Mxhr^trp xxf Igricnlturi?^ Xltberal Hrfcs M^Eritttolojgg STATION BULLETIN 444 SEPTEMBER 1957 Marketing New England Poultry 1. Characteristics of the Processing Industry By GEORGE B. ROGERS, WILLUM F. HENRY, ALFRED A. BROWN AND EDWIN T. BARDWELL AGRICULTURAL EXPERIMENT STATION UNIVERSITY OF NEW HAMPSHIRE DURHAM, NEW HAMPSHIRE in cooperation with Agricultural Experiment Station, University of Massachusetts and Market Organization and Costs Branch, Marketing Research Division, Agricultural Marketing Service, United States Department of Agriculture. This study is part of a Northeast Regional Project, NEM- 11, A Determination of the Factors Affecting Consumer Acceptance, Costs, and Prices of Poultry Products in the Northeast, a cooperative study involving Agricultural Ex- periment Stations in the Northeast Region and supported in part by regional funds of the United States Department of Agriculture. Preface and Acknowledgements This bulletin is the first in a new series, to be issued by Agricultural Experiment Stations in the New England States, and involving in most instances direct cooperation with the Agricultural Marketing Service, U.S. DA. The series will deal with various aspects of poultry marketing in New England. This publication describes the main features of the processing industry, based upon a complete enumer- ation sample of plants in 24 counties in 4 New England States. The authors are indebted to the more than 200 poultry processing plant operators, contacted by field survey, who furnished the basic information used in the study. They wish especially to acknowl- edge the assistance and critical appraisal received from the Agri- cultural Economics Departments of the Universities of New Hamp- shire and Massachusetts; and from Norris T. Pritchard, Market Organization and Costs Branch, Marketing Research Division, Agri- cultural Marketing Service, United States Department of Agricul- ture, Washington, D. C. Contents SUMMARY 2 I. OBJECTIVES AND METHODS OF STUDY 5 II. AREA AND PLANT SIZE CHARACTERISTICS 7 Description of Sample Areas 7 Summary of Plant Size Characteristics 11 Available Supplies and the Volume of Slaughter in Sample Areas 12 Number of Plants and Plant Size 16 Types of Units 20 Relative Importance of New York Dressed and Eviscerated Poultry 22 Market Classes Slaughtered 23 Supply Sources 25 Market Outlets 26 Seasonality and Storage 28 III. PLANT ORGANIZATION, PRACTICES, AND EQUIPMENT .... 29 Unit Growth and Organization of Firm 29 Buying and Selling Practices 31 Assembly and Delivery Equipment 35 Processing Plant Equipment 36 Plant Operating Practices 40 IV. PRELIMINARY ESTIMATES OF LABOR EFFICIENCY AND PLANT UTILIZATION 43 Labor Efficiency in Small, Medium, and Large Plants 43 Labor Efficiency in Very Small Processing Units 46 Utilization of Plant Capacity 46 V. APPENDIX 49 Marketing New England Poultry 1. Characteristics of the Processing Industry By George B. Rogers, William F. Henry, Alfred A. Brown and Edwin T. Bard well* I. Objectives and Methods of Study 1%/rARKED changes have taken place in the poultry industry in New Eng- ^'-^ land and in the United States since 1940. Technological advances in production, processing and packaging, transportation, and marketing enabled the industry to expand, and contributed immeasurably to alteration of its structure and operations. A steadily decreasing price relative to other foods, increasing consumer incomes, more rapid movement of the product to the retail level, more uniformity of product, and greater convenience and variety offered the shopper have facilitated consumption of the expanded output. In most respects processing has been the most dynamic segment of the New England poultry industry in the post-war era and its influence on other segments has been great. This report, a cooperative study by the Agri- cultural Marketing Service, U.S.D.A., and the New Hampshire and Massa- chusetts Agricultural Experiment Stations, describes processing in various sections of New England and the functions directly associated with the pro- cessing enterprise. Later reports will develop more fully the prospects for more efficient use of resources in all segments of the industry. The recent growth and development of the New England processing in- dustry have been associated with: (1) A relative and absolute decline in long-distance movements of live poultry and in the role of the independent live buyer as a sales outlet for producers; (2) Expansion of large-scale dressing operations at country points and the decline of slaughtering in cities; (3) Increased specialization in certain areas in commercial meat chicken production, larger average size of producing units, and declining numbers of small producing units; *Mr. Rogers is Agricultural Economist, Market Organization and Costs Branch, Marketing Research Division, Agricultural Marketing Service, U.S.D.A., stationed at the University of New Hampshire. Mr. Henry is Agricultural Economist, New Hamp- shire Agricultural Experiment Station. Mr. Brown is Agricultural Economist, Massa- chusetts Agricultural Experiment Station. Mr. Bardwell is Cooperative Agent, New Hampshire and Massachusetts Agricultural Experiment Stations and Agricultural Marketing Service, U.S.D.A., stationed at the University of New Hampshire. (4) Vesting of increased control over volume and practices in the hands of processors, feed companies, hatcheries, and a few large inde- pendent contractors, fewer independent producers, and expansion of producer financing by other than traditional lending agencies; (5) Movement of eviscerating and cut-up operations toward country points and out of wholesale and retail establishments; (6) By-passing of traditional wholesale channels toward a more im- portant role for chain store organizations, packer branches, and direct-to-store delivery by nearby processors; (7) Narrowing of the effective competitive role of the small processor, suggesting greater orientation toward supplying local markets; (8) Increased doubts about the validity of established market price quotations for widespread use. To identify the area and plant size characteristics of the poultry process ing industry, 24 of the 67 counties in New England were selected for study The sample was designed to include areas where production was commercial semi-commercial, and non-commercial in type, and to account for vari ations due to distance from major consuming centers, surplus-deficit status and relative proportions of young and mature birds available for processing Information initially available relative to the numbers and importance of plants of different sizes was inadequate to permit size stratifications. Hence, an effort was made to secure a 100 percent sample of units within the 24 counties to furnish data on this point. Study of a large number of plants was also required to determine degrees and types of integration, extent and reasons for overcapacity, and differences in trading areas, types of sup- pliers and buyers, equipment, practices, and efficiency with various plant sizes. II. Area and Plant Size Characteristics The commercial poultry meat industry in New England is based largely on chicken broilers and fryers. But an ajjpreciable part of the total supply of poultry meat consists of heavier birds, such as fowl, roosters, and roaster- type young birds, as well as turkeys. Some plants concentrate on broilers or fowl, using other classes to supplement supplies of the major item. Since supplies of fowl are more seasonal, plants concentrating on fowl may reach out considerable distances for supplies and/or handle relatively large vol- umes of young chickens. Broiler plants, particularly in commercial areas, may find volume steady and not be interested in processing fowl. Poultry production in New England is not evenly distributed either in type or quantity. The major commercial areas are central Maine, eastern Connecticut, southeastern New Hampshire, and eastern Massachusetts. In the first two areas, commercial meat chicken predominates; in the latter, market and hatching eggs. In most other areas, production is small and scattered. Concentrations of large-sized processors occur in the areas of commercial poultry production, with little or no commercial processing in the areas of light production. The structure of the marketing system in particular areas is altered by the contiguity to or remoteness from major markets. This is principally reflected in the relative importance of the live poultry trade and the degree of distribution by processing plants to jobbing and retail outlets. Areas contiguous to major markets exhibit a large amount of live poultry buying. In remote areas, if commercial, birds are likely to be processed for distant markets; and if the area is non-commercial, a substantial share of the small volume may be processed by small local units and absorbed by local con- sumer demand. Both consumer demand and market demand in relation to production affect the marketing system. One aspect of demand and supply involves the quantity consumed in the area. On this basis it is evident that remote commercial areas will be surplus and contiguous non-commercial areas will be deficit. Other areas will be either surplus or deficit depending on the quantities needed for consum.ption and actually produced. Deficit areas will tend to prepare poultry for local use; surplus areas for shipment to more distant markets. A second aspect of demand and supply involves the processing capacity and/or the live buying capacity in the area. These provide a more direct and effective demand for local birds than does con- sumer demand. In many cases they are not derived to any great extent from the local consumer demand, especially in areas removed from the main markets. Description of Sample Areas For summary purposes, the 24 counties surveyed were consolidated into 6 areas on the basis of degree of commercialization of production, distance from major markets, surplus-deficit status, and ratio of broilers to farm chickens.