Skip to main content

Full text of "Catalogue"

See other formats

CWj* (Sflmttummrelilf trt fHajoaarlpxfirllB 











JOHN A. SHEA, President. 

Ex officio, His Honor LEO E. J. CARNEY, Mayor. 
Ex officio, JAMES G. REARDON, Commissioner of Education. 
Ex officio, ALLEN P. KEITH, Superintendent of Schools. 

Term expires June 30, 1938 

LOUIS A. CORDEIRO, Mortician, 71 Briggs St., New Bedford. 
ADELARD J. LACHAPELLE, Designer, Neild Mfg. Co., New Bedford. 
JOSEPH N. FINNI, D.M.D., 644 Kempton St., New Bedford. 
EMIL F. SUCHNICKI, M.D., 494 Brock Ave., New Bedford. 
JOHN N. O'BRIEN, Mattress Manufacturer, Comfortress Co., New 

Term expires June 30, 1939 
WILLIAM E. G. BATTY, Secretary and Treasurer of Loom Fixers' 

Union, New Bedford. 
JOHN L. COHOLAN, Overseer in cloth Room, Taber Mill, New Bedford. 
FRANK F. DUTRA, Second Hand, Goodyear Fabric Corporation, New 

HERBERT A. LINDBERG, Salesman, Peirce & Hook, Inc., New Bedford. 
MANUEL SILVA, Secretary-Treasurer, Ring Twisters', Yarn Finishers' 

and Web Drawers' Union, New Bedford. 

Term expires June 30, 19 UO 

RAYMOND R. McEVOY, Asst. Supt., The Knitted Padding Co., Canton,' 

HON. SAMUEL ROSS, Secretary, Mule Spinners' Union, New Bedford. 
ERNEST ROBITAILLE, Culoumbe St., Acushnet, Mass. 
JOHN A. SHEA, Taunton. Supt. of Rayon Dept., Mt. Hope Finishing 

Co., North Dighton, Mass. 
JAMES B. SULLIVAN, Overseer, Soule Mill, New Bedford. 


John A. Shea, President. 

George Walker, Principal. 

Maud L. Clark, Senior Bookkeeper. 

Ellen Broadmeadow, Senior Clerk and Stenographer. 

Vivian M. Pimental, Junior Clerk. 

Heads of Departments 

Thomas H. Gourley, Carding and Spinning. 

Fred Beardsworth, Warp Preparation and Weaving. 

Samuel Holt, Designing. 

John L. Fawcett, Rayon and Knitting. 

Fred E. Busby, S.B., Chemistry, Dyeing and Finishing. 

Morris H. Crompton, Engineering and Mechanical Drafting a 


Edward L. Murphy, Jr., General 
Malcolm H. Richardson, General. 
Antone Rodil, Weaving. 
John E. Foster, B.S. in C. E., Mechanical Department. 
Adam Bayreuther, Machine Shop. 
Abram Brooks, Frank L. D. Weymouth, A.B., Chemistry, Dyeing and 

The Principal and Heads of Departments constitute the faculty 

of the school. 

The day instructors serve both day and evening. 

Assistant Evening Instructors 

Carding and Spinning 

Frank F. Dutra Isaiah Hadfield 

James Nisbet, Jr. 

Warp Preparation and Weaving 

Francisco d'O. Abreu Isabel C. Murphy 

Eugene Brightman Joseph Pacheco 

Thomas Bullen Joseph E. Pageotte 

Austin Cocker Thomas Pilkington 

Christopher Cheetham Joseph Plouffe 

John E. Cosgrove James Plummer 

Herbert Crosby Frank Preston 

John Drink water Charles Ridenti 

Omer Dumas Albert N. Rushworth 

Ernest J. Gagne Aloysius Smith 

Hilda M. Kenworthy Rhodes Smith 

Ernest Lamb Frank Trojan 

Albert Leach Frederick D. Walton 

William Leach Edmond A. Wh alley 

Herbert A. Lindberg Samuel Woodruff 

John A. Mellor Edward Wunschel 

George Wunschel 

Cost Finding 
Walter S. MacPhail 


Henry G. Carse Alfred Fletcher 

Elizabeth W. Chadwick 

Mechanical Drawing 
Arthur F. Colwell, Jr. Henry C. Nelson 

Machine Shop Practice 
Louis Culver Ralph L. Lynam 

Henry Cygan Byron M. Pardee 


Day Classes 


June 8, Wednesday, 9 A. M. 
September 7, Wednesday, 9 A. M. 
September 12, Monday, 8:30 A. M. 
October 3-7, Monday — Friday 
October 12, Wednesday 
November 11, Friday 
November 23, Wednesday, 12 M. 
November 28, Monday 8:30 A.M. 
December 16, Friday, 4 p.m. 

First entrance examination. 
Second entrance examination. 
First semester begins. 
Class elections. 
Columbus Day — Holiday. 
Armistice Day — Holiday. 
Thanksgiving recess begins. 
Thanksgiving recess ends. 
Christmas recess begins. 


January 3, Tuesday, 8:30 A.M. 
January 23, Monday, 8:30 A.M. 
January 26, Thursday, 4 p.m. 
January 30, Monday, 8:30 A.M. 
February 22, Wednesday 
March 24, Friday, 4 p.m. 
April 3, Monday 8:30 A.M. 
April 7, Friday 
April 19, Wednesday 
May 30, Tuesday 
May 26— June 2, Friday — Friday 
June 5-9, Monday — Friday 
June 7, Wednesday, 9 A.M. 
June 9, Friday, 8 p.m. 

Christmas recess ends. 
Mid-year examinations begin. 
Mid-year examinations end. 
Second semester begins. 
Washington's Birthday — Holiday. 
Spring recess begins. 
Spring recess ends. 
Good Friday — Holiday. 
Patriots' Day — Holiday. 
Memorial Day — Holiday. 
Final examinations, senior class. 
Final examinations, other classes. 
Entrance examinations. 
Graduation exercises, school hall. 

Evening Classes 


September 23, Friday, 7:30-9:00 p.m. Enrollment. 

September 26, Monday, 7:30 p.m. 
November 11, Friday 
November 24-25, Thursday — Friday 
December 12-16, Monday — Friday 
December 16, Friday- 

First term begins. 
Armistice Day — Holiday. 
Thanksgiving recess. 
First term ends. 


January 3, Tuesday, 7:15-9:00 P.M. Enrollment, second term. 

January 3, Tuesday, 7:30 P.M. Second term begins. 

March 24, Friday, 9:15 P.M. Second term ends. 

June 9, Friday, 8. p.m. Graduation exercises, school hall. 


The Legislature of the Commonwealth of Massachusetts, in the act 
under which the Trustees of the New Bedford Textile School were incor- 
porated, gives as the purpose of the incorporation that of establishing 
and maintaining a textile school for instruction in the theory and practi- 
cal art of textiles and kindred branches of industry. 

As New Bedford is primarily a cotton manufacturing city, this school 
confines itself principally to instruction in the cotton branch of the textile 
industry, and seeks to perfect itself in this line. Its course of instruction 

is arranged to subserve the interests of two general classes of students : 
(1) day students, — those who give their whole time for two or three years 
to acquiring the theory as well as the practice of cotton manufacturing 
in all its details from the raw cotton to the finished fabric, and also have 
instruction in the scientific principles which underlie the construction of 
the machinery and its operation, and the artistic principles which are 
involved in the production of desirable and ornamental fabrics; (2) even- 
ing students, — those who are employed in the mills during the day and 
who, by attending the Textile School evenings, are able to learn other 
phases of the industry from that in which they are employed, or to per- 
fect themselves in their special lines of work, and become more efficient 
workmen. The courses of instruction for these two classes of students are 
given fully on other pages of this catalogue. 

The whole of the machinery in the school is modern, being constructed 
especially for the school. It is all high grade, has latest improvements, 
and is especially built to afford facilities for all kinds of experimental 
work, and represents all the leading types of machines from the best 
builders in the United States, and several English builders. 

The school has been very fortunate this year in being granted by the 
Legislature an. appropriation of $40,000 which is to be used to revamp the 
present equipment as far as possible to provide for instruction in rayon 

There is no mill in which there is so large a variety of machinery as in 
the New Bedford Textile School. This consequently affords the student a 
better opportunity to become acquainted with various machines and 
methods than could be found in any one manufacturing establishment. 

Each instructor in the day school is a man who is thoroughly conversant 
with the work of the department under his charge by thorough training 
and long experience. Each one has charge of the work in his department 
at night also, assisted by experienced assistants from the mills, many of 
whom are graduates of this school. 

The school went into operation in the fall of 1899, and the first class 
was graduated in 1900. The regular courses were one year in length for 
the first few years, but were afterwards increased to three years. Special 
shorter courses are given, however, for which certificates are granted. 

For nineteen years the school was a semi-private institution, but sup- 
ported by appropriations made each year by the State and by the city of 
New Bedford. It was managed by a Board of Trustees, two appointed by 
the Governor of the Commonwealth, two representing the city (the mayor 
and the superintendent of schools; ex officiis), and twenty organized 
under the general statute by which the school was founded, a perpetual 
body, with power to fill vacancies other than the four created for and 
representing the Commonwealth and city. 

On July 1, 1918, it became a State institution by an act amending the 
State Constitution. It is still maintained with appropriations made by 
the State and city. 

It is managed by a Board of Trustees consisting of eighteen members, 
the Commissioner of Education, ex officio, fifteen appointed by the Gover- 
nor of the Commonwealth, and two, the Mayor and the superintendent of 
Schools, ex officiis, representing the city. Most of the trustees are men 
who either are or have been connected actively with the manufacture of 
cotton textiles. 

The number of individual students attending the school since its open- 
ing is 15,824, the number graduated 4,977. Many evening students who 
attend regularly do not take the examinations, and therefore do not ap- 
pear as graduates, though they may have a good record as students, es- 
pecially in practice. This shrinking from examinations is natural, for 

many of them have little or no command of English, or are not accus- 
tomed to examinations. 

A large number of those who do not appear as graduates, however, are 
benefited by the instruction given in the school, and have acquired a 
knowledge and skill that have enabled them to rise in the industry and 
improve their financial and social condition. 


The school is situated in the center of the city of New Bedford, Mass., 
on the main car line of the city, which connects with the mill districts, 
and is readily accessible to mill operatives who attend the evening sessions 
of the school. It is near the residential part of the city, and is therefore 
conveniently situated for non-resident pupils who take up a temporary 
residence in the city. 

New Bedford is an especially suitable location for an institution of this 
character. It is the largest cotton manufacturing city of fine yarns and 
fancy woven fabrics and novelties in the country. Its spindles number 
970,664; and looms, 20,791. 

High grade combed yarns are produced in New Bedford to a greater 
extent than in any other city, while the mills are engaged in the manufac- 
ture of fine shirtings, muslins, lawns, sateens, lenos, checks, piques, mar- 
quisettes and other fancy fabrics to an extent unknown elsewhere. New 
Bedford's great advantage in this respect can be attributed principally to 
the fact that her mills are nearly all of recent construction, with the 
most improved and up to date equipment. The environment of these mills 
is in itself a benefit to the students who select the New Bedford Textile 
School as the institution in which to learn the mill business, as they have 
opportunity to observe their construction and operation, and to find em- 
ployment in them during the long summer vacations and upon finishing 
their course in the school. 

New Bedford is within short distance of Hopedale, Whitinsville, Hyde 
Park, Providence, Pawtucket, Woonsocket, Taunton and other large cotton 
machinery centers. It is one of the healthiest of the manufacturing cities 
in the United States. Picturesquely situated on the extreme south shore 
of Massachusetts, it enjoys one of the mildest winter climates in New 
England, and thus offers peculiar residential advantages for nonresident 


The school is housed in two separate buildings connected by a tunnel in 
the basement and by covered bridges overhead. They are constructed of 
red brick with trimmings of Indiana sandstone. They are classified as 
the machinery building and the recitation building. 

The first now comprises the original building, erected in 1898-99, and 
the first two additions erected in the years 1901-02 and 1905, respectively, 
and the latest addition 1922 and 1923. This building is 164 feet in length, 
with an average depth of 112 feet. It is three stories high, with basement 
under most of it, and contains a floor space of 59,600 square feet. . In it 
are situated the administration offices, the power house and all the de- 
partments comprised in a cotton yarn and cotton cloth mill. In addition, 
it has two large thoroughly equipped rooms for instruction in the art of 
knitting, both for hosiery and underwear, and a gymnasium. 

The recitation building was completed and occupied in the fall of 1911. 
It consists of a main building 108 by 93 feet 6 inches, three stories high, 
with a deep well-lighted basement under the whole of it, and contains 
40,392 square feet of floor space. It also has an annex 68 feet 3 inches 
long by 19 feet 3 inches deep, one story high, with basement, and contains 


2,634 square feet of floor space. This annex is used as an experimental 
laboratory and as a storeroom for chemical supplies. 

The main building, besides being equipped with recitation and lecture 
rooms of various sizes, has a thoroughly equipped chemical laboratory, 
dyeing and finishing rooms, engineering laboratories, a commodious ma- 
chine shop, drafting rooms, a designing room especially fitted, an exhibi- 
tion room, and an assembly hall that will seat 400 persons. 

Both structures are of the slow-burning mill construction type, ap- 
proved by the leading fire insurance associations and mill engineers, 
while the general equipment of the plant is also illustrative of the best 
methods of lighting, heating, ventilating, humidifying and fire-protecting 
mills. Great attention has been paid to the planning and arranging of 
these buildings for the school, to make them suitable for the purposes 
of imparting textile instruction, and in order that the machinery building 
should give an object lesson in cotton mill engineering. 

Power and light are purchased from the local electric power company, 
and the school supplies its own heat and the steam needed in its finishing 
plant. The fire protection was designed and installed by the General Fire 
Extinguisher Company of Providence, R. I., the well-known Grinnell 
Sprinkler being used. The American Moistening Company, the Bahnson 
Humidifier Company and the Parks-Cramer Company have installed com- 
plete humidifying apparatus. The whole equipment is approved by the 
Massachusetts State inspectors of public buildings. 


The regular day diploma courses of the school are as follows : — 

General Cotton Manufacturing. 

Chemistry, Dyeing and Finishing. 


Carding and Spinning. 

Knit Goods Manufacturing. 

All the above courses are diploma courses, three years long, and are 
intended to qualify students to hold positions of responsibility in textile 
manufacturing and allied establishments. 

The advantages of these courses to qualify men to hold responsible 
positions in cotton mills, dyeing and finishing plants, commission houses, 
etc., are many. 

It is not expected that a young man going from this school will at once 
secure an executive position. It is expected, on the contrary, that he will 
begin in a more humble fashion, that with the knowledge acquired in the 
school and the experience gained in the mill itself he will be qualified to 
hold higher positions, and that his advancement will be much more rapid 
and his knowledge broader than one who has not had the school instruc- 
tion and training. That such is the case is shown already by the positions 
now held by the graduates of the school. 

Many of them are occupying positions of trust and responsibility in the 
textile and allied industries as manufacturers, treasurers, agents, superin- 
tendents, assistant superintendents, designers in mills and commission 
houses, overseers, chemists and dyers, etc. Some have been called to good 
positions as designers directly from the school, and many who have at- 
tended the evening classes have so improved in skill and knowledge that 
they have advanced in position and earning power. 

That the work of the school is recognized by textile manufacturers and 
those engaged in allied industries is attested by the fact that applications 
are constant for men of the school. 

But this school does not agree to make successful men out of lazy, care- 

less and indifferent boys, nor does it care for such boys as students. But 
for those who wish to learn, who are ready to work, who are willing to 
bide their time, it does offer an opportunity that will supply them with 
an honorable vocation, with many opportunities for advancement in the 
world, with good remuneration. 

In case a prospective student feels that no one of the diploma courses 
meets his particular needs, he is requested to communicate with the Prin- 
cipal, stating his wishes. Whenever possible, special courses will be given 
in the various departments, for which certificates will be granted, stating 
the subjects taken and the time given to them. The limitations of these 
special courses will be determined in every case by the management. 

General Cotton Manufacturing Course (I) 

First Year 

First Term 
Pickers and Cards 101 (6 hrs.) 
Weaving 111 (6V 2 hrs.) 
Fabric Analysis 121, 151 (3 hrs.) 
Designing 131 (1% hrs.) 
Hand Loom 161 (iy 2 hrs.) 
Principles of Mechanics 171 (1 hr.) 
Mechanical Drawing 172 (3% hrs.) 
Slide Rule 170 (1 hr.) 
Chemistry 182 (7 hrs.) 
Yarn Calculations 121 (1% hrs.) 

Second Term 
Cards and Drawing Frames 102 

(QV 2 hrs.) 
Weaving 112 (6% hrs.) 
Warp Preparation 122 (3% hrs.) 
Designing 132 (iy 2 hrs.) 
Cloth Analysis 152 (3 hrs.) 
Hand Loom 161 (iy 2 hrs.) 
Mechanical Drawing 172 (3% hrs.) 
Textile Chemistry and Dyeing 222 

(6% hrs.) 

Second Year 

First Term 
Roving and Spinning Frames 103 

(8 hrs.) 
Weaving 113 (3 hrs.) 
Designing 133 (3 hrs.) 
Cloth Analysis 153 (3 hrs.) 
Machine Drawing 173, 175 (2% 

Machine-shop Practice 174 (3% 

Steam Engineering 176 (1 hr.) 
Dyeing 223 (6y 2 hrs.) 
Rayon Testing 297 (2 hrs.) 

Second Term 
Advanced Calculations and Cotton 

Yarn Preparation 104, 106 (5 

Cotton Sampling 107 (1% hrs.) 
Weaving 114 (5 hrs.) 
Designing 134 (3 hrs.) 
Cloth Analysis 154 (3% 
Machine-shop Practice 

Machine Drawing 175 (2 hrs.) 
Steam Engineering 176 (1 hr.) 
Textile Chemistry 234 (6% hrs.) 
Testing 295 (1% hrs.) 


(3y 2 

Third Year 

First Term 
Combing and Twisting 103, 105 

(8% hrs.) 
Weaving 115 (6y 2 hrs.) 
Designing 135 (3y 2 hrs.) 
Color 145 (2 hrs.) 
Cloth Analysis 155 (iy 2 hrs.) 
Elementary Electricity 177 (2 hrs.) 
Knitting 294 (3 hrs.) 
Rayon Processing 296 (3 hrs.) 
Merchandising 108 (1 hr.) 
Economics 109 (1% hrs.) 

Second Term 
Carding and Spinning Thesis 

(8 hrs.) 
Weaving 116, 117 (6V 2 hrs.) 
Designing 136 (3y 2 hrs.) 
Color 146 (2 hrs.) 
Cloth Analysis 156 (3 hrs.) 
Mill Engineering 178 (3 hrs.) 
Converting 235-260 (iy 2 hrs.) 
Rayon Processing 296 (2 hrs.) 
Merchandising 108 (iy 2 hrs.) 
Economics 109 (1% hrs.) 


General Cotton Manufacturing Course 

The course in cotton manufacturing is designed to give the student a 
thorough fundamental knowledge of the different processes entering into 
the construction of a piece of cloth from the raw staple to the finished 

During the first year the student takes up the study of yarn prepara- 
tion, weaving, designing and cloth analysis. The study of mechanics, 
mechanical drawing and chemistry is also pursued the first year, the 
work in these subjects being designed especially for men who are to take 
up the cotton mill work. Instruction in yarn calculations, spooling, warp- 
ing, and slashing is also offered during the first year. 

In the second and third years sufficient time is given to instruction in 
picking, carding and spinning, while the subjects of weaving, designing 
and analysis are continued. Practical work in the machine shop is entered 
upon the second year. 

Dyeing is begun the first year, the work being such as is of special 
interest to the student of cotton manufacturing. The student is also given 
instruction in steam engineering during the second year, while in the 
third year, work in elementary electricity and cotton mill construction is 
offered. Knitting and color are also given in the third year. Rayon is 
taken up in the second year and continued in the third year. 

The work in all subjects is so arranged that the student is taken grad- 
ually from the simpler to the more difficult problems. Much of the work 
in the last year is original, and the student is thrown on his own re- 

The work in chemistry, dyeing, mechanics and shop practice is all ar- 
ranged with special reference to the student of cotton manufacturing. 

This course is very thorough, and is always recommended to the student 
who is to make cotton cloth manufacturing his future work. 

Designing Course (II) 

First Year 

First Term 
Pickers and Cards 101 (3 hrs.) 
Weaving 111 (6% hrs.) 
Fabric Analysis 121, 151 (3 hrs.) 
Designing 131 (4y 2 hrs.) 
Hand Loom 161 (iy 2 hrs.) 
Principles of Mechanics 171 (1 hr.) 
Slide Rule 170 (1 hr.) 
Mechanical Drawing 172 (3% hrs.) 
Yarn Calculations 121 (iy 2 hrs.) 
Chemistry 182 (7 hrs.) 


First Term 
Weaving 113, 114 (6V 2 hrs.) 
Designing 133 (3V 2 hrs.) 
Color 145 (2 hrs.) 
Cloth Analysis 153, 154 (8 hrs.) 
Rayon Testing 297 (3 hrs.) 
Machine Drawing 173, 175 (2 hrs.) 
Machine-shop Practice 174 (3V 2 

Steam Engineering 176 (1 hr.) 
Dyeing 223 (3 hrs.) 

Second Term 
Cards and Drawing Frames 102 

3y 2 hrs.) 
Weaving 112 (6V 2 hrs.) 
Warp Preparation 122 (3% hrs.) 
Designing 132 (4% hrs.) 
Cloth Analysis 152 (3 hrs.) 
Hand Loom 161 (iy 2 hrs.) 
Mechanical Drawing 172 (3y 2 hrs.) 
Chemistry and Dyeing 222 (6% 



Second Term 
Advanced Calculations and Cotton 

Yarn Preparation 104, 106 (2 

Cotton Sampling 107 (iy 2 hrs.) 
Weaving 115 (8 hrs.) 
Designing 134 (3 hrs.) 
Color 146 (2 hrs.) 
Cloth Analysis 155 (5 hrs.) 
Machine-shop Practice 174 (Sy 2 

Machine Drawing 175 (2 hrs.) 
Steam Engineering 176 (1 hr.) 
Textile Chemistry 222 (3 hrs.) 
Testing 295 (iy 2 hrs.) 


Third Year 

Second Term 
Weaving 116 (6V 2 hrs.) 
Cost Finding 179 (2 hrs.) 
Jacquard Designing 136 (8 hrs.) 
Cloth Analysis 156 (5 hrs.) 
Commission House Work 157 (2 

Styling 158 (iy 2 hrs.) 
Converting 235 (iy 2 hrs.) 
Mill Engineering 178 (3 hrs.) 
Merchandising 108 (1% hrs.) 
Economics 109 (IV2 hrs.) 

First Term 
Roving and Spinning Frames 103 

(3% hrs.) 
Weaving 116 (6 hrs.) 
Jacquard Designing 135 (6% hrs.) 
Cloth Analysis 156 (4y 2 hrs.) 
Knitting 294 (2 hrs.) 
Color 146 (2 hrs.) 
Machine-shop Practice 174 (3% 

Elementary Electricity 177 (2 hrs.) 
Merchandising 108 (1 hr.) 
Economics 109 (iy 2 hrs.) 

Designing Course 

Designing is a branch of textile manufacturing of sufficient importance 
to call for a separate diploma course, extending over three school years. 
Since the major subjects in this course are confined to designing, cloth 
analysis and weaving, the work is somewhat more intensive than in the 
general course. 

The student, during the first year, takes up the study of the plain loom, 
the more simple designs and the analysis of such fabrics as contain de- 
signs similar to those being studied in the designing lessons. 

Instruction the first year is also offered in the preparation of warps for 
the loom, while work in the mechanical department is entered upon the 
first year, and extends through all three years of the course. 

Instruction in the mechanical department is considered essential to the 
student of designing, as many of the new fabrics brought out by de- 
signers from year to year are based as much upon the mechanism of the 
loom as upon pure design. 

During the second year more advanced fabrics, such as double cloths, 
Bedford cords, piques and lenos, are studied, both in designing and anal- 
ysis, while much of the work in the weave room consists of putting orig- 
inal designs into the looms and weaving a short length of each. 

Commencing with the first term of the second year, a practical course 
in color is offered the student, who is required to work out a series of 
color scales and apply them in coloring designs. 

In the second term of this year cotton sampling is introduced. 

The third year is largely devoted to the subject of Jacquard designing 
in both the designing and weaving departments. During this year the 
subject of commission house work, as it applies to the styling and finish- 
ing of new fabrics, is dealt with, and the student is given a close insight 
into the requirements of this branch of designing. 

For the student who wishes to perfect himself in the subject of cloth 
designing, as applied to the cotton trade, this course will be found very 

Chemistry, Dyeing and Finishing Course (III) 

First Year 

First Term 

Principles of Mechanics 171 (1 hr.) 

u<Mechanical Drawing 172 (4y 2 hrs.) 

^General Chemistry 181 (12y 2 hrs.) 

^Inorganic Preparations 183 (10 

''Designing and Cloth Analysis 131 

3y 2 hrs.) 
t Slide Rule 170 (1 hr.) 

Second Term 
j Mechanical Drawing 172 (3 x / 2 hrs.) 
uMachine-shop Practice 174 (3 hrs.) 
^Qualitative Analysis 191, 192 (13 

♦-Organic Chemistry 212 (6y 2 hrs.) 
^JTextile Chemistry and Dyeing 222 

(6V2 hrs.) 


Second Year 

First Term 
Color 145 (2 hrs.) 
Machine Drawing 173, 175 (2 hrs.) 
Machine-shop Practice 174 (3 hrs.) 
Steam Engineering 176 (1 hr.) 
^Quantitative Analysis 202 (11% 

- Organic Chemistry 213 (6V2 hrs.) 
Dyeing 223 (6V2 hrs.) 

Second Term 
Color 146 (2 hrs.) 
Machine-shop Practice 174 (3 hrs.) 
Machine Drawing 175 (2 hrs.) 
Steam Engineering 176 (1 hr.) 
Dyeing 224 (10 hrs.) 
Textile Chemistry 233 (3 hrs.) 
i_p€otton Sampling 107 (2 hrs.) 
. Cotton Manufacturing and Testing 
230 and 295 (iy 2 hrs.) 
Quantitative Analysis 203 (8 hrs.) 

Third Year 

First Term 
'Testing 295 (3 hrs.) 

Elementary Electricity 177 (2 hrs.) 
Eyeing 225 (6V 2 hrs.) 

Singeing 240 (1 hr.) 

