mass. 
Dumas, Leon F., II & VI, '31. Assistant Supt. Whitin Bros., Linwood, Mass. 

Flanders, Kenneth A., VI, '20. Agent, Dunn and Bradshaw, Providence, R. I. 

Green, Jim, II, '06. Farmer, R. F. D. No. 4, Box 75, So. Dartmouth, Mass. 
Gurney, Preston S., VI, '19. Overseer, Berkshire Fine Spinning Associates, 
Inc., North Adams, Mass. 

Hagen, John F., VI & II, '16. Manager, Executive Offices, Cotton Mill Division. 

Standard Textile Products Company, 320 Broadway, New York City, N. Y. 
Hammond, Amos E., I, '04. 

Harrop, William H., VI, '30. With New York Mills, Utica, N. Y. 
Holden, Frank, VI, '18. In Charge of Card Room, Reading Cotton Mill, Joseph 

Bancroft & Sons, Reading, Pa. 
Holmes, Philip C, I, '08. Clerk, Grinnell Mfg. Corporation, New Bedford, Mass. 



60 

Kelty, Pharus T., VI, '23. Third Hand on Roving Frames, Page Manufacturing 

Company, New Bedford, Mass. 
Kovar, Paul, II, '29. Draftsman, National Spun Silk Co., New Bedford, Mass. 

LaChapelle, Adelard J., II, '07. Designer, Neild Mill, New Bedford, Mass. 
Lauzon, Wilfrid P., VI, '34. Spindle Setter, Fiske Rubber Co., New Bedford, 
Mass. 

MacPhail, Walter S., II & VI, '30. Assistant Cotton Classer, Wamsutta Mills, 

New Bedford, Mass. 
Mellor, John A., II, '16. Designer, Soule Mills, New Bedford, Mass. 
Michaud, Honore, Jr., VI, '34. Third hand on Spoolers, Pierce Bros., Ltd., 

New Bedford, Mass. 

Palmer, John M., Ill, '14. Salesman, Borne, Scrymser Co., New York Citv, 

N. Y. 
Parker, William E., VI & II, '17. Wefer & Parker, Insurance, Merchants 

National Bank Building, New Bedford, Mass. 
Paull, Norman M., Ill, '16. Civil Mechanical Engineer, 508 Bookstore Bldg., 

New Bedford, Mass. 
Peterson, E. Gilbert, III, '16. New Bedford, Mass. 

Resendes, Manuel A., VI, '23. Third Hand, Kilburn Mill, New Bedford, Mass. 
Riley, William, VI, '25. Superintendent, Esmond Mills, Esmond, R. I. 

Sharpies, William, Jr., II, '17. With Pacific Mills, Lawrence, Mass. 
Siever, Hughes L., Ill, '12. Southern Representative, Borne, Scrymser Com- 
pany, 17 Battery Place, New York City, N. Y. 
Slater, Edward, VI, '23. 

Slater, Victor O. B., II, '07. Designer, Pierce Mill, New Bedford, Mass. 
Smith, Clifford, II, '34. Warp Changer, Gosnold Mills Co., New Bedford, Mass. 
Sylvia, Anthony R., II, '17. Overseer, Gosnold Mill Co., New Bedford, Mass. 

Townson, Thomas, III, '29. Merchant, 1513 Acushnet Ave., New Bedford, 

Mass. 
Tripp, Joseph A., VI, '23. Cotton Classer, Kilburn Mill, New Bedford, Mass. 
Trojan, Frank, II, '24. Second Hand, National Spun Silk Co., New Bedford, 

Mass. 

Walker, George, VI, '23. Principal, New Bedford Textile School, New Bedford, 

Mass. 
Winterbottom, George, VI, '06. 



Publication of this Document Approved by the Commission on Administration and Finance 
500 5-37. Order 125. 



NEW BEDFORD TEXTILE SCHOOL 

New Bedford, Mass. 



APPLICATION BLANK FOR ENROLLMENT IN DAY CLASSES 



I hereby make application for admission to the day classes of the New Bedford 
Textile School. 

Date 193.. 

Name in full ! 

Age last birthday 

Home residence 

Name of parent or guardian 

Name of school last graduated from 

If not a graduate, school last attended 

State in what way you first learned of the school 



Mark X Against Course Desired 



General Cotton Manufacturing Course 



Designing Course 



Chemistry Dyeing and Finishing Course 



Knit Goods Manufacturing Course 



Carding and Spinning Course 



Testing and Fabric Analysis Course 



Mechanical Course 



Rayon Preparation Course 



Special Course in 



The above application should be filled out and mailed or delivered to — 

THE NEW BEDFORD TEXTILE SCHOOL 
New Bedford, Mass.