* 'For data applicable to individual counties see Appendix Table II. 7 Area 1 Although Aroostook County, Maine, and Coos County. New Hampshire, are widely separated they are essentially alike with respect to poultry pro- duction and processing. The main agricultural enterprises are potatoes in Aroostook County and dairying in Coos County. Poultry production is relatively unimportant. Hence, these counties are non-commercial in poultry production, and processing is performed largely to supply local markets. Both counties are remote from major consuming centers; both are deficit in poultry meat. The limited amount of poultry meat produced comes almost entirely from the sale of cull fowl and young chickens raised in conjunction with laying flock replacement programs. Poultry moves southward out of these counties in live form via live buyers and processing plant collection, and into these counties in processed form. In these two counties, slaughter is about a fourth of the small volume available. All processors of chickens in Area 1 have very small volumes. Many are either producer-processors or former producers engaged in limited processing. Area 2 Androscoggin, Kennebec, Knox. Lincoln, Sagadahoc, and Waldo counties of Maine contain most of the large processing plants in the state, among which are several of the newest and largest in New England. This area, plus portions of adjacent counties account for most of Maine's production of commercial meat chickens. Several of these counties are also important in egg production and are important sources of fowl and related market classes. Poultry production is of major importance in the agriculture of the area. This area is highly commercialized, and heavily surplus. Since it is remote from major consuming areas, the large processing industry is or- ganized for supplying distant volume outlets. Commercial meat chickens are much more important than fowl and other "farm chickens". The A'olume of poultry produced and processed in central Maine has in- creased substantially in recent years. Significant shifts in industry practices have occurred I Table 1 ) . Central Maine, among the commercial and semi- commercial groupings, has moved relatively further toward an eviscerated product than other areas. This trend is continuing and is also proceeding rapidly in other areas of New England. The largest Maine plants, and most of the large plants in other areas, are concentrating more and more on broilers and fryers and other young chickens. Contract growing has ex- panded rapidly in most areas where commercial meat chickens are important. In Maine this has appeared almost entirely as direct contracting by the processing firms (or their affiliates). In other areas, processing firms have done less direct contracting, though contract growing and various financial arrangements between feed companies, hatcheries, and other agents, and growers are in widespread use. Slaughter in central Maine plants exceeds the volume available in the sample counties. The larger plants in this territory have many growers in the adjacent counties of Penobscot, Hancock, Piscataquis, Somerset. Franklin, Oxford, and Cumberland. Area 3 Belknap, Hillsboro, Merrimack, Rockingham, and Strafford counties in south- eastern New Hampshire contain all of the sizable processing plants in the state. Poultry production is about equally important with dairying. This Table 1. Central Maine: Changes in Selected Practices 1951 to 1955-56 Feature 1951 1955-56 % of Sales in N. Y. Dressed Form 95 35 % of Slaughter, by Market Classes: Broilers Fowl Chickens 87 12 1 79 6* 15t % of Supplies from Contract Growers 62 92 Location of Market Outlets, % Distributiont New York and Connecticut 71 Massachusetts 17 Maine 9 Types of Buyers, % of Volume Commission men and wholesale receivers 91 Over 200 Mi. 47 100-200 Mi. 43 50-100 Mi. 9 Under 50 Mi. 1 Wholesalers 81 Chain Ware- houses and packer branches 19 * Fowl and roosters. t Heavy young chickens. ? Intervals associated with state lines and distances from plant not strictly comparable. area accounts for the bulk of the state's market and hatching egg flocks. Interspersed is a substantial output of commercial meat chickens. Hence, this area is important in the production and processing of fowl and related classes, with commercial meat chickens a supplementary contribution to plant volume. While Rockingham and Hillsboro counties are moderately com- mercialized, the other three counties are semi-commercial; thus, in total the area can best be described as semi-commercial and surplus. It is inter- mediate in distance from major consuming areas. This area processes more fowl than any other in New England. Sales to volume outlets in markets outside the area are stressed. It is still an important territory for live buyers. Plants in southeastern New Hampshire and in eastern and central Massa- chusetts compete for poultry across their respective state lines and in some instances in portions of Vermont and southern Maine. Maine, New Hamp- shire, and Massachusetts are important suppliers of live poultry for the Boston market and live poultry from these states also moves to the New York City area. In balance, there is a net out-movement of live poultry from Areas 3 and 4. Area 4 The Bristol, Middlesex, Norfolk, Plymouth, and Worcester county area in Massachusetts is a heavily populated and industrialized section. The area is, in total, heavily deficit and contains large consuming centers. Yet agri- culture is important in these counties and poultry production shares major importance with dairying. The area is important in market and hatching egg production. Commercial meat chickens are relatively more important to processing plant volume than in southeastern New Hampshire. The area can best be described as moderately commercialized. It contains most of the large processing plants in the state plus a substantial share of the medium-sized and small units. Because of the proximity to major consum- ing centers, considerable stress is placed on direct distribution to retail and jobbing outlets. It is still an important territory for live buyers. Area 5 New London, Tolland, and Windham counties in eastern Connecticut con- tain most of the state's commercial meat chicken production plus a sub- stantial share of the output of fowl and related classes derived from market and hatching egg flocks. Commercial meat chickens are of major importance, though fowl and related market classes are relatively more important to processing plant volume than in the central Maine area. Most of the larger processing plants in the state are in this area. As is true in Central Maine, small plants are unimportant. Poultry production exceeds dairying in im- portance. These counties are highly commercialized and heavily surplus. They are intermediate in distance from major consuming areas. Some stress is placed on direct distribution to retail and jobing outlets, but not to the same degree as in eastern and southeastern Massachusetts. In the commercial area of eastern Connecticut slaughter is substantially less than the volume available for slaughter. This area still supplies an important volume of live poultry to the New York City area. In 1948, the volum.e of live poultry from Connecticut sold through the New York City Live Poultry Terminal was 26.1 million pounds. In that year, Connecticut supplied more live poultry to New York than any other state. The volume of live poultry now being supplied by Connecticut pro- ducers to the New York market is not known, but it is believed that their locational advantage has enabled them to maintain their competitive posi- tion on the live market.* In 1948, the seven leading states supplying live poultry to New York were Connecticut, New York, Delaware, Pennsylvania, New Jersey, Massa- chusetts, and Maine. t In 1950. Metropolitan New York was the single largest market for Connecticut live poultry, with 47 percent of the total being shipped there. Connecticut markets were second with 36 percent, Massachusetts third with 16 percent, and Rhode Island least important with one percent. $ * Morrison, T. C. Relation of the Chicken Meat Industry in Connecticut to the N. Y. City Market for Dressed and Live Poultry. University of Conn. Extension Ser- vice Leaflet 47, August 1953, p. 5-6. t Zwick, C. J. and R. A. King, Competitive Position of the Connecticut Poultry Industry: 5. The Economic Advantage of Location in Marketing Live Poultry. Storrs Agricultural Experiment Station Bulletin 293. September 1952, p. 5. $ Zwick, C. J. and R. A. King, Markets and Marketing Facilities for Connecticut Live Poultry, Storrs Agricultural Experiment Station, Inf-19. October 1950, p. 7. 10 Area 6 The Hartford-Springfield area, which in this study consists of Hampden County, Massachusetts, and Litchfield and Hartford counties, Connecticut, is heavily populated and industrialized. It is contiguous, though only slightly deficit. Because of the large volume of commercial meat chickens produced in Hampden County the area is about self-sufficient in these classes, and only slightly deficit in the production of fowl and related market classes. Dairying is of equal importance with poultry production. Hampden County is commercial; Hartford County semi-commercial; Litch- field County non-commercial; on balance the sample area can best be de- scribed as semi-commercial. The area is able to draw upon supplies from eastern Connecticut as well as on certain other nearby counties of Con- necticut and Massachusetts. The area contains a few large and medium- sized plants and many small plants. Slaughter in this area greatly exceeds the volume produced within its boundaries. Siimniary of Plant Size Characteristics Many features of the poultry processing industry in New England are more clearly associated with unit size than with location. Others are ex- plained in part by each. All processors are competitive in the sense that they share in the total supply of, and consumer demand, for poultry. Yet the direct and effective competition between very large and very small plants in a given area may be limited. These extremes procure birds from different sources and market them through different outlets. From the lower to the higher extremity, there is likely to be a gradual but irregular tran- sition in characteristics and in the degree of direct competition. Included among the tools of competition, in addition to basic prices, are services, and a whole group of intangibles, such as, objective and subjective meas- ures of quality, personal contacts, and social groupings. The several forms of integration which occur in the industry are related to either plant size or the evolution of the individual firm. These may be defined as follows: A. Horizontal, processing. Several plants operated by one formal struc- ture of management. B. Horizontal, multiple-commodity. Poultry, eggs, and other items pro- duced and/or handled by the same unit at the same level in market- ing channels. C. Vertical or multiple-function. Growing, assembling, processing, dis- tributing, feed mixing and sales, equipment and supplies sales, and financing handled by one formal or informal management group. In New England horizontal integration in processing is almost totally absent. Informal arrangements, based on family ties or common sources of financing, may exist. These are likely to involve medium or large-sized units. Many smaller units handle eggs, particularly when jobbing or retailing is involved. Some of the large cooperative processors originated as handlers of eggs and/or live poultry, with the poultry processing operations succeed- ing the handling of live birds. Many small processors are engaged in growing and in retail distributing. Many large processors engage in breeding, hatching, financing, contract 11 growing, and/or handling feed and supplies. Contract growing may he carried out directly by processors or by secondary contractors under work- ing arrangements. The movement of processing toward the country, and the accompanying de-emphasis on the long-distance movement of live poultry, have resulted in excess plant capacity in or near major markets. Many units, particularly in the very small, small, and medium-sized groups, and plants specializing in fowl, still experience considerable seasonal variations in volume. In com- mercial areas, where volume is concentrated in relatively few hands, over- capacity occurs as an element of monopolistic competition.