Scouring 241 (2 hrs.) 

Bleaching 242 (1 hr.) 

Mercerizing 245 (1 hr.) 
1 Textile Chemistry 234 (10 hrs.) 

Merchandising 108 (1 hr.) 
> Economics 109 (1% hrs.) 

Microscopy 298 (3% hrs.) 

Second Term 
Drying 250 (3% hrs.) 
Calendering 255 (2 hrs.) 
Putting up 260 (1 hr.) 
Thesis 269 (13 hrs.) 
Textile Chemistry 234 (6% hrs.) 
Merchandising 108 (1% hrs.) 
Economics 109 (1% hrs.) 
Microscopy 298 (3V 2 hrs.) 


Chemistry, Dyeing and Finishing Course 

The object of this course is to give to the student a thorough knowledge 
of the chemistry of the textile processes involved in the manufacture of 
cotton cloth. To insure a perfect foundation, the first two years are de- 
voted almost entirely to chemical subjects and laboratory work. During 
this period the subjects of general chemistry, inorganic and organic, are 
taught, the preparation and properties of various chemicals and dyestuffs, 
the properties of the various fibers, and the coloring of them. 

The third year is devoted almost entirely to the analysis of commercial 
articles and the practical dyeing and finishing of cotton goods. The best 
current practice is followed, but the underlying principles are thoroughly 
taught in order that the student may understand the limitations and pur- 
pose of each process. 

The subjects of machine drawing, principles of mechanics, electricity 
and shop work are taught. These allied subjects are arranged with 
special reference to the major subjects, and are considered very impor- 
tant, as they give the student a first hand knowledge of the construction 
of the various machines. 

The graduates of this course find employment with dyestuff makers 
and dealers, with manufacturers of chemicals used in dyeing, with 
bleacheries, dye houses and finishing works. 

It is very desirable that students entering this course shall have suc- 
cessfully completed a scientific course in high school or its equivalent. 
Any one, however, who can show by passing examinations as outlined on 
page 33 his ability to profit by the instruction given is admitted. 


Knit Goods Manufacturing Course (IV) 

First Year 

First Term 
Pickers and Cards 101 (6 hrs.) 
Principles of Mechanics 171 (1 hr.) 
Mechanical Drawing 172 (4% hrs.) 
Chemistry 182 (7 hrs.) 
Knitting 271, 281 (12y 2 hrs.) 
Yarn Calculations 121 (iy 2 hrs.) 


First Term 
Roving and Spinning Frames 103 

(8 hrs.) 
Machine Drawing 173, 175 (2 hrs.) 
Machine-shop Practice 174 (3% 

Steam Engineering 176 (1 hr.) 
Dyeing 223 (6 hrs.) 
Knitting 272, 282 (12 hrs.) 

Second Term 
Cards and Draw Frames 102 (6% 

Mechanical Drawing 172 (3% hrs.) 
Machine-shop Practice 174 (3 hrs.) 
Textile Chemistry and Dyeing 222 

(6V2 hrs.) 
Knitting 271, 281 (13 hrs.) 


Second Term 
Doubling and Drafting 104 (5 hrs.) 
Cotton Sampling 107 (iy 2 hrs.) 
Machine-shop Practice 174 (3% 

Machine Drawing 175 ( 2 hrs.) 
Steam Engineering 176 (1 hr.) 
Textile Chemistry 234 (6V 2 hrs.) 
Knitting 273, 283 (liy 2 hrs.) 
Testing 295 (iy 2 hrs.) 

Third Year 

First Term 
Machine-shop Practice 174 (3% 

Elementary Electricity 177 (2 hrs.) 
Dyeing 226 (3% hrs.) 
Knitting 274, 284, 293 (19y 2 hrs.) 
Color 146 (2 hrs.) 
Microscopy 298 (2 hrs.) 

Second Term 
Mill Engineering 178 (3 hrs.) 
Dyeing 226 (3% hrs.) 
Knitting 274, 284, 293 (18 hrs.) 
Color 146 (2 hrs.) 
Microscopy 298 (6 hrs.) 

. Knit Goods Manufacturing Course 

This course in manufacturing knit goods is adapted to the needs of 
those students, desiring a thorough knowledge of the knitting industry. 

The instruction given covers both the technical and practical parts of 
the business, including cost finding. 

During the first year the student takes up the winding, and preparation 
of cotton, lisle, wool, worsted and silk yarns for use on hosiery machines ; 
also the principle of circular latch-needle knitting, and the setting and 
adjusting of different makes of rib-leg and rib-top machines. 

In the second and third year the time is given up to the study of the 
different knitting machines, knitting men's, ladies', children's and infants' 
hose and garments; method of handling and keeping account of goods 
through the mill; cost of manufacturing from yarn to the box. 

Instruction is also given in cotton yarn preparation — yarn calculations, 
cotton sampling, mechanics, steam engineering, chemistry and dyeing, 
the work in these different subjects being arranged to meet the special 
needs of the student. 

The Knit Underwear Manufacturing Course (V) which was offered in 
previous years has been combined, since 1935, with the Knit Goods Man- 
ufacturing Course. 


Carding and Spinning Course (VI) 

First Year 

First Term 
Picking, Carding, Roving 300 (liy 2 

Mechanical Drawing 172 (3 hrs.). 
Chemistry 182 (6% hrs.). 
Knitting 301 (4% hrs.). 
Yarn Calculations 121 (iy 2 hrs.). 
Principles of Mechanics 171 (1 hr.). 
Slide Rule 170 (1 hr.). 
Designing and Cloth Analysis 131 

(3y 2 hrs.). 

Second Term 
Drawing, Spinning, Doubling and 

Drafting 302 (13% hrs.). 
Cloth Analysis 152 (3 hrs.). 
Machine-shop Practice 174 (3 hrs.). 
Mechanical Drawing 172 (3 hrs.). 
Textile Chemistry and Dyeing 222 

(6V 2 hrs.). 
Knitting 301 (3% hrs.). 

Second Year 

First Term 
Combing and Twisting 303, 304 (10 

Cloth Analysis 153, 154 (3y 2 hrs.). 
Knitting 301 (3M> hrs.). 
Rayon Processing 296 (3% hrs.). 
Dyeing 223 (6y 2 hrs.). 
Machine Drawing 173-175 (2 hrs.). 
Machine-shop Practice 174 (3 hrs.). 
Steam Engineering 176 (1 hr.). 

Second Term 
Spinning, Twisting and Cotton 

Classing 304 (9 hrs.). 
Cloth Analysis 155 (3% hrs.). 
Knitting 301 (3% hrs.). 
Testing 295 (4 hrs.). 
Textile Chemistry 234 (6% hrs.). 
Machine Drawing 175 (2 hrs.). 
Machine-shop Practice 174 (3 hrs.). 
Steam Engineering 176 (1 hr.). 

Third Year 

First Term 
General Test Work and Roll Cover- 
ing 305 (19y 2 hrs.). 
Designing 131 (1% hrs.). 
Knitting 301 (3y 2 hrs.). 
Rayon Processing 296 (3 hrs.). 
Elementary Electricity 177 (2 hrs.). 
Machine-shop Practice 174 (3 hrs.). 

Second Term 
Yarn Testing and Comber Reneedl- 

ing 306 (19y 2 hrs.). 
Knitting 301 (6% hrs.). 
Rayon Processing 296 (2 hrs.). 
Mill Engineering 178 (3 hrs.). 
Cost Finding 179 (1% hrs.). 

Carding and Spinning Course 

The course in carding and spinning is designed to give the student a 
thorough knowledge of cotton yarn manufacture. 

The larger part of the students' time is devoted to instruction on the 
different machines used in the preparation of cotton yarn. 

Instruction is also given in knitting, mechanics, steam engineering, 
chemistry and dyeing. Considerable time is given to knitting, as that in- 
dustry is closely related to cotton yarn manufacture. 

This course is recommended to those students who intend to become 
connected with cotton yarn mills or to become cotton yarn salesmen. 

Testing and Fabric Analysis Course (VII) 

First Year 

Second Term 
Cotton Yarn Preparation (3% hrs.) 
Cotton Yarn Testing (3 Ms hrs.). 
Cotton Sampling (2 hrs.). 
Weaving (3% hrs.). 
Cloth Analysis (3 hrs.). 
Designing (IV2 hrs.). 
Hand Loom (iy 2 hrs.). 
Textile Fabrics (3 hrs.). 
Color (iy 2 hrs.). 
Rayon Testing (3 hrs.). 
Microscopy (6V2 hrs.). 


Second Term 
Advanced Calculations and Figur- 
ing Costs (2 hrs.). 
Cotton Yarn Testing (5 hrs.). 
Weaving (3 hrs.). 
Designing (3 hrs.). 
Cloth Analysis (3% hrs.). 
Jacquard Designing (3% hrs.). 
Rayon Testing (3 hrs.). 
Economics (iy 2 hrs.). 
Merchandising (IV2 hrs.). 
Microscopy (3y 2 hrs.). 
Styling (iy 2 hrs.). 
Knitting (iy 2 hrs.). 

Testing and Fabric Analysis Course 

This course is designed for those who have had a high school education 
and wish to prepare themselves for testing or mill office work. It is ar- 
ranged to give the student a knowledge of all the different processes in 
the manufacture of yarn and cloth and the finishing of the same. It covers 
all calculations required in laying out draft schedules, production costs, 
cloth construction and designing and all testing and research work re- 
quired in cloth manufacture and finishing. 

This is a certificate course and can be completed in two years. 

Mechanical Course (IX) 

First Year 

First Term 
Cotton Yarn Preparation (3 hrs.). 
Cotton Yarn Testing (2 hrs.). 
Weaving (3% hrs.). 
Yarn Calculations (1% hrs.). 
Rayon Testing (3M> hrs.). 
Rayon Processing (3% hrs.). 
Cloth Analysis (6 hrs.). 
Designing (iy 2 hrs.). 
Hand Loom (iy 2 hrs.). 
Color (2 hrs.). 
Slide Rule (1 hr.). 
Microscopy (3% hrs.). 

First Term 
Cotton Yarn Preparation (3% hrs.) 
Cotton Yarn Testing (3 hrs.). 
Weaving (3 hrs.). 
Designing (3% hrs.). 
Cloth Analysis (3% hrs.). 
Jacquard Designing (3% hrs.). 
Rayon Testing (4 hrs.). 
Economics (iy 2 hrs.). 
Merchandising (1 hr.). 
Microscopy (6 hrs.). 

First Term 
Shop Mathematics 169 (3 hrs.). 
Mechanical Drawing 172 (10 hrs.). 
Machine-shop Practice 174 (18y 2 

Slide Rule 170 (1 hr.). 


First Term 

Steam Engineering 176 (3y 2 hrs.). 

Elementary Electricity 177 (2 hrs.). 

Machine Drawing and Mechanism 

175, 173 (14 hrs.). 
Machine-shop Practice 174 (13 

Second Term 
Shop Mathematics 169 (3 hrs.). 
Mechanical Drawing 172 (9% hrs.). 
Machine-shop Practice 174 (20 


Second Term 
Steam Engineering 176 (3y 2 hrs.). 
Machine Drawing and Design 175 

(10 hrs.). 
Elementary Electricity 177 (3y 2 

Machine-shop Practice 174 (15y 2 



Mechanical Course 

The mechanical course is arranged for those students who have a 
natural leaning towards mechanical things. A practical knowledge of the 
mechanical side of a textile mill may be obtained by those attending this 

During the first year all of the students spend the same amount of 
time in the various subjects, but during the second year the major part 
of the time can either be spent in the machine shop or the drafting room. 

A certificate course can be completed in two years, and, if the student 
so desires, he may specialize for another year either in the drafting room 
or the machine shop. 

This course will fit the students to enter engineering offices, drafting 
rooms, machine shops, planning departments of various machine builders 
and other lines of employment. 

Rayon Preparation Course (X) 

First Year 

First Term 
Rayon Processing 296 (6 hrs.). 
Cloth Analysis 151 (3 hrs.). 
Designing 131 (1% hrs.). 
Hand Loom 161 (1% hrs.). 
Weaving 112 (6y 2 hrs.). 
Yarn Calculations 121 (l 1 /^ hrs.). 
Chemistry 182 (7 hrs.). 
Mechanical Drawing 170, 172 (3% 

Principles of Mechanics 171 (1 hr.). 
Slide Rule 170 (1 hr.). 

Second Term 
Rayon Processing 296 (6% hrs.). 
Cotton Warp Preparation 122 (3V 2 

Cloth Analysis 152 (3 hrs.). 
Designing 132 (iy 2 hrs.). 
Hand Loom 161 (iy 2 hrs.). 
Weaving 112 (6y 2 hrs.). 
Textile Chemistry and Dyeing 222 

(6y 2 hrs.). 
Mechanical Drawing 172 (3% hrs.) 

Second Year 

First Term 
Rayon Processing 296 (6% hrs.). 
Rayon Testing 297 (3% hrs.) 
Microscopy 298 (3% hrs.). 
Cloth Analysis 153 (3 hrs.). 
Designing 133 (3 hrs.). 
Color 145 (2 hrs.). 
Weaving 113 (3 hrs.). 
Dyeing 223 (4% hrs.). 
Machine Drawing 173, 175 (2y 2 

Steam Engineering 176 (1 hr.). 


Second Term 
Rayon Processing 296 (6y 2 
Color 146 (1% hrs.). 
Microscopy 298 (3% hrs.). 
Cloth Analysis 154 '(3% hrs.). 
Designing 134 (3 hrs.). 
Weaving 114 (5 hrs.). 
Textile Chemistry 234 (6% hrs.) 
Machine Drawing 175 (2 hrs.). 
Steam Engineering 176 (1 hr.). 

Rayon Preparation Course 

This course is designed to give the student the fundamental knowledge 
of the different processes entering into the construction of cloth made of 
rayon yarns. 

During the first year the student studies rayon processing from skein 
to warp and filling packages, rayon testing, weaving, designing and cloth 
analysis. The study of mechanics, mechanical drawing, slide rule, chem- 
istry and yarn calculations is also pursued in the first year. 

In the second year rayon processing, rayon testing, weaving, designing 
and cloth analysis are continued. Dyeing is started in the first year and 
continued in the second year. Color and microscopic work are taken up 
in the second year. 


This course is so arranged that the student will be qualified to enter 
any branch of the rayon textile business. 

This is a certificate course and can be completed in two years. 


101. Pickers and Cards 

Cotton yarn mill machinery. Lists of processes in cotton mills for dif- 
ferent numbers of yarn. Proper sequence of processes. 

Objects of blending cotton. Methods of mixing same. Bale breakers. 

Picker rooms. Automatic feeders. Construction of different varieties 
of feeders. Their capacity and suitability for the purpose intended. 

The cotton opener, its use and object. Various styles of openers. Set- 
ting and adjustment of openers. Connection of feeders to openers. The 
various styles of trunks. Calculations in connection with openers. 
Breakers. Intermediate and finisher lappers. Different styles and makes 
of machines. Use and object of the lapper. Construction of aprons, 
beaters, bars, screens, fans, lap heads, evener and measuring motions, 
etc. The setting and adjustment of lappers. Calculations in connection 
with lappers. 

The revolving flat card. Its principal parts described, including feed, 
licker, cylinder, doffer, coiler, screens and flats. Different setting arrange- 
ments. Speeds of different parts. Top flat cards, roller and clearer, and 
other cotton cards. Clothing, grinding, setting and stripping cards. 

102. Cards and Drawing Frames 

Study of the card continued. 

The railway head as used either independently or combined with sec- 
tions of cards. Single and double railway heads. Eveners, draft calcula- 
tions, metallic and other rolls. 

Method of arranging and constructing drawing frames. The use and 
objects of the frame. Gearing, weighting, stop-motions, varieties of rolls, 

103. Roving Frames, Spinning Frames and Twisters 

Slubbers. First and second intermediates. Roving or jack frames. The 
construction and use of the fly frame. Description and use of the differ- 
ent parts. Calculations in connection therewith. Changing and fixing 
frames, etc. 

The spinning frame. Its construction and use. Its principal parts, such 
as creels, rolls, rings, travelers, speeds, builder motions, etc. 

The objects of twisting. Wet and dry twisting. The direction and a- 
mount of twist in different ply and cord threads ; different methods used 
in preparing yarn for twisting. Size of rings and travelers for different 
counts of yarn. Methods of winding, speeds and production. 

104. Doubling and Drafting 

Figuring the number of doublings and drafts from picker to spinning 
frame or mule. 

Calculations for schedules of machinery required for different counts 
and amounts. Cost and production of yarn. 

Practice work consists of carrying work through picker to spinning 

105. Combers and Mules 

The sliver and ribbon lap machines. Construction of American and 


English machines. Methods of operating same. Setting and adjusting 
same, and calculations in connection therewith. 

The cotton comber. The construction of the comber, its use and objects, 
Comber setting. Comber calculations. Operation and management of 

The spinning mule and its uses. The special features of the mule. De- 
scription of the head stock, the cam shaft, mule carriage and other parts. 
The construction and use of each part of the mule. Different movements 
in the mule and the timing of the same. The copping rail and the building 
of a cop. Faults in mule spinning and their correction. Mule calculations. 

106. Thesis 

Original work in laying out processes for different counts of yarn, and 
carrying the same through from raw cotton to finished yarn. Tests for 
different processes. Methods of testing from bale to finished fabrics. 

107. Raw Cotton 

Raw cotton. Its varieties. The cultivation of cotton. The preparation 
of cotton for the market. Cotton ginning. Cotton as an article of com- 
merce. The selection of cotton, its suitability for different purposes. 

108. Merchandising 

Products, trade marks, markets, distribution, broker, commission house, 
advertising, seasons, pricing, market analysis, business policies, price 

109. Economics 

Problems in textile management, production, labor relations, social ac- 
cident and fire insurance, stabilization, business policies, depreciation and 
obsolescence, financial setup, balance sheets, taxes, tax returns. 

111. Plain Looms 

The construction of the plain loom. The principal movements in weav- 
ing. Methods of shedding. Shedding motions. Shedding by cams. Aux- 
iliary shafts. Variety of cams. Construction of cams. Timing cams and 
effect on the cloth. 

Picking motions. Different methods of picking. Shuttles. Shuttle 
boxes. Shuttle guards. Protector motions. Reeds. Let-off motions. Take- 
up motions. Calculations in connection with take-up motions. 

Filling-stop motions. 

Temples. The various makes and their uses. 

The Draper loom. Special features of its construction. 

Automatic shuttle and bobbin changing looms. 

Special features of the various makes of looms including Crompton & 
Knowles, Whitin and Stafford looms. 

The management, operation and fixing of looms. Putting in warps. 
Faults and remedies in weaving and fixing. Calculations directly con- 
nected with plain looms. 

Looms adapted to weave twills and satins. 

Mechanical warp stop-motions. 

112. Fancies 

Looms adapted to weave fancy cloth with dobbies. Dobby construction, 
timing and setting for single and double index dobbies. Chain pegging 
for dobbies. 



i— i 

i — i 

















Tying in and starting up warps for which the student has worked out 
some design. Timing and setting and practical work on 2 x 1 box looms. 

113. Box Looms 

Looms for the use of various colors of filling. Drop box motions. Box 
chain multipliers. Multiplier motions. Still box motion. 

114, 115. Special Loom Attachments 

Dobby looms combined with other motions for special purposes, such as 
looms adapted to weave lenos with cotton and wire doups and all modern 
equipment, checks, blankets, handkerchiefs, towels and other goods. 

Draper looms. Practical setting of the magazines, feeler and warp stop 

Stafford and Automatic looms. Practical setting of the magazines, 
feeler and warp stop motions for shuttle changing and bobbin changing 

Crompton & Knowles Automatic 4x1 Box looms. Practical setting of 
the magazine, multipliers and warp stop motions. 

116. Jacquards 

The principle of construction of Jacquard machines. Single and double 
lift machines. Jaquard machines for special purposes. Principles of har- 
ness tying. Practical work in cutting cards and weaving the student's 
own designs. 

117. Dobby Automatic Looms 

Dobby automatic looms adapted to weaving ginghams, crepe effects and 
handkerchiefs. Special features of their construction. Practical work 
with modern wire doup lenos. 

Suggestions for the management of the weave room. 

121. Yarn Calculations 

Definitions. Calculations for finding length, weight or counts of single 
yarns, whether cotton, woolen, worsted, silk, etc. Ply yarns. 

122. Spoolers, Warpers and Slashers 

Various methods of preparing cotton warps. 

The spooler, its use and construction. Production per spindle. Spindle 
speeds. Builder motions. Thread guides. Different makes of spoolers. 

The operation and setting of the spooler. 

Warpers. The object of the warper. Its construction and operations. 
Speeds, settings, etc. Warpers with and without cone drive. Warper slow 
motions. Faults in warping and their correction. 

The slasher. Its use. Construction of the different parts of the slasher. 

Sizing or dressing yarns. Materials used. Methods of mixing same. 
Suitable materials for various purposes. 

Preparing the warp for the loom. The construction of reeds and har- 

Variations from the above system for special purposes, such as used in 
gingham and other mills. 

131. Designing 

Definitions of the words and terms used in designing and analysis. 
Characteristics of the various classes of fabrics. Design paper and its 


application to designing and analysis. Cloth structure, with a study of 
the various sources from which the patterns of fabrics are obtained. 
Twills. Wave effects. Diamonds. Sateens. Granites. Checkerboards. 
Rearranged twills. Figured twills. 

132. Designing 

Designing for single fabrics continued, such as honeycombs. Mock and 
imitation lenos. Entwining twills. Spots weaves arranged in various 
orders. Cord weaves. Imitation welts. Elongated twills. Check effects. 
Corkscrew weaves. Four change system of designing. Damask weaves. 

133. Designing 

Designing for more complicated fabrics, such as figure fabrics, using 
extra materials. Fabrics backed with extra material. Fabrics having the 
face and back of different material or pattern. Double plain fabrics. Re- 
versible fabrics. Embossed effects, such as Bedford cords, piques, Mar- 
seilles weaves. 

134. Designing 

Designing for leno, pile and lappet fabrics, such as methods of obtain- 
ing leno patterns. Mechanical appliances for the production of lenos, yoke 
and jumper motions. Bottom doups. Top doups. Check lenos. Jacquard 
leno-effects. Weaving with wire doups. Weaving with the bead motion. 
Russian cords. Marquisettes. Full turn lenos. 

Pile fabrics, such as velveteens, corduroys, velvets, plushes, carpets, 
terry toweling. 

Lappet weaves. Description of the various lappet motions. Designing 
for original lappet effects. Reproduction of woven lappet patterns. Chain 
drafts, Locking motions. Spot effects. 

135. Jacquard Designing 

Design paper. How to figure the design paper necessary to reproduce 
any Jacquard pattern. Defects of Jacquard patterns and how to avoid 
them. Transferring designs to plain paper. Transferring sketches to 
design paper. Changing the sley of Jacquard fabrics. Method of casting 
out. Ground weaves. Rules for finding sley, pick, warp and filling. Foun- 
dations upon which Jacquard patterns are based. 

136. Jacquard Designing 

Different methods of making designs. Sketching original designs by 
the different methods commonly used. Working out the sketches upon 
design paper. Cutting cards on the piano card-cutting machine. Card 
lacing. Weaving of at least one original design. Method of weaving Jac- 
quard leno designs. Mechanisms required in weaving Jacquard lenos. 
Making Jacquard leno designs. 

Harness tying. Various systems of tying Jacquard harnesses. Lay-over 
ties. Center ties. Compound ties. 

145. Color 

Theory of colors. Complementary colors. Hue, value and chroma scales 
Practical work in color scales. 

146. Color 

Munsell system of coloring. Color harmony, color effects. Analyzing 
color effects. Practical work in making sequences and in producing colored 


151. Analysis 

Standard methods of representing harness and reed drafts. Harness 
drafts on design paper. Written harness drafts. Chain drafts. Layout 
plans. Finding weight of warp yarns, weight of filling yarns. Yards per 
pound of cloth. 

152. Analysis 

Finding counts of warp and filling by various methods. Finding yards 
per pound of cloth from a small sample by weighing. Making original 
designs and weaving them on the power loom. Reproduction of woven 

153. Analysis 

Analyzing more difficult samples. Finding average counts. Percentage 
of each material. Production of loom. Price per yard for weaving. Weav- 
ing of more difficult original designs. 

154. Analysis 

Analysis of leno fabrics, making both written drafts and harness drafts 
on design paper. Chain drafts. Weaving of original leno designs. Chang- 
ing the construction of fabrics and preserving balance of structure. 

155. Analysis 

Analysis of more difficult samples continued. Weaving of original 
samples. Work on changing over samples to different constructions. 

156. Analysis 

Continuation of the work outlined in 155. Weaving of students' original 
Jacquard designs. Work on cost of manufacturing fabrics. 

157. Commission House Work 

Study of common fabrics. Application of cloth analysis to the require- 
ments of a converter or of a commission house. 

Methods of ascertaining counts of warp and filling; also sley and pick 
for new fabrics. 

Determining the cost of fabrics. 

158. Styling 

This is a continuation of analysis. Changing the construction of fab- 
rics. Making sketches for alteration of fabrics. Finding cost of fabrics. 

159. Textile Fabrics 

A study of fabrics in common use, showing how they differ. A study of 
fabrics used for different purposes. 

A study of materials and yarns used in the construction of fabrics. 

161. Hand Loom 

The hand loom, its construction and use. Harness drafts as affecting 
the weave. Building harness chains. Practice on the hand loom in weav- 
ing fabrics from original and other designs, and putting into practice the 
designing lessons. 

169. Shop Mathematics 

Shop mathematics consists of a review of arithmetic for those who have 
only an elementary knowledge of mathematics and then branches out in 
the various standard formulas and data that are necessary for every 


mechanical superintendent to know. It deals with shop, drafting room, 
steam and electrical trades. 

Various subjects such as trigonometry, logarithms, graphical charts, 
strength of materials, gearing and mechanisms, etc., are taken up in the 
class room. 

Textbook: "Industrial Mathematics," Farnsworth. 

170. Slide Rule 

Detail instruction is given in the class room on the use of the slide rule, 
so that the students may thoroughly learn how to operate and read the 
slide rule in order to solve all of the practical problems arising in their 
various classes. 

171. Mechanics 

The fundamental principles of mechanics and physics, with special ref- 
erence to practical uses in textile machinery and to future application in 
the engineering courses, are given in a series of lectures. Practical prob- 
lems illustrating these principles are worked out in the class room. A 
study is also made of the strength and nature of the different materials 
used in machine construction. 

