Related Music question-dark

Versions - Different performances of the song by the same artist

Compilations - Other albums which feature this performance of the song

Covers - Performances of a song with the same name by different artists

Song Title	Versions	Compilations	Covers
Jam> Scarlet Begonias>
Althea
Long Black Veil
Tennessee Jed
Fennario (Peggy-O)
Sugaree
Cosmic Charlie
Just Another Whistle Stop>
Jam>
Big Railroad Blues
Feedback> ^Caution (Do Not Stop On Tracks)> ^Feedback>
Cowboy Movie> Mountain Song Chorus> Jam>
Gimme Shelter>
Cryptical Envelopment> The Other One>
Truckin'>
I Know You Rider
Donor Rap/Band Intros
E: Do Right Woman

Notes

^Phil plays Big Brown, *1st time played

Phil Lesh, Chris Robinson (vocals, guitar)
Larry Campbell (guitar, mando,violin, ps, etc)
John Molo (drums), Mookie Siegel (keys)
Barry Sless (guitar+pedalsteel)

Matrix: DSBD and AUD tracks mixed in Sony Vegas by Stitt (oaxacavine@yahoo.com)
DTS:
Track 1 = DSBD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Forward
Track 2 = AUD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Backward
Track 3 = DSBD cutoff at 116kh for LFE (same levels as Tracks 1 & 2)
Surround Master = -2.2 across the board
Mono Channels output at 16/44
DTS encoded with Surcode DVD DTS


More On DTS:

Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and rise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analogue audio outputs of your CD/DVD player.


Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from .flac files.

Make sure you mark this as a DTS CD disc that's not for
playback in an Audio-CD player, as the digital noise will
be at full volume level and speaker damage could result.

There is a DTS decoder for Winamp at
http://files.digital-digest.com/downloads/files/playback/in_dts.zip
I've found it works best when using the DirectSound output