* Smaller processing units tend to concentrate buying and selling activities within a smaller radius from the processing plant, with larger units reach- ing farther for the residual share of supplies and serving more distant markets. Smaller processing units are also likely to deal with smaller pro- ducing and purchasing units, suggesting in the latter instances a substantial degree of retail distributing. With the types of processing equipment currently available, mosi: smaller units operate without overhead conveyor lines. When this occurs, a series of hand operations is required in scalding, picking, etc. Larger units, whose volume justifies overhead lines and automatic equipment, are able to elimi- nate much hand labor. Substitution of equipment for labor will increase the output per man hour as plant size increases. Because of less variation in volume, larger plants can readily operate at a higher percentage of theoretical capacity. This may appear as a rather sharp rate of increase in part because smaller operators may elect to devote a share of given resources to assembling and retail distribution if they maximize total returns. Table 2 summarizes some of the salient features of poultry slaughtering plants of various sizes contacted by field survey in 24 New England coun- ties. Details related to many of these points are presented in subsequent pages. Available Supplies and the Volume of Slaughter in Sample Areas The volume of chicken? a\ailable for slaughter in the sample areas in 1955 was about 74 percent of the New England total. Slaughter by units contacted was about 70 percent of New England production. Data on chickens available for slaughter by areas were obtained by apportioning AMS state data on broilers produced and chickens sold on the basis of 1954 Census numbers by counties. The low correlation between county volume of slaughter and supplies available can be largely explained by the following: A. Inadequacy of the county as an economic unit, especially as a supply area. B. Variations due to under-enumeration, particularly of small slaughter- ing units. *This term is used in the sense that Chamherlin does to define a situation where a number of firms share the market for (or supply of) a particular product but "each is in some measure isolated, so that the whole is not a single large market of many (firms), but a network of many markets, one for each (firm)." The Theory of Mono- polistic Competition, Harvard University Press. This concept is appropriate for the poultry meat industry because firms are relatively few and have special relationships with producers due to location, procurement, and contract provisions; yet competition for supplies and outlets is rather vigorous. 12 u • 0 0 0 b 0 u w -< en V h V j: 0 es ^ S 0^ -2'S o 3 S o^ C^O 3 ro 3 \0 'J'J -^ i; " 3 o q13 2 o ° 2 T* f/i C/) --- ^^ «H M 3 3 ^^ r^ ^ .— — ' r; rt fJ t-M Cj t-M .^ -^ 3 c a. Co ^ " a o '-*-4 "^ O O OJ aj U2 ti -r c« ca -^ O o u 3 ""3 01 V CJ n3 1) '1 0 fr:-o bC ^^ If 3 g g a^ O i: r; OJ ^ -3^ ;r 3 o c o c .-1^3 cB (j3 03 ca j^ji;; i3c 2"^ ••'^ i'^J ^ . aj . 55 ' £W-^W_3 0) ^■^ ca ^ o t- o '^ ca •- 3 (c tn ca nj !^^ "-I o >> 2 a "-• tn O 3 bl) „^ O it CLi c oj 3 _o 2 "^ CD ^Z ^ 3. § « ® 3 «, 2 ca »-t fli TT 3 aj^ ca o ca o so 3 ca ca E r^ <« ■^ tc 0 Cfi 10 D aj I— 1 > J - — • CD o CO 43 o > oj .2 icke; ers. 3 ca ^3 ^^ "^ »H ^ ca CJ ca 0) 3 <« a 1-4 S ca 0 a ON 0 0 r— t la 0 10 E csi ■^ — ' o 3 1^ I — I o eft CO t^ ca i! O c« eft in W C eft ed O _ ^ „ c cc/) ra 2 2 „ffi 4^ eft tH Q, 773 >- O c 9 a 1) ra.^.g £z ca bC 3 8 O a i2 o -3 vP 0) _3 eft >-• (u aj eft J^ 3 o O rt . cs eft £2 eg ca J= - - - VO eft o -3 a OS CO -T3 ^ 3 eft -- O -3 eft a ca o ♦-.^. = 3 3 c/j ca eft " ca >-|-i i) eft tn a ^ !r ® oi > 2 ^- S- ^ ! cS--i:.S £2; c« caW ti 3. fx^ 3f^ =" o ca — CD "en C/j CJ CJ 3; tc (U N eft eo s 0 eft 3 eft OJ -3 0 1) 0 S a -d ca 4) r- »-^ U. eft C 0 -3 .S.HK 3 CO F< bb eft ^ h! C8 ca - 3 ^" -CJ 4J . 3 td .« W 3 uwcnincD CJ .Sti a OjCD eft ~Xi eo )-< 0 en to ID > 3 0 T3 3 ca o , ers of different types of processing units. Near larger cities, as well as in non-commercial areas and in areas where egg production is important, many producers slaughter for the local retail and jobbing trade. In highly- commercialized and surplus regions like Areas 2 and 5, where commercial meat chickens dominate the supply picture, producer-processors were rela- tively fewer in number than in certain other areas. In Area 1, which is lemote and non-commercial, most processors were either producers or former producers engaged in small-scale processing. In Areas 4 and 6, where resi- dent populations are large, many producers seek to take advantage of the excellent opportunities for retail selling. In these areas, as in Area 3, as previously noted, many of these producer-processors are seeking retail out- lets for cull fowl and heavier classes of chickens, primarily from egg enterprises. Poultry and egg stores, and to some extent live buyers, cater to the Kosher trade and to other ethnic groups wishing to purchase or select live birds at the point of slaughter. These types of processors tend to be most numerous in heavily-populated areas. Urbanization, zoning, and changing consumer habits have contributed to a decline in the number of poultry and egg stores which slaughter. The effects of zoning are particularly evi- dent in towns near Boston. Many of the remaining units still eviscerate on the premises. Included in the "other" category in Table 5 are live buyers, locker plants, retail food stores, restaurants, and custom processors who slaughter and/or eviscerate. Not included are many specialized poultry stores in retail shopping centers and a large number of stands and restaurants preparing birds for sale in cut-up, barbecued, or cooked form. The "processor" group includes a dwindling number of city establish- ments which supply slaughtered and/or eviscerated poultry to poultry and egg stores (Kosher and non-Kosher) and other types of enterprises which are oriented toward retail selling. Also included aie various sizes of country plants. Of the 204 slaughtering establishments contacted during the survey, 152 were producers, poultry and egg stores, or "other" types. These plants handled only 2 percent of the total volume handled by all plants. While secondary data indicate the survey under-enumerated such units, the ad- justed data in Appendix Table III indicate that 217 sucii units out of a total of 269 (or 81 percent) probably handle less than 3 percent of total volume slaughtered in the sample areas. Thus, the 52 establishments classi- fied as primarily processors would account for more than 97 percent of slaughter. 20 -a X CD e > s *^ h 0 o h s cs H >-. us •8 V V a s o 6t C s IT! CS H CAl c O lU o c i« d M V4H O 03 0) o. O CO >^ 4J H O O 0. cs r- C ^H Oh M >-. t^ D -T3 o o Oh C c^ bU 3 ta o •xi o a '33 3 c CO >. ^ S 3 2 ^1 to to IH o o fin '^ cfl 3 O c" o U ca CT\ -t— fO O rH t~^ \o f— I O CM O I— I O r-~; CO C-J rH ^ \q i-H ON cc Lo 1^ cm' C<\ Os Os 0\ 0\ Os ■i— \n OS c<\ O r-< O" l-H p O CO \o O r— i r-H O CM 1— I CO 'Tf 00 CM ■* CM O lO CO VO VO O I— I Tf VO 'O ON CM 1— I O LO CO CM CO rH 1— I r-H I— I CM CO ON r-l ON (N O 1— I r— I ■^ UO CM LO I— I CM CO ^ LO vo ON 00 o o CM CM CM LO SO LO o CM ca o o . C 3 ca ^ ^ to m ^ ►J 21 Further examination of the data in Table 5 and Apj^endix Table III suggests that only in non-commercial areas, where producer-processors dominate, and in heavily-populated areas, where producers, poultry and egg stores, and "other" types are numerous, would the role of processors be noticeably lessened. However, in Areas 4 and 6, which meet the latter conditions, the proportion of slaughter accounted for by such groups would not reach 8 percent in either area. Relative Importance of New York Dressed and Eviscerated Poultry Out of a total of 204 units contacted which slaughter poultry, 147, or over 70 percent, also eviscerate. Of the latter, some also cut up poultry. In total, however, only 37 percent or 110 million pounds of their volume of slaughter is further processed into eviscerated and/or cut-up form. A higher percentage of units in Areas 1, 2, 5, and 6 eviscerate than in Areas 3 and 4. Evisceration by 20 non-slaughtering units, some of which handle poultry from outside New England, totaled only 7.0 million pounds, dressed weight basis. Of 110 million pounds of chicken eviscerated in slaughtering units, about two-thirds was done in Area 2 plants. Thus, 64 percent of the Area 2 slaughter was eviscerated in the same plants, compared with 86 percent in Area 1, 20-30 percent in Areas 4, 5, and 6, and only 3 percent in Area 3. This indicates that the commercial areas of Maine have moved closer to full country evisceration than other areas where slaughter is substantial (Table 6). Central Maine's large plants eviscerated a higher percentage of Table 6. Slaughter and Evisceration: Relative Importance by Areas and Plant Size Percent of Slaughter Percent Percent Annual Eviscerated by of Total of Total Area Slaughter* (1,000 Pounds) Same Plants Slaughter Evisceration 1 263 86 t t 2 115,527 64 40 67 3 32,533 3 11 1 4 44,912 20 15 8 5 64,532 23 22 14 6 35,842 30 12 10 Size Group Very small 5,717 64 2 3 Small 8,108 12 3 1 Medium 37,297 25 13 9 Large 242,487 39 82 87 Total 293,609 37 100 100 * Live weight. t Less than 1%. 