Textbook: "Practical Mechanics," Hale. 

172. Mechanical Drawing 

The object of this course in mechanical drawing is to give the student a 
good foundation for reading drawings and for making such sketches and 
drawings as he will be likely to be called on to make in practice. Thor- 
oughness, accuracy and neatness are insisted upon throughout the course. 
The work in mechanical drawing begins with instruction in the use and 
care of drawing instruments. The following is a general outline of the 
work to be covered: plain lettering, geometrical constructions, ortho- 
graphic and isometric projection, inking and tracing, standards, conven- 
tions and tabulation as used in the modern drafting room. Simple work- 
ing drawings are to be made to scale, and the final work of the year con- 
sists of free-hand sketching of machine details from parts of textile 
machinery. This brings into use at one time all the work covered during 
the year, and serves as a test of the student's grasp of the subject. 

Textbook: "Technical Drawing," Giesecke, Mitchell and Spencer. 

173. Mechanism 

In view of the large number of mechanisms used in textile machinery 
this course is a very important one. The subject is given by means of 
lectures and recitations, the work in the drawing room being closely re- 
lated to the classroom instruction. This course includes studies and 
graphical solutions of cams, gears, etc. 

174. Machine Shop 

Shopwork and drawing are organized as one department for the pur- 
pose of securing close correlation of the work. Many exercises are com- 
mon to the drawing room and the shop. In the machine shop an effort is 
made, not only to train the student manually, but also to teach him correct 
shop methods and practice. Carefully graded exercises are arranged to 
teach him the use of measuring instruments, hand tools and then ma- 
chine tools. The different measuring tools and devices, with advantages, 
methods of use and limits of accuracy of each, are considered. Each cut- 
ting tool is taken up, its cutting angles and general adjustments are 
described, together with the "feeds" and cutting speeds suitable for each 


material worked and for each machine. The course includes instruction 
in centering, squaring, straight and taper turning and fitting, outside and 
inside screw cutting, chucking, reaming, finishing and polishing, drilling, 
tapping, grinding, boring, planing flat and V surfaces, filing and gear 
cutting, including spur, bevel, rack and worm gears. 

When the student becomes proficient in handling the tools and machines, 
he is given work in fitting and assembling, and also repair work from 
other departments. 

175. Machine Drawing 

Machine drawing is a continuation of the mechanical drawing of the 
first year, and the work is dependent upon a thorough knowledge of how 
to apply the conventions of drawing which custom has made standard as 
given during the first year. The work consists of proportioning of ma- 
chine details as fixed by practice, making assembly drawing from detailed 
sketches, and also detailing parts from assembled machines. 

176. Steam Engineering 

A typical power plant, including the boiler, steam engine and all neces- 
sary auxiliary apparatus such as is found in a modern cotton mill, is 
studied in detail. Prepared outlines are discussed in lecture periods, and 
the details supplied by the student after reading assignments in standard 
text and reference books. Practice is given in handling engines, apparatus 
and equipment in the laboratory. Exercises consist in adjusting, starting 
and running engines, taking and working out indicator cards, prony brake 
tests, pump and injector tests, etc. 

177. Elementary Electricity 

The elementary principles of magnetism and electricity are taken up in 
lecture and recitation, and are supplemented by laboratory exercises. 
Emphasis is placed on the different wiring systems and electric drives as 
used in mills and factories. A general study is made of a typical electrical 
power plant, and of the apparatus required to generate and distribute 
electrical energy. 

Textbook: "Essentials of Electricity," W. H. Timbie. 

178. Mill Engineering 

Proficiency in this course depends on the thoroughness with which the 
work of the previous courses was carried on. The course consists of lec- 
tures supplemented by work in the drafting room. Problems in design, 
construction and equipment of mills and factories are taken up. The 
subject includes foundations, walls, floors, roofs and mill construction in 
general. The choice of location and the methods of transmitting power 
are discussed. The following outline shows the scope of the course : prin- 
ciples underlying the design and construction of framed structures, in- 
volving the use of wood, steel, brick, stone, concrete and reinforced con- 
crete, methods of lighting, ventilating and protecting from fire. 

179. Figuring Costs 

Methods of cost finding in a cotton mill. A complete mill is taken for 
an illustration, and the reports of both the expense and production are 
used to work with. 

181. General Chemistry 

This course comprises three lectures of one hour each and nine and one- 
half hours of laboratory work each week. The laboratory work is closely 
criticized by the instructor, and individual effort encouraged. Careful 


manipulation, thoroughness in observation, accuracy in arriving at con- 
clusions and neatness are required of each student. The fundamental 
principles of the science are taught in connection with the descriptive 
chemistry of the elements. 

No previous study of chemistry is required for admission to this course, 
but the instruction is so arranged that students having already spent 
considerable time in chemistry in other schools are given advanced work 
in which the knowledge already acquired is utilized. 

Textbook: Smith's "College Chemistry." 

182. General Chemistry 

The training afforded by a course in general chemistry is considered of 
value to all the students of the school and also lays the foundation for the 
subsequent course in dyeing. Hence, students taking courses in the cotton 
or knitting departments are required to take general chemistry during the 
first term of the first year. This subject covers the same ground as sub- 
ject 181, but in a briefer manner. Five hours per week are spent in the 
laboratory and one hour in the lecture and recitation room. 

Textbook: Smith's "Elementary Chemistry." 

183. Inorganic Preparations 

The time in this subject is devoted largely to laboratory work, with an 
occasional explanatory lecture. First the student is taught the best 
methods of carrying on the usual laboratory operations, as forming of 
crystals, precipitates, filtering, evaporating and drying. This is followed 
by the preparation of several salts and industrial products, substances 
being selected that are of particular interest to the textile industry. The 
work is progressive in subject-matter, and so arranged as to be co-ordi- 
nate with the subject of general chemistry. 

Textbook: Blanchard's "Synthetic Inorganic Chemistry." 

191-192. Qualitative Analysis 

This course comprises one lecture of one hour and twelve hours' labora- 
tory work a week during the second term of the first year. The student 
is taught the principle of systematic qualitative analysis and the applica- 
tion of the principles to detect the base-forming elements, the acid-form- 
ing elements, and the various classes of compounds of the bases and the 
acids. Especial attention is paid to the inorganic materials ordinarily 
met with in the manufacture, dyeing and finishing of cotton piece goods. 
The student is required to analyze correctly a sufficient number of un- 
known substances to demonstrate his ability to detect any of the elements 
ordinarily met with. 

Textbook: Noyes' "Qualitative Analysis." 

202. Quantitative Analysis 

The course in Quantitative Analysis is divided into two parts, each re- 
quiring one term for its completion. Stress is laid on the. accuracy and 
integrity necessary for quantitative work. Each student is required, 
under supervision of the instructor, to adjust his own balances, and cali- 
brate the weights, burettes, flasks, etc., that he uses, that he may under- 
stand the nature and amount of error in his work, thus giving him confi- 
dence in his results. In connection with the course a thorough training 
in the solution of chemical problems is given. The course comprises one 
lecture each week, the remainder of the time being devoted to laboratory 
practice. The term is spent in volumetric analysis involving the use of 
acids, alkalis, oxidizing and reducing agents and chlorimetry. 

Textbook: Talbot's "Quantitative Analysis." 

203. Quantitative Analysis 

This course is a continuation of Course 202 and comprises gravimetric 
determination of chlorine, sulfuric, carbonic and phosphoric acids, and 
iron, aluminum, calcium and magnesium. The work on chemical problems 
is also continued through this term, the problems being such as to apply 
the principles of gravimetric analysis. 

Textbook: Talbot's "Quantitative Analysis." 

212. Organic Chemistry 

This course is divided into two terms, the first term giving a general 
survey of the subject, a thorough training being given in the reactions 
and properties of the various compounds met with in textile industries. 
The two lower members of the paraffines and their derivatives are ex- 
haustively treated. Then the study of the higher members is taken up, 
the unsaturated hydro-carbons and their derivatives. 

Textbook: Conant's "Organic Chemistry." 

213. Organic Chemistry 

The work of the second term is devoted exclusively to the study of dye- 
stuffs and their preparation. The constitutions of various typical dye- 
stuffs are studied to determine their influence on coloring power, dyeing 
properties and fastness to light, acids, alkalis, bleaching, etc. In the 
limited time afforded, the number of dyestuffs studied is necessarily 
limited, but the training is made so thorough that the student is enabled 
to take up further investigation intelligently should his future work 
demand it. 

222. Textile Chemistry and Dyeing 

These subjects open with a study of the chemical and physical tech- 
nology of the fibres. Lectures are given descriptive of the action of heat, 
moisture, acids, alkalis, oxidizing agents, reducing agents, salts, organic 
ferments and coloring matter upon the fibres. Parallel with these lectures 
laboratory experiments are carried out by the performance of which the 
student becomes familiar with the chemical and physical properties of 
the various fibres and the actions of the several agents upon them. 

This is followed by a series of lectures and experiments that illustrate 
the application of the above principles to practice. The student is taught 
how to scour cotton, wool and silk; how to bleach these fibres by the use 
of sulphur dioxide, chlorine compounds and oxygen compounds. The mer- 
cerizing, fireproofing and waterproofing of cotton, the chlorination of 
wool, and the waterproofing of silk are also demonstrated. 

Now the application of the dyestuffs to the various fibres is studied. 
For convenience the dyestuffs, whether of natural or synthetic origin, are 
classed as either substantive, acid, basic or mordant. The best method of 
application of each of the above groups is then taught. The dyed fibres 
are tested for their fastness to light, water, acid, alkalis, milling, stoving, 
chloring, crocking and hot finishing. Modified methods are then con- 
sidered for the production of especial degrees of fastness to certain agents 
by after-treating of the dyed fibres. 

223. Dyeing 

This course is supplementary to the course in textile chemistry and 
dyeing and consists principally in the application of dyes to cotton and 
rayon. Lectures are given as the occasion requires, but most of the time 
is spent in the laboratory. 


Samples acquired in connection with the laboratory practice are moun- 
ted and bound with the above notes, which they serve to illustrate. 

224. Dyeing 

The laboratory work of this term is mainly devoted to the printing of 
textile fabrics, especial emphasis being laid on cotton. The theory and 
practice of the various styles, such as the pigment style, the direct printing 
style, the steam style, or metallic or tannin mordants, lesist and discharge 
dye styles, the developed azo style, the printing of indigo and similar dye- 
stuffs and aniline black are studied. The student makes as many different 
prints as the time will allow. During the entire course the student ac- 
cumulates many samples which he is required to mount in a specially 
designed sample book for his reference in the future. Special stress is 
laid on quality rather than quantity of work done. 

225. Dyeing 

During the course the general principles of cotton matching are taken 
up, and experimental work is carried on demonstrating the proper method 
of obtaining a given shade by mixing several dyes. Obtaining the value 
of a dye is taught, and the detection of adulterants. Finally, methods for 
determining the dye, either in the form of a dyestuff or on the dyed 
fabric, are considered. 

Construction and operation of jiggers. Speed of operation. Penetration 
of solutions used. Selection of dyestuffs. Preparation of dye liquor. Dye- 
ing, washing and after-treating. 

Construction of dye padders. Selection of material for rolls. Speed of 
machines. Penetration of materials. Selection of dyestuffs. Washing off. 

226. Dyeing of Knit Goods 

The object of this course is to give the student an opportunity to dye 
commercial size lots of knit goods and hosiery. Lectures describing the 
various processes are given, and the necessary calculations are taught in 
connection with this course. Scouring and bleaching are also taught. The 
student is required to make use of knowledge acquired in the previous 
courses in dyeing. 

230. Cotton Manufacture 

Cotton Manufacture is the name assigned to a course of lectures given 
to the second year students in chemistry, so that they may become ac- 
quainted with the methods employed in the manufacture of cotton yarn 
and cloth. The various machines are thoroughly described and the meth- 
ods of using them discussed in the lecture room. Because of the limited 
amount of time allowed for this subject the students are not taught to 
operate the machines, but are given an opportunity to examine them at 
rest, and later to observe them in operation. 

233. Textile Chemistry I 

This subject comprises a study of the properties and analysis of soap, 
mordants and other chemicals used in the textile industries. One lecture 
of forty-five minutes' duration is given each week, and frequent confer- 
ences are held with the student in the laboratory. The student is required 
constantly to consult standard books of reference in connection with his 
laboratory work. While the limited time devoted to this course does not 
give enough time for the student to make many complete analyses, it does 
illustrate to him the application of the knowledge acquired in the previous 
subjects of qualitative and quantitative analysis and organic chemistry. 

234. Textile Chemistry II 

This subject deals with coal, oil, soap, water, starches, sizing and soft- 
ening compounds and textile fabrics. The commercial methods of obtain- 
ing the above substances, their usual composition and application, is dis- 
cussed in lectures. The laboratory work consists of the analysis of typical 
compounds, obtained from the consumers when possible. The detection of 
the various starches and fibres by the microscope is taught, and their 
separation and estimation by chemical methods. Sizing and loading of 
fabrics is also discussed. This course is very practical in its application, 
and accurate work is required. 

235. Finishing of Cotton Fabrics 

The object of this course is to give to the designer a knowledge of the 
various methods used in finishing, and the effect of the same on the ap- 
pearance and construction of the fabric. Simple methods of distinguish- 
ing between different fibres and finishes filled and pure starched cloths, 
are taught. The instruction is given by means of one lecture a week and 
two hours' laboratory practice. 

240. Singeing 

Construction of machine. Function of air pump. Adjustment of gas. 
Speed of operation. Singeing for a face finish. Singeing for a body finish. 
Determination of best conditions for a particular cloth. 

241. Scouring 

Construction of kiers. Methods of circulation. Packing of goods. Time 
of boiling. Washing down. Use and operation of washing machines. 
Choice of scouring agent. 

242. Bleaching 

Construction of chemic vats and cisterns. Application of bleaching 
solution to the goods. Squeezers. Piling down. Precautions to prevent 
tendering action of bleaching agent. Washing. Use of "Antichlors." 
Openers and scutchers. Selection of bleaching agent. 

245. Mercerizing 

Construction of mercerizing machine. Design of tenter clips. Proper 
tension in tenter frame. Removal of caustic by washing. Neutralization 
of last traces. Variation in conditions to suit cloth treated. 

250. Drying 

Preparation of goods for drying. Importance of proper mangling. Con- 
struction and operation of a mangle. Construction of the drying cylinders. 
Mechanical limits of speed of operation. Best speed in view of results 
obtained on goods. Static electricity and its grounding. 

Construction and use of tenter frames. Methods of heating, direct and 
indirect. Direction of air currents in relation to that of the cloth. Con- 
ditions giving the most rapid drying; the best width. Choice of tenter 
clip for a specific purpose. 

255. Calendering 

Types of calenders and various finishes obtained. Construction of a 
simple calender, friction calender, chasing calender. Schreiner and em- 
bossing calenders. Speeds and conditions governing the operation of the 
above machines. Use of scrimp bars and stretchers. Gas and steam heat- 


ing. Metallic rolls, fibrous rolls, and finishes produced by them. Care of 
rolls. Use of water. So-called permanent calender finishes. Use of beetles 
and hot presses for preparation for calendering. Top finishing. 

260. Putting up 

Inspection of goods for faults. Classing as firsts, seconds, thirds and 
remnants. Yarding by flat folding, by rolling machines. Construction and 
operation of these machines. Various folds and put-up required by the 
several trades. Ticketing, banding and papering. Assortment in cases 
and storage of goods. 

269. Thesis 

Each student who is to graduate from the course in chemistry and dye- 
ing must devote twelve hours per week during the last half of his third 
year to original work, and at least one week before graduation must sub- 
mit to the principal of the department a thesis of not less than two thou- 
sand words based upon the results of his own investigations. 

271. Elementary Knitting 

A study of the various types of winding machines used for cotton, wool 
and worsted yarns preparatory to running on the ribbers and hosiery 

Principles of latch and spring needle knitting and a study of the vari- 
ous types of machines used for making rib tops. 

Construction study of the automatic hosiery machines used on coarse 
gauge work including men's, ladies' and children's hose. 

272. Advanced Knitting 

Winding and the preparation of cotton, worsted, rayon and silk yarns 
used in knitting. 

A study of the medium and fine gauge ribbers with draw-string, French 
welt and yarn changing attachments. 

Construction and adjustments used on medium and fine gauge full 
automatic hosiery machines for making plain and fancy pattern hosiery. 

273. Hosiery Finishing 

Fundamental principles and a study of the various types of loopers. 
Rough inspecting and the handling of work preparatory to going to the 
dyeing department. 

A study of the sewing machines used in finishing hosiery, including 
hemming, mock seam, clockwork, etc. 

Cloth analysis and testing of knitting yarns and fabrics. 

274 Hosiery Manufacture 

Mending, drying and pressing. Inspecting, pairing, stamping, folding, 
banding and boxing. 

Scientific management and the handling of goods and records through- 
out the mill and office. 

Cost control and a study of its application to the modern hosiery mill. 

281. Elementary Knitting 

A study of the various types of winding machines used for cotton, 
worsted, merino, rayon and silk yarns used in the manufacture of under- 

Principles of latch and spring needle knitting and a study of the vari- 
ous types of machines used in making cuffs, sleeves and body cloth. 


282. Underwear Cutting 

A study of pattern making and handling of cloth in the cutting depart- 
ment for making a line of men's, ladies', children's and infants' under- 

283. Underwear Finishing 

A study of the various finishes used on underwear. 
Setting up, adjusting and a study of the various types and makes of 
sewing machines used in the manufacture of underwear. 
Cloth analysis and testing of knitting yarns and fabrics. 

284. Underwear Manufacturing 

Mending, inspecting, pressing, folding, banding and boxing of the fin- 
ished garment. 

Scientific management and the handling of goods and records through- 
out the mill and office. 

Cost control and a study of its application to the modern underwear 

293. Miscellaneous Knitting 

Knitting fine French balbriggan cloth, worsted and merino cloth, single 
and double plush cloth, for fleece-lined underwear, made on spring needle 

Sweater knitting, with racked rib and cuffs, pineapple stitch and fancy- 
colored effects, on circular rib machines. 

Full-fashion sweater knitting on the Lamb full-fashion, hand-power 

Knitting gloves on the Lamb hand-power machine. 

Different processes of finishing balbriggan, worsted, merino and fleeced 
cloth into underwear ready for market. 

294. Knitting 

The aim of this work is to give to the student an insight into the class 
of work for which a large part of the yarn in a yarn mill is made. 

The different types of knitting machines are studied, and in each case 
the effect upon the machine and fabric of imperfect yarn is gone into 

295. Testing 

This course is a study of the methods used in the testing of cotton yarns 
and fabrics throughout the mill. It includes atmospheric conditions and 
their effect on testing, determining moisture regain, tensile strength, 
twist, evenness, cleanliness, cloth analysis and identification of textile 

296. Rayon Processing 

Instruction in the winding of skeins and cones on to spools and quills. 
The soaking and the throwing of the yarn. Warping on the silk system 
and slashing. 

297. Rayon Testing 

The analysis of rayon yarns and fabrics. Identification of mixed fibres. 
Methods of finding the percentages of fibres in yarns and fabrics. Methods 
of determining the cause of defects in fabrics. 

298. Microscopy 

The object of this course is to instruct the student in the use and man- 
ipulation of the microscope. Methods of mounting, cross sectioning, mi- 


crometry, camera lucida drawings, measuring and counting are taken up. 

Instruction is also given in photomicrography, that is, the taking of 
photographs through the microscope, in developing and printing, obtain- 
ing the magnifications and enlarging. 

On completion of the above the student is given yarns and fabrics, 
which are unfamiliar to him or which have defects, to analyze. 

300. Picking, Carding and Roving 

Cotton yarn mill machinery. Machines required for making different 
numbers of counts of yarn. 

Picking Room. — Bale breakers or openers, their use and how operated. 

Automatic feeders, their construction, methods of setting and adjust- 
ing; evener motions, calculations. 

Openers, their use and object. The different kinds used and the class 
of cotton for which they are best adapted. The different kinds of beaters 
used, and the speeds at which they should run. 

Cleaning trunks, their uses and operation. 

Breaker, intermediate and finisher lappers. Different styles and makes 
of machines. The construction and operation of the different parts, set- 
ting and adjusting the different parts, and arranging the speeds to give 
the best results. Calculations for speeds, drafts, weights and production 
on the different machines. 

Cards. — The different kinds of cards used ; their construction and oper- 

The revolving flat card. Its principal parts. Different methods of set- 
ting, different settings for different classes of work. The speeds of the 
different parts, and their effect on the quality of the work produced. Con- 
struction of card clothing. Clothing cylinder doffer and top flats. Strip- 
ping and grinding cards. Grinding and testing top flats. Covering grind- 
ing rolls. Splicing driving ropes and belts. 

Calculations for speeds, drafts, production, per cent of waste, etc. 

Roving Frames. — The different processes used. The construction and 
use of the roving or fly frame. 

Speeds of the different size frames and the different parts of the frame. 

The different styles of differentials used and their object. 

Cone drums. The effect of the shape of the cones on the running of the 
frames. Levelling and adjusting roving frames. Balancing flyers, and 
the effect of unbalanced flyers on the running of the frame. 

The effect of draft and twist on the quality and quantity of the work 
produced. Roller setting. Calculations for speeds, drafts, twist, tension 
and lay. Calculations for differentials, cone drums and productions. 

301. Special Knitting 

Operations preliminary to knitting. Winding, cone winding, bobbin 
winding. Development of knitting. Knitting needles. Construction and 
operation of latch and spring needles. Knitting on circular and flat ma- 
chines. Study of the results of uneven, mixed and otherwise imperfect 
yarns in the knitting process, and the effect upon the machine and fabric. 

302. Drawing Rolls and Drawing Frames. Ring Spinning. Doubling and 


Drawing Rolls. — The different kinds of rolls used, their construction, 
methods of covering, setting and adjusting for different kinds of work. 
Clearers for drawing rolls. 

Drawing Frames. — The railway head and evener draw frame. The 
construction and arrangement of drawing frames. Different methods of 


gearing, weighting and stop-motions for draw frames. Calculations for 
speeds, drafts, dividing drafts, production, etc. 

The Ring Spinning Frame. — Its construction and use. The construc- 
tion and adjustment of the different parts, such as spindles, rings, trav- 
elers, rollers, builder motions, etc. Making bands. Comparing different 
drives for spindles. Twist in yarn, its effect on strength and production. 
Calculations for speeds, drafts, twist and production. 

Doubling and Drafting. — Laying out drafts and weights at the dif- 
ferent machines from picker to spinning frame for making different 
numbers of yarn. 

Calculating the number of machines required at the different processes 
to produce a required amount of yarn of different numbers. 

Calculating the labor cost of making roving or yarn, using different 

Calculating the effect of draft at the different machines on the produc- 
tion and cost of the yarn made. 

303. Combing and Mule Spinning 

Sliver and ribbon lap machines. Construction of the different machines. 
Methods of setting and operating same. 

Combers. — The different kinds of combers used; their speeds and pro- 
ductions. Comber setting and adjusting and methods of operating. 

Roll Varnishing. — The percentage scale and its use. Practice work 
in setting and operating the different combers. 

Calculations for speeds, drafts, productions, etc., on the lap machines 
and combers. 

Mules. — The spinning mule and its uses. The special features of the 
mule. Description of the construction and operation of the different parts 
of the mule. Calculations for speeds, drafts, etc., and all calculations re- 
quired in making changes. 

Practice work in laying out and carrying through the work for making 
different counts of yarn from the raw stock to the finished thread. 

304. Twisting and Cotton Classing 

The Object of Twisting. — Different styles of twisters used. Wet and 
dry twisting. Direction of twist. Effect of twist on the strength, weight 
or counts. 

Preparing yarn for twisting. 

Making ply threads, cords, cordonnet and sewing threads. 

Sizes of rings and spindle speeds for different threads. Calculations for 
speeds, twists and productions. 

Cotton Classing. — Different species of cotton plants. 

Cultivation of cotton. The different varieties of cotton and the class of 
goods for which they are best adapted. 

Cotton picking, ginning, baling and marketing. The selection of cotton 
for different classes of goods. 

Cotton grading and stapling. 

Practice work in running work from raw stock to spinning and twisting. 

305. Test Work and Roller Covering 

Test Work. — Testing different classes of cotton and comparing results 
for waste removed and strength of yarn made. Testing different methods 
of handling cotton, using different speeds; drafts and numbers of pro- 
cesses used and comparing results. 

Roller Covering. — Covering top roll and under clearers. 

Cutting, piecing, drawing on, burning down and burnishing. 

306. Yarn Testing and Comber Reneedling 

Yarn Testing. — Testing yarns for weight or counts, breaking weight 
(skein or single). Inspecting yarn, testing for moisture, amount of twist 
in single or ply yarn. Testing for contraction in single yarn ; for contrac- 
tion or expansion in ply threads. Testing for elasticity. 
. . Comber Reneedling. — Cleaning off, setting needles, soldering on, build- 
ing half laps, polishing and finishing same. 

Practical work in running tests through the machines. 


Chemistry Department 

Smith's "Elementary Chemistry," Noyes' "Qualitative Analysis," Tal- 
bot's "Quantitative Analysis," Conant's "Organic Chemistry," Blan- 
chard's "Synthetic Inorganic Chemistry," Smith's "College Chemistry," 
Gill's "Power Plant Chemistry." 

Mechanical Department 

"Practical Mechanics," Hale; W. H. Timbie's "Essentials of Electric- 

"Industrial Mathematics," Farnsworth. 

"Technical Drawing," Giesecke, Mitchell and Spencer. 

Rayon Department 

Rayon and Synthetic Yarn Handbook. 

Other Departments 

No textbooks are used in the departments other than those named a- 
bove. Lectures are prepared by the heads of the departments covering 
the work in detail, multigraphed, and sold to the students at cost. These, 
with design books, design pads, color supplies and notebooks, constitute 
the working material to be provided by students. 


Evening instruction, similar to the day, on the same machinery and by 
the heads of the day departments assisted by practical skilled men from 
the mills, is given for the benefit of workers in local mills and machine 
shops. The instruction in the evening classes is divided into sections so 
as to give the greatest possible facilities to the students in these classes. 

Certificates are granted to all students in the evening classes who have 
successfully completed the equivalent of two years' work, two evenings 
a week. 

If a student attends more than this time, he is granted additional cer- 
tificates for each full year's time of two evenings a week that he spends 
on the various subjects and attains a passing mark therein. Credit to- 
wards a certificate is given to those taking one-night-a-week courses and 
to those attending the morning classes in proportion to the time they 
attend. These certificates state all the subjects that the student has com- 
pleted and the number of years he has devoted to the work. 