22 their slaughter than large plants in other areas. Very small units in all areas are likely to eviscerate a higher percentage of their volume than small or medium-sized plants. Where slaughter of fowl is particularly important, as in very small to medium-sized plants in central Maine, Massachusetts, and in all plants in southeastern New Hampshire, the proportion eviscerated is significantly lower than where broiler and fryers and heavy young chickens are of major importance. Conclusions reached by classifying slaughtering plant data according to unit size, are roughly paralleled by grouping data from separate .eviscerating operations by unit size. The 16 smallest units accounted for 6 percent of the volume, the 5 units in the middle group for 20 percent, and the 3 largest units for 74 percent. Broilers and fryers tended to increase in importance with plant size; other classes combined, to decrease. Market Classes Slaughtered Areas 2 and 5 combined accounted for almost 70 percent of the aggre- gate slaughter of broilers and fryers in the six areas studied. Area 2 ac- counted for almost half of the heavy young chickens. Area 3 accounted for a third, and Areas 2, 4, and 5 for 17-20 percent each of the fowl and roosters slaughtered. Broilers and fryers were the major market class slaughtered in all areas except 1 and 3. In Area 1 slaughter of broilers and fryers was negligible with fowl and roosters the main class at 76 percent of the slaughter. Jn Area 3, also, fowl and roosters were the main class, accounting for 49 percent of the slaughter; broilers and fryers were of second importance at 40 percent. About 80 percent of slaughter in Areas 2 and 5 consisted of broilers and fryers, with heavy young chickens second in importance (at 14 percent) in Area 2 and fowl and roosters (at 14 percent) in Area 5. Fowl and roosters were also relatively more important than heavy young chickens in Area 4. On the average, almost 30 percent of the slaughter of smaller units con- sists of heavy birds, such as fowl, roosters, roasters, caponettes, capons, and pullets. Through such concentration, smaller plants are able to offset in part through poundage the advantage of larger plants with respect to the number of head handled per man hour. Except in areas where market and hatching egg production are the major poultry enterprises, medium-sized and large plants tend to specialize on broilers and fryers. Many larger plants do not want fowl and related classes of poultry. They frequently con- fine slaughter of such poultry to their own supply flocks, working these in one day a week, and are inclined to discount prices on additional offerings. The proportion of slaughter of broilers and fryers increased with plant size, and the proportion of heavy young chickens declined. Slaughter of fowl and roosters constituted a substantially larger share of the slaughter of very small, small, and medium-sized plants than was true for large plants. The major item slaughtered by very small units in Areas 1 and 2 was fowl and roosters; heavy young chickens in Areas 4, 5, and 6; broilers and fryers in Area 3. Small units slaughtered relatively more fowl and roosters than other classes in Areas 2 and 3; heavy young chickens in Area 4; and broilers and fryers in Area 6. Broilers and fryers were the major class slaughtered by medium-sized and by large plants in all areas except 3. In Area 3, in total, fowl were of equal importance with broilers and fryers, though each was the major item for certain plants. 23 S3 1) O a > V u iS .5 O N S C8 -3 j« o o OS 4) be C (fi CS 3 C O 4J bC 1/ >--^ bC < (•^H o .J_, c VO CO \o o o VO VO On tS" to ■* CM r—, CNq CSI O r-l »* CO 1— I r^ I CN) rO "Tf iC VO o CSl CM C^J rt I' CM CM VO I- .2 "5 c7i p ^ * s ^ — .5 a^ CO ^"^-o ?'- E > C/-J ^ h4 1 o ^ c CO 24 Supply Sources Direct contracting arrangements account for 90 percent of volume slaughtered by central Maine plants. Direct contracting is also significant in Areas 4 and 5, Contractors (other than processing plants) play an im- portant role in Areas 3, 4, and 6, on the basis of data shown. However, the data shown under "contractors" (Table 8) do not provide an inclusive Table 8. Supply Sources: Percentage Distribution of Slaughtered Output Independent Raised Contracted Contractors Producers Area Live Buyers Total 1 2 3 4 5 6 79 — . — 21 — 100 « 90 2 8 * 100 2 * 12 59 27 100 1 21 25 45 8 100 * 8 3 87 2 100 2 — 32 63 3 100 Total 40 11 43 100 Plant Size Very small 35 — — 46 19 100 Small 7 4 2 66 21 100 Medium — 14 21 63 2 100 Large — 47 9 39 5 100 Total 40 11 43 100 * Less than 1%. measure of the true importance of feed companies, hatcheries, and large independent contractors in the supply picture. Much of the volume which they control is included under the "independent producer"' column, because the processor tended to answer the question with only direct contracting between himself and the producer in mind. Live buyers are important in fowl procurement, in supplying poultry and egg stores, and to some extent as agents for processors in heavily populated areas. Plants which buy dressed poultry for eviscerating and cutting up obtain practically all of their supplies from slaughterers. Many very small slaughtering plants are associated with farming enter- prises, the processing unit converting the producer's own birds to dressed or eviscerated form for local sale. Other very small and small plants, pri- marily poultry and egg stores or roadside establishments, are heavily de- pendent on small lots obtained from independent producers and live buyers. Some small plants obtain a few lots from contractors or have an occasional flock grown on contract. With the medium and large slaughtering plants, contract growing is an increasingly important source of plant volume. Medium-sized plants rely inore heavily on secondary contractors than on direct contract growing. 25 As previously noted, much of the volume of medium-sized and large plants listed under the "independent producer" category is in reality grown under some contractual or financial arrangement between producers and secondary contractors. Live buyers are of minor importance to these size groups and are largely concerned with assembly of fowl and heavy young chickens. In Areas 2 and 5, which lead in the production of commercial meat chickens, and in Area 4, where direct contracting by processors and second- ary contractors is important, even on the basis of incomplete data, plants are able to procure about half their supplies within 25 miles of the plant, and another 25 percent within 25-50 miles. In contrast, the proportions are roughly reversed for Areas 3 and 6, the former concentrating on fowl, which tend to be scattered over a wide area, and the latter drawing heavily from eastern Connecticut. In some instances, the more distant figures may include live buyer operations known to the processing plant operator. As plant size increases, so does the size of the supply area. (Table 9). Table 9. Supply Areas: Percentage of Volume Obtained Within Specified Distances from Slaughtering Plants Area* Distance 0-25 25-50 Miles Miles 80 20 53 29 21 62 55 27 48 23 23 56 50-100 Over 100 Miles Miles Tola 100 17 1 100 15 2 100 17 1 100 22 7 100 — 21 100 1 2 3 4 5 6 Plant Size No. of Plants Very smallt — 80 12 8t — 100 Small 20 71 19 8 2 100 Medium 12 47 37 15 1 100 Large 13 45 33 17 5 100 * Based on data for small, medium and large plants. t Data not collected on all plants in this group. Estimated from a sub-sample. + Over 50 miles. Market Outlets Data on market outlets of processing units are influenced by the propor- tions of plants of different sizes. Very small units in all areas tend to deal directly with consumers and, secondarily, with stores, restaurants, hotels, camps, and institutions. In heavily populated areas, larger units have begun direct-store distribution on a significant scale. Area 3, which specializes in fowl, moves most of its volume through wholesale receivers. Chain store or- ganizations and packer branches are important outlets for plants in Areas 2, 4, 5, and 6, taking 20-28 percent of the output. Plants in Areas 3, 4, 5, 26 and 6 sell 3-11 percent of their volume to jobbers and hotel and institu- tional supply houses. Central Maine, because of its volume and location, sells 80 percent of its output through wholesale receivers. Very small slaughtering plants sell more than three-fifths of their volume directly to consumers and almost one-third additional to stores, restaurants, hotels, camps, and institutions. Store business is equally important to small plants, but on the remainder of the volume emphasis shifts away from sales to consumers and toward wholesale-type buyers. A continued shift toward wholesale receivers occurs with medium and large plants. Medium-sized plants tend to stress direct-store deliveries as the second most important outlet; large plants stress chain store organizations and packer branches. This difference is due at least in part to location of the medium-sized plants. Table 10. Types of Buyers: Percentage Distribution of Slaughtered Output Stores, Other Other Jobbing Wholesale Wholesale Area Consumers Outlets* Receivers Outletst Total 1 26 74 100 2 t t 80 20 . 100 3 1 9 79 11 100 4 2 28 39 31 100 5 3 7 58 32 100 6 6 8 55 31 100 Plant Size Very small 63 31 3 3 100 Small 5 31 — 24 100 Medium 4 20 67 9 100 Large — 5 68 27 100 Total 2 8 66 24 100 * Restaurants, hotels, camps, institutions. t Chain warehouses, packer branches, jobbers, hotel and institutional supply houses, canners, eviscerating plants. t Less than 1%. Central Maine's volume moves more heavily to distant buyers (90 percent — 100 miles and over) than any other area studied. Next, with 44 percent, comes Area 3 (southeastern New Hampshire), where fowl is shipped out in quantity to distant points. Eastern Connecticut moves two-thirds of its output more than 50 miles, but only 21 percent more than 100 miles. Area 6 finds markets for 44 percent of its output within 50 miles of plants and for about all of the remainder within 100 miles. Areas 1 and 4 are able to place most of their volume within 50 miles. Data indicate a trend toward more distant outlets as plant size increases. 27 Table 11. Distribution Areas: Percentage of Sales to Buyers Within Specified Distances from Slaughtering Plants - Distance 0-25 25-50 50-100 100-200 Over 200 Area** Miles Miles Miles Miles Miles Total 1 40 55 5 — 100 2 * * 9 43 47 100 3 8 37 11 8 36 100 4 52 31 3 14 — 100 5 8 25 46 17 4 100 6 23 21 55 1 — 100 Plant Size No. of Plants Verv Small^ 82 15 3t — 100 Small 20 61 33 5 1 — 100 Medium 12 18 45 6 13 18 100 Large 14 8 9 22 31 30 100 * Less than 1%. ** Based on data for small, medium, and large plants. t Data not collected on all plants in this group. Estimated from a sub-sample. J Over 50 miles. Seasonality and Storage Seasonal variations in individual plant operations may occur either from the influence of changes in supplies or the demands of the market outlets serviced. Slaughter of fowl exhibits greater seasonal variation than slaughter of broilers. Year-round commercial meat chicken production and contract growing minimize seasonal fluctuations in broiler supplies. Of 17 large and medium-sized plants, only two indicated broiler slaughter varied sea- sonally. Neither was engaged in contract growing. Only 4 of 8 small plants indicated broiler slaughter as steady, but many small plants are more in- fluenced by local retail trade demands than by overall supplies. Only 15 of 44 plants stored poultry for their own account. Four of these indicated quantities were negligible and storage was not a regular prac- tice. Birds were not likely to be held beyond six months. Fowl was the most likely market class to be stored. Four of the plants that stored poultry produced one-pound Rock-Cornish birds and marketed their products nationally. A large proportion of these birds is sold frozen and stored in warehouses throughout the country for quick delivery. It was indicated, however, that if possible, inventories were turned over each month. 