Evening students are enrolled at the commencement of both the fall 
and spring terms. The subjects taken up in the different evening courses 
follow the detailed topics as specified on page 31. 

The school is in session four evenings a week for twenty-three weeks. 
— Monday, Tuesday, Thursday and Friday, from 7.30 to 9.15, for all 
classes except those in the Chemistry Department. Those classes are held 


three nights a week, — Monday and Tuesday, from 7 to 9.30, and Thurs- 
day, from 7.15 to 9.15. 

For terms of admission and fees, see page 33 of this catalogue. 


Carding and Spinning Department 

Mill Calculations and Picking: one term, two evenings a week. 

Carding and Drawing: one term, two evenings a week. 

Combing: one term, two evenings a week. 

Roving Frames : one term, two evenings a week. 

Ring Spinning and Twisting: one term, two evenings a week. 

Mule Spinning: one year, two evenings a week. 

Cotton Classing: one term, one evening a week. 

Advanced Calculations in Carding an Spinning: one year, one evening 

a week. 

Women's Textile Preparation Course . ,ne term, one evening a week. 

Weaving and Warp Preparation Departments 

Spooling, Warping and Slashing: one term, two evenings a week. 
Automatic Box Loom Fixing: one term, two evenings a week. 
Plain Loom Fixing: one term, two evenings a week. 
Fancy Loom Fixing: one term, two evenings a week. 
Draper Loom Fixing: one term, two evenings a week. 
Jacquard Loom Fixing: one term, two evenings a week. 
Advanced Calculations in Weaving: one term, two evenings a week. 
Warp Drawing for Women: one term, two evenings a week. 

Designing Department 

Elementary Designing: one term, two evenings a week. 
Advanced Designing: one term, two evenings a week. 
Elementary Analysis: one term, two evenings a week. 
Advanced Analysis : one term, two evenings a week. 
Jacquard Designing: one term, two evenings a week. 

Knitting Department 

Special Knitting : two evenings a week each term. 

Rayon Department 

Rayon Processing. — -Winding, Warping and Slashing: ons year, two 

evenings a week. 

Microscopy : one year, two evenings a week. 

Engineering Department 

Mechanical Drawing: one year, two evenings a week. 
Advanced Drawing: one year, two. evenings a week. 
Machine Drawing : one year, two evenings a week. 
Mechanical Designing: one year, two evenings a week. 
Machine-shop Practice : one year, two evenings a week. 
Advanced Shop Work: one year, two evenings a week. 
Steam Enginering: one year, one evening a week. 

Chemistry Department 

General Chemistry: one year, two evenings a week. 
Qualitative Analysis: one year, two evenings a week. 
Quantitative Analysis: one year, two evenings a week. 


Organic Chemistry: one year, two evenings a week. 
Textile Chemistry I : one year, two evenings a week. 
Textile Chmistry II : one year, two evenings a week. 
Dyeing I: one year, two evenings a week. 
Dyeing II: one year, two evenings a week. 
Dyeing III: one year, two evenings a week. 


Cost Finding: one term, two evenings a week. 

Evening Diploma Courses 

The school diploma will be granted to those students of the evening 
classes who successfully complete the work specified under the following 
courses : — 

I. Carding and Spinning. — Picking, Carding and Drawing, Roving 
Frames, Combing, Ring Spinning and Twisting, Mule Spinning (or some 
other subject), Cotton Sampling, Advanced Calculations in Carding and 
Spinning, Mechanical Drawing, Advanced Drawing. 

II. Weaving and Designing. — Spooling, Warping and Slashing, Plain 
Loom Fixing, Fancy Loom Fixing, Elementary Designing and Cloth Anal- 
ysis, Advanced Designing and Cloth Analysis, Jacquard Designing, Cotton 
Sampling, Mechanical Drawing, Advanced Drawing, Cost Finding. 

III. Chemistry and Dyeing. — General Chemistry, Qualitative Analy- 
sis, Quantitative Analysis, Organic Chemistry, Textile Chemistry I, Tex- 
tile Chemistry II, Dyeing I, Dyeing II, Dyeing III, Mechanical Drawing, 
Advanced Drawing. 

Courses for Women 

Several courses are open for women in the day and evening classes and 
a number have pursued them successfully. They are as follows: — 

Textile Designing. 
Chemistry and Dyeing. 
Cost Finding. 
Testing and Fabric Analysis. 

Cotton Sampling. 

Warp Drawing. 

Rayon Winding and Warping. 

Textile Preparation. 


Cancfidates for admission to the day courses must be at least sixteen 
years of age. Those who have been students of other technical institu- 
tions, colleges or universities are required to furnish a certificate of hon- 
orable dismissal from those institutions. Candidates having a diploma 
from a high school or other educational institution of equal standing are 
admitted without examination. Other applicants for admission to the 
diploma courses are required to pass examinations in arithmetic, English 
and commercial geography and those desiring to enter the Chemistry, 
Dyeing and Finishing Course must pass examinations in elementary alge- 
bra and plane geometry. 

A candidate, whether desiring to be enrolled on diploma or by passing 
the entrance examinations, must fill out an application blank, which should 
be delivered to the school as early as possible before the opening of the 
school year. 

Applicants desiring to take up special studies in the school may be ad- 
mitted provided their applications are approved by the Principal. Such 
students shall be known as specials, and, upon satisfactory completion of 
their work in the school, shall be given certificates stating the work they 
have covered and the time they have been in attendance. 





i— i 






i— i 


No applicant is admitted to the regular courses of the school after the 
first four weeks unless he has already covered the work of the school for 
the time preceding the date of his application; nor shall any change in 
any student's course be made after the first four weeks of admission ex- 
cept by permission of the Principal. 


The examinations for those desiring to enter the school at the opening 
of the fall term of 1938 will be held at the school only, on Wednesday, 
June 8, and on Wednesday, September 7, at 9 A.M. 

The detailed topics dealt with in the entrance examinations are as 
follows : — 


Definitions, addition, subtraction, multiplication, division, factors, mul- 
tiples, cancellation, fractions, decimals, percentage, interest, ratio and 
proportion, square root, compound quantities, mensuration, metric system. 


The candidates will be required to show his ability to spell, capitalize 
and punctuate correctly; to show a practical knowledge of the essentials 
of English grammar, a good training in the construction of the sentence, 
and familiarity with the simple principles of paragraph division and 

He will be required to write a business letter, and one or more short 
articles on subjects assigned from which he may select. Ability to express 
himself clearly and accurately will be considered of prime importance. 

Commercial Geography 

Farm products of the United States, where raised; our mines, and 
where located; our manufactures, and where established; our exports, 
and to what countries ; our imports and from what countries ; our trans- 
portation facilities. 


Literal numbers, positive and negative numbers, addition and subtrac- 
tion of polynomials, parentheses, multiplication of polynomials by mon- 
omials, etc., division of polynomials by monomials, etc., simple equations, 
fractions, graphical representation, linear equations having two un- 
knowns, simple square root and quadratic equations. 

Plane Geometry 

Lines and rectilinear figures, circles, proportion, areas of polygons and 
regular polygons. 


Candidates for admission to evening classes must be at least fourteen 
years of age. 

Those desiring to enter any of the courses in the various departments 
must satisfy the head of the department which they desire to enter that 
they have sufficient knowledge to be benefited by the instruction offered. 


Day Students. — A tuition fee of $20 a year is charged day students who 
are residents of Massachusetts. For non-resident students the fee is $150 
a year, and for students from foreign countries $300 a year. All tuition 


fees are payable in advance in two equal installments, at the opening of 
each semester. No student shall be admitted to the classes until his tui- 
tion is paid. No fees are refunded except by special action of the Board 
of Trustees. 

The above fee includes admission to any of the evening classes in which 
there is accommodation, and which the day students may desire to attend. 

A deposit of $10 is required of all day students taking the regular 
Chemistry and Dyeing Course. A deposit of $5 is required of students 
taking chemistry in connection with any other course. These deposits are 
to cover the cost of any breakage that may occur, but in case the actual 
breakage exceeds this amount an additional charge is made. Any unex- 
pended balance in excess of 25 cents is returned at the end of the year. 

To non-resident and foreign students taking chemistry a further charge 
of $10 for chemicals is made. 

A fee of $5 is charged each day student, to be used for assisting in the 
maintenance of athletics in the school and provides admission to all ath- 
letic activities. 

All fees are due at the beginning of each semester. 

Students are required to supply themselves with such books, tools and 
materials as are recommended by the school, and pay for any breakage or 
damage that they may cause in addition to the above-named fee. 

Evening Students. — No tuition fee is charged evening students who are 
residents of Massachusetts. For non-resident students the tuition fees are 
as follows: 

For courses, except those in the chemistry department: 
$6 per twelve week term, 2 evenings a week. 
$3 per twelve week term, 1 evening a week. 
For courses in the chemistry department: 

3 evenings a week for 12 week term: $11 for tuition and $1 for 

2 evenings a week for 12 week term: $7 for tuition and $1 for 

All students, whether resident or non-resident, who enroll in the chem- 
istry department courses, are required to make a deposit of $5 for break- 
age. In case the breakage caused by any student does not equal the a- 
mount of his deposit, the balance in excess of 25 cents is returned to him 
at the close of the school year, but if the breakage is in excess of this 
deposit, the student is charged the additional amount. Evening students 
are required to supply themselves with such books and materials as are 
recommended by the school, but this charge is small. 

Non-resident students and students from foreign countries, if attending 
the day classes, are charged no additional tuition fee if they desire to 
attend evening classes. 

Special Morning Classes. — For those whose working hours prevent 
them from attending the evening sessions a morning class in loom fixing 
and designing and cloth analysis is held. This class meets three morn- 
ings a week from 8:30 to 11:45 during the two terms of evening school. 
Students in this group receive more personal attention than is possible 
in the evening classes, and, if they satisfactorily complete the year's 
work, they receive credit for a three year evening course. A tuition fee 
of $5.00 for each term, payable in advance, is charged for this course. 


The school hours for the day classes are from 8.30 to 12 each morning 
except Saturdays, with afternoon sessions from 1.00 to 4.00 except Sat- 
urdays. For sessions of evening classes see page 30. 


Written examinations are held twice a year, and other tests from time 
to time to determine the standing of students in their work. 

The final examination is held at the end of the spring term. Results 
of these examinations, together with the student's marks recorded from 
recitations, practical demonstrations and students' books are taken into 
account in ranking students at the end of each year and for graduation. 
Unsatisfactory progress necessitates the student repeating his studies. 

Diplomas are given on the satisfactory completion of a course of study 
extending over a period of three years in connection with each course, if 
the student's record is otherwise satisfactory. 

Students taking special courses in most cases are entitled to a certifi- 
cate if they honorably and satisfactorily complete the course of instruc- 
tion scheduled. 

Day students are required to spend as much time daily out of school 
hours in study, such as recording lectures and other notes, as may be 
necessary to maintain proper standing. The students' books are exam- 
ined by the instructors periodically, and the care and accuracy with which 
they are kept is considered in ranking students. 


Students are required to conduct themselves in an orderly and gentle- 
manly manner while in attendance at the school. When the conduct of any 
student is considered by the Principal of the school detrimental to its 
best interests, he will be suspended by him and the case reported to the 
Board of Trustees for action. 

Any student who presents at any time work as his own which he has 
not performed, or tries to pass an examination by dishonorable means, 
shall be regarded as having committed a serious offence. 

Students shall exercise due care in the use of the school apparatus and 
machinery. All breakages and accidents must be reported at once to the 
instructor in charge and the student will be held liable for any wilful 
damage or the result of gross carelessness. 


Day students taking the regular courses are required to attend every 
exercise of the school; special students, every exercise called for by their 
schedules. For every case of absence or tardiness students must present 
an excuse to the Principal. A certain number of unsatisfactory excuses 
will render the student liable to suspension and further action if cause 
is sufficient. 

When the attendance of an evening student is unsatisfactory he will 
render himself liable to be dropped from the school. 


New Bedford is unusually desirable as a residential city, and students 
will find numerous houses of private families and boarding houses where 
they may obtain room and board. 

No requirements are made as to residence of out-of-town students, al- 
though facilities are given by having addresses of suitable houses on file 
at the school. 

No definite estimate can be made of the cost, as this depends entirely 
on the tastes of the student, but board and room may be obtained for 
from $10 per week upwards. 



Students are required to purchase such materials, textbooks, tools and 
apparatus as may be required from time to time by the school authorities, 
or make deposits on such as are loaned to them. The supplies required 
vary with the courses for which the students enter, the cost being from 
$20 to $50 per year. 


The school maintains a library that contains all the best works on card- 
ing and spinning, weaving, designing, knitting, dyeing and mechanics; 
also a consulting encyclopedia and an international dictionary. Catalogues 
and pamphlets dealing with machinery or processes related to textile 
work are also on tile, as are all the leading textile journals and trade 
papers. The students have access to the library during school hours and 
books may be loaned to students for a specified time. 


The school has an athletic association, and the students participate 
actively in various sports and games. The school is equipped with a gym- 
nasium, locker room and shower baths. There are several athletic fields 
open to the students for their outdoor sports. The management of the 
school will give all reasonable encouragement and support to the further- 
ance of healthful recreation and manly sports for its students. 

For fee for same see page 34 of this catalogue. 



The donation of William Firth, Esq., has established a sum of money at 
the New Bedford Textile School, primarily for the benefit of sons of 
members or of deceased members of the National Association of Cotton 
Manufacturers, furnishing to the recipients of such scholarships tuition 
fees as approved by the Board of Trustees of the school. Candidates for 
these scholarships must apply by letter only. The candidates must be at 
least sixteen years of age and furnish certificates of good moral character, 
and those who have been students of other technical institutions, colleges 
or other universities are required to furnish certificates of honorable dis- 
missal from such institutions. Every candidate must file an application 
at the school for admission, agreeing to observe the rules and regulations 
of the school. Candidates are eligible for any of the courses included in 
the curriculum of the school. 

In case the sons of members .or of deceased members of the National 
Association of Cotton Manufacturers do not apply for the scholarship, 
any person eligible for entrance to the school may make application. 

These scholarships will be available in the fall of 1938. 



The donation by the Passaic Cotton Mills Corporation and its employees 
of the sum of $3,000 has established scholarships at the New Bedford 
Textile School, primarily for the benefit of the employees of the Passaic 
Cotton Mills Corporation and in accordance with an indenture entered 
into between the above-named Passaic Cotton Mills Corporation and its 
employees and the Trustees of the New Bedford Textile School. 

In default of any application from an employee of the Passaic Cotton 
Mills Corporation who is deemed by the Trustees of the New Bedford 


Textile School as qualified to enter that institution, the Trustees of the 
New Bedford Textile School may, at their discretion, nominate, with the 
approval of the Passaic Cotton Mills Corporation, other persons to be the 
beneficiaries of this scholarship. Such applicants must comply with such 
reasonable regulations and conditions as said New Bedford Textile School 
may from time to time adopt in relation thereto. 

From said applicants students shall be selected by the Trustees of the 
New Bedford Textile School as beneficiaries of said scholarships. 

These scholarships will be available in the fall of 1938. 


The National Association of Cotton Manufacturers offers a medal to be 
awarded each year to the student in the graduating class who shows the 
greatest proficiency in scholarship. This is determined by an examination 
of the records of the students' progress throughout their studies, which 
are recorded and reported upon by the instructors and kept permanently 
on file. 

The competition for this medal is open to all day students who graduate 
in the Complete Cotton Manufacturing Course, or to evening students 
who have completed studies comprised in that course and graduated there- 
in. The association offering the medal has made it a condition of the 
award that at least four members of the graduating class be eligible to 
the competition. 


This medal is awarded to the member of the freshman class taking the 
General Cotton Manufacturing Course who ranks the highest in scholar- 
ship for the year. It is presented by the Alumni Association, to commem- 
orate the day of Mr. William E. Hatch's retirement from the presidency 
of the school. 


This medal is presented by Mr. Victor 0. B. Slater, a graduate of the 
evening classes of the school, in memory of his father, Peter Slater, who 
was a loyal friend of the school. It is awarded to the student graduating 
from the evening classes in Textile Design, who has attained the highest 
standing for the two-year course. 



This department occupies nearly the entire first floor of the machinery 
building, and has approximately 9,000 square feet of floor surface. The 
equipment is large and diversified, enabling the students to become ac- 
quainted with practically all the leading makes of machines found in the 
carding or spinning departments of cotton mills. 

A special feature of the equipment is the large number of models of the 
principal parts of the different machines in this department. These mod- 
els are so mounted that the different settings and adjustments can be made 
equally as well as on the machine itself, and thus enable the student to 
grasp more readily the essential points, since the parts are much more 
readily accessible. 

The department is humidified by the system of the American Moisten- 
ing Company, Bahnson humidifiers, the Parks-Cramer Company's Turbo 
System and the American Air Purifying Company's portable humidifiers, 
automatic control. 


Carver Cotton Gin Co. : 1 18 saw cotton gin. 

Saco-Lowell Shops: 1 roving waste machine; 1 automatic feeder; 1 
opener and breaker lapper; 1 finisher lapper; 1 card; 1 evener draw 
frame; 1 two-head draw frame; 1 fine roving frame; 2 spinning 
frames; 1 Perham & Davis evener motion complete with feed rolls 
and cones. 

H. & B. American Machine Co. : 1 finisher lapper ; 2 cards ; 1 drawing 
frame; 2 roving frames; 2 spinning frames; 1 section of arch with 
bend; 1 spinning builder motion; 1 roving builder motion; 2 differ- 

Mason Machine Works : 1 card, 1 railway head. 

John Hetherington & Sons, Ltd. : 1 card, 1 sliver lap machine ; 2 com- 
bers; 1 mule; 1 camless winder; 1 nipper model. 

Potter & Johnson: 1 card. 

Whitin Machine Works: 2 cards; 1 sliver lap machine; 1 ribbon lap 
machine; 4 combers; 1 drawing frame; 2 roving frames; 2 spinning 
frames; 1 model spinning builder. 

Woonsocket Machine & Press Co. : 1 card ; 2 drawing frames ; 2 roving 
frames; 1 differential; 1 roving builder motion; 1 gassing machine; 
1 combination bale breaker, Crighton opener and horizontal cleaner; 
1 section card arch with bend. 

Dobson & Barlow : 1 fine roving frame ; 1 roller and clearer card ; 1 

Asa Lees: 1 roving differential motion. 

Fales & Jenks Machine Co. : 3 spinning frames ; 1 twister. 

Draper Corporation: 2 twisters; 1 banding machine. 

Collins Brothers: 1 twister. 

Universal Winding Company: 1 No. 50 combination winder; 1 No. 90 
bobbin winder; 1 G. F. 60 winder. 

Foster Machine Co. : 2 doubling winders. 

Sonoco Products Co. : 1 roller covering outfit for cork rolls. 

Miscellaneous Equipment: Roller covering machinery; apparatus for 
comber re-needling; card clothing machine; ball and spool winding 

Testing Apparatus: 3 single thread testers; skein and cloth tester; 
conditioning and testing machine ; inspecting machine ; yarn and rov- 
ing reels; yarn balances; percentage scale; micro-photographic ma- 
chine; twist counters; thread splicers; electric oven recording ther- 
mometer, recording hygrothermograph and rotostat; 1 fibre tester; 

1 Aldrich regain indicator. 


This department occupies all of the second floor of the machinery build- 
ing and contains about 15,000 square feet of floor area. The equipment is 
very complete and includes sufficient machinery to enable each student 
to obtain all the practical experience required in connection with his 
studies. All of the latest machinery is represented in this equipment, 
and, as the machinery is made especially for use in the school, it fully 
meets the needs of the students. Besides the machinery listed below there 
are models for demonstrating leno motions, box motions, warp-stop mo- 
tions, etc. 

Draper Corporation : 4 automatic looms, plain, 2-harness ; 1 automatic 
5-harness cam loom; 1 automatic 20-harness dobby loom; 1 spooler; 

2 warpers. 

Crompton & Knowles Loom Works : 5 plain 3-harness, 4 plain 4-harness, 
5 plain 5-harness looms; 16x1 gingham loom; 12x1 automatic 
bobbin changing gingham loom; 14x1 gingham loom; 13x1 12- 


harness towel loom; 14x1 20-harness No. 13 multiplier loom; 1 20- 
harness double cylinder loom; 2 20- harness dobby looms; 2 2-bar 
lappet looms; 3 25-harness 2x1 box and leno motion looms; 8 16- 
harness 2x1 box and leno motion looms; 3 25-harness leno motion 
looms; 10 20-harness leno motion looms; 1 double-lift Jacquard, 600 
hook loom; 1 double-lift Jacquard, 208 hook loom; 1 double-lift Jac- 
quard, 300 hook loom; 1 double-lift Jacquard, 400 hook loom; 2 4x1 
20-harness leno motion looms; 2 4x1 20-harness dobby, double cyl- 
inder automatic bobbin changing looms; 2 4x4 20-harness dobby 
looms; 2 25-harness Cotton King 4x1 Automatic and leno motion 

Whitin Machine Works: 2 plain, 3-harness looms; 2 plain, 4-harness 

looms; 9 plain, 5-harness looms; 1 25-harness 2x1 box motion loom; 
1 25-harness 2x1 box motion and leno motion loom; 3 25-harness 
leno motion looms. 

Stafford Co.: 1 20-harness automatic shuttle changing loom; 1 plain 
automatic shuttle changing loom; 1 silk or rayon automatic shuttle 
changing loom, changeable from plain to 3 or 4-harness twill; 1 20- 
harness automatic bobbin changing loom. 

Hopedale Mfg. Co. : 1 Nordray plain, 2-harness, automatic loom. 

Easton & Burnham Machine Co. : 1 spooler. 

T. C. Entwistle Co. : 1 warper ; 1 ball warper ; 1 beamer. 

Howard & Bullough Machine Co. : 1 slasher. 

Warp Compressing Machine Co. : 1 600-end rayon creel and dresser. 

22 drawing-in frames. 


The design classroom is located on the third floor of the recitation build- 
ing, and is a large, well-lighted room containing all the appliances neces- 
sary for instruction in this important subject. Special attention has been 
given to the method of lighting this room to give the best results, and the 
desks are made with special reference to the needs of the student of 

The hand loom work is located in a large room on the third floor of the 
machinery building. This room contains twenty-seven hand looms adapted 
to the use of students in experimental work, and in putting into practice 
the theory of designing, and also to enable them to produce certain of the 
designs that they are taught in the designing class. There is also a 20 
spindle bobbin winder and one hand winder. The room is well lighted by 
a saw tooth roof. 

The card cutting room contains two Royle card cutting machines and 
three card lacing frames, thus enabling the students working Jacquard 
designs to cut their own cards. 


Instruction in the mechanical department is carried on in five different 
rooms located in various parts of the recitation building. These rooms 
are arranged and fitted out with apparatus to meet the needs of the 
students following this course. The department is subdivided into the 
following sections : mechanical drawing, textile engineering and machine- 
shop work. 

Mechanical Drawing. — The drafting room is located on the second floor 
of the recitation building and is well lighted by northern and western 
exposures. It is equipped with independent drawing tables and lockers 
for the drawing boards and materials. For the students' use in connection 


with their drafting instruction there is a collection of models, mechanical 
apparatus and machine parts. On the third floor there is a swinging blue- 
print frame mounted on a track, and a large dark room fitted with a Wag- 
enhorst Electric Blue Printer and modern conveniences for blueprinting. 

Steam Engineering and Elementary Electricity. — Instruction in steam 
engineering and elementary electricity is given both in theory and prac- 
tice. The theoretical part of the course is carried on in a large recitation 
room on the second floor, while the practical side is studied in the engin- 
eering laboratory in the basement of the recitation building. The labora- 
tory is supplied with steam direct from the boiler room and also has gas 
and water connections. 1 12" x 24" Wetherell Corliss Engine; one 5- 
horsepower Sturtevant Vertical Steam Engine, and models of boilers, 
engines and pumps. 

For the study of electricity there is provided a source of alternating 
current at 110 volts and 220 volts pressure. 

1 2KW Holtzer-Cabot direct-current Generator ; 1 5-horsepower Holtzer- 
Cabot Induction Motor; 1 2%KW Holtzer-Cabot compound wound Con- 
verter ; an assortment of voltmeters, ammeters, wattmeters, galvanometer, 
foot candle meter, transformers, etc. 

Machine Shop. — This department occupies about 2,800 square feet of 
floor surface on the first floor of the recitation building. The machinery is 
electrically driven and the equipment modern. 

7 12" x 5 ft. Reed Prentice Engine lathes; 3 12" x 6 ft. Reed Prentice 
engine lathes; 1 18" x 8 ft. Reed Prentice engine lathe; 1 14" x 6 ft. Reed 
Prentice quick change gear engine lathe ; 1 14" x 6 ft. Whitcomb-Blaisdell 
quick change gear engine lathe; 1 14" x 6 ft. Hendey quick change gear 
engine lathe ; 2 14" x 6 ft. Flather engine lathes ; 1 7" x 5 ft. Reed Pren- 
tice speed lathe; 1 10" x 5 ft. speed lathe; 1 20" Prentice drill; 2 Bench 
drills; 1 No. 4 Reed "Barr" single sensitive spindle drill; 1 No. iy 2 Brown 
& Sharpe universal milling machine; 1 No. 2 Brown & Sharpe universal 
milling machine; 1 16" Potter & Johnson universal shaper; 2 16" Ohio 
shapers ; 1 24" x 6 ft. Woodward & Powell planer ; 1 Morse plain grinder ; 
1 Greenfield universal grinder, complete; 1 2%" x 20" Diamond water 
tool grinder; 1 2" x 12" Builders bench grinder; 1 4" x 28" Douglas grind- 
stone; 1 Millers Falls power hack saw; 1 Peerless electric tool post 
grinder; 1 Cincinnati electric hand drill; 1 Westmacott gas forge; 1 
Wallace circular saw; 1 4" Wallace planer; 1 Cabinet containing milling 
machine attachments ; small tools and minor apparatus ; 1 Browne & 
Sharpe No. 2 wire feed screw machine; 1 Oxweld welding equipment; 
1 Black & Decker electric drill. 


This department occupies about 13,600 square feet, situated in the base- 
ment and on the first and third floors of the recitation building. This 
space is divided into four laboratories, a lecture and recitation room, a 
reading room and office for the Principal of the department, and two store- 
rooms. The general chemistry and dyeing laboratory is a large, well- 
lighted room, 63 feet 6 inches by 20 feet, on the first floor, and is especially 
designed to meet the needs of the students in the general courses. This 
laboratory is equipped with forty-two double desks in rows of three desks 
each. At the end of each row is situated the sink and dye bath. Along the 
wall, on the opposite side are the hoods. In the main special laboratory, 
each student has desk space, 2 feet by 8 feet, and his own desk, dye bath 
and draught hood. Conveniently located are a large drying oven, four 10- 
gallon dye kettles, and one 20-gallon dye kettle. This laboratory is equip- 
ped at each desk with gas, water and suction in order that the student's 
work may be carried on with the utmost celerity conductive to the best 





I— I 


results. This laboratory is also equipped for analytical work and has 10 
balances, a polariscope, 1 Spencer microscope No. 5, triple nose piece, 
objectives 16, 4, and 1.8 oil immersion, mechanical stage; 1 Spencer ro- 
tary microtome, 2 other microscopes, an Emerson calorimeter, a Westphal 
balance, a Saybolt universal viscosimeter, and other special apparatus. 
The laboratory for converting cotton textiles is located in the basement. 
It contains the machines necessary to demonstrate in practical proportions 
the operations involved, such as a single-burner Butterworth gas singer 
complete with air pump and spark extinguisher, a 100 lb. Jefferson kier, 
an experimental piece mercerizing machine, a 3 roll padding machine, a 
6 cylinder horizontal drying machine, equipped with the Files exhausting 
system, 2 40" jigs, a steam heated calender, and a 30 foot automatic 
tentering machine with Butterworth patent automatic clips. In this lab- 
oratory there is also a small Hussong dyeing machine and a Franklin dye- 
ing machine for yarn dyeing. On the Hussong machine there is a Taglia- 
bue temperature controller. A high top cloth folder and a Dinsmore 
portable sewing machine are part of the equipment although situated in 
another room. There is also one laboratory printing machine from the 
Textile-Finishing Machinery Company and one fade-ometer. 


The knitting department occupies two large connecting rooms on the 
top floor of the machinery building, and contains about 6,600 square feet 
of floor area. The equipment is very complete, there being a greater 
number of machines and a larger variety than can be found in any similar 
school in the world. The work that has been produced by the students of 
this department has received high praise from some of the leading experts 
in the knitting trade, the hosiery and underwear taking especially high 

Crane Mfg. Co.: 1 36-gauge spring needle table, 18" and 21" cylinders; 
1 15" 8 cut rib body machine; 1 19" 14 cut rib body machine with 
Crawford stop motion. 

Hemphill Co.: 1 "Banner" 3^" 176 needle automatic footer; 1 "Banner" 
3y 2 " 220 needle automatic footer; 1 "Banner" 3V 2 " 240 needle auto- 
matic striper; 1 "Banner" 3%" 240 needle split footer. 

Jenckes Knitting Machine Co. : 1 "Invincible" 4" 108 needle automatic 
footer; 1 "Invincible" 3^" 188 needle automatic footer; 1 "Invinc- 
ible" 3" 120 needle automatic footer; 1 "Invincible" %y A " 240 needle 
automatic footer; 1 "Invincible" Sy 176 needle automatic footer; 
1 "Invincible" 3^/J" 160 needle automatic footer. 

Fidelity Machine Co.: 1 3 1 / 2 ,/ 220 needle automatic ribber; 1 3V 2 " 240 
needle automatic ribber; 1 3" 180 needle automatic ribber. 

H. Brinton Company: 1 33/J" 108 and 188 needle automatic ribber; 1 4" 
84 and 160 needle automatic ribber; 1 3V 2 " 240 needle automatic rib- 
ber; 1 6" 480 needle ribber; 1 4y 2 " 90 needle scarf machine. 

Lamb Knitting Machine Co.: 1 6-cut scarf machine; 1 flat 8-cut glove 

Mayo Machine Co.: 1 y A " 176 needle automatic footer; 1 3V 2 " 188 

needle automatic footer; 1 3V 2 " 200 needle automatic footer; 1 3V 2 " 
220 needle automatic footer. 

Scott & Williams: 1 3^" 176 and 200 needle automatic ribber; 1 3%" 
176 and 180 needle automatic ribber; 1 4 1 / 4" 180 needle automatic 
ribber; 1 4*4" 216 needle automatic ribber; 1 4 1 / 4" 276 needle auto- 
matic ribber; 1 4 1 / 4" 300 needle automatic ribber; 1 S 1 /^" 160 needle 
automatic sleever; 1 3%" 264 needle automatic ribber; 1 10" 8 and 
10 cut automatic rib-body machine; 1 13" 10 cut automatic rib-body 
machine; 1 20" 12-cut plain and 2-2 body machine; 1 18" 26-cut Bal- 


briggan body machine; 1 20" 16-cut Balbriggan body machine; 1 20" 
14-cut rib-cuff machine; 1 3%" 240 needle Model K machine; 1 3y 2 " 
200 needle Model HH machine; 1 3%" 160 needle Model RI machine; 
1 3^" 140 needle Model RI machine; 1 finishing machine; 1 bar- 
stitch machine; 1 chain machine; 1 12-point looper ;1 3%" 280 needle 
Model K machine; 1 220 needle Model HH Spiral float machine. 

Wildman Mfg. Co.: 1 3%" 200 needle fancy pattern automatic ribber; 
1 2%" 120 needle necktie machine; 1 3%" 188 and 200 needle auto- 
matic ribber; 1 3y 2 " 220 and 240 needle automatic ribber; 1 4%" 180 
needle automatic sleever; 1 4y 2 " 216 needle automatic ribber; 1 4 1 / 4" 
272 needle automatic ribber; 1 13" 8 and 12-cut automatic rib-body 
machine; 1 18" 14-cut plain and 2-2 rib-body machine; 1 Ballard 
electric cloth cutter. 

Merrow Machine Co.: 1 60D overseaming machine; 1 60S hemming 
machine; 1 60AD overedging machine; 1 60UD cloc-stitch machine; 
1 35 FJ schell machine; 1 60Q schell machine; 1 60JDC overseaming 

Metropolitan Sewing Machine Co.: 1 150 CD lace neck machine; 1 50 
CH-10 taper collarette machine; 1 30TC seaming machine; 1 251 
cover-seaming machine; 1 192 BX facing machine; 1 28GC-1 stay 
machine; 1 192 W-5 elastic machine. 

Singer Sewing Machine Co. : 1 44 lock stitch machine ; 1 24 chain stitch 
machine; 1 24-8 drawer finishing machine; 1 32-29 eyelet machine; 
1 68-7 button sewing machine; 1 79-6 buttonhole machine; 1 79-1 
tacking machine. 

Standard Sewing Machine Co.: 1 buttonhole machine. 

Union Special Sewing Machine Co. : 1 class 3,000 lace machine ; 1 class 
5,800 collarette machine; 1 class 16,100 facing machine; 1 class 6,000 
chain stitch machine ; 1 class 2,300 chain stitch machine with Dewee's 
trimmer; 1 class 11,900 12 gauge cover seaming machine; 1 class 
11,900 16-gauge cover seaming machine; 1 class 15,400 seaming ma- 
chine; 1 grinder. 

Wilcox & Gibbs Sewing Machine Co. : 1 lock-stitch machine ; 1 flatlock 
machine; 3 over-lock machines; 1 f eld-lock machine. 

Stafford & Holt: 1 14" 6-cut sweater machine. 

Tompkins Bros. Co. : 1 spring needle table, 22 gauge 20" and 36 gauge 

United Shoe Machinery Co. : 1 metal eyelet machine. 

The Beattie Mfg. Co. : 1 16-point looper ; 1 22-point looper. 

Grosser Knitting Machine Co. : 1 Koehler 20-point looper ; 1 Koehler 
24-point looper. 

Southern Textile Machinery Co. : 1 Wright steady dial 22-point looper ; 
1 Wright steady dial 28-point looper. 

John W. Hepworth & Co. : 1 16-point C. R. D. looper. 

Saco-Lowell Shops: 1 24-end camless winder. 

W. D. Huse & Sons : 2 bottle bobbin winders. 

George W. Payne & Co. : 1 bottle bobbin winder. 

Universal Winding Co.: 1 No. 50 cone winder; 1 No. 90 bobbin winder; 
1 No. 60 cone winder. 

Henry H. Skevington & Co. : 1 floating thread cutter. 

Excelsior Cloth Dryer: 1 Excelsior cloth dryer. 

Philadelphia Drying Machine Co.: 1 Hurricane steam press; 1 Hurri- 
cane hosiery and underwear dryer; 1 Electric hosiery dryer. 

Lewis Jones: 1 hosiery and underwear brushing machine. 

Paramount Hosiery Form Drying Co. : 1 set metal hosiery forms, men's, 
Ladies' and children's. 

Joseph T. Pearson: 120 hosiery boards, men's, ladies' and children's. 


Stampagraph Co. : Dry transfers for hosiery. 

Harding Brook Co. : 1 Acme Hosiery Binder. 

Oswald Lever Co. : 1 18 end bobbin winder ; 1 20 spindle quill winder. 

Atwood Machine Co. : 1 16 end bobbin winder ; 1 silk warper with creel. 

Kumagraph Co. : Dry transfers for hosiery. 

Allentown Bobbin Works: 500 silk bobbins. 

Rayon Equipment: 1 soaking and extracting machine; 1 rayon spinner 
(twister) . 

Microscopy Laboratory Equipment : Bausch & Lomb Optical Co. : 2 tex- 
tile microscopes; 1 camera lucida; 1 Filar micrometer; 1 complete 
photomicro-graphic camera; 1 counting and 1 micrometer disc. 

Spencer Lens Co. : 1 binocular wide field microscope. 

6 work boxes; 9 lamps and apparatus for cross sectioning. 

Testing Apparatus: 3 twist testers; 1 Casartelli balance; 2 chemical 
balances; 1 set of stapling machines; 1 yarn reel; 1 cotton and 1 
rayon yarn quadrant; 1 tensometer. 


For some years the school manufactured its power and light, but owing 
to the growth of the school plant it became necessary either to make a 
large expenditure for a new power plant or to purchase power and light, 
and the latter plan was determined upon. 

The equipment in this department consists of 1 Stirling 105 H.P. water 
tubular boiler; 1 B. & W. 155 H.P. water tubular boiler; 1 Warren h 1 /^" 
x 3V2" x 5" Boiler Feed Pump connected to a receiver tank; 1 Worthing- 
ton 5 1 / 4" x 3%" x 5" single steam pump; 1 Riley 100 H.P. feed water 
heater; 1 Atwood and Morrill damper regulator; 1 Sturtevant 75 H.P. 
horizontal center crank engine ; 1 Westinghouse 50 K.W., 220 volt, 3 phase, 
alternating current generator, direct connected; 1 Westinghouse 4 K.W., 
125 volt, direct current generator; 1 General Electric recording watt- 
meter; 1 W. S. Hill 4 panel switchboard equipped with 9 Wagner indicat- 
ing ammeters, 2 Wagner indicating voltmeters, 1 Thomson 50 K.W. 3 
phase integrating wattmeter, 2 direct reading K.W. meters, 14 Wagner 
current transformers, 1 Westinghouse combination rheostat, 1 General 
Electric combination rheostat, 2 Condit Electrical Manufacturing Com- 
pany's 250 volt circuit breakers, all necessary switches, bus bars, etc. ; 
2 wing turbine fans for forced draft; 1 Cochrane oil separator; 1 Sturte- 
vant heating and ventilating outfit ; 1 American Moistening Co.'s humidi- 
fying outfit; also 1 Parks-Cramer Company's, 1 Bahnson Company's and 
1 American Portable humidifying outfit; and 43 electric motors ranging 
from % H.P. to 15 H.P. 


March (The Steel King) St. Clair 

N. Y. A. Orchestra 
Clarence E. Jones, Director 


Rev. William B. Mathews 

Opening Address 

John A. Shea 
President of the Board of Trustees 


Hon. Leo E. J. Carney, Mayor 

I To Vacation (Salt Water) K. L. Smith 

N. Y. A. Orchestra 



Thomas H. Buckley 

Auditor of the Commonwealth 

Presentation of The National Association of Cotton Manufacturers' Medal 

Allan Barrows 
Member of the National Association of Cotton Manufacturers 

Presentation of The William E. Hatch Medal 

Louis A. Cordeiro, Trustee 

Presentation of The Peter H. Slater Medal 

William E. G. Batty, Trustee 

Presentation of Diplomas and Certificates to Graduates 

of Day and Evening Classes 

Manuel Silva, Trustee 

Presentation of Class Picture 

Harold F. Riley 
President of the Class of 1937 


George Walker 
Principal of the School 

Exit March (The Master Craftsman) Clarence E. Jones 

N. Y. A. Orchestra 


Day Classes — -Diploma Courses 

General Cotton Manufacturing 
Cameron Arthur Baker Edward Albert Kosiba 

Elmer William Diggle Paul Masaryk Kovar 

Mark Wesley Knowlton, Jr. Harold Edward McCormick 

Stanley Andrew Koczera Benjamin Slom 

Earle Wendell Smith 

Chemistry, Dyeing and Finishing 

Russell Henry Armitage Walter Ricketson Mitchell, Jr. 

Joseph Aulisio Alan James Ramsbotham 

Kenneth Victor Chace Charles Leo Riley, Jr. 

Thomas Joseph Dwyer, Jr. Harold Francis Riley 

Allen Lewis Frost Gordon Janssen Simmons 

Edgar Adolph Gundersen Norman Singleton 

Milton Morris Horvitz Elbert Tripp 

Leo Paul Kenny Harry Wilcock 

Edmund James Levine Harold Hunt Williams 

Day Classes — Certificate Courses 

Henry J. Bobrowiecki Mechanical Two Years 

Gunnar F. Erickson Mechanical Two Years 

Raymond E. Fischer Mechanical Two Years 

Edwin V. George Mechanical Two Years 

Meyer N. Goldberg Mechanical Two Years 

John V. Hillman Mechanical Two Years 

Antone Mello, Jr. Mechanical Two Years 

Ferdinand Panek Mechanical Two Years 

Ernest J. Remillard Mechanical Two Years 

Madeline C. Robinson Textile Secretarial Two Years 

Walter Schofield Mechanical Two Years 

Day Classes — Post Graduate Certificate Courses 

Norman B. Gobeil 
George B. Krumholz, Jr. 

Microscopy and Testing 
Microscopy and Testing 

One Year 
One Year 

Evening Classes — Diploma Courses 

Carding and Spinning 
Gil Souza 

Evening Classes — Certificate Courses 

Eight Years 

Raymond D. Illingworth 
Manuel Correia 

John J. Braithwaite 
Amedee Goulet 

J. A. Eddie Bourque 
Ernest Cote 
Alfred Durocher 
John C. Glowacki 

Antone Almeida 
James Ashworth 
Frank J. Ataman 
Winselau P. Barros 
Joseph H. Bergeron 
Camille Bernier 
Conrad Blanchard 
Albert S. Broadland 
Joseph N. Camara 
Thomas Carter 
John Catlow 

John Antunes 
Raymond H. Bauer 
Arthur Bergeron 
Theophane Bergeron 
Onesphore Blanchard 
Moise Bourassa 
Omer Breault 
Adolf Budra 
Joaquim Cabral 
Edmund F. Correia 
Joseph Correia, Jr. 
Armand Cote 
William Crane 
James Crowell 
Joseph A. Czajka 
Dennis Dauteuil 

Seven Years 
Adelard Emond 

Six Years 
Albert J. Hawkes 
Robert C. Lambalot 

Five Years 
Ernest Lamb, Jr 
James M. Leadbetter 
Daniel Mendonca 
Harold J. O'Brien 

Four Years 
Herbert Cockshoot 
Rosario Constant 
Lionel Cusson 
iVilliam T. Des Ruisseau 
Walter J. Gruszczynski 
Thomas Hindle 
Frank Jason 
John Kaczorowski 
Ernest N. Lee 
John G. Leva 
Walter E. F. Mansfield 

Three Years 
John H. Dearden 
Albert Desrosiers 
Joaquim Faria 
Hannibal M. Fraga 
Bruno Gadomski 
James Gardner 
Anthony Gianetto 
Gerard L. Gonnevilie 
Harold E. Hawes 
Warren Kubacki 
Albert Laflamme 
Louis F. X. Lague 
Thomas J. Lewis 
John S. Lubera 
Mary MacFarland 
Eugene Magnant 
Andrew J. Mignerey 

Alexander Zukowski 
Louis F. Rossi 
Mitchell Tomkowicz 

Elie Ogier 
Virginio Simas 
Joseph Walmsley 
Joseph T. Zych 

Frank J. Mikus 
Philemon Munroe 
Justin B. Poole 
William H. Potter 
Mieczyslaw Sojka 
Dennis C. Tavares 
Herbert Thompson 
Henri G. Turcotte 
Dommgos Vera 
Alphonse Vercammen 
Victor Zolnierz 

Rodney 0. Morse 
Wilfred Ostiguy 
Lucien Ouimet 
Alexander Patykula 
Roland A. Perrin 
Lester C. Pierce 
Omer E. Pigeon 
Valmore Poirier 
Stanley Praisnar 
Normand P. Richard 
Frank N. Rushworth 
Walter T. Sawicki 
Joseph Souza 
Joseph Towers, Jr. 
John Whelan 
Stanislaw Zalenski 


Joseph Agostino 
Joseph J. Amaral 
Siegfried Antosch 
George Avila 
Romeo Barabe 
Joseph J. Baron 
Alexander Barrows 
Joseph Bettencourt 
Albert F. Bochman 
Charles Boehler 
George Bottomley 
Arthur L. Bourassa 
Joseph E. O. Breault 
Francis L. Burns, Jr. 
Charles A. Cabral 
Henry Cabral 
Arnold W. Carlson 
Edward P. Carvalho 
Camille Charbonneau 
Albert Charpentier 
Alvin D. Clark 
Austin V. Cocker 
Robert W. Cook 
Charles Cosmos 
Aime H. Cote 
Hans A. Darwin 
Henry R. Davenport 
James L. Dean 
Charles J. Donnelly 
Gerald C. Fletcher 
Annette L. Gagnon 
Philip A. Gallant 
Ralph Gaudreau 

Two Years 
Albert Genereaux 
Edmund B. Gifford 
William Glpsl 
Ivan C. Gregson 
Lawrence Hamer 
Ernest A. Hegele 
Harold K. Herlihy 
Benjamin Higginson 
George W. Holden 
James E. Holt 
Emile J. B. Houbre 
Philippe Huot 
Isabelle Izyk 
Alfred R. Kasmire 
William Kenyon 
Eugene Kiluk 
Joanna Kocur 
Wilfred Lague 
Francis Lamb 
Armand E. Lambalot 
Alfred J. Leclair 
Henry W. Leclair 
Thomas Lister 
Helen A. Maloney 
Julia Maloney 
William Marchessault 
William Marshall 
Henry Martineau 
Henry Mastey 
Alvin Medeiros 
Raymond A. Medeiros 
Aristides A. Medeiros 
Manuel Mello, Jr. 
Cezar Mendes 

Joseph R. Michaud 
Eugene G. Mondou 
Albert L. Muggleton 
Aime Neron 
Chester Norwood 
Albert J. Parent 
Euclide Pelletiers 
Joseph Percival 
George Peters 
Albert W. Pflug 
Irene Piatkiewicz 
Clifford Preston 
Emile E. Racine 
Manuel Rapoza 
Willis W. Rayno 
Antone Rodriques 
Howard B. Rossiter 
Normand Roy 
Stanley Rymszewicz 
Bernard S. Sandwell 
Eugene Sawicki 
Gordon R. Sherman 
Antonio Simas 
Manuel Soares 
Walter Sojka 
Alvin Souza 
James Spencer 
Wallace Sylvia 
Nagepy M. Thomas 
Russell S. Tripp 
Boleslaw E. Turbak 
Francis W. Warrington 
Matthew J. Wayner 


The following list has been corrected in accordance with information 
received previous to March 1, 1938. Any information regarding incor- 
rect or missing addresses is earnestly solicited. 

D indicates a diploma; C indicates a certificate (covering a partial 
course only) ; S indicates special course. 

Achorn, Robert E., Jr., I, '15 (D). Designer, Wauregan Co., Wauregan, 

Adamowicz, Charles S., '30 (C). New Bedford, Mass. 
Adams, Andrew C, I, '36 (D). Detail Draftsman, Draper Corp., Hopedale, 

Adams, Elbert V., I, '22 (D). In Auto Tire Dept., Montgomery, Ward & Co., 

Chicago, 111. 
Adams, James H., I, '29 (D). Machinery Salesman, New Bedford, Mass. 
Adelsohn, Arthur A., Ill, '28 (D). Monarch Wash Suit Co., New Bedford, 

Agrella, Charles J., II, '30 (D). With Dutchess Bleachery, Wappinger's 

Falls, New York. 
Akin, Francis T., HI, '32 (D). New Bedford, Mass. 
Albakri, Mathew S., I, '25 (C). Foreman of Dye House, Societe Syrienne, 

Amin Dial & Co., Damascus, Syria. 
Allan, William W., I, '15 (D). Superintendent, Baltic Mills Co., Baltic, 

Allen, Anne, III, '35 (D). Bookkeeper, John W. Allen Co., So. Dartmouth, 

Allen, Glawyer G., I, '25 (C). With Graniteville Mfg. Co., Graniteville, S. C. 
Allen, John T., Ill, '30 (D). With Farr Alpaca Co., Holyoke, Mass. 
Allen, Stanley I., Ill, '30 (D). With Grasselli Chemical Co., Grasselli, N. J. 
Amaral, Roy, I, '33 (D). With Nonquitt Mills, New Bedford, Mass. 
Amarantes, Jerry O., VI, '19 (C). Clerk, Amarantes' Garage, New Bedford, 


Ambler, Harry, HI, '17 (D). 

Amona, Cheng Q., I. '17 (D). Professor of Electrical Engineering, Canton 

Technical College, Canton, China. 
Anderson, Elliot F., S, '32 (C). With North American Rayon Corp., Eliza- 

bethton, Tenn. 
Anderson, Hilmer H., S, '22 (C). Superintendent, Brookdale Mills, Franklin, 

Armitage, Russell H., Ill, '37 (D). With U. S. Testing Co., New York, N. Y. 
Armitage, Stanley W., I, '25 (D). Superintendent, Meritas Mills, McComb, 

Ashley, Milton I., HI, '34 (D). With Glenlyon Print Works, Phillipsdale, 

R. I. 
Aulisio, David M., I, '36 (D). New Bedford, Mass. 
Aulisio, Joseph, III, '37 (D). Post Graduate Work, New Bedford Textile 

School, New Bedford, Mass. 
Austin, Harold S., VI, '24 (C). Asst. Routing Board Manager, Lewis Mfg. 

Co., Walpole, Mass. 
Axtell, G. Moody, HI, '34 (D). Chemist, Revere Copper & Brass Co., New 

Bedford, Mass. 

Babcock, Howard L., VI, '21 (C). With Durr Packing Company, Utica, N. Y. 

Baker, Cameron A., I, '37 (D). New Bedford, Mass. 

Baldwin, Fred L., S, '05 (C). 

Balloch, Roger T., IV, '21 (D). Textile Reporter, New Bedford, Mass. 

Banks, Winthrop E., Ill, '35 (D). Taunton, Mass. 


Barber, Ernest L., S, '31 (C). Steam Fireman, New Bedford Textile School, 
New Bedford, Mass. 

Barrett, Edward W., I, '21 (C). 

Barron, George L., S., '35 (C). Sales Mgr., John J. Gobell, New Bedford, 

Barrows, John T. Ill, '23 (C). Dentist, 96 Thompson St., New Bedford, 

Barrows, Murray F., S, '05 (C). Treasurer, Bristol County Mortgage Co., 

New Bedford, Mass. 
Barry, Richard O., Ill, '36 (D). With Apponaug Co., Apponaug, R. I. 
Bartlett, William, S, '30 (C). Newport Torpedo Station, Newport, R. I. 
Bates, Howard S., IX, '33 (C). With Morse Twist Drill & Machine Co., 

New Bedford, Mass. 
Bates, Merton H., II, '20 (D). Painter, Osterville, Mass. 
Bearcovitch, Alfred J., I, '15 (D). Dyer, Mansfield Bleachery, Mansfield, 

Beaumont, William I, '25 (D). Superintendent, Aiken Mill, Bath, S. C. 
Beauvais, Raymond F., II, '34 (D). 
Beck, Clifford N., I, '36 (D). Asst. Lab. Technician, Dunlop Tire Co., 

Utica, N. Y. 
Beetham, William, Jr., S, '32 (C). 6 Belgrave Ave., Penwortham, Preston, 

Lancashire, England. 
Begin, Edward E., I, '36 (D). New Bedford, Mass. 
Bentley, Milton J., I, '11 (D). With Whitin Machine Works, Whitinsville, 

Bergeron, William, S, '33 (C). Acushnet, Mass. 
Berkman, Philip, III, '32 (D). People's Market, New Bedford, Mass. 
Besse, Allen D., I, '22 (D). Assistant Designer, Wamsutta Mills, New Bed- 
ford, Mass. 
Besse, Edward L., Jr., I, '22 (D). Overseer, Worcester Tire Fabric Co., 

Worcester, Mass. 
Bessette, Leo A., I, '15 (D). Captain of Infantry, U. S. A. Army, Fort 

Meade, Md. 
Bisbee, Robert T., I, '26 (C). Designing Dept., Beacon Mfg. Company, 

Swannanoa, N. C. 
Bister, Frederick J., I, '09 (D). With John Bister, Cotton Umbrella Cloth, 

920 Broadway, New York City, N. Y. 
Biswas, Khitish C, I, '28 (D). India. 
Bjorngren, Victor J., S, '29 (C). With Hathaway Machinery Co., Fairhaven, 

Blair, William G., Jr., I, '08 (D). 
Blake, John J., I, '15 (D). 

Blake, Wendell C, I, '25 (D). With Pepperell Mfg. Co., Fall River, Mass. 
Blauvelt, John J., I, '22 (D). Assistant Superintendent, Belmont Silk Co., 

Kingston, Pa. 
Blossom, Carlton S., I, '16 (D). New York, N. Y. 
Blossom, James W., I, '17 (D). With Blossom & Brown, New Bedford, 

Boardman, Ellen G., VII, '26 (C). Mrs. John T. Lund. Swansea, Mass. 
Bobrowiecki, Henry J., IX '37 (C). New Bedford, Mass. 
Boehler, Charles, IX, '34 (C). With Continental Wood Screw Co., New Bed- 
ford, Mass. 
Bonnar, Thomas M., Ill, '36 (C). Student, Bentley School of Accounting, 

Boston, Mass. 
Boomer, Thomas M., Jr., I, '27 (D). Factory in Hulmeville, Pa. 
Booth, William, VI, 08 (D). 