28 III. Plant Organization, Practices, and Equipment Unit Growth and Organization of Firm No significant relationship exists between the type of business organization and length of time in business or the area in which located. More medium-sized and large plants than small plants are incorporated. Indeed, with many of the two former groups, the processing unit may be only one of several units involved in a corporation; the others dealing with hatching, growing, contract growing, distributing, milling, etc. Of 13 large plants, 11 indicated that the present management had begun processing operations in the post-World War II period. They started either as medium-sized or large. The two other units presently classified as large both started as small hand operations. Some other large units were oper- ating earlier under different management, and perhaps on a smaller scale. Of 30 small and medium-sized plants, 11 started prior to World War II and 17 after 1946. Again, some of the post-war starts may represent forma- tion of new managerial arrangements to accommodate veterans and family members joining the firm. Only three firms — one in each size category — indicated the present management had begun processing during World War II. Four small plants, one medium-sized plant, and two large plants reported no supplementary functions. Supplementary functions are activities of a plant other than assembling live birds, processing, and distributing pro- cessed birds, and are measures of integration. Five small plants were, or recently had been, primarily growers, and pro- duced many of the birds they processed. The five large processors carrying on growing operations limited these to certain classes (turkeys) which did not constitute a large share of plant volume, to breeding and experimental flocks, and to a few plant-owned broiler farms. In no case was the growing operation of the large unit a major contributor of plant volume. The mere counting of functions can be misleading. In terms of the present shares of plant volume, contract growing is of negligible importance to medium-sized plants, but of considerable importance to large plants. Dis- tribution of live poultry is still carried out to some extent by processing units. To some of the smaller plants, this volume may be important and may exceed volume sold in processed form. Some of the medium-sized and large plants evolved out of live buyer operations, and may still retain a few old contacts. For all plant sizes, the live market may function as an outlet for surpluses at particular seasons or of particular market classes. For smaller plants, the egg handling operation is likely to be supple- mentary to the delivery of processed poultry to retail-level outlets. As size increases, the operation tends to move closer to the wholesale type. In this study, the two large processing plants handling a large volume of eggs were both cooperatives playing a major role as egg receivers in their localities. A few other plants marketed surplus eggs from their own breeding flocks. Several small plants produced and hatched their own eggs as did two medium-sized plants involved in production of one-pound Rock-Cornish birds. A number of large plants carried breeders and either used local hatching facilities or jointly owned them. 29 s be O a, u 3 0 O s a > Q V s S s CM .a to .S ." 'bb'S O O .g c/) ■ -. o o c 0.3-, u rXJ c c oj o CO aj li c '^ .-i 1-1 f/J Oh 4; ^ to -a bc O 4J ■ncQ CL, C o CO S! 'S CO be ID 'SI 3 bD CO E 3 -3 CO E en 0\ CO LO OS o -^ o o\ OS OS • I-' ¥ O D > O CO CO 5 S o U ^ o m 'fi OJ CO D N I — I p 0) E 3 z CO so OO Os csj P 3 00 "^ ■* CO Csl t^ SO CO >— I P aj E 3 z so CO o CSI I— I O CO C0T3 M 3 1^ 5h 1o CO CM CO o r . OS OS CSl so CSJ in V w o la 61 V ce in -< ^ >-. B h X *a ** "a 0 Cu X 0 'S> tf) 'H V g V C8 0 ;. U, 0, u 61) ,C • M Cfi *i^ Ul d pO 0 *S h *^ On Ik Q h *d T3 "a C 0 « Cu o c tH „ £r •« D c i3 E-= 2'3 3 CO C 3 M n H bJD ■« s s ° 2 2 CO K i; bC bu 3 c bC 3 jj t c« •^ ^"^ s l-l U *"* O bO CO 3 i? .Q tH CO LO CO CM 1— I CO CO cjo bD 3 '% o u O 3 3 o) >-, 5 P ■■£ 3. 2 -z; ® O. 3 ^ X «JC/) 3 3 3 '^ o ti 1) 3 r« QJ CO OJ N I — I Csj Tf CS) LO lO 'S' t^ so 00 ^ ^ so CM LO CO LO LO LO 33.5 i:- co-C M E^ w so CO o 30 Two cooperatives maintained farm supply departments open to the gen- eral public, while a number of additional units handled certain supplies for their growers. One cooperative, whose primary business is feed milling and distribution, and one large independent processor, producing feeds for contract flocks and open market sale, accounted for the milling operations. The tendency of firms processing poultry to engage in additional related business activity has been increasingly characteristic of the industry; so much so in recent years that the concept of integration, primarily vertical, is believed to be generally applicable. The extent of integration appears to be a function of firm size, although precise knowledge regarding this re- lationship is limited. Small plant integration is most likely to be oriented toward one of three stages : 1. Growing (producer-processors). 2. Egg handling (retail-type outlets). 3. Live poultry distribution (surpluses or city locations). Medium-sized plants may retain some small plant characteristics, i.e., they may be jobbing eggs or distributing live poultry on a regular basis. In addition, volume considerations may force them toward direct contract growing or participation in a cooperative deal with a secondary contractor. If we ignore for the moment the producer-processor tie-in, where growing is of major importance, and other fanning operations, then it is readily apparent that large plants tend to be more highly integrated than other size groups. This relates to the combination of assembling, processing, and distributing poultry with extensive contract growing, experimental and breeding operations, large-scale hatching, and large-scale handling of eggs, feed, and supplies. Most small poultry slaughterers carry on slaughtering for sale as an ad- junct to other activities. In contrast, larger plants regard the processing function as primary and build other activities to contribute directly to it. While diversification may be desirable for the smaller plant, a frequent result is insufficient attention to efficient use of resources. Buying and Selling Practices Determining Prices Thirty-one of 42 plants (or 74 percent) reported use of the New York commercial quotations*, along with customary differentials, as a basis for determining buying and selling prices. However, nearly all plants visited received, for market information purposes, both the commercial and USDA Market News Reports. f Several small and medium-sized plants producing their own birds did not determine into-plant values. Others relied on local market information. For selling purposes, markups over product costs, local demand conditions (especially on specialty items), and local market information were used by these plants. The USDA reports an "at the plant" and "at the farm" figure for live birds, by market classes, for a "75 mile area" outside Boston. * The Producers' Price-Current, a daily report of the Urner-Barry Company, 173 Chambers Street, New York City. t Daily Market Report, A. M.S., U.S.D.A., 408 Atlantic Avenue, Boston 10, Massa- chusetts. 31 Buying prices for live birds based on the New York commercial report are generally a specified number of cents per pound below the New York dressed quotation, although many plants now watch the eviscerated market closely. Selling prices may be at, above, or below the dressed quotation, depending on the supply picture, area of origin of the pack, quality differ- ences, and types of outlets. Thus, the actual average margin on which the plant expects to operate, i.e., to assemble, process, and deliver, cannot always be determined by the spread between the live and dressed quotations of the USDA report or by the discount under the New York commercial quotations. In addition, plants which engage in direct contract growing employ vari- ous means to charge these live birds into the processing unit, so that a given plant could be charging in some at a "book value" and others at an open-market price established relative to a published quotation. Larger plants tended to work on a smaller live-dressed price spread, i.e., 4^ a I-f pa ed P -T3 l-H §C/5P-i « H => CD -a c ? 5 ^ ^ ? bj) o2 2 OCL, o LO T3 C w LO o o o o LO rj- 00 O CO CM O CO ^H o to o fO o o Tj" rH O o o C^ CO ^< U CO ^p cs "3 ID C CD ^ CO C O "d I ^ ca ' c D o r-* en -a _' J3 5 1^ ^ X 1^ 2 IH - Oh a tn s^ ^ 4^ 3 1^ ij C O »^ T3 «^^ 2 J3 ca_c «*-t ,^ en o O en 1-^ -a ca a oj 3-c o 0.-0 1^ >^c -^ 3 O _o -a c^i — ' 2 I « a. ■" CJ O O ■" c 3 ^ o (LI C •" (^ en 6 o JJ 3 '55 < 1) C CO . in ^-^ fc o i2 1-1 fcH CK D o .2^ 7-i l-> O 3 t« aj tn C ID -a hh ^^ 'J cd '^ 2-Q >- S^ S = ^ O o t, 3'-' 3Dh <2 «1 Oj N ca WD r- o 2 > C ^ S J u — I Tf O O LO o I— I r-H ■:# Ov CSl O O t^ 1^^ cs •* CO o r-H rj< IS o o eg '^ s ^ C/5 ^ bD 0\ CS "^ c 3 C3 o -O B o o en aj 3 O 3 .s >- c I" tl CO 3 X OJ r— I T3 ») 1-1 >H -Q -a .5 !> t« e 2 -^ 1— ( -a — '.G G . ■" 3 .SO E a. 3 bj] (-1 J^ (U OJ LO OJ c 1-1 -a - ■. ~ ID 0) >->- en . -^ 13 ." ° a tn aj o a-— ' C .2 O aJ "^ a.J3 , S > " tn -r^ n) -a 3 "^ bD ? *.' C a g- en OJ ^ 3 D tn g (D O 3 •" "O -a oj en u a) "3 o en cd •<* en 5C 2 en p 2-2 aj = --TT - 53 3 a M 2 .S a ^.G « „ 2 =^ ^ .— H t/) D (U *-* CJ aoa^3>=50rt I CM rO Tj- lo O t^ 38 Picking and Finishing The small, manually operated drumpicker is still basically the same as when first introduced and machines were observed that had had all parts replaced at one time or another. Newer models have been introduced, some with two drums and with fingers of different shapes and resiliencies for special purposes. Manual pickers and small operations go together. Where these machines were operated by the medium-sized plants they were often used as finishing machines after the birds had been passed across sideline machines. The number per plant varied from one to three. There were single and double- operator units and single and double-drum machines. In sharp contrast to hand-operated pickers are the large automatic machines installed in series in plants with overhead lines. These pickers, together with special neck and hock scalders, have tended to replace the sideline machines. Four was the standard number of these machines used by the large plants without any sideline machines. In the medium-sized plants the number ranged from one to four, together with one or two sideline machines. As the terminology implies, the automatic pickers do not require individual operators. The sideline machines, on the other hand, are generally double-width and may require two operators each. By install- ing one additional automatic picker a processing plant being studied took two sideline machines off the line, thus releasing up to four workers. The basket-type pickers are the latest innovation in the dressing oper- ation. They were observed in operation in a very small poultry and egg store as well as in one of the largest plants. The plants using these ma- chines claimed certain advantages for them: versatility, smaller space re- quirement, a reduction in number of workers, and a high-quality finished product. Where observed, it apparently made unnecessary the quill machines as well as the special neck and hock scalders and pickers. A plant that was remodeling found it could put its New York dressed line, using two of these machines, in a small addition to the present structure and release sufficient area in the original plant to install an eviscerating line. Quill pullers must still be operated manually. Except as noted above, they were used by all of the large plants. Some of the larger plants used two machines with one or two operators each. Only one medium-sized plant, and all but one small plant pulled wing and tail feathers by hand. Other Equipment Singers, washers, and automatic weighers were used by most large plants and by half or less of the medium-sized plants. In-plant chlorination was found in only a few plants. Refrigerated storage facilities were available at most plants in all size groups. However, many very small or small plants, selling at retail or delivering locally, used no ice in cooling or packing. Ice-making machines were used by about half of the large and medium-sized plants, but in only two small plants. Three types of ice were used: crushed, flaked, and slush. With crushed ice, cakes must be unloaded into the plant and fed into the crusher. Flaked ice is made at the plant and accumulated in storage. Both crushed and flaked ice must be hauled in tanks to the points of use. Slush ice is made and delivered through a completely mechanized system to points of use. 39 Hand trucks and roller conveyors were commonly used by most plants with a few larger plants using fork-lift trucks and conveyor belts. Other specialized equipment used in a few plants included: turntables for batteries, aligners for shackles to facilitate hanging live birds, cooling tank dumpers, mechanical lifts to facilitate removal of birds from cooling tanks, and mechanical packing-box closers. AH medium-sized and large plants which eviscerated had powered over- head lines. Except for very small and small plants selling at the retail level, cutting-up of poultry by processors was confined to a few large plants. Less than half of these large plants had separate cut-up lines. Plant Operating Praciices Adjustments in Operations Considerable flexibility with respect to labor and equipment can be built into a processing plant. With a sustained reduction in volume, a skeleton force can be employed, or the plant can be operated fewer days or hours at "normal" rates of hourly output. With above-normal volume, a limited amount of additional full or part-time help can be added to one shift, a second shift added, or the regular force worked overtime at a higher rate of pay. These alternatives represent important problems requiring addi- tional study in connection with economies of scale. Within the framework of a relatively "normal" daily and weekly work load, short-run adjustments can be made. Changes in volume can be met by varying the working speed (changing line speed or skipping shackles), or by minor adjustments in length of work day or labor force. For vari- ations in market classes or condition of birds, scald temperatures can be raised or lowered, internal adjustments made in automatic pickers, side- line machines employed for finishing, or the amount of pinning labor modified. Split-phase vs. Continuous Operations In very small, small, and many medium-sized plants the same crew per- fonns several functions. At least part of the crew which works on dressing may work on assembling, eviscerating, or packing. Usually, such a plant dresses only a few hours per day (until cooling tanks are full). Then, most of the crew may shift over to packing, while others may clean up the dressing area. Hence, in many plants, either with or without an overhead line, operations are not continuous in the sense that all phases are carried out simultaneously. Operations are split into successive phases on which almost all employees are engaged. In small and very small plants a common area may serve several purposes. The implications of split-phase operations in terms of labor efficiency and usage are as follows: 1. With small volume, a plant can employ a smaller crew full-time rather than a larger crew part-time. 2. Employees cannot become specialized in any one phase of the oper- ations, and hence, may be less efficient. This also implies a different social structure among plant employees than under conditions of con- tinuous operation where specialization is enhanced. 40 3. Plants employing S23lit-phase operations can probably turn out as sanitary a product as those with continuous operations and overhead lines. Various phases can be separated by shields, partial partitions, and by time rather than by distance and full partitions. But to do this, relatively more time may be needed for clean-up operations between phases. 4. Split-phase operations are likely to be accompanied by a nearly uni- form hourly rate of pay for all operating employees, whereas with continuous operations (specialization) a differentiated pay scale is likely to exist. Labor ProWems Most plants indicated they experience a moderate turnover in labor. For many, this is likely to be heaviest in a 10-20 percent segment of the labor force. Variable hours and the concept of poultry dressing as a "dirty job" mav contribute to turnover. Small plants rely heavily on family labor, and the small amount of addi- tional labor needed consists of a few long-time employees, local housewives, retired people, high school students employed part-time, and a few "floaters". Many medium-sized plants rely on similar groups. Many of the large plants, while not greatly concerned with the rate of turnover they experienced, made an effort to stabilize hours to keep regular help. Near large cities there is increased competition from alternative indus- tries. Unless higher wage rates are paid to keep a better caliber of help, a higher rate of turnover may exist. Aside from an indication of somewhat higher wages in plants in or near the Boston Metropolitan area, average wages paid, by plant size or area, did not appear to differ significantly. Waste Disposal Practices Most small plants were hauling, or hiring someone to haul feathers, blood, offal, and manure to dumps or incinerators. Half of the medium-sized plants and all of the large plants were able to arrange for Tenderers to pick up feathers at the plant. All of the medium-sized and large plants which evis- cerated were able to get renderers or farmers (mostly piggeries) to pick up this waste at the plant. The same was true for most plants in these size groups with respect to blood and manure. Some plants dumped blood and manure into sewage systems. A few plants were emptying waste materials into open streams or tidewater. Apparently, the more limited volume of waste materials available at small plants was a deterrent to the develop- ment of paying outlets. Added costs for haulage thus accrued to such units,* * For a more complere discussion of pouluy plant waste disposal, see: Kahle, H. S., and L. R. Gray, Utilization and Disposal of Poultry By-products and Wastes, Marketing Research Report. No. 143, AMS, USDA, Nov. 1956. 41 Table 18. Waste Disposal Practices of Poultry Processors Dump or Incinerator Open Render- Farmers Own Stream Hired ing Sewage or City Plant Haul- Plant Plant Pi icked Disposal Tide- Sewage Hauls ing Pick-up Hauls Up System water System (Number of Plants Repor •ting) Feathers: 18 Small 14 2 2 __ 12 Medium 4 1 6 — — — 13 Large — — 13 — — — — Blood: 18 Small 10 2 1 — 2 . — 3 12 Medium 1 1 4 — 4 1 1 13 Large 2 — 4 — 3 1 3 Offal: 9 Small 3 2 1 2 1 6 Medium — — 2 — 4 11 Large — — 8 — 3 Manure: 18 Small 11 2 1 3 1 12 Medium 4 1 — 5 1 1 — 13 Large 5 — 2 1 2 — 1 2 Sewage:* 18 Small — — . — — 8 10 12 Medium — — . — — 9 2 1 13 Large — — — — 4 2 7 * Include waste water from processing operations. 42 IV. Preliminary Estimates of Labor Efficiency and Plant Utilization Labor Efficiency in Small, Medium, and Large Plants On the initial survey data were obtained on numbers and types of em- ployees and number of hours worked. These data represented in most cases "typical" or "average" operations. Hence, in this analysis it is recognized that insofar as each individual plant is concerned any derived ratio repre- sents an unknown point on the individual plant cost curve, and that there may be little or no certainty that it is the true "average" for the unit. Since dollar cost data were not obtained, these preliminary comparisons relate only to volume and hours. The suggested relationships will be tested further in later phases of the study by olDtaining more precise and detailed time and cost data from a limited number of plants of varying size and type and by employing a synthetic method of analysis. Data were initially separated into several categories: (1) management, (2) assembling, (3) dressing, (4) eviscerating, and (5) distributirig (delivery to the buyer). The management category includes such functions as executive, buying, selling, research, personnel, field, cleri- cal, bookkeeping, accounting, and legal services. The assembling category was confined to the pick-up of poultry by the plant and did not include un- loading. The dressing category included unloading, feeding, hanging, killing, picking, pinning, singeing, washing, weighing, cooling, packing, clean-up and maintenance, and loading-out as applicable. The eviscerating category included drawing, cutting-up, weighing, washing, cooling, packing, freezing, clean-up and maintenance, and loading-out as applicable. The distributing category involved the delivery of the finished product to the buyer, includ- ing any unloading done by the delivery crew, but not the full loading labor prior to hauling. Operating categories included direct supervisory employees. Volume intervals in Table 19 were determined by arraying individual observations in ascending magnitude; determining the widest breaks be- tween successive numbers; and computing weighted averages of observations between these breaks. Because of variations in the proportions of various market classes handled, the series on pounds and head count shows slightly different progressions. Management The allocation of management cost to operating functions for any size of plant poses difficulties. Such an allocation can be made in several v/ays, i.e., proportionate to physical volume, proportionate to dollar volume, or by recorded time sampling. With respect to smaller plants, it is difficult to make an initial separation of the owner's time between managerial and operating duties even on an aggregate basis. An allocation of management (other than field men) was made to operat- ing functions on the basis of physical volumes. With this method there was little reason to conclude that management time was other than a fairly constant ratio to operating labor as plant size increased. 