Borden, Eliot F., Ill, '28 (D). Chemist, New Bedford Rayon Co., New 
Bedford, Mass. 


Bosse, Lillian B., S, '34 (C). With Pairpoint Corp., New Bedford, Mass. 

Bottomley, Fred, S, '23 (C). New Bedford, Mass. 

Boutin, Leon A., IX, '28 (C). Machinist, South Middleboro, Mass. 

Boyd, W. MacPherson, I, '22 (D). Superintendent, Canadian Cottons, Ltd., 
Hamilton, Ontario, Canada. 

Brand, Warren E., Ill, '34 (D). With the Gardiner Hall, Jr. Co., So. Well- 
ington, Conn. 

Braun, Leon A., I, '23 (D). Salesman, The Drug Products Co., Long Island, 
N. Y. 

Brend, Albert, II, '15 (C). 

Brindley, Harold J., S, '36 (C). With Lonsdale Co., Lonsdale, R. I. 

Broadmeadow, John C, III, '32 (D). With National Aniline & Chemical Co., 
Buffalo, N. Y. 

Brody, Louis, II, '33 (D). With Star Furniture Co., New Bedford, Mass. 

Brookes, Clifford, II, '29 (D). Designer, Page Mfg. Company, New Bed- 
ford, Mass. 

Brooks, Ruby E., II, '22 (C). Mrs. Bradford A. Luce, Jersey City, N. J. 

Brotherson, Curtis S., I, '28 (D). Jr. Technician, Better Fabrics Testing 
Bureau, Inc., New York, N. Y. 

Brown, James P., VI, '11 (C). Secretary, Glencairn Manufacturing Co., 
Pawtucket, R. I. 

Brown, Walter A., I, '17 (C). Overseer of Spinning, S. Slater & Sons, Inc., 
Webster, Mass. 

Brownell, Ulysses G., Jr., I, '21 (D). New Bedford, Mass. 

Bruce, William, I, '27 (D). Efficiency Man, Bigelow Carpet Co., Thompson- 
ville, Conn. 

Bruneau, V. Herbert, I, '23 (D). Manager, Canadian Cottons, Ltd., St. 
Croix Mill, Milltown, New Brunswick, Canada. 

Brunelle, Laurier O., I, '19 (D). New Bedford. Mass. 

Brunette, Romeo, VI, '23 (C). Tester, The Fiske Rubber Co., Ninigret 
Division, New Bedford, Mass. 

Buckley, Charles E., II, '01 (D). With Warwick Mills, Warwick, R. I. 

Burt, Raymond A., Ill, '14 (D). Mushroom Culture, Easthampton, Mass. 

Burt, Stuart W., IV, '26 (C). New Bedford, Mass. 

Cairns, James J., S, '19 (C). Designer, Hood Rubber Co., Watertown, Mass. 
Campbell, Malcolm E., I, '22 (D). Cotton Specialist, U. S. Dept. of Agri- 
culture, Washington, D. C. 
Carlow, Charles L., II, '26 (D). Overseer of Weaving, Berkshire Cotton 

Mills, Adams, Mass. 
Carlson, Sigfred A., Ill, '26 (D). Consulting Chemist, Boston Elevated 

Railways, 536 Harrison Ave., Boston, Mass. 
Carlson, Theodore E., I, '28 (D). Asst. Supt., United Rayon Mills, Fall 

River, Mass. 
Carroll, Russell A., HI, '36 (D). With Drysalters Co., Chicago, 111. 
Carvalho, Joao B. deM., I, '20 (D). 207 7 de Setembre, Sala 1, Sobrado, Rio 

de Janeiro, Brazil, S. A. 
Cassidy, Elizabeth B., Ill, '22 (D). School Teacher, 69 Tremont St., New 

Bedford, Mass. 
Cazenove, James O'H., I, '05 (D). 
Chace, Mason E., Ill, '35 (D). Clerk, Morse Twist Drill & Machine Co., 

New Bedford, Mass. 
Chace, Kenneth V., Ill, '37 (D). Student, N. C. State College, Raleigh, N. C. 
Chan, Annie C, IV, '23 (C). The Foot Ease Hosiery Mfg. Co., 2612 E. 

Yuhang Road, Shanghai, China. 
Chang, Chih Y., I, '08 (D). 
Chang, Fa-Kien, I, '23 (C). Shantung, China. 


Chang, Mu W., S, '21 (C). 

Chase, Alton W., II, '09 (D). Overseer of Carding, Gosnold Mills Co., 

New Bedford, Mass. 
Chase, Raymond H., I, '10 (D). Superintendent, Potter Fine Spinners, Inc., 

Pawtucket, R. I. 
Checkman, Frank E., I, '23 (D). West Wareham, Mass. 
Chen, Ting F., I, '12 (D). 
Chesebro, Robert E., IV, '24 (C). Secretary and Treasurer, Hand Knit 

Hosiery Co., Sheboygan, Wis. 
Childs, Raymond C, III, '32 (D). Chemist, National Aniline & Chemical 

Co., Buffalo, N. Y. 
Chow, Frank L. H., S, '14 (C). Superintendent, Loo Fong Cotton Mills, 

Shantung, China. 
Church, Morton LeB., S, '04 (C). Southern Representative of Catlin & Co., 

1017 Commercial Bank Bldg., Charlotte, N. C. 
Ciborowski, Mitchell S., S, '34 (C). New Bedford, Mass. 
Cierpial, Leon J., IX, '33 (C). Machinist, Newport Naval Torpedo Station, 

Newport, R. I. 
Clancy, Martin F., I, '25 (D). Comber Man, Queen City Cotton Mill, Bur- 
lington, Vt. 
Clark, Kenyon H., V, '11 (D). 

Clark, Ralph H., Ill, '35 (D). With Nashua Finishing Co., Nashua, N. H. 
Clarke, Edward W., I, '13 (D). 

Clarke, William T., Ill, '33 (D). With Arkwright Co., Fall River, Mass. 
Cleveland, Frank H., Ill, '34 (D). Chemist, Revere Copper & Brass, Inc., 

New Bedford, Mass. 
Coates, James E., Jr., I, '22 (D). Cost Department, Utica Steam & Mohawk 

Valley Cotton Mill, Utica, N. Y. 
Cody, Edmond, I, '23 (C). Attleboro, Mass. 
Cohen, Barney, I, '33 (D). With Nathan Cohen (Meats), 1029 Acushnet 

Ave., New Bedford, Mass. 
Cohen, Morris H., Ill, '35 (D). New Bedford, Mass. 
Collins, Henry I, '24 (D). With Collins Bros., Pawtucket, R. I. 
Colwell, Arthur F., Jr., IX, '36 (C). With Hathaway Machinery Co., Fair- 
haven, Mass. 
Cook, Preston W., Ill, '31 (D). With Glenlyon Print Works, Phillipsdale, 

R. I. 
Cook, Seabury, S, '25 (C). New Bedford, Mass. 
Cookson, Albert, I, '23 (D). Overseer of Spinning, Cannon Co., Kannapolis, 

N. C. 
Cooper, John J. W., I, '05 (D). With E. P. Sheldon & Sons, 1008-1010 

Hospital Trust Bldg., Providence, R. I. 
Cornell, Harold C, I, '11 (D). Custom Service, U. S. A. (89 Lincoln St), 

Dedham, Mass. 
Cornell, Maurice A., I, '21 (D). Master Mariner, South Dartmouth, Mass. 
Cornish, Ruth C, II, '22 (C). Quincy, Mass. 
Corson, Sidney W., I, '05 (D). Overseer of Carding, Oneita Knitting Mills, 

Utica, N. Y. 
Craig, James, Jr., Ill, '35 (D). With Pontiac Finishing Co., Pontiac, R. I. 
Crawford, Fred E., II, '22 (D). Salesman, John S. Cheever Co., Boston, 


Crossley, Lawton, III, '16 (C). 

Crowley, Joseph J., Ill, '35 (D). With U. S. Testing Co., Cleveland, Ohio. 

Cumming, Robert W., Jr., II, '26 (C). With J. & P. Coates Co., Pawtucket,' 

R. I. 
Currie, Andrew, Jr., I, '02 (D). Oil Operator, 1800 Highland Ave., Shreve- 

port, La. 


Curry, Walter F., Ill, '24 (D). With the Apponaug Co., Apponaug, R. I. 
Cygan, Henry F., IX, '32 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Czehowski, Henry, S, '29 (C). 112 County Street, New Bedford, Mass. 

Dalrymple, George S., Ill, '22 (D). , 

Damon, A. Durfee, III, '31 (D). Chief Chemist, Dutchess Bleachery, Wap- 
pinger's Falls, N. Y. 

Darling, Elton R., Ill, '13 (D). Director of Research, Cornstalk Products 
Co., Danville, 111. 

Davies, James A., Ill, '34 (D). With Apponaug Company, Apponaug, R. I. 

Davis, Albert H., I, '16 (C). Commission Merchant and Broker of cotton 
yarns and fabrics, 79 Verndale Ave., Providence, R. I. 

Davis, Francis J., I, '26 (D). In garage in Fitchburg, Mass. 

Davis, Russell O., VI, '27 (C). With Wauregan Mills, Wauregan, Conn. 

Deane, Robert J., Ill, '17 (D). Sales Representative for textile firm. 

Delano, Lloyd S., I, '07 (D). Superintendent of Weaving, Amoskeag Manu- 
facturing Co., Manchester, N. H. 

Delano, Stephen C. L., IX, '33 (C). With New Bedford Rayon Co., New 
Bedford, Mass. 

Delay, John T., Ill, '17 (D). Chemist, Merrimac Chemical Company, Ever- 
ett, Mass. 

DeMarco, Henry J., S, '30 (C). With Shelton Mills, Shelton, Conn. 

DeMarest, R. Alfred, III, '33 (D). With Lawton Mills, Plainfield, Conn. 

DeMartin, Richard S., VI, '06 (D). 

Dennis, Charles W., Ill, '32 (D). Apponaug Co., Apponaug, R. I. 

Deptula, Henry, I, '36 (D). With Prudential Insurance Co., Fall River, 

Deptula, Walter J,. I, '31 (D). With Devonshire Mills, New Bedford, Mass. 

Deu, Yee B., I and IV, '08 (D). 

DeVine, Richard I, '26 (D). Salesman, North American Rayon Corp., 
Elizabethtown, Tenn. 

Devoll, Milton C, II, '09 (D). Cotton Broker, 488 Pleasant St., New Bed- 
ford, Mass. 

Dewey, Edward W., V, '11 (D). Superintendent and Buyer, Bennington 
Hosiery Company, Bennington, Vt. 

Dick, Rudolph C, I, '13 (D). Treasurer and General Manager, Pequot 
Mills, Salem, Mass. 

Diggle, Elmer W., I, '37 (D). Whitin Machine Works, Whitinsville, Mass. 

Dixon, Fred M., Jr., S, '17 (C). 

Doherty, Edward P., II, '04 (D). Doherty's Protective Agency, New Bed- 
ford, Mass. 

Dolan, Edward F., S, '14 (C). Proprietor of Ohio Threading and Supply 
Co., Burkburnett, Texas. 

Donaghy, Paul A., Ill, '22 (D). Salesman, Corn Products Refining Co., 47 
Farnsworth St., Boston, Mass. 

Donnelly, Christopher L., Ill, '35 (D), New England Screw Co., Boston, 

Dow, James B., I, '30 (D). Assistant to Mr. Conrad, The Conrad Manufac- 
turing Co., Pawtucket, R. I. 

Dowd, Owen J., Jr., S, '31 (C). Employed in Utica, New York. 

Drozek, M. Peter, I, '29 (D). With Devon Mill, New Bedford, Mass. 

Dubiel, Mark T., Ill, '32 (D). Chiropodist, New Bedford, Mass. 

Duckworth, George H., S, '23 (C). Federal Prohibition Agent, Baltimore, 

Duflot, John, I, '24 (C). Asst. Mgr., W. C. Jones, 19 Rue d'Avesnes, Lille, 
(Nord) France. 


Duncan, Donald T., II, '21 (C). With H. R. Mallinson, 509 Madison Ave., 
New York City, N. Y. 

Dunmore, Earl W., V, '11 (D). Superintendent, Utica Knitting Company, 
Mill No. 2, Utica, N. Y. 

Dunn, Edward F., I, '24 (D). Building Wrecker, 144 Wayland Ave., Apt. 8, 
Providence, R. I. 

Dupont, Emey, Jr., I, '25 (D). 

Dupre, Edmund J., Ill, '34 (D). New Bedford, Mass. 

Durfee, Laurence T., Jr., Ill, '36 (D). With Angier and Earle, Inc., Cam- 
bridge, Mass. 

Dutton, Howard O., Ill, '32 (D). With Crompton Velvet Company, West 
Warwick, R. I. 

Dutton, Ruth M,, VII, '35 (C). Fairhaven, Mass. 

Dwyer, Thomas J., Jr., Ill, '37 (D). Chemist, Burlington Finishing Co., 
Burlington, N. C. 

Edmondson, Norman V., Ill, '34 (D). Scott Tissue Co. and Meade Co., 

Brunswick, Ga. 
Edmundson, Christopher, Jr., IX, '34 (C). Bench Assembler, Brown & 

Sharpe, Providence, R. I. 
Edwards, Harold G., I, '19 (D). Treasurer, Bush & Company, Inc., New 

Bedford, Mass. 
Erickson, Gunnar F., IX, '37 (C). Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Espriella, Antonio J. de la, II, '15 (D). Manager Weaving and Designing 

Department, Espriella & Co., Cartagena, Colombia, S. A. 
Espriella, Justo de la, S, '13 (C). Manager of Cotton Yarn Department, 

Espriella & Co., Cartagena, Colombia, S. A. 
Espriella, Luis C. de la, I, '16 (C). With Espriella & Co., Cartagena, Colom- 
bia, S. A. 
Ewing, James H., Ill, '23 (D). With North American Rayon Corp., Eliza- 

bethton, Tenn. 

Fagan, Francis J., V, '12 (D). With Veterans' Relief Bureau, Utica, N. Y. 

Farr, William, Jr., S, '29 (C). With Naval Torpedo Station, Newport, R. I. 

Farrar, Hersey W., I, '17 (D). Designer, Hathaway Manufacturing Co., 
New Bedford, Mass. 

Farrow, Edward S., I, '29 (D). With Devon Mills, New Bedford, Mass. 

Fawcett, John L., I, '28 (D). Head of Knitting and Rayon Dept., New Bed- 
ford Textile School, New Bedford, Mass. 

Fead, Charles L., IV, '27 (C). Manufacturer of Heavy Wool Hosiery, John 
L. Fead & Sons, Port Huron, Michigan. 

Feen, Edward F., I, '21 (D). Textile Engineer, Corning Glass Works, 
Corning, N. Y. 

Fell, Cecil, I, '30 (D). With Goodyear Tire Co., Akron, Ohio. 

Fenton, Miriam A. F., S, '34 (C). Clerk, N. B. Dry Goods Co., New Bed- 
ford, Mass. 

Fessenden, Charles E., II, '14 (D). With Associated Sales Co., Inc., 1350 
Broadway, New York City, N. Y. 

Few, George P., VI, '17 (C). Superintendent Profile Cotton Mills, Jackson- 
ville, Ala. 

Finnell, Everett G., HI, '24 (D). C. C. C. Camp, Westfield, Mass. 

Fischer, Raymond E., IX, '37 (C). With Grim-Grip, Inc., E. Freetown, 

Fish, Myron C, VI, '02 (D). Secretary, American Supply Company, and 
Treasurer, Rhode Island Yarn Company, Providence, R. I. 

Flaherty, Matthew W., Ill, '22 (D). Clerk, Post Office, New Bedford, Mass. 


Flynn, Edmund K., I, '36 (D). With U. S. Testing Co., Chicago, 111. 

Forbes, Esley H., I, '02 (D). Farmer, Gastonia, N. C. 

Foster, Edward J., I, '24 (D). U. S. Bureau of Standards, Philadelphia, Pa. 

Foster, James E., S, '22 (C). Instructor, Junior High School, New Bedford, 

Foster, John E., S, '29 (C). Instructor, New Bedford Textile School, New 
Bedford, Mass. 

Francis, George F., IV, '24 (C). New Bedford, Mass. 

Freeman, Elmer L., V, '06 (D). President and Manager, Freeman Manu- 
facturing Company, Detroit, Mich. 

Freeman, Leo, III, '20 (C). Chemical Engineer, Room 42, Reymond Bldg., 
Baton Rouge, La. 

French, Dean A., VI, '19 (C). Salesman, Gastonia Roller Flyer & Spindle 
Co., Gastonia, N. C. 

French, Morton T., IV, '12 (D). With Scott & Williams, Inc., 366 Broadway, 
New York City, N. Y. 

Freschl, Max A., IV, '09 (D). Vice-President Holeproof Hosiery Company, 
Milwaukee, Wis. 

Friedberg, Edward A., Ill, '30 (D). Assistant Dyer, Harodite Finishing 
Company, North Dighton, Mass. 

Frodyma, John I., '33 (D). New Bedford, Mass. 

Frost, Allen L., Ill, '37 (D). New Bedford, Mass. 

Frost, Irving B., Ill, '34 (D). Foreman, Arkwright Mills, Fall River, Mass. 

Fuller, Everert H., Ill, '17 (D). Assistant Superintendent, Hampton Com- 
pany, Easthampton, Mass. 

Gallagher, John V., IV, '08 (D). 

Galligan, Francis B., IV, '31 (D). Fabric Development Dept., Goodyear Tire 

Company, New Bedford, Mass. 
Gammons, Molly Nye, II, '18 (C). Mrs. Warren Tobey, Barrington, R. I. 
Gardner, George C, Jr., I, '31 (D). Salesman, J. S. Fallow & Company, 

New Bedford, Mass. 
Gast, Paul R., Ill, '16 (C). 
Gatonska, Henry, IX, '33 (C). With Continental Wood Screw Co., New 

Bedford, Mass. 
Gay, Paul F., I, '10 (D). Overseer of Carding, Kendall Mills, New Bedford, 

Gentilhomme, Roger C. J., I, '33 (D). Inspector of Textiles, U. S. War 

Dept., Philadelphia, Pa. 
George, Edwin V., IX, '37 (C). With Atlas Tack Co., Fairhaven. Mass. 
Geyer, Fred N., IX, '33 (C). With New Bedford Rayon Co., New Bedford, 


Giante, Antone J., I, '34 (D). 

Gifford, Thomas T., I, '01 (D). With Pierce Manufacturing Corp., New 

Bedford, Mass. 
Giguere, Laurence O., Ill, '36 (D). New Bedford, Mass. 
Gillett, Thomas, I, '35 (D). With Goodyear Fabric Corp., New Bedford, 

Gillingham, Dana H., Ill, '10 (D). Cotton Merchant, 420 Acushnet Ave., 

New Bedford, Mass., Sales Manager, New Bedford Rayon Co., New 

Bedford, Mass. 
Gilmore, Daniel R., I, '22 (D). Farmer, Acushnet, Mass. 
Gobeil, Norman B., Ill, '33 (D). J. P. Stevens, 44 Leonard St., New York, 

N. Y. 
Goff, Russell E., VI, '15 (C). Cotton Broker, Boston, Mass. 
Goldberg, Bertram, IV, '13 (D). Treasurer, Bertram Goldberg, Inc., Silk 

Dyers, Johnstown, N. Y. 


Goldberg, Meyer N., IX, '37 (C). 

Gonsalves, John P., IX, '32 (C). A. Gonsalves & Sons, Fairhaven, Mass. 
Goodell, Shirley M., IX, '36 (C). With Pratt & Whitney, Hartford, Conn. 
Goodwin, Albert W., II, '11 (D). With Bruns-Nordeman Co., Inc., New 

York, N. Y. 
Gosselin, Henry J., S, '25 (C). Machinist, The New Departure Co., Bristol, 

Goulet, Henry J. O., I, '04 (D). 
Goward, Niles W., I, '15 (D). 
Grady, John H., Ill, '07 (D). Manager, John Campbell & Co., 99 Bedford 

St., Boston, Mass. 
Gray, Ralph B., Ill, '27 (C). In Laboratory, Vacuum Oil Company, Pauls- 

boro, N. J. 
Greaves, John, Jr., Ill, '35 (D). Student, N. C. State College, Raleigh, N. C. 
Green, Charles H., S, '22 (C). Jersey Shore, Pa. 
Greene, Dan E., S, '18 (C). Electrician, Woonsocket Rubber Company, 

Millville, Mass. 
Greenough, Herbert E., Ill, '36 (D). Dept. Foreman, DuPont Rayon Co., 

Richmond, Va. 
Grimshaw, Albert H., Ill, '16 (G). Associate Professor of Dyeing, North 

Carolina State College, Raleigh, N. C. 
Gunderson, Edgar A., Ill, '37 (D). With Revere Copper & Brass, Inc., New 

Bedford, Mass. 

Haarla, Rauno, A. V., I, '26 (D). Assistant Technical Director, o/y Suomen 
Trikootehdas, Tampere, Finland. 

Hadley, Wade H., VI, '00 (D). Secretary and Treasurer, Gregson & Dorsett, 
Siler City, N. C. 

Hahn, Louis H., II, '18 (D). Proprietor, Novelty Fabric Co., 1244 Acushnet 
Ave., New Bedford, Mass. 

Hale, Charles E., Jr., I, '22 (D). Publicity and Advertising, "The Musical 
Courier" New York, N. Y. 

Hall, Ernest H., Jr., I, '34 (D). Clerk, Dartmouth Mills, Inc., New Bedford, 

Hall, Gordon K., IX, '33 (C). With Union Street Railway Co., New Bed- 
ford, Mass. 

Hall, Lincoln, S, '14 (C). 

Hall, Walton, Jr., VI, '06 (D). Judge of Probate, District of East Haddam, 
Moodus, Conn. 

Hamasaki, Shunkichi, S, '30 (C). 

Hamer, Allan K., S, '15 (C). Boston, Mass. 

Hamlen, Carleton LeB., Ill, '11 (D). With Hood Milk Co., Boston, Mass. 

Hamlen, Walter G., Jr., Ill, '17 (D). Demonstrating Salesman, E. I. Du- 

pont de Nemours & Co., 128 So. Front St., Philadelphia, Pa. 
Hamrick, Lyman A., VI, '20 (C). Superintendent and General Manager, 

Musgrove Mills, Gaffney, S. C. 
Hanson, Charles F., HI, '33 (D). With Farwell Bleachery, Lawrence, Mass. 
Hardy, Carl L., I, '36 (D). Post Graduate Work, New Bedford Textile 

School, New Bedford, Mass. 
Hardy, Hudson E., I, '24 (D). Fabric Technician, Devonshire Mills Co., Inc., 

425 Fourth Ave., New York, N. Y. 
Harney, Joseph J., I, '22 (D). Foreign Representative, Firestone Cotton 

Mills, Buenos Aires, S. A. 
Harper, Powhatan F., VI, '23 (C). Foreman of Yard Force, Receiving and 

Shipping Clerk, Cotton Classer, Spray Cotton Mills, Spray, N. C. 
Harrison, John, III, '36 (D). Fall River, Mass. 
Haskins, Ernest T., IX, '27 (C). Chauffeur, 57 St. Germain Street, Boston, 



Hathaway, Russell, I, III, '16 (D) (C). Manager Hathaway Laundry, New 
Bedford, Mass. 

Hathaway, William B., Jr., I, '35 (D). With Kendall Co., New Bedford, Mass. 

Hayden, Paul A., I, '25 (D). St. Thomas Hospital, Akron, Ohio. 

Hayward, Caleb A., Jr., V, '11 (D). Salesman, C. A. Hayward & Son, Con- 
fectionery Agents, Brokers and Jobbers, New Bedford, Mass. 

Hayward, Harold W., I, '16 (D). With D. E. H. Chemical Co., 277 Highland 
Ave., Somerville, Mass. 

Heap, Harold, II, '23 (C). With Berkshire Fine Spinning Co., 40 Worth 
St., New York City, N. Y. 

Heath, Roger A., Ill, '23 (D). Assistant Colorist, Passaic Print Works, 

Heinser, Alfred W., Jr., Ill, '35 (D). 119 High St., Portland, Me. 
Herstoff, Milton W., I, '35 (D). With Farr Alpaca Co., Holyoke, Mass. 
Herzog, Emil, IX, '34 (C). J. C. Rhodes & Co., New Bedford, Mass. 
Hiller, Raymond N., Ill, '34 (D). With Goodyear Tire Co., Akron, Ohio. 
Hillman, John V., IX, '37 (C). Mattapoisett, Mass. 
Hinckley, Frank E., Ill, '12 (D). Chief Pharmacist's Mate, United States 

Navy, c/o Bureau of Navigation, Washington, D. C. 
Hoffman, Frank A., VI, '24 (C). Designer, Gosnold Mills, New Bedford, 

Holden, Stuart, IX, '34 (C). Machinist, Paulding & Co., New Bedford, 

Holland, Warren E., II, VI, '11 (D). Treasurer, Darlington Warehouse 

Company, Box 96, Pawtucket, R. I. 
Hollas, James B., I, '25 (D). With Scheuer & Co., 72 Leonard St., New 

York, N. Y. 
Holmes, Leander, I, '27 (C). With Asheville Cotton Mills, Asheville, N. C. 
Holmstrom, Arthur C, IX, '34 (C). With Morse Twist Drill & Machine Co., 

New Bedford, Mass. 
Hood, John H., I, '25 (C). Assistant Treasurer, Bowling Green Spinning 

Mills, Blacksburg Spinning Mills, Globe Manufacturing Company, 

Clover, S. C. 
Horton, Harold W., I, '19 (D). Dealer in New and Used Textile Machinery, 

Room 438, 49 Westminster St., Providence, R. I. 
Horvik, Sigurd, IV, '22 (D). Superintendent, a/s Salhus Tricotage-fabrik, 

Salhus, near Bergen, Norway. 
Horvitz, Milton M., Ill, '37 (D). New Bedford, Mass. 
Hotte, George H., Ill, '32 (D). Firestone Corp., Akron, Ohio. 
Houth, Joseph, Jr., Ill, '24 (D). Superintendent, Clearwater Mfg. Co., 

Clearwater, S. C. 
Howard, Arthur F., Jr., I, '25 (D). Overseer, Nonquitt Mills, New Bedford, 

Howarth, Robert, IX, '35 (D). With Continental Wood Screw Co., New Bed- 
ford, Mass. 
Howell, H. Comer, VI, '23 (C). With Bibb Mfg. Co., Macon, Ga. 
Howland, Kempton S., Ill, '32 (D). Chemist, New Bedford Rayon Co., New 

Bedford, Mass. 
Howland, Ralph S., I, '13 (D). Purchasing Agent, Kendall Company, Wal- 

pole, Mass. 
Howland, Stewart M., Ill, '35 (D). New Bedford, Mass. 
Hoxie, Mildred, S, '32 (C). With Kilburn Mill, New Bedford, Mass. 
Hsaio, Chen H., VI, '22, I, '25 (C). Hunan First Cotton Mill, Changsha, 

Hunan, China. 
Hsu, Yeishan, I, '25 (D). 
Hung, Shao-Yu, III, '16 (C). 
Hunt, Russell W., Ill, '21 (C). Dyer, Franklin Process Co., Philadelphia, 



Hurley, James K., I, '24 (D). With Southeastern Cottons, Inc., 58 Worth 

St., New York City, N. Y. 
Hutchinson, John J., I, '02 (D). Laundry Proprietor, Los Angeles, Cal. 
Hynes, Thomas, S, '33 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 

Ing, David P. E., Ill, '24 (D). With Shantung Silk & Lace Co., Ltd., 865 
Suipacha, Buenos Aires, Argentine, S. A. 