43 Assembling Data derived on output per man-hour in the assembling operation were somewhat less conclusive. These results contained and obscured certain vari- ables. For example, it would be expected that output per man-hour would decline, other things being equal, as the volume of birds assembled in- creased. Since other information presented earlier shows that larger plants tend to reach farther for supplies, such a relationship would tend to be inverse with volume. However, smaller plants are likely to be oriented to- ward procurement in small quantities and a greater number of lots per given load. Hence, the smallest plants might be handling relatively more small and partial loads and, other things being equal, be less efficient be- cause of small volume. Indeed, the data indicate some increase in output per man-hour through the first few intervals covering small plants where supply areas were similar. Data obtained on other commodities suggest that output per man-hour may often decline with large crews. This is due in part to the loss of working time in travel and preparation as well as to the presence of more help than can be used to best advantage at all stages.* This may also be involved in assembling poultry, though time disadvantages in assembling could be offset by cost considerations involving equipment and subsequent plant operations. As previously pointed out, contract growing, and in particular a large share of the time of field men, is a substitute for buyers and public relations measures. When the time of the field men was allocated to the assembly operation, such units appeared substantially less efficient in this operation than plants of similar size which did not engage in direct contract growing. In lieu of direct contracting many large plants have attempted to stabilize plant volume at a high level by entering into arrangements with secondary- contractors (feed companies, hatcheries, or independent investors). New York Dressing and Eviscerating On the basis of these data it appears that output per man-hour of labor increases rapidly with unit size (volume). This suggests there are substantial economies of scale insofar as labor usage is concerned. It cannot be ascer- tained from preliminary data exactly how this conclusion might be modified by the effects of investment and depreciation of buildings and equipment or other cost components attributable to the dressing and/or eviscerating oper- ations. If substantial economies of scale exist relative to output per man-hour in dressing and eviscerating, then larger plants might well afford lower output rates on assembling to obtain supplies needed for continued plant operation at a high rate of potential capacity. Not only can they reach out over greater distances, but they may be able to employ larger crews, even though out- put per man-hour in assembling might be lower than with smaller crews, to keep the assembly operation feeding volume to the plant. *See: Rogers, G. B. and H. C. Woodworth. Distributing and Handling Grain-Feeds in New Hampshire. H. Problems in Retail Distribution, New Hampshire Agricultural Experiment Station Bulletin 427, July 1956, pp. 28, 32-33. 44 Table 19. Output per Man-Hour: for Various Unit Operations, Excluding Preliminary Estimates Management, by Unit Size Operation Mostly Wh olesale N. Y. Dressing Eviscerating Distributing Average Number Average Number Average Number Basis of Number Per Man Number Per Man Number Per Man Computation: Per Week Hour Per Week Hour Per Week Hour Pounds 2,100 27.1 297 18.6 6,473 55.0 6,223 32.1 6.206 368.7 11,128 80.5 — — 13,670 729.1 33,390 84.9 28,440 .54.7 51,801 1,172.9 87,980 86.4 77,858 67.4 — — 238,613 139.7 — ■ — 178.236 1,411.1 352.600 164.8 386.900 89.4 342.423 1,617.7 498,952 188.3 • — • — — Number 875 8.6 .571 5.9 987 69.3 of Head 1,326 10.7 1,501 7.2 1.525 77.6 2,351 16.5 — — 2,607 130.3 8,965 18.3 6.546 12.6 8,596 214.9 25,040 20.2 20,126 17.4 15.699 299.0 64,770 33.9 44,552 20.4 47.673 376.4 101,970 45.6 - — — 86,510 408.7 140.300 52.4 122,907 22.8 Distributing Output per man-hour in distributing (largely hauling time) tends to rise with volume. Some smaller units concentrate on selling to small volume purchasers, such as stores, institutions, or local distributors. In such cases, with more stops and smaller quantities per stop, output per man-hour is lower than for units of like size delivering to large volume purchasers, such as wholesalers, chain warehouses, and packer branches. For firms selling mostly to large volume purchasers, output per man-hour tends to increase with volume, despite the probability of longer average distances. Since dis- tributing is a one or two-man operation, size of equipment rather than number of men being the greater variable, the data show a more conclusive trend than on assembling. Larger equipment can be used in distributing, as well as in assembling, as volume increases. When this occurs it may be profitable to use additional labor to offset increases in costs associated with equipment which might otherwise be incurred. With respect to distributing, the data suggest the existence of econom.ies of scale, but they represent a composite of several factors, i.e., volume, distance, types of buyers, etc. Volume seems to exert the greatest influence, since the output per man-hour rises with size inter- vals. With a delivery crew of one or two men, use of larger equipment enables the handling of greater volume. This effect, plus a greater concen- tration on large volume buyers, is apparently greater than the negative effect of increased distance and travel time. 45 Labor Efficiency in Very Small Processing Units Data obtained for these plants were in considerably less detail and not standardized to the same degree as that obtained for larger size groups. Many of the labor figures were related to sub-operations, such as killing and picking or drawing, occurring within the plant, rather than to the broader operations within and without the plant. Some of the problems encountered in trying to compare these data are that they may include various proportions of time for such functions as waiting on customers, when retail selling occurs on the premises; work methods may be significant- ly different, at least when compared to medium and large plants; and, the data are less inclusive than for small plants, even though methodology is similar. One example of this was the almost complete omission of unloading and feeding from the very small plant data related to the dressing operation. Maintenance was also generally excluded. Particularly in poultry and egg stores, dressing and drawing individual birds to order was widely practiced, as distinguished from the types of operations in small, medium, or large processing plants. Many very small plants, particularly poultry and egg stores, used a walk-in cooler, freezer, or a cabinet refrigerator and wrapped without ice, as compared to ice or water cooling and ice-packing in boxes. There was little or no singeing or washing (prior to cooling, where immersion in water is used). Pinning was eliminated by some units using higher temp- eratures in scalding, longer buffing (even though abrasion was increased) or other modifications such as dipping in Avax or rolling in sawdust. In some plants, time devoted to cleanup was insufficient to achieve even a reasonable semblance of sanitation. By shortcutting, many very small plants improved their competitive position vis-a-vis output per man-hour, but this can con- tinue only so long as buyer acceptance is not impaired or formal sanitation requirements are not enforced. Utilization of Plant Capacity Using data on annual volume and on the number of birds or pounds handled per hour under typical operation, estimates of the relative utiliza- tion of plant capacity were derived. Herein, these estimates are expressed as percentages. Basic to their derivation are certain assumptions or standards applied equally to each plant: 1. A 40-hour work week, 52 weeks. The annual operating hour figure of 2,040 also makes allowance for 5-6 paid holidays. It is also assumed that vacations will be taken in rotation, not en masse, since regular and con- tinuous plant operation is usually desirable. 2. That the assembly and distribution functions are flexible enough, on the one hand, to supply any quantity required and, on the other, to readily dispose of the plant output. All functions are assumed to be geared to the normal "line speed" (or, for plants without lines, to normal output per hour in the dressing and/or eviscerating operation). 3. No attempt is made to adjust individual plant layouts or practices toward maximum efficiency. Ratios derived herein merely reflect the degree of utilization under the present arrangements. 4. A similar distribution of market classes is assumed to prevail at capacity as now prevails with present operations for each unit. 46 On the average, percentage utilization of processing capacity increases with size. Within the groups themselves there is considerable deviation from the average, indicating differences in the emphasis on processing and on distributing at levels above wholesale in allocating employee time, in lo- cation, market classes handled, and in the extent to which management has been successful or willing to go in keeping the processing set-up operating. AilOVdVD INVld dO iN30y3d 0 2-S 4) « ^ b £ 0 5 -Q — ^ * «4H >% 0 ,a ;: "B 0 UJ llJ 5 .a -2 a: .3 S hJ o iJc < R V Ul U V I « h z t4H & < 0 10 o X K .5 C8 UJ S^ S 0 tt 3 o s s 0-s > u es 4> b h- V <£ ^ V -J 0.2 Q- > V cr> -"2 cs S S cs m ^ M V s .PN (« >^ Sfi h V es ^ a-c •^ »— c .PN ^-< V b Oh • M a u S St av3n a3d sanoH mvw 47 Smaller plants may conduct part-time operations by choice, i.e., emphasis on retailing and jobbing rather than wholesaling. Those small and medium- sized plants which concentrate on fowl and roosters are likely to show wider seasonal variations in volume than plants concentrating on broilers and other young chickens grown and sold throughout the year. Hence, capacity may relate to the seasonal peak in volume. Many of the obtained estimates of capacity based on line speed or volume per hour probably overstate the sustained rate of operation of the unit with the result that the percentages of utilization of capacity may be somewhat low. Rated capacities are frequently maximums and do not reflect sustained working speeds of employees or the increased maintenance which might be required on equipment. Again, even after the best of planning, it may be virtually impossible to anticipate the occurrence of breakdowns and other incidents which would reduce maximums to practical rates. The data do suggest the existence of excess processing capacity. Such ex- cess over current volumes processed could be used to process poultry which now moves out of some of the particular areas included in the study and/or allow for some increase in production above current levels. These data relate only to plants in the small, medium, and large brackets. Excess capacity also exists in very small plants, probably to a greater degree on the average than for small plants. The absolute magnitude of plant and equipment costs or their ratio to volume may also hold some clues with respect to the lower rate of utilization of capacity for smaller plants. Large plants face very substantial fixed costs related to plant and equipment, and because of the magnitude of these, will try to maintain volume at a high level to defray these charges. With smaller plants, these fixed costs are much smaller in magnitude, even though they may be greater per unit of volume than in larger plants. With given labor resources (including unpaid family and operator's labor) the small operator may feel he can maximize his total returns by emphasizing phases other than processing. Indeed, he may be unable to expand plant volume without adding more paid resources in terms of labor or payments to others for assembling or distributing, or without maintaining a larger investment in plant and equipment if operations are seasonal in nature. Table 20. Utilization of Plant Capacity by 32 Poultry Processors Average Number of Head Number of Plants Handled Per Year Full Capacity Per Year* Percent of Capacity 10 6 5 5 6 32 81.100 693,500 1,444,400 4,001,800 6.370,550 223.380 1,710,200 3,060,000 5,548.800 7.140,000 36 41 47 72 89 * Based on line speeds and/or number per hour in plants without overhead lines. 48 V. Appendix Commercialization Scoring In establishing the degree of commercialization of poultry meat production in individual counties of New England, six measures of aggregate volume, average unit size, and density of production were used. These were total number of hens, roosters, pullets, etc., sold; total number of broilers sold; number of hens, roosters, pullets, etc., sold per farm reporting; number of broilers sold per farm reporting; number of hens, roosters, pullets, etc., sold per 100 acres of farm land: number of broilers sold per 100 acres of farms reporting; number of hens, roosters, pulleLs. etc.. sold per 100 acres of farm land; number of broilers sold per 100 acres of farm land. Under each of the six categories, data for the 67 New England counties were arrayed in descending magnitude. Inters-als shown in Appendix Table I were derived on the basis of distinct breaks in the array and point scores assigned for seven frequencies. Since broilers (Census classification) and related classes account for about 75 percent of the poultry meat production and hens, roosters, pullets, etc., for 25 percent, the accumulated point score for broilers was multiplied by 3 to give the proper weighting in terms of supply. In order to convert scores to a percentage of 100 (index basis), the accumulated and adjusted point scores were multiplied by 1.388, it being possible for the county scor- ing "6" under each category to obtain an adjusted score of 72, i.e. Hens, rooslers, pullets, etc. 6-]-64-6 ^ 18 Broilers 6+6+6 = 18x3 =54 72 100 72 = 1.3888 For purposes of designation in the study, those counties with an index of 0-39 were described as non-commercial; 40-69, as semi-commercial; and 70 and over, as commercial. 49 h s s 0 0) C V 3 h © U Q ^^ C3 61 S c -c •p* • ^ M > s S bl HN V M V s 0 • m b ^ 0 z «M s 3 V ns 4-t en 2 tL *< C3 p« V • P4 0 S 5 o Cn ON On ON On On (T) 0\ ON On ■^^ ON On_ "O tfi i-T Tf' r-" (m" vo' i-h S r-H ,— 1 (N =^ o6 o o6 6g o o o o o 2 o o o^ lo o, R *o S-i ffl cs lo' co' csf r-' g^ t/> o OC/j , CI o m O c« OS aj en 3 SPh 4-t O •oS PhCD cu On ON ON On ON On ^ Tfi •* ON ON ON ON " i-H CNJ r}- CO •* -a rH C O O O o o o * LO lo o o o o r— I CO LO 0\ O LO > o 0^ ON 0^ 0^ O^ ^ ^ T*< On >* ON On 0\ '- I— I f— I (M CO "3 o o o o o o o LO O LO o o 2 1—1 I— I 04 CO ^T^ > ON ON ON ON ON ON O On ON ON On 0\ 0\ -a r— ( CO LO t~- CN CO 2 I— r 03 O O O O O O O o o o o o o CS) Tj< NO CO o ■* On on ON ON On^On On" On LO ON O C O O ON ON ON ON 0\ ON ON ON ON ON o o o o o o o'o o o CSI LO On On -^ On ON (u ON ON >. ON On O ON ON -rt ^.°^, C 1 — ^ I — I cd O O O o o o o o o o o o o o o On ■^ O r-TCNJ" On on ON ON ON ON on" ON I — I LO o o O O On On On On On ON On On On_ On On ON I — I On On p— ( r— I CNJ O O O o o o o, o^ o_ o" o" o" NO CM O r-1 CJ On Oj On > ON O On -O ■— ' C "* c3 So O o S "^ CO Tf O i-H CM CO •* LO O 50 HI 'a 3 0 h o S M (Ti u 0 fj a S 0 [ft C5 s u 0 J3 H s a c/) 3 ca c75 Q + 3 'a, 3 CD OS O O • r; 1— I 3 a o C o o Hi 'S If m o ocO'*r-t~-i— iLor^cM lO r-H r-; CO ■<* p CM_ i-H CM r-; o p CO •^_ r~. r~. ocm'i— ! p— (ovdfocMf-^ 'c-ar--'o co s + + I ++++++++++++ I + 0) OJ CO ca -c -a Uj OJ JJ dj £ OJ OJ (U OJ lU 0) jj 4) nj nj U IB 3 aj o o £ s s fc O o o o o o o o o o o £ 3 3 S s s E s s E s \OCOr-i— ir^CMCMCO CO vOcOLOCOOOr^LOt-~c0^vOCT\i-H>0 bJ3 ID 3 '3 -a -5 § S S 3 >f 3 CJ o OJ CJ 3 3 a ca dj V o >^ -5 S o o o 3 ,3 X cL; 2 CJ 3 O Cr-3 ca ca .-. CO i« 3 J- O *^ *- ca ca ^ 51 V X 0 s. be s o o to SB 0 0 s s w «: "a! PS 0 CI + 3 o O ■ - OS JS I— I 3 o " 3 1^ £-=^ CJ o I-H 1> 4-1 U V m t-i -c i co' 3 + +++ I -3 3 3 o Oh 3 O Tf r-r-vooor—fi— itJcO t^ ' ' I— ! * ' Tt CO NO 2 + + + + ■++ -a 3 3 o 3 O lC coon,— inOnOOncOOSu^cO r-; CO t--; t}< (-^ CO p O On LO rH LO ' r-J c4 ' * CO r— ! lO esi s + +++ ™ .2 '-a "^ 0) Oji ^ ^ Q^ 5j cy CO CO ccj cd -3-3-3-3-3 DajJiajDOiiuajajiu SogooESESS ^3^3 c^l^lJ'l^l) ;d:; = c5f:£^^^^.a e-1 COCO'^r-jC^i-HVOOlOr— I F — ! r— ICO^^OO"— tOrHCOf— ^ MCOp— It^LOi—ti— ICOLONO ^ LO t-- I-H t- lO CO NO CO CO ID b4 CO _ C S e '='^^ii « n-O CQ U CJ CJ O E ^ a:i -yj c/j 52 00 o>Ti'rf"ro'OOcOi— it-^"— i^fOO^"— ' r~- 1— (Cvjcsi^o CO 1— (I— icsiTt'3'Cvi'j' Tf" vOOOOOOvOi— iLOi— lO>OO^C^^CO TO 1— lOcOOOr^OOCOcOt^'— ;OOv + + I + ++ ++ CO LOrO-^cOOOO'*'— lOOoOOOC^ + +++++ I ++++++++ o 0<— '•*!— l■^^Ct^voO'f•^0«^0^'— I •cf'^OfOt— (vDOi-HCO'^COTfi— ICO + + -3 V DO) -3 -3-3 t)4Jqji>a^3j(1^01J4J^D2^'^ fo » (wr-i-HOOi-Ht--;!— ;r-^eor--;r~-_co o oooooooooo'ooo o O ca D el's aj ca -C _C ^ ^ -' ^ — S -, nj ca c d o ^ C 2 p « (11 f— ' rfi ^ r- (U '^ t/j j:; r;; U, >_ d CO.; 'o Oj c3 -C f/j i_( J- rt >-« t-" '-' '--^ --^ ---^ 53 O © u S 0 fcf « C3 Ml "a as 0 »1 o 0 s .2 u en t« B J3 "V « s 0 0 H •3 & 3 o Q o + 3 3 ON 03 o o -^ LO ■-H 3 o- o _ 3 o o -o (XI 3 a 3 r- nj O 13 Oh 3 tiH-a _o CJ ■p -a t« -— - 005^ *^ 3DhUt3 ^ ^ tfi ^ " CTn o ij C 3 ' ofa o ■^ '-I CA) o ^ 3 >r "5 3 O c7^ u -a 3 C3 c/) 3 O 0\ 2 'J"' t^cO(MvO(Mooa3COLOCO(Ma\t^^O T} + 1 I + I + I + + «^ 3 3 O P-, 3 o V.O ON I— IVOOsr^CMCslLOvO'^COCOCOI-O ONt— HTj->j _^ '•'^ _4 '■■J o-a o-a o-a o-o 3 3 3 9J bX) 3 bC 3 « 3 tl^ 3 OJ 3 ID 3 (U C/) r/) ri5 fO 3 3 3 3 0000 3 3 3 3 .S^ 3 .£P 3 .Sf.SP.5P.'* COJC OJCCSS 0000 jqOnqcj^iicjH^iu^acjcjcj ca p—JONr— ILOt^CqONT}ocO'^LoeOLor~- r^t— ^r- 3 o 513—1 ca i> fcn 3 3.^2'^ -=^ 3 (U _3 J^ ^ ■" «i^ n a= 3"^ o;5 J^ S 3 3t3 3^ «tC cafe'a3S2=oca"-ca o _>p 3 « 54 LO I— I o _ - O, LO LO LOt^OS'-HONCOONLO cofOt^o^o^(^^r^■^ CO CO + c-^ o o (M a\ 1— I CS I— I CO ++ I +++ >0 OOsCTnOn\OOi>)0 LO Tj; lO r~; -fj; -< CO in e^_ c>i sq vq >-; CO t--; CO i-Hi-Hi-hOi-hlocoO coesivoi— ico^fcoov tJivocovOlOOnOOOs o u C bC t! 1^ C rr o-a-=5 2 *. a-gj3 .2 c ^ o S -a o o O r— I I— 1 — o ^ G ^« o 3 ■:: ® S o .S o .- >-i CNl o >^ c ^^ *-• ^ IB 2 o-g tn lU lO «-' .s >^ . « 3 -a ;2 CO ,• --^ > o o ® . W ») t- •S < 3 § * . « s 3 «^ 5 3 „ 2 <= =^ s I * c © OJ -o O ." 3 3 a as. 3 <=' ^ O ^^ 3 o o O cS m -a D o 3 •- 3-fi ." 3 "* 3 i« 03 -a:;3 « g B LO C CM .5 CM _4J O c a 3 o tn -3 * •S •13 « «) 3 a< "i o 2 <=> a. i-H e o 3 a o o. nj o LO OS 4) c o 3 o D. O o bD u ^"^ cn 3 O v 1-1 T3 rv v tfi ID -o 3 ja . 3 c/i O tH o "3 <=^ Sio OS ^ 3 « 5 si SI •^ 2 !5 ON s p ^ * o ::3 .5 LO fl •< Os ns - i-H J •. 3 *- i" O, 3 en B 3 O o o O-a CM en CO o o 3 at # H— 55 Appendix Table III. Adjusted Estimates: Number of Slaughtering Units in Sample Areas by Type and Proportions of Volume Slaughtered 1950 Area Total Pi -imary ' Type of Business Poultry and Area Population Units Producers Egg Stores Processors Others^ Number Number of units 1 131,971 14 11 — 2 1 2 256,198 24 8 2 10 4 3 368,267 45 20 5 15 5 4 2,574,315 96 30 42 13 11 5 251,289 29 12 8 6 3 6 1,006,504 61 24 25 6 6 Total 4,588,544 269 105 82 52 30 Primary Type of Business Estimated Poultry and Area Slaughter Producers Egg Stores Processors Others^ Pounds Percent of area estimated slaughter 1 282,200 78.0 — 20.2 1.8 2 115,596,591 0.1 0.1 99.7 0.1 3 32,568,385 1.1 0.5 98.1 0.3 4 46.253.465 2.2 2.8 92.4 2.6 5 64,659,249 0.4 0.3 99.2 0.1 6 36,106,758 2.6 3.3 92.0 2.1 Total 295,466,648 1.00 1.00 97.25 0.75 1. Live buyers, locker plants, retail food stores, restaurants, custom processors. 56 Appendix Table IV. Operations of Eviscerating Plants^: Volume, Number of Units, Market Classes, Supply Sources^, and Market Outlets by Size of Operation Total Percent Distribution by Market Classes Broilers Heavy Fowl Eviscerated and Young and Size Groups and cut-up Units Fryers Chickens Roosters Total Thousand Pounds Number 1 414 15 64 25 11 100 2 1,445 5 71 5 24 100 3 5,375 3 77 15 8 100 Total 7,234 24 75 14 11 100 Size Group^ Consumers Percent Distribution by Types of Buyer Stores and Restaurants Wholesale Receivers Other Wholesale Outlets-* 1 2 3 Total 87 54 16 13 22 4 7 19 14 24 77 63 1. Non-slaughtering plants, plus a few slaughtering plants which purchase supple- mentary supplies in New York dressed form. 2. Practically 100 percent of birds bought as New York dressed were obtained from slaughterers. Hence, details by supply sources not shown. 3. Size group 1: Less than 100,000 pounds dressed weight annually. Size group 2: 100,000-525.000 pounds dressed weight annually. Size group 3: Over 1,000,000 pounds dressed weight annually. 4. Chain warehouses, packer branches, jobbers, hotel and institutional supply houses. S7 Appendix Table V. Some Derived Performance Rates^ for Very Small Poultry Processing Units Operating for Very Short Periods Number of Birds Function Included: per Man-Hour Nev^ York Dressing: 1. Hang, kill, scald, pick, pin. weigh, cool, pack, ice, accumulate, load-out, clean-up, miscellaneous 10- 2. Hang, kill, scald, pick, pin, weigh, cool, pack, ice 12 3. Hang, kill, scald, pick, pin, weigh, cool 20 4. Hang, kill, scald, pick 36'^ 5. Pick 60 6. Hang, kill, scald, pick, pin, weigh, cool, pack, ice, accumulate. wait on customers, clean-up (some eviscerating) 2.5-6.0 Eviscerating: 7. Draw and/or cut-up, weigh, wash, individually pack, freeze, accumulate, load-out, clean-up 6.0 8. New York dress, draw and/or cut-up, weigh, cool, pack, ice. accumulate, load-out, clean-up 7.5 9. New York dress, draw and/or cut-up, weigh, cool, pack, ice 8.5 10. New York dress, draw and/or cut-up, weigh, cool 11.5 11. Draw and/or cut-up, some cooling 27.0 1. Not including overall managerial and office functions. Figures shown are for units operating 1-2 hours at a time, and change between the extremes as length of work period and number of people increase. Data from which figures obtained not always precise as to function included. Data cannot be expanded by multiplication by volume. 2. Miscellaneous duties might include ice crushing, box and liner readying, moving crates, batteries, etc. Clean-up time is likely to remain fairly constant, accumulating and loading to increase at a decreasing rate, miscellaneous tasks to be somewhat pro- portionate to volume. 3. On a one-picker operation, employee hanging, killing, and operating scalder is likely to have some time for miscellaneous duties. These might involve ice crushing, box and liner readying, moving crates and batteries, etc. With 2 or more people picking, such employee (s) would be occupied full time at tasks listed. 58 630.72 N532 no. 426-450 DATE DUE W0V4 .fi4 iAY 19^ Se,. :...^ ^^V.ga'sg r k F32«