Jackson, S. Eugene, VI, '07 (D). Assistant Treasurer, Crown Manufactur- 
ing Company, Pawtucket, R. I. 

Jasionek, Frank, IX, '35 (C). With Revere Copper & Brass Co., New Bed- 
ford, Mass. 

Jay, A. Sidney, S, '21 (C). Assistant to the Agent, The W. A. Handley Mfg. 
Co., Roanoke, Ala. 

Jenks, Raymond M., I, '15 (D). Cost Clerk, West Boylston Manufacturing 
Company, Easthampton, Mass. 

Jenks, Robert R., VI, '11 (C). President Fales & Jenks Machine Company, 
and Treasurer Woonsocket Machine & Press Company, Woonsocket, 
R. I. 

Jennings, Everett C, III, '26 (D). With Arkwright Co., Fall River, Mass. 

Jennings, Harold W., S, '21 (C). 55 Court Street, New Bedford, Mass. 

Jewell, Robert H., Ill, '20 (C). Treasurer, Crystal Springs Bleachery Com- 
pany, Chickamauga, Ga. 

Johnson, Horace E., Ill, '16 (C). Chemist, Bell Telephone Laboratories, 
463 West Street, New York City, N. Y. 

Johnson, J. Earle, III, '35 (D). With Sherwin Williams Co., Newark, N. J. 

Jones, Louis, S. '23 (C). 35 Elm Street, New Bedford, Mass. 

Jourdain, Henry M., I, '18 (D). Letter Carrier, Post Office, New Bedford, 

Joy, Walter, III, '25 (C). Factory Manager, Bristol Mfg. Co., Bristol, R. I. 

Judge, Edward E., I, '12 (D). Overseer, Gosnold Mills Company, New Bed- 
ford, Mass. 

Judson, David H., IV, '34 (D). With Hitchcock & Curtiss Knitting Co., 
Nashua, N. H. 

Kagan, Peter M., VI, '24 (C). With Walter Simpson, Inc., 42 South Water 

St., Providence, R. I. 
Kallish, Frank, I, '11 (D). Designer, Utica Steam & Mohawk Valley Cotton 

Mill, Utica, N. Y. 
Kanter, Harry, I, '23 (D). Designer, Toepher & Myers, 4 and 6 White St., 

New York City, N. Y. 
Karl, Roger T., I, '30 (D). With Firestone Cotton Mills, New Bedford, 

Karl, William A., I, '19 (D). Purchasing Agent, Firestone Tire & Rubber 

Company, Akron, Ohio. 
Kean, George P., II, '04 (D). Superintendent, Nyanza Mills, Woonsocket, 

R. I. 
Keith, Wendell T., IX, '35 (C). With Baker Machine Co., New Bedford, 

Kelty, Pharus T., I, 20 (C). 
Kenney, Leo P., Ill, '37 (D). Post Graduate Work, New Bedford Textile 

School, New Bedford, Mass. 
Kershaw, James E., IX, '34 (C). U. S. Army, Fort Devens, Mass. 

Kestenbaum, Irving, IX, '36 (C). In a C. C. C. Camp. 

Ketcham, Melville K., S, '21 (C). General Manager, Wellington Sears Co., 

258 So. 18th St., Philadelphia, Pa. 
Kiluk, Kasimierz, IX, 'S3 (C). With Morse Twist Drill & Machine Co., 

New Bedford, Mass. 


Kinney, C. Stanley, I, '15 (D). Manager, Troy Laundry Company, 183 Ex- 
change St., Pawtucket, R. I. 

Kirschbaum, Erwin P., Ill, '26 (C). Chemist, New Bedford Gas & Edison 
Light Co., New Bedford, Mass. 

Knowlton, Mark W., Jr., I, '37 (D). K's Coffee House, New Bedford, Mass. 

Ko, Thomas S., S, '20 (C). Engineer, Textile Department, Anderson, Meyer 
& Co., Ltd., Shanghai, China. 

Koczera, Stanley A., I, '37, (D). Post Graduate Work, New Bedford Tex- 
tile School, New Bedford, Mass. 

Kolodny, Meyer Z., S, '21 (C). Machine Fixer, Allen & Co., Black Cat 
Hosiery Mills, Kenosha, Wis. 

Kolodziey, Joseph, I, '24 (D). With Hathaway Manufacturing Co., New 
Bedford, Mass. 

Kosiba, Edward A., I, '37, (D). Post Graduate Work, New Bedford Tex- 
tile School, New Bedford, Mass. 

Kovar, Paul M., I, '37 (D). Testing Room, Nonquitt Mills, New Bedford, 

Kravetz, Joseph, VI, '25 (C). With Fix-Rite Shoe Stores, H. Kravetz & 
Son, 343y 2 Cedar & 54 Mt. Vernon Sts., New Bedford, Mass. 

Kroudvird, William, III, '32 (D). Kroudvird's Bakery, New Bedford, Mass. 

Krumholz, George B., Jr., Ill, '36 (D). U. S. Testing Co., Hoboken, N. J. 

Kuczewski, Eugene J., II, '33 (D). Bookkeeper, 1692 Acushnet Ave., New 
Bedford, Mass. 

Kuwaski, Francis A., I, '34 (D). New Bedford, Mass. 

Kwan, Sze Keen, I, '24 (D). Sales Manager, Full-Moon Knitting Factory, 
Shanghai, China. 

Kwok, Taai W., I, '26 (D). With Wing On Textile Mfg. Co., Nanking 
Road, Shanghai, China. 

Labrode, Henry C, I, '11 (D). Pawtucket, R. I. 

Lacerda, Armando, IX, '36 (C). With John I. Paulding, Inc., New Bedford, 

Lachance, Edgar, I, '32 (D). Designer, Powdrell & Alexander Co., Daniel- 
son, Conn. 

LaCosta, Joaqumi, III, '30 (D). Interne, Boston City Hospital, Boston, 

Ladino, John M., Ill, '29 (D). Chemist, Diamond Alkali Co., Painesville, 

Lafferty, Edward C, III, '32 (D). With Pacific Mills, Lawrence, Mass. 

Lague, James C, III, '33 (D). With Taunton Oil Cloth Co., Taunton, Mass. 

Lane, Daniel A., S, '23 (C). New Bedford, Mass. 

Languirand, Marcel J., IX, '35 (D). New Bedford, Mass. 

Lassow, Samuel, II, '29 (D). Inspector of Textiles in Quartermasters' 
Corps, U. S. Army, Philadelphia, Pa. 

Law, Kwok L., I, '24 (D). Hong Kong, China. 

Leahy, William T., Jr., I, '36 (D). With Revere Copper & Brass, Inc., New 
Bedford, Mass. 

Le Beau, Emil C, III, '30 (D). With National Aniline & Chemical Co., 
Buffalo, N. Y. 

Lee, J. K. Theodore, VI, '23 (C). Supply Department, Peking-Mukden Rail- 
way Line, Tientsin, China. 

Lee, Sik C, I, '25 (D). With Wing On Textile Manufacturing Co., Ltd, 
Shanghai, China. 

Lee, Tung H., VI, '24 (C). Vocational School, Wuhu, China, or 29 S Sing 
Shung Li. Dela Tour, Shanghai, China. 

Lee, William A., I, '07 (D). Clerk, Mills Manufacturing Company, Green- 
ville, S. C. 


Lenhart, Edmund, III, '16 (C). Proprietor, Lenhart's Pharmacy, New Bed- 
ford, Mass. 

Levine, Edmund J., Ill, '37 (D). In charge of Drug Room, Triangle Finish- 
ing Co., Johnstown, N. Y. 

Levovsky, George A., Ill, '27 (D). New Bedford, Mass. 

Levy, Henry M., S, '21 (C). With the Everwear Hosiery Company, Mil- 
waukee, Wis. 

Lewis, Don C. .C, S, '17 (C). Automobile Salesman, Westport, Mass. 

Lewis, Maurice A., Ill, '13 (D). With Doe & Ingalls, 198 Milk St., Boston, 

Lewis, Richard H., Ill, '35 (D). In laboratory, Ciba Co., New York, N. Y. 

Lewis, William C. T., I, '22 (D). Assistant Superintendent, Westport Man- 
ufacturing Co., Westport Factory, Mass. 

Li Kung, I, '07 (D). Professor of the National Institute of Technology, 
Peiping, China. 

Liebmann, Robert E., Jr., II, '25 (C). With A. Steinan Co., Inc., 114 Bleec- 
ker St., New York City, N. Y. 

Lincoln, Edward A., S, '30 (C). Better Fabrics Testing Bureau, New York, 
N. Y. 

Lindberg, Herbert A., I, '32 (D). Salesman, Pierce & Hook, Inc., New Bed- 
ford, Mass. 

Linderson, Carl A., I, '21 (D). Overseer, Card Room, Devon Mills, New Bed- 
ford, Mass. 

Lipsett, Leon, I, '36 (D). Baraboo, Wis. 

Lipson, Edward, S, '21 (C). 

Livesey, Benjamin, Jr., Ill, '11 (D). 

Livesley, Howard P., IX, '34 (C). With Morse Twist Drill & Machine Co., 
New Bedford, Mass. 

Livingstone, Joseph A., S, '14 (C). Overseer, Wamsutta Mills, New Bed- 
ford, Mass. 

Lo, Ting Y., I, '07 (D). Dean and Professor of Textile Dept. of Technical 
College (Sect. I) of Peking University; Managing Director of Kai 
Yuen Woolen & Carpet Factory, Peking, China. 

Lobley, Fay G., I, '24 (D). New Bedford, Mass. 

Lock, Robert F. K., I, '20 (D). Erecting Engineer, Wah Chang Trading 
Corp., (Sole Agents for Woonsocket Textile Machinery), P. 0. Box 
1178, Shanghai, China. 

Lonergan, David J., II, '16 (C). With Federated Textiles, Inc., 30 Varick 
St., New York City, N. Y. 

Lopes, Joseph S, '31 (C). 87 Acushnet Avenue, New Bedford, Mass. 

Loring, Andrew C, I, '26 (D). Elevator Operator, Municipal Building, New 
Bedford, Mass. 

Loud, Everett C, I, '27 (D). Utility Man, Lorraine Mfg. Company, Paw- 
tucket, R. I. 

Lovejoy, Charles F., IX, '36 (C). With Lincoln Machine Co., Pawtucket, 
R. I. 

Lowther, John M., I, '24 (D). Representative of Chas. A. Schieren Co., 146 
Smith St., New Bedford, Mass. 

Luce, Bradford A., I, '22 (D). With Fiske Rubber Co., Chicopee Falls, 

Lynam, Ralph L., IX, '32 (C). With Fibro Products Co., New Bedford, 

MacColl, William B., II, '05 (D). President, Lorraine Manufacturing Co., 

Pawtucket, R. I. 
Macia, William F., I, '28 (D). With Throwsters Research Institute, Inc., 

468 Fourth Ave., New York, N. Y. 
MacKenzie, John A., II, '07 (D). Alcohol Unit of Internal Revenue, U. S. 



Macy, Andrew W., I, '07 (D). Treasurer, Taber Mill, New Bedford, Mass. 
Macy, Edwin H., I, '23 (D). President, Macy Manufacturing Co., 95 Court 
St., New Bedford, Mass. 

Madero, Alberto, S, '02 (C). Mexico. 

Mainville, Alfred J., II, '22 (D). Supt. of Weaving, Brupbacker Silk Mills, 

Ltd., Valleyfield, P. Q., Canada. 
Malick, Albert, III, '33 (D). Charge of Providence Division Colloids, Inc., 

16 Delaney St., Newark, N. J. 
Manning, Lewis G., V, '10 (D). Lab. Technician, Dunlop Tire Co., Utica, 

N. Y. 
Marriott, Frederick A., I, '26 (D). With Thermord Rubber Co., Trenton, 

N. J. 
Martel, Henri, S, '29 (C). Ave La Paz 699, Guadalajara, Mexico. 
Martins, Antonio R., S, '20 (C). New Bedford, Mass. 
Mason, Joseph E., II, '23 (C). 
Matthews, Irving F., I, '25 (C). Salesman, 227 Union St., Room 510, New 

Bedford, Mass. 
Maxfield, Linden H., I, '26 (D). Designer, Lorraine Manufacturing Co., 

Pawtucket, R. I. 
McArdle, William F., Ill, '33 (D). With Norschner Dye Works, Newton, 

McCann, William M., Ill, '26 (D). 
McCormick, Harold E., I, '37 (D). Heineman & Seidman, Textile Brokers, 

New York, N. Y. 
McCraw, French Z., S, '26 (C). With The Irene Mills, Gaffney, S. C. 
McDevitt, Francis O., I, '22 (C). Salesman, Heinman and Seidman, New 

York, N. Y. 
McDonald, Thomas J., Ill, '27 (D). Chemist, United Merchants and Manu- 
facturers Laboratory, Langley, S. C. 
McEvoy, Leo A., S, '22 (C). With Knitted Padding Co., 105 Chapman St., 

Canton, Mass. 
McEvoy, Raymond R., I, '19 (C). Assistant Superintendent, The Knitted 

Padding Co., Canton, Mass. 
McEwen, Ellsworth S., S, '18 (C). With Bankers' Trust Co., 10 Wall St., 

New York City, N. Y. 
McGaughey, Arthur E., IX, '32 (C). With Continental Wood Screw Co., 

New Bedford, Mass. 
McGinn, Walter E., Ill, '17 (D). Sales Engineer, 29 Shawmut Ave., Mans- 
field, Mass. 
Mdsaac, Harold J., I, '19 (D). 213 Court St., New Bedford, Mass. 
McKnight, John D., I, '22 (C). Converter, Nuess, Hesslein & Co., Inc., 53 

White St., New York City, N. Y. 
McMullen, Francis E., I, '36 (D). With Pacific Mills, Rayon Div., Lawrence, 

McNeely, Thomas J., II, '01 (C). Supt., Rhodes-Rhyme Mfg. Co., Lincoln- 
ton, N. C. 
Meagher, Gregory F., V, '29 (D). State Milk Inspector, Boston, Mass. 
Mello, Antone J., IX, '37 (C). Atlas Tack Co., Fairhaven, Mass. 
Mello, Frank, IX, '34 (C). With Morse Twist Drill & Machine Co., New 

Bedford, Mass. 
Mendrala, Aloysius, I, '31 (D). With Lorraine Mfg. Company, Pawtucket, 

R. I. 
Mercer, George C., Jr., Ill, '22 (C). With Milbank Bleachery, Lodi, N. J. 
Mikus, Frank J., Ill, '33 (D). With American Printing Co., Fall River, 

Miller, Wallace J., I, '22 (D). Assistant Superintendent and Cotton Classer, 

Crown Manufacturing Co., Pawtucket, R. I. 
Mills, Clayton W., I, '26 (C). With Cold Spring Bleachery, Yardley, Pa. 


Mills, Otis P., Jr., I, '05 (D). Automobile Distributor and Real Estate, 
Augusta St., Greenville, S. C. 

Mitchell, George T., I, '36 (D). With U. S. Testing Co., New York, N. Y. 

Mitchell, Walter R., Jr., Ill, '37 (D). Proprietor, Tasker's Market, New 
Bedford, Mass. 

Molins, Andres, II, '28 (C). Designer, 1 Calle Poniente No. 41, San Sal- 
vador, Central America. 

Moore, Carroll C, I, '27 (D). Cost Accounting Job in Chicago, 111. 

Moore, Stephen R., II, '13 (D). With Philadelphia Steel Heddle Manufac- 
turing Co., Philadelphia, Pa. 

Moore, William H., S, '22 (C). Twister Section Hand, A. M. Smyre Mfg. 
Co., Gastonia, N. C. 

Morris, David H., S, '31 (C). 571 East 140th Street, New York City, N. Y. 

Morris, Edith A., S, '33 (C). With Wamsutta Mills, New Bedford, Mass.. 

Morris, Theodore P., VI, '19 (C). Superintendent, Ridge Mills, Inc, Gas- 
tonia, N. C. 

Morrison, Julian K., VI, '20 (C). President, Brighton Mills, Passaic, N. J. 

Morse, Alice L., II, '22 (C). 

Morton, Phillips T., Ill, '32 (D). With Glenlyon Print Works, Phillipsdale, 
R. I. 

Morton, Walter E., VI, '23 (C). Cotton Classer and Overseer of Carding, 
Lafayette Cotton Mills, Inc., Lafayette, Ala. 

Moss, Milo, L., VI, '01 (D). New Bedford, Mass. 

Muggleton, A. Lincoln, IX, '34 (C). With Pairpoint Corp., New Bedford, 

Mullarkey, Joseph F., Jr., I, '26 (D). New Bedford, Mass. 

Mung, Theodore C, S, VI, '22 (C). 

Munroe, John F., Jr., Ill, '33 (D). With Bates Mfg. Company, Lewiston, 

Murley, John A., S, '34 (C). Fairhaven, Mass. 

Murphy, Edward L., Jr., IV, '26 (C). Assistant Instructor, New Bedford 
Textile School, New Bedford, Mass. 

Murphy, Edward M., Jr., Ill, '34 (D). With Clearwater Mfg. Co., Clear- 
water, S. C. 

Myers, Frederick H., Ill, '26 (D). With Windsor Print Works, No. Adams, 

Nash, Howard P., Jr., Ill, '25 (C). With Prosperity Co., Syracuse, N. Y. 
Neel, Albert G., V, '09 (D). Assistant Manager, Nazareth Waist Company, 

Nazareth, Pa. 
Nelme, Bennett D., II, '03 (D). Lumber and Farming, Wadesboro, North 

Carolina, Rt. No. 2. 
Nelson, James A., II, '22 (C). With Wabasso Cotton Co., Trois Rivieres, 

Quebec, Canada. 
Nichols, Henry W., II, '00 (D). Principal, Bradford Durfee Textile School, 

Fall River, Mass. 
Normile, Joseph W., V, '35 (D). Clerk, Sonotone New Bedford Co., New 

Bedford, Mass. 
Norris, Thomas L., Ill, '28 (D). Chemist, New Bedford Rayon Co., New 

Bedford, Mass. 
Northrop, William F., I, '16 (C). Salesman, Hopedale Manufacturing Com- 
pany, Milford, Mass. 
Northway, Ralph L,. Ill, '31 (D). 167 Center Ave., Middleboro, Mass. 
Novick, Joseph B., Ill, '25 (D). With Metropolitan Life Insurance Co., 

New Bedford, Mass. 

O'Brien, John N., Jr., S, '21 (C). Mattress Manufacturer, Comfortress Co.i 

New Bedford, Mass. 
O'Brien, Thomas B., VI, '11 (C). O'Brien Padawer, Inc., Cotton Waste and 

Linters, 202 W. 40th St., New York City, N. Y. 


O'Brien, William L., S, '15 (C). Prop., Pleasant View Cafe, New Bedford, 

O'Donnell, Thomas J., I, '26 (D). Fitchburg, Mass. 
Ogden, William H., Ill, '18 (D). With Watson-Park Co., 470 Atlantic Ave., 

Boston, Mass. 
O'Neil, John J., V, '06 (D). Optician, 389 Main St., Springfield, Mass. 
Orr, Charles F., Jr., I, '25 (C). Product Development Dept, Mansfield Tire 

and Rubber Company, Mansfield, Ohio. 
Osborn, John W., I, '02 (D). 
Oscar, Jack P., S, '25 (C). 
Othote, Gilbert A., II, '30 (D). Bliss, Fabyan & Co., 32 Thomas St., New 

York City, N. Y. 
Owers, Mary M., VII, '34 (C). 50 Bedford St., New Bedford, Mass. 

Paine, Howard N., S, '21 (C). Mason 33 High School Road, Hyannis, Mass. 

Pakula, Frank, I, '29 (D). With Butler Mill, New Bedford, Mass. 

Pallatroni, Paul J., I, '25 (D). With Kilburn Mill, New Bedford, Mass. 

Palmer, Myrtland F., I, '13 (D). With Irving Trust Co. (Receivership Divi- 
sion), 233 Broadway, New York City, N. Y. 

Pan, Chen C, III, '16 (C). 

Panek, Ferdinand, IX, '37 (C). My Bread Baking Co., New Bedford, Mass. 

Papademetrius, Demetrius, S, '21 (C). Prop., The Artloom, New Bedford, 
Mass. • 

Papageorge, George, IV, '23 (D). Tester, Scott & Williams, Laconia, N. H. 

Papkin, Nathan, IV, '26 (D). New Bedford, Mass. 

Paradis, Joseph L., Ill, '25 (D). Sales Manager, Ohio Fuel Gas Co., Elyria, 

Parkin, James E., Ill, '36 (D). Chemist, New Bedford Rayon Co., New Bed- 
ford, Mass. 

Parkinson, Charles R., Ill, '36 (D). Student, N. C. State College, Raleigh, 
N. C. 

Patt, Lester D., II, '08 (D). Claim Agent, United States Finishing Com- 
pany, 40 Worth St., New York City, N. Y. 

Payne, James E., II, '30 (D). New Bedford, Mass. 

Pease, Bryden, S, '14 (C). With Hazlip, Hood Cotton Company, Greenville, 

Peavey, Robert F., IX, '28 (C). 160 Broad St., Providence, R. I. 

Peirce, Everett S., Ill, '31 (D). With Cheney Bros., So. Manchester, Conn. 

Peitavino, Americo, I, '29 (D). New Bedford, Mass. 

Perez, Alfonso, S, '23 (C). Owner, St. Pedro Cotton Mill, Octavalo, Ecua- 
dor, S. A. 

Perez, Gonzalo B., I, '30 (D). Manager of a Mill, P. 0. Box 431, Quito, 
Ecuador, S. A. 

Pemelet, Gerard L., S, '30 (C). With Hathaway Machinery Company, Fair- 
haven, Mass. 

Perrier, Gustave D., IV, '30 (D). With The National Silk Co., South Coven- 
try, Conn. 

Perry, Allan M., I, '25 (D). 

Perry, Dorothea S., S, '30 (C). Merchandise Manager, Millinery Dept., 
Lincoln Stores, New Bedford, Mass. 

Perry, Henry J., Jr., Ill, '35 (D). With American Insurance Co., 316 Hunt- 
ington Ave., Boston, Mass. 

Peters, Aubrey R., S, '30 (C). Overseer of Carding, Stormont Mill, Cana- 
dian Cotton, Ltd., Cornwall, Ontario, Canada. 

Peterson, Henry F., Ill, '22 (D). With Amoskeag Mfg. Co., Manchester, 
N. H. 

Phinney, Richard B., IX, '32 (C). With Atlas Tack Co., Fairhaven, Mass. 


Pickard, Walter D., I, '17 (D). 

Pickering, William A., IX, '34 (C). 

Pien, Ting K., I, '22 (C). 

Pierce, Clifton S., I, '29 (D). Director of Testing Laboratory, Abraham & 

Straus, Inc., Brooklyn, N. Y. 
Pilkington, Arthur H., I, '36 (D). With Seminole Mills, Clearwater, S. C. 
Pilkington, James, III, '29 (D). With Clearwater Mfg. Co., Clearwater, 

S. C. 
Pinault, Robert W., Ill, '24 (D). On Technical Staff of Warwick Chemical 

Co., West Warwick, R. I. 
Ponte, John V., IX, '33 (C). 
Poremba, Alfred, II, '31 (D). Designer, Scheuer & Company, 72 Leonard 

St., New York City, N. Y. 
Potel, Jacques M. L., I, '31 (D). Cotton and Cotton Waste Dealer, 9 Rue de 

Sotteville, Rouen, France. 
Potter, Benjamin R., II, '28 (D). Designer, Enro Shirt Co., Louisville, Ky. 
Pressman, Jacob L., I, '24 (D). General Manager, Orkin Exterminating Co., 

Inc., 1128 Elizabeth Ave., Charlotte, N. C. 
Prokuski, Stanley A., I, '30 (D). Overseer, Farr Alpaca Co., Holyoke, Mass. 

Quinn, Francis J., IX, '27 (C). New Bedford, Mass. 

Radway, Charles A., Ill, '28 (D). 103 Commonwealth Ave., Chestnut Hill, 

Ragan, Caldwell, VI, '19 (C). Secretary and Assistant Treasurer, Ragan 
Spinning Company, Gastonia, N. C. 

Ramos, Edwin C, III, '25 (D). Optometrist, Fall River, Mass. 

Ramsbotham, Alan J., Ill, '37 (D). Clearwater Manufacturing Co., Clear- 
water, S. C. 

Ramsbottom, Archie, IV, '24 (D). 

Rankin, William T., VI, '19 (C). Gastonia, N. C. 

Rawcliffe, George A., Ill, '29 (D). Swansea Bleachery, Swansea, Mass. 

Reed, Francis B., Ill, '21 (D). Wareham, Mass. 

Regan, Carlton E., Ill, '28 (C). New Bedford, Mass. 

Remillard, Ernest J., IX, '37 (C). Morse Twist Drill & Machine Co., New 
Bedford, Mass. 

Remington, Allen K., I, '20 (D). With J. & P. Coats (R. I.), Inc., Paw- 
tucket, R. I. 

Reynolds, Philip E., Ill, '34 (D). Morse Twist Drill & Machine Co., New 
Bedford, Mass. 

Richards, Benjamin, VI, '02 (D). Manager, Underwriters' Service Associa- 
tion, 175 West Jackson Blvd., Chicago, 111. 

Richardson, Malcolm H., I, '26 (D). Assistant Instructor, New Bedford 
Textile School, New Bedford, Mass. 

Riding, Richard, S, '01 (C). 

Rigby, Christopher E., Jr., I, '23 (C). With Dupont Rayon Co., Richmond, 

Rigby, James H., VI, '25 (D). DuPont Rayon Company, Philadelphia, Pa. 

Riley, Charles L., Jr., Ill, '37 (D). 

Riley, George V., Ill, '16 (C). Manager, Hotel New Yorker, New York, 
N. Y. 

Riley, Harold F., Ill, '37, (D). Student, N. C. State College, Raleigh, N. C. 

Rioux, Bernard, III, '36 (D). With Glenlyon Yarn Dye Works, Phillipsdale, 
R. I. 

Ripley, Raymond, IX, '34 (C). Machinist, Maxam's Machine Co., Bridge- 
port, Conn. 

Rivero, Richardo J., VI, '04 (D). Monterey, Mexico. 


Robbins, Lloyd B., Ill, '20 (D). Onset, Mass. 

Robenolt, Edward A., II, '11 (D). 23 Sycamore St., New Bedford, Mass. 

Robinson, Arthur J., Ill, '17 (D). In Charge of Sulphuric Acid Plant, Rum- 
ford Company, Rumford, R. I. 

Robinson, Chester A., I, '22 (0). Principal, Belmont, Mass. 

Robinson, Joseph L., S, '23 (C). New Bedford, Mass. 

Robinson, Madeline C, VII, '37 (C). New Bedford, Mass. 

Robinson, Raymond W., I, '26 (D). With L. G. Balfour Company, Ithaca, 
N. Y. 

Rocheleau, M. Violet, II, '35 (D). With Pairpoint Corp., New Bedford, 

Rodalewicz, Henry F., IX, '28 (C). Die Maker, John I. Paulding, Inc., New 
Bedford, Mass. 

Roessle, Alfons U., IX, '33 (C). 2nd Class Fireman, U. S. S. S. New Mexico, 

Ronne, Arthur H., I, '17 (D). Accountant in Yarn Department, Celanese 
Corp. of America, 180 Madison Ave., New York City, N. Y. 

Rooney, Harold E., I, '26 (D). Foreman, Berkshire Manufacturing Com- 
pany, Depot St., Adams, Mass. 

Ross, Edward J., I, '23 (D). 230 St. James Place, Brooklyn, N. Y. 

Rossiter, Laurence E., I, '34 (D). With United Rayon Mills, Fall River, 

Rothkopf, Hyman D., I, '36 (D). 

Rothkop, Max, III, '32 (D). New Bedford, Mass. 

Rowan, Peyton, VI, '20 (C). Cotton Buyer, J. G. Boswell, 524 Roberts 
Building, Los Angeles, Cal. 

Royster, David W., IV, '16 (C). Manager Royster Oil Co., Inc., Shelby, N. C. 

Rubin, Juan D., I, '24 (D). Textile Engineer, Parks-Cramer Co., Fitch- 
burg, Mass. (Territory for Supervision Mexico and South America.) 

Rubinstein, Isaac, III, '27 (D). 410 Ocean Parkway, Brooklyn, N. Y. 

Ruffley, Kenneth, IX, '36 (C). With Hathaway Machinery Co., Fairhaven, 

Ruggles, John W., I, '20 (D). Cotton Twine Manufacturer, 94 Sawyer St., 
New Bedford, Mass. 

Said, Antonio, I, '31 (D). Said & Yarur, La Paz, Bolivia, S. A. 
St. Louis, Adrian, S, '31 (C). Knitter, Ware Woolen Mills, Ware, Mass. 
Salter, Milton B., HI, '19 (C). With Brooklyn Edison Co., Brooklyn, N. Y. 
Salvati, Salvato, I, '20 (D). Delicatessen Shop, New Bedford, Mass. 
Sanders, Stanley G., Ill, '31 (D). With Arkansas & Co., Inc., 233 Broadway, 

New York, N. Y. 
Sayers, William J., I, '23 (D), III, '25 (D). Manchester, N. H. 
Scaccia, Albert N., Ill, '30 (D). With Arkansas Co., 233 Broadway, New 

York City, N. Y. 
Scharf, Elmer, III, '22 (D). Travelling Salesman, L. Sonneborn Sons, Inc., 

New York, N. Y. 
Scheid, Alfred, VI, '11 (C). Bond Salesman, Clarence Hodson & Co., New 

York City, N. Y. (Clinton, Mass.) 
Schiller, Wesley L., I, '23 (D). Assistant to Superintendent, Lebanon Mill 

Co., Pawtucket, R. I. 
Schofield, George L., HI, '28 (D). Superintendent, Ecorse Plant of DuPont 

De Nemours Co., Detroit, Michigan. 
Schofield, Walter, IX, '37 (C). Atlas Tack Co., Fairhaven, Mass. 
Scholze, Ernest A., II, '12 (D). 520 Allen St., New Bedford, Mass. 
Schoop, Hans, S, '22 (C). With Rose Manufacturing Co., Philadelphia, Pa. 
Schulman, Otto, II, '26 (C). Assistant Weaving Manager, Finlayson & Co., 

Tammerfors, Finland. 


Searell, George W., Ill, '22 (D). Sales Service, Jacques Wolf & Co., Chat- 
tanooga, Tenn. 
Searls, Albion K., I, '27 (C). Overseer of Carding, Berkshire Fine Spinning 

Associates, Inc., Adams, Mass. 
Service, Louis B., S, '20 (C). Superintendent, The Gardiner Hall Jr. Co., 

South Wellington, Conn. 
Shanks, James, Jr., Ill, '19 (D). Service Man, Morningstar Nicol, Inc., 630 

West 51st St., New York City, N. Y. 
Shaw, Adam J., I, '30 (D). Boston, Mass. 

Sherman, Charles E., I, '35 (C). With Brookside Mills, Knoxville, Tenn. 
Sherman, Henry F., Ill, '35 (D). With Pontiac Finishing Plant, Pontiac, 

R. I. 
Shill, Alexander, I, '15 (D). Shill Brothers, 463 7th St., New York City, 

N. Y. 
Shoczolek, Walter P., I, '34 (D). New Bedford, Mass. 
Shumway, Orsman A., Ill, '35 (D). Student, N. C. State College, Raleigh, 

N. C. 
Silva, Albert D'A., II, '34 (D). With Gosnold Mills Co., New Bedford, Mass. 
Silva, Americo O., I, '24 (D). Assistant Manager, 11118 Merchandise Mart, 

Chicago, 111. 
Simmons, Charles G., S, '22 (C). Woodworking Teacher, Public Schools, 

New Bedford, Mass. 
Simmons, Gordon J., Ill, '37 (D). Student, N. C. State College, Raleigh, 

N. C. 
Singer, Meyer K., I, '21 (D). With John Campbell Co., Newark, N. J. 
Singleton, Norman, III, '37 (D). Student, N. C. State College, Raleigh, 

N. C. 
Siu, Poy N., I, '23 (C). 5 Lower Castle Road, Hong Kong, China. 
Slom, Benjamin, I, '37 (D). Whitin Machine Works, Whitinsville, Mass. 
Smith, Carlton W., Ill, '11 (D). Clerk, Drift Road, South Westport, Mass. 
Smith, Earle W, I, '37 (D). Post Graduate Work, New Bedford Textile 

School, New Bedford, Mass. 
Smith, George F., Ill, '32 (C). New Bedford, Mass. 
Smith, James C, VI, '23 (C). 
Snedden, George A., VI, '20 (C). Cotton Salesman, William Almy & Co., 

New Bedford, Mass. 
Snell, Elliott A., I, '27 (C). With United Rayon Co., Fall River, Mass. 
Snyder, Arthur E., V, '09 (D). President Berkshire Moccasin Co., Holliston, 

Mass., and Worsted Yarn Salesman, Percy A. Legge, 185 Summer St., 

Boston, Mass. 
Soler, Julius A., I, '28 (D)., Mexico. 

Sotnick, George, IV, '22 (D). Machinery Fixer, Pawtucket Hosiery Com- 
pany, Pawtucket, R. I. 
Soucy, Trefton A., IX, '36 (C). With Metropolitan Life Insurance Co., 

New Bedford, Mass. 
Spare, Arthur F., I, '09 (D). With Spare & Co., New Bedford, Mass. 
Spencer, William A., VI, '04 (D). Superintendent, Trainer Mills of Martel 

Mills, Inc., Chester, Pa. 
Stasiun, Henry F., S, '29 (C). New York City, N. Y. 
Stevens, Bradford T., Ill, '31 (D). Chemist, Wilson Company, Providence, 

R. I. 
Stowell, Edgar D., Ill, '35 (D). Student, N. C. State College, Raleigh, N. C. 
Strahoska, Statia, S, '33 (C). With Nottingham Neckwear Co., New Bed- 
ford, Mass. 
Stubbs, Guy P., '01 (C). Manager of an estate, Munroe, La. 
Sturtevant, Harold B., Ill, '15 (D). Hercules Powder Co., Inc., Drysalters 

Division, Providence, R. I. 


Sullivan, Charles J., Ill, '28 (D). With Pacific Mills, Lawrence, Mass. 

Sullivan, Daniel F., Jr., I, '29 (D). With Firestone Cotton Mills, New Bed- 
ford, Mass. 

Sullivan, Edward H., IX, '33 (C). With Pratt & Whitney, Hartford, Conn. 

Sun, Chiating, I, '25 (D). Textile Engineer, Lu Foong Cotton Mill, Ching- 
chow, Ho-Nan, China. 

Sweeney, Eugene F., I, '22 (D). Head of Quality and Production, Firestone 
Tire & Rubber Co., Fall River and New Bedford, Mass. 

Swenson, Hilary S., Ill, '19 (C). Chemist, Morse Twist Drill & Machine Co., 
New Bedford, Mass. 

Sylvester, Burton C, III, '18 (D). With Farwell Bleachery, Lawrence, Mass. 

Sylvia, Frederick W., I, '34 (D). With Neild Mfg. Corp., New Bedford, 

Szulik, Raymond W., Ill, '36 (D). Student, N. C. State College, Raleigh, 
N. C. 

Szynal, Frank J., I, '35 (D). With Sidney Blumenthal & Co., Shelton, Conn. 

Taber, Dorothy C, S, '32 (C). Office Clerk, N. B. Dry Goods Co., New Bed- 
Ford, Mass. 

Taylor, Charles K., VI, '04 (D). Textile Engineering, P. O. Box 187, Mag- 
nolia, Miss. 

Taylor, Fred, I, '04 (D), American Commissioner of Agriculture, Shang- 
hai, China. 

Terry, Clifford B., VI, '04 (D). Salesman, Foster Machine Co., Westfield, 

Tetrault, Albert H., Jr., I, '35 (D). With National Silk Spinning Co., New 
Bedford, Mass. 

Thayer, Ellis H., V, '07 (D). 

Thomley, Clifton L., I, '22 (D). Shoe Retailer, Walk-Over Shoe Store, 342 
Westminster St., Providence, R. I. 

Tom, George K. Y., I, '25 (D). With Honolulu Advertiser, Honolulu, Hawaii. 

Tomasik, A. Theodore, III, '32 (D). With Revere Copper & Brass, Inc., 
New Bedford, Mass. 

Tourtellot, Pierce D., VI, '13 (C). Agent for Brown & Bigelow, New Bed- 
ford, Mass. 

Tripp, Clifford H., I, '05 (D). Inspector of Textiles, Q. M. C, Boston Gen- 
eral Intermediate Depot, Boston, Mass. 

Tripp, Elbert, III, '37 (D). Post Graduate Work, New Bedford Textile 
School, New Bedford, Mass. 

Tripp, Francis, III, '28 (D). Research Chemist, E. L. Patch Company, 
Stoneham 80, Boston, Mass. 

Tripp, Fred R., Ill, '28 (D). With Mount Hope Finishing Co., North Digh- 
ton, Mass. 

Tripp, Kenneth S., IX, '28 (C). With Morse Twist Drill & Machine Co., 
New Bedford, Mass. 

Trott, George R., I, '24 (C). Clerk, J. & P. Coats (R. I.), Inc., Pawtucket, 
R. I. 

Truesdale, William P., Ill, '24 (D). U. S. Finishing Co., Providence, R. I., 
Silver Springs Branch. 

Tsang, Yiu S., I, '07 (D). Chief Engineer, Consolidated Tax Administra- 
tion, Ministry of Finance, Shanghai, China. 

Tsao, Walter Chih C, I, '25 (D). 

Tsu, Chee L., I, '08 (D). 

Tu, Chung T., I, '22 (D). 

Turbak, Stanley, IX, '34 (C). With Firestone Cotton Mills, New Bedford, 

Turcotte, Telesphore W., IX, '34 (C). Reaming Dept, Morse Twist Drill & 
Machine Co., New Bedford, Mass. 


Turgeon, Roger E., S, '29 (C). With Colonial Silk Mills, New York City, 

N. Y. 
Turnbull, Walter, I, '03 (D). General Agent, Life Insurance Company of 

Virginia, Lawrenceville, Va. 
Turner, Gordon R., I, '28 (D). In testing laboratory, United States Testing 

Co., 1415 Park Ave., Hoboken, N. J. 
Turner, James H., 3rd, III, '22 (D). Chemist, Chemical Co. of America, 46 

Murray St., New York City, N. Y. 
Turner, Lloyd C, IX, '36 (C). With John I. Paulding, Inc., New Bedford, 

Turner, Oswald P., Ill, '29 (D). With American Celluloid Company, New 

York City, N. Y. 
Twardowski, Adolphe J., Ill, '29 (D). 
Tyler, James B., Ill, '32 (C). 

Urquhart, George C, III, '09 (D). Shanghai, China, representative of a 
Boston dye Manufacturing Company. 

Van Dyk, Francis R., II, '21 (C). Vice-president, James Van Dyk Company, 

50 Barclay St., New York City, N. Y. 
Varnum, Albert H., Jr., IX, '34 (C). With Swift & Co., New Bedford, Mass. 

Vera, Frederick J., I, '07 (D). 

Vieira, Nicholas R., Ill, '18 (D). With E. I. duPont de Nemours & Co., 

300 W. First St., Charlotte, N. C. 
Viera, A. Ruth, S, '33 (C). With Wamsutta Mill, New Bedford, Mass. 
Visbal, Luis C, IV, '12 (D). Manager Knitting Department, Espriella & 

Co., Cartegena, Colombia, S. A. 

Waldstein, Benjamin, I, '15 (D). Salesman, S. H. Waldstein, 10 High St., 

Boston, Mass. 
Walker, Stuart B., I, '26 (D). Textile Testing and Analyzing, U. S. Testing 

Co., 1415 Park Ave., Hoboken, N. J. 
Wallner, Siegfried, IV, '19 (C). Representative and lobbyist of a California 

wine firm. 
Wallner, Waldemar, IV, '23 (C). Superintendent, Paul Knitting Mills, Inc., 

Pulaski, Virginia. 
Walne, James A., I, '26 (D). Designer, Taylor Clapp & Beall, 109 Worth 

St., New York City, N. Y. 
Walters, Harold J., IV, '07 (D). Assistant Superintendent, Thomas Develon, 

Jr., A Street and Indiana Ave., Philadelphia, Pa. 
Warburton, Peter, I, '31 (D). Sales Representative, Fiske Bros. Refining 

Co., Newark, N. J. 
Wareing, Clifford S., I, '30 (D). New Bedford, Mass. 
Wareing, Eli W. T., Ill, '27 (D). With United Merchants and Manufac- 
turers, Buenos Aires, Argentina, S. A. 
Waring, Edmund A., HI, '28 (D). With National Spun Silk Co., New Bed- 
ford, Mass. 
Waring, Joseph A., Jr., Ill, '25 (D). Boss Dyer, Van Raalte Hosiery Co., 

Paterson, N. J. 
Waring, Leo J., HI, '25 (D). 
Warner, Raymond C, III, '33 (D). Chemist, Farwell Bleachery, Lawrence, 

Watson, James, Jr., HI, '22 (D). Marion, Mass. 
Watkins, Charles F., Jr., Ill, '21 (D). Superintendent, Norwich Plant of 

U. S. Finishing Co., Norwich, Conn. 
Waxier, Jacob H., I, '21 (D). Insurance and Real Estate, New Bedford, 



Weller, George W., Jr., S, '18 (C). Merchant, Ponemah Building, P. 0. Box 

539, Taftville, Conn. 
Wentworth, Howland, VI, '15 (C). Salesman, Yarn Dept., Celanese Corp. of 

America, New York, N. Y. 
Wheeler, William J., S, '22 (C). Salesman, Tide Water Oil Sales Corp., 

East Providence, R. I. 
White, Clifford L., II, '09 (D). New Bedford, Mass. 

White, Elliott H., Ill, '26 (D). Assistant Chemist, Boston Elevated Rail- 
ways, Dept. of Power, 538 Harrison Ave., Boston, Mass. 
Whitehead, George E., I, '23 (D). Filling Station Manager, New Bedford, 

Whitlow, Samuel A., Jr., Ill, '22 (D). Electrical Engineering, New York 

Edison Company, 130 East 15th St., New York City, N. Y. 
Whitman, L. Clay, II, '22 (D). Washington, R. I. 
Whitney, Howard B., I, '16 (D). George L. Whitney Market, Pawtucket, 

R. I. 
Wilcock, Harry, III, '37 (D). Student, N. C. State College, Raleigh, N. C. 
Wilcox, Roger M. II., S, '10 (C). Life, Accident and Health Insurance, 49 

Federal St., Boston, Mass. 
Wilkinson, Robert A. J., II, '34 (D). Assistant Designer, Gosnold Mill, New 

Bedford, Mass. 
Willey, Eugene L., I, '24 (D). Hope, R. I. 
Williams, Harold H., Ill, '37 (D). Yarn Testing Dept., Security Mills, Inc., 

Newton, Mass. 
Williams, Raymond H., HI, '33 (D). With U. S. Finishing Co., Providence, 

R. I. 

Williamson, Thomas G., VI, '00 (D). 

Williamson, Thomas W., I, '06 (D). New Bedford, Mass. 

Winnell, Lloyd H., Ill, '20 (D). With National Aniline & Chemical Com- 
pany, 40 Rector St., New York City, N. Y. 

Winsper, Samuel F., Jr., S, '29 (C). Superintendent, Seminole Mills, Clear- 
water, S. C. 

Wishnietsky, Benjamin P., Ill, '35 (D). Foreman of Dyehouse, Triangle 
Finishing Co., Johnstown, N. Y. 

Witherbee, Rex G., I, '05 (D). Engineer, Utica, N. Y. 

Wojcicki, Edward, IX, '32 (C). 

Wong, Fook W., I, '18 (D). Manager. Cotton Spinning & Weaving Mill of 
the Kwong-tung Spinning & Weaving Mills, Canton City, Canton, 

Wong, James H. Y., I, '25 (D). Sales Manager and Superintendent, A. B. 
C. Underwear Mill, Office at 193A Nanking Road, Factory at 231 
Connaught Road, Shanghai, China. 

Wong, Ka L., I, '07 (D). Secretary, Salt Gabbell, Shanghai, China. 

Wong, Thomas G., I, '15 (D). General Manager, China A. B. C. Underwear 
Mill and Superintendent, Tung Yih Cotton Mill, Shanghai, China. 

Wood, Theodore, I, '03 (D). Advertising Manager, Bemberg Corp., New 
York, N. Y. 

Woodward, Chester M., I, '24 (D). 

Worden, George, II, '07 (D). New Bedford, Mass. 

Wright, Wilbur A., Ill, '32 (C). With United States Finishing Co., Nor- 
wich, Conn. 

Ybarra, Andrew C, VI, '04 (D). 

Yen, Yuan S., I, '20 (D). c/o Dah Sun Cotton Mill, Nantung Chow, Kiang- 
su, China. 

York, David E., HI, '33 (D). With United States Finishing Co., Providence, 
R. I. 

Young, Edward L., I, '31 (D). 


Young, Frederick J., VI, '04 (D). Manager, Bemis Cotton Mill, Bemis, Tenn. 

Young, James D., I, '26 (D). 

Young, Jun L., I, '25 (D). Teaching, Honolulu, Hawaii. 

Young, Thomas, II, '21 (C). Designer, F. Jacobson & Sons, 1115 Broadway, 
New York, N. Y. 

Young, Tsun S., I, '17 (B). Engineer, Dah Foong Cotton Spinning and 
Weaving Mill, Shanghai, China. 

Young, Yolay, I, '21 (C). Shanghai, China. 

Yozefek, Stanislaw, IX, '33 (C). Machinist, Continental Wood Screw Co., 
New Bedford, Mass. 

Yu, Chao-Ming, I, '29 (D). Dean, The Textile College, Nantung Institute, 
Nantung, Kiangsu, China. 

Yu, Victor H., I, '20 (D). Director of the Dah Lung Cotton Mills, Chang- 
chow, China, and with the Wei Kee & Co., 455 Tientsin Road, Shang- 
hai, China. 

Yuan, Harold H. H., I, '23 (C). Textile Engineer, Nichols Woolen Spinning 
Mill, Tientsin, China. 

Zung, King K., Ill, '20 (C). 


Baldwin, John M., Ill, '14. New Bedford, Mass. 

Bavoux, Roger E., II, '27. 

Bolton, James, VI, '17. Superintendent, Gosnold Mills Co., New Bedford, 

Bolton,. Wright, Jr., Ill, '14. In charge of Rayon Division, Pacific Mills, 

Lawrence, Mass. 
Boudreau, Louis E., VI, '36. Boss changer, Kilburn Mills, New Bedford, 

Bowen, Evan A., VI, '21. New Bedford, Mass. 
Burton, James L., II, '22. New Bedford, Mass. 

Carr, Ernest, II, '29. Designer, Booth Manufacturing Co., New Bedford, 

Carse, Henry G., VI, '21. With Gulf Hill Co., New Bedford, Mass. 

Day, Andrew F., VI, '19. Insurance Agent, First National Bank Building, 

New Bedford, Mass. 
DesMarais, Ernest A., II, '36. Beaming Slasher Tender, Kendall Co., New 

Bedford, Mass. 
Driessen, Frank, VI, '26. New Bedford, Mass. 
Dumas, Leon F., II & VI, '31. Assistant Supt. Whitin Bros., Linwood, 


Flanders, Kenneth A., VI, '20. Agent, Dunn and Bradshaw, Providence, 
R. I. 

Green, Jim, II, '06. Farmer, R. F. D. No. 4, Box 75, So. Dartmoutn, Mass. 
Gumey, Preston S., VI, '19. Overseer, Berkshire Fine Spinning Associates, 
Inc., North Adams, Mass. 

Hagen, John F., VI & II, '16. Textile Engineer, 40 Worth St., New York 
City, N. Y. 

Hammond, Amos E., I, '04. 

Harrop, William H., VI, '30. With New York Mills, Utica, N. Y. 

Holden, Frank, VI, '18. In Charge of Card Room, Reading Cotton Mill, 

Joseph Bancroft & Sons, Reading, Pa. 
Holmes, Philip C., I, '08. Clerk, Grinnell Mfg. Corporation, New Bedford, 



Kelty, Pharus T., VI, '23. Third Hand on Roving Frames, Page Manufac- 
turing Company, New Bedford, Mass. 

Kovar, Paul, II, '29. Draftsman, National Spun Silk Co., New Bedford, 

LaChapelle, Adelard J., II, '07. Designer, New Bedford, Mass. 
Lauzon, Wilfrid P., VI, '34. Spindle Setter, Fiske Rubber Co., New Bed- 
ford, Mass. 

MacPhail, Walter S., II & VI, '30. Cotton Classer, Wamsutta Mills, New 

Bedford, Mass. 
Mellor, John A., II, '16. Designer, Soule Mills, New Bedford, Mass. 
Michaud, Honore, Jr., VI, '34. Third hand on Spoolers, Pierce Bros., Ltd., 

New Bedford, Mass. 

Palmer, John M., Ill, '14. Salesman, Borne, Scrymser Co., New York City, 

N. Y. 
Parker, William E., VI & II, '17. Wefer & Parker, Insurance, Merchants 

National Bank Building, New Bedford, Mass. 
Paull, Norman M., Ill, '16. Civil Mechanical Engineer, 508 Bookstore Bldg., 

New Bedford, Mass. 
Peterson, E. Gilbert, III, '16. New Bedford, Mass. 

Resendes, Manuel A., VI, '23. Third Hand, Kilburn Mill, New Bedford, 

Sharpies, William, Jr., II, '17. With Pacific Mills, Lawrence, Mass. 

Siever, Hughes L., Ill, '12. Southern Sales Manager, Borne, Scrymser Com- 
pany, 17 Battery Place, New York City, N. Y. 

Slater, Edward, VI, '23. 

Slater, Victor O. B., II, '07. Designer, Pierce Mill, New Bedford, Mass. 

Smith, Clifford, II, '34. Warp Changer, Gosnold Mills Co., New Bedford, 

Souza, Gil, VI, '37. Card Room, Kendall Mills, New Bedford, Mass. 

Sylvia, Anthony R., II, '17. Overseer, Gosnold Mill Co., New Bedford, 

Townson, Thomas, III, '29. Merchant, 1513 Acushnet Ave., New Bedford, 

Tripp, Joseph A., VI, '23. Cotton Classer, Kilburn Mill, New Bedford, 

Trojan, Frank, II, '24. Second Hand, National Spun Silk Co., New Bedford, 


Walker, George, VI, '23. Principal, New Bedford Textile School, New Bed- 
ford, Mass. 

Winterbottom, George, VI, '06. 

Publication of this Document approved by the Commission on Administration and Finance. 
500-7-'38. No. 4447. 


New Bedford, Mass. 


I hereby make application for admission to the day classes of the New 
Bedford Textile School. 

Date 193. . 

Name in full 

Date of birth 

Home residence 

Name of parent or guardian 

Name of school last graduated from 

If not a graduate, school last attended 

State in what way you first learned of the school 

Mark X Against Course Desired 

General Cotton Manufacturing Course 

Designing Course 

Chemistry Dyeing and Finishing Course 

Knit Goods Manufacturing Course 

Carding and Spinning Course 

Testing and Fabric Analysis Course 

Mechanical Course 

Rayon Preparation Course 

Special Course in 

The above application should be filled out and mailed or delivered to — 

New Bedford, Mass.